{
  "status": "completed",
  "applicable_count": 1,
  "completed_count": 1,
  "failed_count": 0,
  "schema_version": 1,
  "config_hash": "f89d97e368673692",
  "data": {
    "floor_plans": {
      "fp_rooftop_outside": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_rooftop_outside.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan diagram of a modern Korean coastal urban rooftop exterior. The diagram must look like a clean CAD plan or IKEA-style room layout sketch: white or off-white background, single-weight black outlines, simple geometric symbols only. Use flat pastel solid color fills with no blending: main rooftop deck pale gray, stairwell bulkhead pale beige, water-tank utility zone pale blue-gray, clothes drying zone pale lavender, adjacent building/window strip pale warm yellow. Show a low parapet enclosing the roof perimeter, a rectangular stairwell bulkhead in the northwest, an iron roof-access door on the south side of the bulkhead with a door swing arc, a small vent window on the west wall of the bulkhead using double parallel lines, a raised rectangular concrete platform in the northeast, a circular rooftop water tank centered on that platform, utility pipes along the north side, a roof drain near the southwest corner, and two clothesline poles with parallel clothesline strokes in the southeast. Add a narrow adjacent building edge beyond the east parapet with a simple window opening and a small ledge/perch symbol for a cat position. Reflect practical modern Korean rooftop layout conventions: compact stairwell bulkhead, roof-access steel door, water tank and pipes grouped at the service side, clothes drying near the open parapet edge, and simple drainage slope indicated only by drain placement, not by visual effects. Place small white circles with black outlines and black numbers 1 through 14 exactly once each at the corresponding areas and objects; do not write item names next to them. Area labels may appear only as short generic English words inside colored zones, such as ROOFTOP, STAIRWELL, UTILITY, CLOTHESLINE, and WINDOW. A small north arrow with the letter N may appear in one corner. Do not draw camera icons, field-of-view cones, characters, weather, fog, blood, symbols, or decorative horror effects. Strictly avoid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, and material rendering."
      },
      "fp_courtyard_stairs": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_courtyard_stairs.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan diagram of a modern Korean coastal villa exterior approach: villa yard, outer road, exterior stairs, and rooftop approach. The drawing must look like a clean CAD plan or IKEA-style layout sketch with single-weight black outlines on a white or off-white background, geometric symbols only. Use flat pastel solid color fills with one consistent color per zone: Outer Road pale gray, Courtyard pale beige, Villa Footprint pale muted green, Exterior Stair Zone pale lavender gray, Rooftop Approach Landing pale blue gray. No gradient, no blending, no drop shadow. Strictly do not use 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, or material rendering.\n\nOrient the plan with north at the top and add only a small north arrow with the letter N in one corner. The outer road runs horizontally along the south edge. A low boundary wall separates the road from a compact rectangular courtyard. A simple metal street gate is centered on the south wall, opening into the courtyard. The villa building footprint occupies the north and west sides of the plan, with its south facade facing the courtyard. Place a hinged entrance door on the south facade, drawn open with a door swing arc. Place a sliding window on the same courtyard-facing facade. Along the east side of the villa, draw an exterior stair run rising from the courtyard toward a small northeast rooftop approach landing; show the stair treads as simple parallel lines and place a handrail along the outer edge. Add a rooftop access door at the landing. Include modern Korean villa exterior practical details as simple plan symbols: wall-mounted porch light near the open entrance, CCTV camera overlooking the gate and courtyard, gate intercom keypad, recycling bins in a courtyard corner, and a marked police vehicle stopping zone on the road outside the gate for the siren scene.\n\nUse numbered markers only for objects and zones: place a small white circle with a black outline and a black number at each listed element location. Each number appears exactly once. Do not write object names beside the markers. Short generic area labels may appear inside the colored zones only: Outer Road, Courtyard, Villa, Stairs, Rooftop. No other text or annotations inside the drawing. Number placements: 1 Outer Road area at the south edge; 2 Courtyard yard in the center; 3 Villa building footprint on north and west; 4 Exterior stair zone along east side; 5 Rooftop approach landing at northeast; 6 Street gate in the south wall; 7 Open entrance door on the villa south facade; 8 Rooftop access door at the landing; 9 Sliding window on the courtyard facade; 10 Low boundary wall around the courtyard; 11 Stair handrail along the outer stair edge; 12 Porch light beside the entrance; 13 CCTV camera on facade corner overlooking courtyard; 14 Gate intercom keypad by the street gate; 15 Police vehicle stopping zone on the outer road outside the gate; 16 Recycling bins in a courtyard corner; 17 Small landing light beside the rooftop approach landing."
      },
      "fp_living_kitchen": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_living_kitchen.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic 2D floor plan diagram of a compact modern Korean coastal apartment living room with kitchenette. The image must look like a clean architectural CAD plan or IKEA-style room layout sketch: single-weight black outlines on a white or off-white background, simple geometric symbols only. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealistic style, no rendered look, no lighting effects, no textured surfaces, no material rendering.\n\nUse solid flat pastel color fills with no blending: Living Room area pale yellow on the west half; Kitchenette area pale green along the east wall; Dining Nook area pale peach at center-east; Entry Zone pale beige in the southeast corner. Area labels may appear as large simple English words inside each colored area: Living Room, Kitchenette, Dining, Entry. Add a small north arrow with the letter N in one corner. Do not place any other text or annotations inside the diagram.\n\nRoom geometry: a small rectangular one-room living-kitchen apartment, slightly wider east-west than north-south. Place the entry door on the south wall near the southeast corner, drawn with a standard door leaf and swing arc opening inward. Place a large sliding window centered on the north wall, drawn as double parallel wall lines; it should be clearly openable for later open-window scenes. Put the compact linear kitchenette along the east wall, with a counter containing a sink symbol and a two-burner stove symbol. Put the refrigerator near the southeast part of the east wall beside the entry zone. Put a small shoe cabinet just inside the entry, reflecting a modern Korean apartment entry layout. Place the living area on the west side: a two-seat sofa against the west wall facing east, a low coffee table in front of it, and a TV/media console on the north or northwest wall visible from the sofa and dining area. Place the dining nook between living room and kitchenette with a small rectangular dining table and two simple chairs. Add a wall-mounted air conditioner symbol high near the north wall above or beside the sliding window. Add a thin curtain or blind rail line at the window.\n\nInclude plot-critical visual devices as schematic plan symbols only. Put a small framed photo symbol on or above the TV/media console. Add a dotted muddy footprint trail as small flat footprint icons running diagonally from the sliding window toward the entry zone. Add a central ransacked scatter zone around the coffee table and dining table using a few simple flat paper-like rectangles and one disturbed chair outline; keep it schematic, not messy artwork.\n\nEvery area, furniture item, opening, prop, and plot device must have exactly one small white circle marker with a black outline and a black number. Use the following numbers exactly once: 1 Living Room area, 2 Kitchenette area, 3 Dining Nook area, 4 Entry Zone area, 5 Entry door, 6 Sliding window, 7 Sofa, 8 TV and media console, 9 Low coffee table, 10 Dining table, 11 Pair of dining chairs, 12 Kitchen counter with sink and stove, 13 Refrigerator, 14 Shoe cabinet, 15 Wall-mounted air conditioner, 16 Framed photo, 17 Curtain or blind rail, 18 Muddy footprint trail, 19 Ransacked scatter zone. Do not write these labels in the drawing; only show the numbered circles."
      },
      "fp_main_bedroom": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_main_bedroom.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Square 1024 x 1024 image. Create a simple flat top-down schematic 2D floor plan diagram, clean architectural CAD-like room layout sketch, single-weight black outlines on a white or off-white page. Show one larger modern Korean main bedroom as a rectangular room centered on the canvas. Fill the bedroom area with one pale blue solid color and add the short area label \"Bedroom\" inside the colored area. Add a small north arrow with \"N\" in one corner. Use modern Korean apartment bedroom layout conventions: an entrance hinged door on the southwest side, a large exterior sliding window on the east wall, a curtain rail just inside the window, a wall-mounted air conditioner near the exterior window, a built-in wardrobe along the north wall, a low queen platform bed suitable for heated-floor living with pillow blocks at the west headboard, a small bedside table, a vanity dresser with mirror, a simple chair, and clear floor space around the bed for overnight waiting. Draw furniture and openings as simple top-down symbolic glyphs: bed as a rectangle with pillow shapes, wardrobe as a long rectangle, bedside table as a small square, dresser as a rectangle with a narrow mirror strip, chair as a small square, door as a wall break with a swing arc, window as double parallel lines in the wall, curtains as thin curved or straight lines. Furniture and openings should use white fill with black outlines. Place small white circular markers with black numbers exactly once: 1 in the bedroom area, 2 on the bed, 3 on the bedside table, 4 on the wardrobe, 5 on the vanity dresser with mirror, 6 on the chair, 7 on the sliding window, 8 on the curtain rail and curtains, 9 on the entrance door, 10 on the wall-mounted air conditioner. Do not add any other text, object labels, camera icons, arrows, decorative symbols, people, or scene action."
      },
      "fp_small_bedroom": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_small_bedroom.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a compact modern Korean small bedroom. The drawing must look like a clean architectural CAD plan or simple IKEA-style room layout sketch: white or off-white background, single-weight black outlines, geometric top-down symbols only. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, material rendering. Use one solid flat pastel fill for the only room area: pale blue for the Bedroom. Keep the room a small rectangle, about 2.8 m by 3.4 m in proportion, with a thick black outer wall outline and a simple generic area label reading Bedroom in the center. Include a small north arrow in one corner. Place an inward-swinging hinged entrance door on the south-west corner. Place a modern sliding window centered slightly west on the north wall, drawn as double parallel lines in the wall. Place a simple curtain glyph just inside the north window, spanning the window width. Place a low single bed along the west wall, head at the north-west side, drawn as a rectangle with a pillow shape, leaving open floor space typical of a compact heated-floor Korean bedroom. Place a backpack area near the south wall close to the entrance, plus a second shifted backpack position slightly inward toward the center. Leave a broad plain wall section on the east wall opposite the bed, with a small photo symbol on or against that wall. Mark a floor incident zone on the north-central floor beside the bed and below the curtain, plus a small trace zone between the curtain and that floor zone. Mark a red circle manifestation reference zone near the plain wall/photo side without drawing any large written label. Every persistent prop, furniture item, opening, and plot-device zone must have a small white circular marker with black outline and a unique black number, used exactly once: 1 bedroom area, 2 entrance door, 3 sliding window, 4 curtain, 5 low bed, 6 original backpack spot, 7 shifted backpack spot, 8 plain wall area, 9 small photo, 10 floor incident zone, 11 trace zone near curtain, 12 red circle manifestation zone. Do not put any text inside the plan except the generic Bedroom area label, the small N north arrow, and the black numbers inside the circles."
      },
      "fp_bathroom": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_bathroom.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan diagram, like a clean CAD plan or simple IKEA-style room layout sketch. The plan shows one compact rectangular modern South Korean coastal urban apartment wet-room bathroom, about 2.0m by 1.6m, with fixtures close together and no bathtub. Use single-weight black outlines on a white/off-white background, geometric shapes only. Fill the entire bathroom area with one solid flat pastel pale cyan color. Add only the short area label \"Bathroom\" inside the colored area, plus a small north arrow with \"N\" in one corner; no other text annotations. Place small white circular markers with black outlines and black numbers 1 through 11, each number appearing exactly once. Use top-down plan symbols: door as a wall break with swing arc, window or vent as double parallel lines in the wall, sink as a compact oval/rectangle basin, toilet as a standard plan symbol, shower as a wall shower head and hose, drain as a small circle, towel bar as a thin line, mirror as a thin rectangle on the wall. Layout: number 1 marks the bathroom area at center; number 2 marks a hinged entrance door on the south wall left side swinging inward along the west side; number 3 marks a compact vanity sink on the east wall upper-middle; number 4 marks a wall mirror directly above number 3 on the east wall; number 5 marks a simple flat crimson ring symbol centered on the mirror surface, representing a state-specific red circle manifestation, with no glow and no distortion; number 6 marks a toilet on the west wall upper-middle opposite the sink; number 7 marks a wall shower head and hose on the north wall right side; number 8 marks a circular floor drain near the north-center shower wet zone; number 9 marks a high frosted window or ventilation opening on the north wall left of center; number 10 marks a towel bar on the east wall south of the sink; number 11 marks a ceiling fluorescent fixture as a simple dashed rectangle at the center of the room. Strictly no: 3D, isometric, perspective, axonometric, depth, shadow, shading, gradients, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, material rendering."
      },
      "fp_kennel_aisle": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_kennel_aisle.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan of a modern indoor animal shelter kennel aisle. Use a clean CAD-style look with single-weight black outlines on a white or off-white background, geometric plan symbols only. Fill each zone with one flat solid pastel color: central kennel aisle pale beige, left cage bay pale blue-gray, right cage bay pale blue-gray, vaccination prep zone pale green, utility/wash corner pale cyan. Add short area labels only: Kennel Aisle, Cage Bay, Prep Zone. All furniture, openings, props, and devices must be marked by small white circles with black numbers 1 through 16, each number appearing exactly once; do not write object names inside the drawing. Layout: a long narrow rectangular room oriented north-south, front sliding entrance door on the south wall, rear service door on the north wall, high ventilation windows on both long walls. Place divided wire dog cage symbols in continuous rows along the west and east walls, each row drawn as a long rectangle split into kennel compartments with simple parallel line fronts facing the aisle. Keep the center as a clear circulation aisle with a linear floor drain along the middle. At the north end, draw a compact vaccination prep area with a simple examination table, rolling supply cart, small medicine refrigerator, utility sink with hose point, and waste bin/sharps container. Add a small wall CCTV camera symbol in the south-east corner. Use top-down convention: doors as line-and-arc or sliding door symbols, windows as double parallel wall openings, sink as a simple plan symbol, table/cart/fridge/bin as simple rectangles. Include a small north arrow in one corner. Use no decorative illustration, no tonal variation, no surface detail, no camera icons, and no field-of-view marks."
      },
      "fp_grooming_wash_station": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_grooming_wash_station.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram for a compact modern coastal animal shelter grooming and dog bathing station. Use a clean CAD or IKEA-style room layout sketch: single-weight black outlines, white or off-white background, simple geometric top-down symbols only. This must be a flat 2D plan view, not artwork. Strictly avoid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered looks, lighting effects, textured surfaces, or material rendering. Use only solid flat pastel fills with no gradients and no blending. North is up; place a small N arrow in one corner.\n\nDraw one rectangular utility room. Divide it into four color-coded zones with consistent flat fills: number 1 Wash Bay area in pale cyan occupying the north and northwest half; number 2 Dry Grooming area in pale yellow occupying the east and southeast half; number 3 Storage Utility area in pale green as a west-wall and southwest utility strip; number 4 Entry Aisle area in pale beige along the south central circulation path. Short area labels may appear inside these colored zones, but do not place any other words inside the drawing.\n\nInclude simple symbolic glyphs and place a small white circle with a black outline and black number exactly once for each numbered element. No text labels next to objects. Number 5 is an inward swinging entrance door on the southwest wall with a door arc. Number 6 is a high sliding window on the north wall above the wash bay, drawn as double parallel wall lines. Number 7 is an exhaust vent opening on the east wall near the northeast corner. Number 8 is a large rectangular dog bathing tub along the north wall, left of center, drawn as a top-down tub symbol with raised-edge outline. Number 9 is a small ramp or anti-slip step attached to the south side of the tub. Number 10 is a wall-mounted shower sprayer and coiled hose symbol above the tub. Number 11 is a small cluster of soap bottles or dispenser blocks on the right tub ledge. Number 12 is a circular floor drain in the center of the wash bay. Number 13 is a flat irregular light-blue soap suds or wet patch symbol on the floor near the tub and drain; keep it graphic and schematic, not realistic. Number 14 is a rectangular utility sink on the west wall. Number 15 is a compact wall-mounted water heater above the sink. Number 16 is a rectangular grooming table in the east half of the room. Number 17 is a small grooming arm and loop attached to the north edge of the grooming table. Number 18 is a pet dryer unit on the east wall just south of the vent. Number 19 is a bank of drying cages or kennels along the southeast east wall, drawn as a row of simple rectangles. Number 20 is a towel rack with hooks on the south wall to the right of the entrance. Number 21 is a storage shelf with small bottle blocks on the lower west wall. Number 22 is a rectangular non-slip floor mat south of the tub. Number 23 is a small trash bin in the southwest corner. Number 24 is a mop bucket and squeegee symbol along the south wall. Number 25 is two narrow overhead fluorescent strip light symbols centered along the room length, drawn as simple thin rectangles.\n\nKeep the layout practical and compact, like a modern Korean coastal shelter wet-room: drain close to bath, high window for ventilation, exhaust vent on the exterior wall, wall water heater near sink, storage near entrance, grooming table and drying cages kept in the drier side. The diagram must remain simple and readable, with numbered markers and area colors as the main communication tools."
      },
      "fp_sales_floor": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_sales_floor.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a compact modern coastal Korean neighborhood mart sales floor. The drawing must look like a clean architectural CAD plan or simple IKEA-style room layout sketch: white or off-white background, single-weight black outlines, geometric plan symbols only. Strictly avoid and do not depict 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, or material rendering. Use only flat pastel solid area fills with no blending: pale yellow for the Main Aisles area, pale beige for the Entrance area, pale peach for the Checkout area, pale green for the Produce area, pale cyan for the Refrigerated area, and pale lavender for the Household Goods area. Area labels may appear as short generic English words inside colored zones: Main Aisles, Entrance, Checkout, Produce, Refrigerated, Household Goods. No other words or annotations inside the drawing except a small north arrow with N in one corner and the numbered markers. Use a rectangular sales floor with north at the top and the street-facing front on the south wall. Show layout cues of a small modern Korean neighborhood mart: a glass sliding entrance centered slightly right on the south wall, storefront window band along the south wall, checkout immediately inside near the southeast/front right, baskets and carts near the entrance, fresh produce display islands near the southwest/front left, three narrow long parallel dry-goods shelf rows running north-south through the center, refrigerated drink and dairy cases along the north and east perimeter walls, household goods shelving along the rear west wall, a rear stockroom swing door on the northwest/back wall, a small freezer island near the east-center, and simple CCTV dome symbols at front and rear corners. Furniture and openings must be simple top-down symbols: shelf rows as long rectangles, produce tables as rectangles, checkout as an L-shaped counter, refrigerator cases as long wall rectangles, doors as swing arcs or sliding-door parallel lines, windows as double parallel wall lines. Do not draw people, products in detail, camera icons, view cones, arrows other than the north arrow, decorative graphics, occult symbols, or readable signage. Place each numbered marker as a small white circle with black outline and black number, each number unique and used exactly once, with no text label beside it: 1 at the center of the Main Aisles area; 2 in the Entrance vestibule; 3 in the Checkout zone; 4 in the Produce zone; 5 in the Refrigerated wall zone; 6 in the Household Goods zone; 7 on the front sliding glass entrance; 8 on the low entry gate opening just north of the vestibule; 9 on the storefront window band; 10 on the checkout counter; 11 on the POS register and small screen atop the counter; 12 on the shopping basket and cart stack; 13 on the western central shelf row; 14 on the middle central shelf row; 15 on the eastern central shelf row; 16 on the front endcap display stand; 17 on the front produce island table; 18 on the rear produce island table; 19 on the north refrigerated drink cases; 20 on the east dairy and frozen cases; 21 on the small freezer island; 22 on the west household goods shelf; 23 on the rear stockroom swing door; 24 on the front CCTV dome camera; 25 on the rear CCTV dome camera; 26 on the freestanding promotion stand near the front center aisle."
      },
      "fp_exterior_entrance_wall": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_exterior_entrance_wall.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a 1024x1024 square flat top-down schematic floor plan diagram, clean CAD-style line map on a white or off-white background. Use single-weight black outlines and simple geometric plan symbols only. Use uniform solid pastel fills: Sidewalk area in pale gray, Entry vestibule area in pale beige, Facade service strip area in pale blue-gray, Street edge area in pale muted green-gray. Show a modern coastal Korean city exterior entrance layout: an L-shaped exterior building wall forming a clear corner in the northeast portion, a compact sidewalk approach outside it, and a small recessed vestibule behind the entrance. Draw the automatic sliding glass entrance doors as offset parallel door leaves centered on the south-facing wall. Draw fixed glass side panels as double parallel line panels flanking the doors. Draw the exterior wall corner with clear wall thickness. Add a small CCTV camera box symbol mounted at the outside corner, a thin rectangular wall sign panel aligned with the entrance facade, a small door sensor strip at the sliding-door header, and a smartphone as a small flat rectangle on the sidewalk near the entrance. Include a small north arrow in one corner. Place small white circular markers with black numbers 1 through 11, each number exactly once, on all areas and items. Only large area labels may read Sidewalk, Vestibule, Facade Strip, and Street Edge; no other text inside the drawing. Keep all colors uniform and all shapes symbolic; no pictorial scene, no people, no vehicles, no decorative surface detail, no tonal effects, no simulated illumination."
      },
      "fp_security_office": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_security_office.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a compact modern Korean coastal-city security office. The drawing must look like a clean architectural CAD plan or simple IKEA-style room layout sketch: single-weight black outlines on a white/off-white background, simple geometric plan symbols only. Use flat pastel solid area fills with no blending: Main office area pale beige, CCTV playback zone along the north side pale blue-gray, equipment storage nook in the southeast corner pale green. Add short area labels only: \"Office\", \"CCTV\", and \"Storage\"; a small north arrow with \"N\" may appear in one corner. Do not add any other text inside the drawing except the numbered markers. Place small white circular markers with black outlines and black numbers, each number unique and appearing exactly once, for all listed elements. Layout: rectangular room with north at the top; west wall has an entrance door with a standard swing arc; east wall has a narrow sliding window shown as double parallel wall lines. North wall has a CCTV monitor bank above an L-shaped control desk, with an operator swivel chair facing the monitors. On the control desk show a playback computer monitor plus a keyboard/jog control panel as simple rectangles. Northeast corner has a DVR/network rack. Southwest/south wall has a secondary admin desk, admin chair, printer scanner, and filing cabinet. Center area has a small visitor table with a pair of visitor chairs. West wall has a notice board/site map rectangle. South wall near the storage nook has a wall-mounted air conditioner symbol. Southeast storage nook contains metal storage shelving. Use top-down furniture glyph conventions: desk rectangles, chair blocks, monitor rectangles, cabinet rectangles, door swing arc, window double-line symbol. Strictly avoid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered, lighting effects, textured surfaces, or material rendering."
      },
      "fp_office": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_office.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a modern Korean detective squad office connected to a corridor. The diagram must look like a clean architectural CAD plan or simple IKEA-style room layout sketch: single-weight black outlines on a white or off-white background, geometric symbols only. Use flat solid pastel area fills with one consistent color per zone: main detective office area in pale cool blue-gray and corridor in pale beige. Add only short area labels inside the colored zones: OFFICE and CORRIDOR. Add a small north arrow with the letter N in one corner. No other text inside the drawing except numbered circles and the allowed area labels.\n\nStrictly avoid any 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic, rendered look, lighting effects, textured surfaces, or material rendering. Use no gradients, no blending, no drop shadows, no decorative style.\n\nLayout: draw a rectangular main office occupying most of the canvas, with a horizontal corridor strip along the south edge. Put the main corridor door on the south wall slightly west of center, shown as a standard plan-view door line with a swing arc opening inward. Inside the office, place a duty officer desk close to the south-west entrance area with two visitor chairs opposite it. Place a central four-desk investigator island in the middle of the office, using simple rectangles for desks and small chair blocks. Each desk has a small flat monitor rectangle on top. Put a CCTV and duty monitor bank on the east wall near the south-east corner. Put a wall-mounted GPS map monitor on the north wall slightly east of center. Put a crime photo evidence board on the north-west wall. Put filing cabinets along the west wall north half and a printer copier station on the west wall south half. Add exterior window bands as double parallel lines on the north wall left of the GPS monitor and on the east wall north half. Add a small wall clock symbol near the south interior wall and two long rectangular ceiling fluorescent light panel symbols centered over the desk island, drawn as simple flat plan symbols only, not glowing.\n\nPlace small white circular markers with black outlines and black numbers, each number unique and appearing exactly once, centered on or next to the corresponding element. Numbered markers: 1 main detective office area, 2 corridor area, 3 main corridor door, 4 duty officer desk, 5 west-center investigator desk, 6 east-center investigator desk, 7 north-center investigator desk, 8 south-center investigator desk, 9 monitor on west-center desk, 10 monitor on east-center desk, 11 monitor on north-center desk, 12 monitor on south-center desk, 13 CCTV and duty monitor bank, 14 GPS map wall monitor, 15 crime photo evidence board, 16 filing cabinet row, 17 printer copier station, 18 north exterior window band, 19 east exterior window band, 20 visitor chairs near duty desk, 21 wall clock, 22 ceiling fluorescent light panels. Do not draw camera icons, view cones, character figures, annotations, arrows other than the north arrow, or labels for the numbered items."
      },
      "fp_exterior_entrance": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_exterior_entrance.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a 1024x1024 square flat top-down schematic floor plan diagram of a modern coastal city police station exterior entrance, curbside road, and bicycle parking area. The diagram must look like a clean architectural CAD plan or IKEA-style layout sketch: simple geometric symbols, single-weight black outlines, white or off-white background, no decorative art. Use flat pastel solid area fills with one consistent color per zone: Station building area pale blue-gray, Entrance forecourt area pale beige, Curbside road area pale gray, Bicycle parking area pale green. No gradients, no blending, no drop shadows. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealistic view, no rendered look, no lighting effects, no textured surfaces, no material rendering. Layout: north at top. Put a rectangular station building footprint across the north half of the plan, with the south facade facing the street. Place a centered main entrance on the south wall, shown with simple top-down double door leaves and swing arcs. Put front window bands as double parallel line symbols on both sides of the entrance. Add a shallow rectangular entry canopy symbol projecting over the forecourt. In front of the entrance, show a compact urban entrance forecourt with steps, an accessibility ramp to the west, and a row of short bollard symbols near the curb. At the bottom of the plan, draw an east-west curbside road band separated from the forecourt by a clear curb line. On the east side of the forecourt, draw a bicycle parking bay with a simple rack glyph and one top-down bicycle glyph angled toward the road, suitable for a departure scene. Add a blank rectangular signboard near the entrance and a small CCTV device symbol above the entrance; the signboard must contain no readable text. Use only short area labels inside the colored areas: Station, Forecourt, Road, Bike Parking. A small north arrow with N is allowed in one corner. Do not draw any camera icon, field-of-view cone, people, vehicles other than the bicycle, or extra annotations. Place small white circular numbered markers with black outlines and black numbers, each number appearing exactly once: 1 station building area, 2 entrance forecourt area, 3 curbside road area, 4 bicycle parking area, 5 main entrance double doors, 6 west front window band, 7 east front window band, 8 entry canopy, 9 blank police station signboard, 10 front steps, 11 accessibility ramp, 12 bicycle rack, 13 bicycle for departure, 14 short bollard row, 15 curb and road edge, 16 CCTV device."
      },
      "fp_boat_exterior": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_boat_exterior.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram, like a clean architectural CAD plan or simple IKEA-style layout sketch, showing the exterior deck of a small modern Korean west-coast fishing boat surrounded by sea. The boat hull is an elongated rounded rectangle centered vertically, bow at the north/top and stern at the south/bottom, with a small north arrow in one corner. Use single-weight black outlines on a white/off-white background, geometric plan symbols only. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealistic look, no rendered look, no lighting effects, no textured surfaces, no material rendering. Fill each zone with one flat pastel solid color only: surrounding sea pale blue, aft working deck pale sand, bow foredeck pale yellow, wheelhouse pale green, port and starboard side walkways pale beige, fog wall direction band pale gray. Draw the wheelhouse as a rectangular enclosed cabin in the forward-middle of the boat, with a simple door swing symbol on the aft wall for the wheelhouse entry, double-line window symbols on the front/north wall and both side walls, and a roof antenna/radar mast symbol centered on the wheelhouse roof. Draw the large open aft working deck behind the wheelhouse, narrow side walkways running along both sides of the wheelhouse, and a smaller bow foredeck ahead of it. Include simple top-down glyphs for perimeter railings, a stern transom gate, a net drum and winch on the aft port side, stacked fish crates on the aft starboard side, a coiled rope on the aft deck, an anchor hatch and bow gear at the bow, a deck hatch on the aft deck, and a stern-facing work light on the aft edge of the wheelhouse. Indicate the fog wall direction only as a flat pale gray band outside the starboard/east and northeast sea edge, not as atmospheric rendering. Place small white circles with black outlines and black numbers 1 through 20 exactly once each, marking every listed area, opening, prop, and plot device. Area labels may appear as short generic English words inside colored areas, such as SEA, WORK DECK, BOW, WHEELHOUSE, WALKWAY, but do not place any object text labels, annotations, camera icons, field-of-view cones, arrows other than the north arrow, or extra writing inside the drawing."
      },
      "fp_wheelhouse_interior": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/298d86d9-615b-4b87-8040-21144c0731c1/episodes/b6544514-babb-4781-95a2-6a0ff1da342f/images/floor_plan/fp_wheelhouse_interior.png",
        "attempts": 1,
        "ref_used": "ref",
        "error": "",
        "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a compact modern coastal boat wheelhouse interior connected to an aft exterior deck entrance. The image must look like a clean architectural CAD plan or simple IKEA-style room layout sketch: single-weight black outlines, white or off-white background, geometric plan symbols only. Use flat solid pastel area fills with one consistent color per zone: Wheelhouse in pale blue, Exterior Deck in pale gray. Area labels may appear as short generic English words inside the zones: \"Wheelhouse\" and \"Deck\" only. Add a small north arrow with \"N\" in one corner. Do not add any other text inside the drawing except numbered markers.\n\nShow the wheelhouse as a small rectangular enclosed cabin occupying most of the plan, with a narrow exterior deck strip directly behind it at the south edge. Include modern small coastal vessel layout cues: an aft sliding deck door centered on the south wall, a threshold to the open deck, forward wraparound windows across the north wall and corners, sliding side windows on port and starboard walls, a forward helm console with a wheel, throttle, GPS/chart display, radio stack, and a small monitor screen, a captain chair behind the helm, a narrow bench seat along the port side, a small chart shelf or work table along the starboard side, a storage cabinet near the aft door, a life jacket rack near the aft entrance, a simple ceiling fluorescent light symbol, and a small wall-mounted heater or fan unit. Add flat crimson red circular ring marks on the inside face of the forward glass/wall area as a plot-critical visual device; keep them schematic and flat.\n\nEvery persistent element must be identified by a small white circle with a black outline and a black number, each number unique and appearing exactly once: 1 Wheelhouse area, 2 Exterior Deck area, 3 aft deck threshold, 4 aft sliding deck door, 5 front wraparound windows, 6 port side sliding window, 7 helm console with wheel, 8 captain chair, 9 GPS chart display and radio stack, 10 CCTV or monitor screen, 11 narrow bench seat, 12 red circular marks on glass, 13 small chart shelf or work table, 14 storage cabinet, 15 life jacket rack, 16 wall-mounted fluorescent light, 17 small heater or fan unit, 18 starboard side sliding window. Use simple top-down furniture and opening glyphs: door track and opening line for the sliding door, double parallel lines for windows, rectangles for console, chair, bench, cabinet, shelf, and small device boxes.\n\nStrictly avoid 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, material rendering, decorative illustration, people, camera icons, field-of-view cones, arrows other than the north arrow, and any non-English text."
      }
    }
  },
  "step_id": "floor_plan_render",
  "run_id": "163471b5-b112-4a98-8080-48263aea057c",
  "resolved_model": "gpt",
  "updated_at": "2026-05-05T11:30:39.542532+00:00",
  "project_config_snapshot": {}
}