{
  "status": "completed",
  "applicable_count": 3,
  "completed_count": 3,
  "failed_count": 0,
  "schema_version": 3,
  "config_hash": "787c440f826114ed",
  "data": {
    "groups": {
      "L10B01": {
        "status": "ok",
        "is_reuse": false,
        "render_action": "render_new_plate",
        "location_id": "L10",
        "location_name": "",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B01.png",
        "t2i_prompt": "미국 펜실베이니아 산림·산악권의 바위 절벽에 통합된 은폐 지하 시설 입구를 해 질 무렵 외부 접근로에서 바라본 장면. 실제 미러리스 또는 DSLR 카메라와 35mm급 광각 렌즈로 촬영한 다큐멘터리 풍 사진이며, 카메라는 지면에서 약 1.6m 높이의 서 있는 사람 눈높이에 둔다. 자연 암반의 한가운데에서 완전히 열린 위장 바위문과 인공적으로 보강된 문턱을 정면에 가깝게 보여 주되, 지하 접촉실은 문턱 너머의 가까운 가장자리만 제한적으로 드러낸다. 열린 문짝의 바깥 표면은 주변 암벽과 이어지는 불규칙한 실제 암석 질감이며, 절단된 가장자리와 내부에는 오래 사용된 기계식 개폐 구조, 산화된 금속 보강재, 마모된 콘크리트와 낡은 밀폐 구조가 노출된다. 수세기 동안 습기와 자연 침식이 누적된 암반, 이끼, 흙 얼룩, 빗물 자국과 금속 부식이 보이고, 21세기 문명의 잔존 기술과 25세기 초 은폐 시설의 실용적 보강 요소가 과장 없이 물리적으로 결합되어 있다. 문턱 안쪽의 어두운 방어 위치에서 장총 한 자루가 외부 접근로를 향해 조준된 상태로 뻗어 있으며, 이를 든 사람의 신체나 얼굴은 전혀 보이지 않는다. 황혼의 차갑고 약한 자연광이 외부 암벽과 접근로를 비추고, 지하실 안쪽의 절제된 저조도 설비광이 보강 문턱의 금속과 콘크리트 표면에 희미하게 닿는다. 자연 암석과 인공 경계가 명확히 구분되고, 내부 깊이는 과도하게 노출하지 않는다. 실제 콘크리트의 거친 입자, 금속 녹과 긁힘, 암석의 습윤한 표면, 흙과 식생의 불규칙성을 사실적으로 기록하며, 일상적인 마모와 오염이 남아 있는 실제 장소 참고 사진처럼 표현한다. 자연스러운 심도, 사실적인 노출, 절제되고 채도가 낮은 현장 색감, 인위적인 후처리 없이 촬영한 담담한 기록 사진. 사람, 얼굴, 신체 형태의 인물은 묘사하지 않으며, 평면도·탑다운 시점·건축 도해가 아닌 실제 지상 시점의 장소 사진. 16:9 가로 비율, 실제 카메라 촬영본",
        "shot_guides": [
          {
            "shot_id": "S7_Shot4",
            "guide_text": "외부 접근로의 서 있는 사람 눈높이에서 35mm급 광각으로 열린 바위문을 중심에 둔다. 자연 암벽 속에 드러난 인공 경계 전체와 보강 문턱을 명확히 보여 주면서 지하실은 입구 바로 안쪽 가장자리까지만 노출한다. 문턱 안쪽 어둠에서 외부를 향해 조준된 장총이 식별되게 하되, 이를 든 사람의 얼굴이나 신체는 프레임에 나타내지 않는다. 황혼의 차가운 자연광과 내부의 약한 설비광 사이의 현실적인 밝기 차이를 유지한다."
          }
        ],
        "shot_ids": [
          "S7_Shot4"
        ],
        "scenes": [],
        "parent_id": "",
        "ref_used": "fp_only",
        "render_attempts": 1,
        "render_error": "",
        "variant_label": "",
        "floor_plan_used": true,
        "camera_recommendations": {
          "camera_position": "on number 1 (exterior approach), facing through number 3 (concealed rock door) toward number 4 (threshold) and number 5 (contact room), with number 8 aiming outward",
          "camera_height": "eye-level standing ~1.6m",
          "lens_hint": "35mm wide angle",
          "framing_notes": "Show the opened artificial boundary within the natural rock face, keep the armed defender visible inside the threshold, and reveal only the near edge of the underground room."
        },
        "reference_decision": {
          "bg_id": "L10B01",
          "fp_id": "fp_l10_rock_entrance",
          "node_index": 0,
          "mode": "fp_seeded_anchor",
          "is_dwelling_identity_anchor": true,
          "rationale": "L10B01 is the sole supplied clean-anchor candidate and establishes dwelling identity directly from the floor plan. For S7_Shot4, camera unit 1 at [4,1] looks toward unit 2 and opening marker 3 at [4,4] with a wide 90-degree view, providing broad coverage of target units 1, 2, 4, and 5 while carrying transient marker 8.",
          "reference_paths": [
            "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/floor_plan/fp_l10_rock_entrance.png"
          ],
          "source_bg_ids": [],
          "fp_included": true,
          "reference_decision": {
            "selected_refs": [],
            "rejected_refs": [],
            "same_physical_space_dedup_decision": "no_reference_anchor",
            "why_single_ref_or_two_refs": "No reference is used because this first node is the required floor-plan-seeded dwelling identity anchor.",
            "physical_space_id_per_ref": [],
            "same_physical_space_low_delta_candidate": false,
            "low_delta_reuse_target_bg_id": "",
            "low_delta_rationale": ""
          },
          "camera_decision": {
            "camera_unit": 1,
            "camera_cell": [
              4,
              1
            ],
            "look_at_unit": 2,
            "look_at_cell": [
              4,
              4
            ],
            "lens_enum": "wide",
            "fov_deg": 90,
            "framing_notes": "Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage."
          },
          "render_guidance": {
            "visible_space_directive": "From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.",
            "camera_framing_directive": "Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.",
            "subject_position_directive": "Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.",
            "state_cue_directive": "Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.",
            "negative_continuity_directive": "Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements."
          },
          "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nUse the supplied base floor plan as the only visual reference. Render a fresh photoreal interior under the modest style contract. The base plan's numbered markers, labels, arrows and diagram graphics are planning aids ONLY — the rendered photograph must contain NONE of them: no numerals, no letters, no circles or arrows, no diagram lines of any kind anywhere in the image. Treat the markers purely as invisible spatial guidance.\n\nREFERENCE PLAN: mode='fp_seeded_anchor'\n  - reference: base floor plan (anchor)\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 1\n  - camera_cell: [4, 1]\n  - look_at_unit: 2\n  - look_at_cell: [4, 4]\n  - lens_enum: 'wide'\n  - fov_deg: 90\n  - framing_notes: 'Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.\n  - camera_framing_directive: Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.\n  - subject_position_directive: Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.\n  - state_cue_directive: Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.\n  - negative_continuity_directive: Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements.\n\n",
          "diagnostics": []
        },
        "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nUse the supplied base floor plan as the only visual reference. Render a fresh photoreal interior under the modest style contract. The base plan's numbered markers, labels, arrows and diagram graphics are planning aids ONLY — the rendered photograph must contain NONE of them: no numerals, no letters, no circles or arrows, no diagram lines of any kind anywhere in the image. Treat the markers purely as invisible spatial guidance.\n\nREFERENCE PLAN: mode='fp_seeded_anchor'\n  - reference: base floor plan (anchor)\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 1\n  - camera_cell: [4, 1]\n  - look_at_unit: 2\n  - look_at_cell: [4, 4]\n  - lens_enum: 'wide'\n  - fov_deg: 90\n  - framing_notes: 'Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.\n  - camera_framing_directive: Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.\n  - subject_position_directive: Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.\n  - state_cue_directive: Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.\n  - negative_continuity_directive: Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements.\n\n",
        "effective_render_prompt": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nUse the supplied base floor plan as the only visual reference. Render a fresh photoreal interior under the modest style contract. The base plan's numbered markers, labels, arrows and diagram graphics are planning aids ONLY — the rendered photograph must contain NONE of them: no numerals, no letters, no circles or arrows, no diagram lines of any kind anywhere in the image. Treat the markers purely as invisible spatial guidance.\n\nREFERENCE PLAN: mode='fp_seeded_anchor'\n  - reference: base floor plan (anchor)\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 1\n  - camera_cell: [4, 1]\n  - look_at_unit: 2\n  - look_at_cell: [4, 4]\n  - lens_enum: 'wide'\n  - fov_deg: 90\n  - framing_notes: 'Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.\n  - camera_framing_directive: Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.\n  - subject_position_directive: Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.\n  - state_cue_directive: Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.\n  - negative_continuity_directive: Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements.\n\n미국 펜실베이니아 산림·산악권의 바위 절벽에 통합된 은폐 지하 시설 입구를 해 질 무렵 외부 접근로에서 바라본 장면. 실제 미러리스 또는 DSLR 카메라와 35mm급 광각 렌즈로 촬영한 다큐멘터리 풍 사진이며, 카메라는 지면에서 약 1.6m 높이의 서 있는 사람 눈높이에 둔다. 자연 암반의 한가운데에서 완전히 열린 위장 바위문과 인공적으로 보강된 문턱을 정면에 가깝게 보여 주되, 지하 접촉실은 문턱 너머의 가까운 가장자리만 제한적으로 드러낸다. 열린 문짝의 바깥 표면은 주변 암벽과 이어지는 불규칙한 실제 암석 질감이며, 절단된 가장자리와 내부에는 오래 사용된 기계식 개폐 구조, 산화된 금속 보강재, 마모된 콘크리트와 낡은 밀폐 구조가 노출된다. 수세기 동안 습기와 자연 침식이 누적된 암반, 이끼, 흙 얼룩, 빗물 자국과 금속 부식이 보이고, 21세기 문명의 잔존 기술과 25세기 초 은폐 시설의 실용적 보강 요소가 과장 없이 물리적으로 결합되어 있다. 문턱 안쪽의 어두운 방어 위치에서 장총 한 자루가 외부 접근로를 향해 조준된 상태로 뻗어 있으며, 이를 든 사람의 신체나 얼굴은 전혀 보이지 않는다. 황혼의 차갑고 약한 자연광이 외부 암벽과 접근로를 비추고, 지하실 안쪽의 절제된 저조도 설비광이 보강 문턱의 금속과 콘크리트 표면에 희미하게 닿는다. 자연 암석과 인공 경계가 명확히 구분되고, 내부 깊이는 과도하게 노출하지 않는다. 실제 콘크리트의 거친 입자, 금속 녹과 긁힘, 암석의 습윤한 표면, 흙과 식생의 불규칙성을 사실적으로 기록하며, 일상적인 마모와 오염이 남아 있는 실제 장소 참고 사진처럼 표현한다. 자연스러운 심도, 사실적인 노출, 절제되고 채도가 낮은 현장 색감, 인위적인 후처리 없이 촬영한 담담한 기록 사진. 사람, 얼굴, 신체 형태의 인물은 묘사하지 않으며, 평면도·탑다운 시점·건축 도해가 아닌 실제 지상 시점의 장소 사진. 16:9 가로 비율, 실제 카메라 촬영본",
        "camera_decision": {
          "camera_unit": 1,
          "camera_cell": [
            4,
            1
          ],
          "look_at_unit": 2,
          "look_at_cell": [
            4,
            4
          ],
          "lens_enum": "wide",
          "fov_deg": 90,
          "framing_notes": "Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage."
        },
        "shot_aware_plan_node_index": 0,
        "shot_aware_plan_mode": "fp_seeded_anchor",
        "render_guidance": {
          "visible_space_directive": "From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.",
          "camera_framing_directive": "Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.",
          "subject_position_directive": "Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.",
          "state_cue_directive": "Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.",
          "negative_continuity_directive": "Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements."
        },
        "attached_reference_lineage": {
          "fp_id": "fp_l10_rock_entrance",
          "prior_bg_ids": [],
          "attached_ref_labels": [
            "fp:fp_l10_rock_entrance"
          ],
          "ref_used": "fp_only",
          "db_write_policy": "checkpoint_only"
        }
      },
      "L10B02": {
        "status": "ok",
        "is_reuse": false,
        "render_action": "render_new_plate",
        "location_id": "L10",
        "location_name": "",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B02.png",
        "t2i_prompt": "미국 펜실베이니아 산림·산악 지대의 자연 지형 속에 은폐된 2419년의 지하 접촉소 내부. 입구 가까운 접촉실에서 서 있는 사람의 눈높이 약 1.6m에 카메라를 두고 위쪽으로 기울여, 방 중앙 상부의 활성 천장 지도판을 주 피사체로 담는다. 측면 벽의 원형 통신판도 프레임 가장자리에 분명히 보이게 한다. 천장 지도판에는 전방 산악 지형을 나타내는 정밀한 지도 인터페이스가 판면 안에 표시되어 있고, 산맥 전역에 조밀한 붉은색 포위 지점들이 다수 겹쳐 나타난다. 붉은 표식은 공중에 떠 있지 않고 오직 활성 지도 화면 내부의 평면 정보로 존재한다. 원형 통신판의 활성 표면에는 미승인 권한 경고가 절제된 추상 기호와 상태 표시로 나타나며, 역시 판면 밖으로 투사되지 않는다. 먼 미래의 은폐 시설답게 자연 암반과 연결된 견고한 구조, 무광 금속, 짙은 복합재, 정밀하게 맞물린 패널 이음새를 사용하되, 실제 운용 흔적과 미세한 긁힘, 손때, 산화 자국, 먼지, 습기 얼룩이 축적되어 있다. 수세기 전 기술의 잔존 부품과 현재 작동하는 감시·통신 장치의 재질 차이가 현실적으로 구분되며, 장식적인 우주선 내부가 아니라 산악 생존 시설의 실용적인 기계 공간처럼 보인다. 지도판과 통신판의 낮은 적색·백색 표시광, 제한된 천장 설비광, 입구 쪽에서 스며드는 약한 자연광이 섞인 낮음에서 중간 정도의 명암이며, 과장된 광선이나 홀로그램은 없다. 사람, 얼굴, 인체 형상은 전혀 없다. 풀프레임 DSLR 또는 미러리스 카메라와 28mm 광각 렌즈로 촬영한 실제 카메라 다큐멘터리 풍 사진, 서 있는 사람의 자연스러운 시야, 사실적인 원근과 자연스러운 심도, 실제 콘크리트·암석·금속의 질감과 일상적인 마모, 후처리 없는 현장 기록 사진. 탑다운 시점, 평면도, 건축 도면, 삽화, CGI, 건축 시각화가 아닌 실제 장소 사진. 16:9 가로 비율, 실제 카메라 촬영본",
        "shot_guides": [
          {
            "shot_id": "S7_Shot15",
            "guide_text": "접촉실 입구 가까운 내부에서 눈높이 약 1.6m로 서서 28mm 광각 렌즈를 위로 기울인 구도. 활성 천장 지도판이 화면의 중심과 상부를 지배하게 하고, 전방 산맥 전역의 조밀한 붉은 포위 지점이 판면 안에서 명확히 읽히게 한다. 측면 벽의 원형 통신판도 잘리지 않게 남겨 그 활성 표면의 미승인 권한 경고를 확인할 수 있도록 한다. 인물 없이 실제 지하 시설을 기록한 담담한 현장 사진처럼 촬영한다."
          }
        ],
        "shot_ids": [
          "S7_Shot15"
        ],
        "scenes": [],
        "parent_id": "",
        "ref_used": "refs_1",
        "render_attempts": 1,
        "render_error": "",
        "variant_label": "",
        "floor_plan_used": false,
        "camera_recommendations": {
          "camera_position": "inside number 5 (contact room), near number 4 (threshold), facing upward toward number 7 (ceiling map panel) while retaining number 6 (communication panel) at the side",
          "camera_height": "eye-level standing ~1.6m, tilted upward",
          "lens_hint": "28mm wide angle",
          "framing_notes": "Make number 7 dominant overhead with number 9 distributed densely across its bounded display surface; keep number 10 confined to number 6 and avoid floating interface graphics."
        },
        "reference_decision": {
          "bg_id": "L10B02",
          "fp_id": "fp_l10_rock_entrance",
          "node_index": 1,
          "mode": "same_physical_space_view",
          "is_dwelling_identity_anchor": false,
          "rationale": "S7_Shot15 remains in the same physical-space system established by L10B01 but requires a distinct upward insert centered on fixed marker 7 and transient markers 9 and 10. Camera unit 5 at [3,7] looking within unit 5 toward [6,7] is structurally different from the anchor framing, so a new same-space plate is required.",
          "reference_paths": [
            "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B01.png"
          ],
          "source_bg_ids": [
            "L10B01"
          ],
          "fp_included": false,
          "reference_decision": {
            "selected_refs": [
              {
                "ref_bg_id": "L10B01",
                "physical_space_id": "fp_l10_rock_entrance_space_1",
                "space_description": "The connected physical-space system containing units 1, 2, 4, and 5 and opening marker 3."
              }
            ],
            "rejected_refs": [],
            "same_physical_space_dedup_decision": "single_reference_same_physical_space",
            "why_single_ref_or_two_refs": "A single reference is sufficient because S7_Shot15 isolates unit 5 within the same connected physical space and does not require two distinct co-visible spaces.",
            "physical_space_id_per_ref": [
              "fp_l10_rock_entrance_space_1"
            ],
            "same_physical_space_low_delta_candidate": false,
            "low_delta_reuse_target_bg_id": "",
            "low_delta_rationale": ""
          },
          "camera_decision": {
            "camera_unit": 5,
            "camera_cell": [
              3,
              7
            ],
            "look_at_unit": 5,
            "look_at_cell": [
              6,
              7
            ],
            "lens_enum": "telephoto",
            "fov_deg": 25,
            "framing_notes": "Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context."
          },
          "render_guidance": {
            "visible_space_directive": "Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.",
            "camera_framing_directive": "Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.",
            "subject_position_directive": "S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.",
            "state_cue_directive": "Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.",
            "negative_continuity_directive": "Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements."
          },
          "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B01' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 5\n  - camera_cell: [3, 7]\n  - look_at_unit: 5\n  - look_at_cell: [6, 7]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.\n  - camera_framing_directive: Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.\n  - subject_position_directive: S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.\n  - state_cue_directive: Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.\n  - negative_continuity_directive: Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements.\n\n",
          "diagnostics": []
        },
        "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B01' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 5\n  - camera_cell: [3, 7]\n  - look_at_unit: 5\n  - look_at_cell: [6, 7]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.\n  - camera_framing_directive: Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.\n  - subject_position_directive: S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.\n  - state_cue_directive: Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.\n  - negative_continuity_directive: Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements.\n\n",
        "effective_render_prompt": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B01' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 5\n  - camera_cell: [3, 7]\n  - look_at_unit: 5\n  - look_at_cell: [6, 7]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.\n  - camera_framing_directive: Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.\n  - subject_position_directive: S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.\n  - state_cue_directive: Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.\n  - negative_continuity_directive: Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements.\n\n미국 펜실베이니아 산림·산악 지대의 자연 지형 속에 은폐된 2419년의 지하 접촉소 내부. 입구 가까운 접촉실에서 서 있는 사람의 눈높이 약 1.6m에 카메라를 두고 위쪽으로 기울여, 방 중앙 상부의 활성 천장 지도판을 주 피사체로 담는다. 측면 벽의 원형 통신판도 프레임 가장자리에 분명히 보이게 한다. 천장 지도판에는 전방 산악 지형을 나타내는 정밀한 지도 인터페이스가 판면 안에 표시되어 있고, 산맥 전역에 조밀한 붉은색 포위 지점들이 다수 겹쳐 나타난다. 붉은 표식은 공중에 떠 있지 않고 오직 활성 지도 화면 내부의 평면 정보로 존재한다. 원형 통신판의 활성 표면에는 미승인 권한 경고가 절제된 추상 기호와 상태 표시로 나타나며, 역시 판면 밖으로 투사되지 않는다. 먼 미래의 은폐 시설답게 자연 암반과 연결된 견고한 구조, 무광 금속, 짙은 복합재, 정밀하게 맞물린 패널 이음새를 사용하되, 실제 운용 흔적과 미세한 긁힘, 손때, 산화 자국, 먼지, 습기 얼룩이 축적되어 있다. 수세기 전 기술의 잔존 부품과 현재 작동하는 감시·통신 장치의 재질 차이가 현실적으로 구분되며, 장식적인 우주선 내부가 아니라 산악 생존 시설의 실용적인 기계 공간처럼 보인다. 지도판과 통신판의 낮은 적색·백색 표시광, 제한된 천장 설비광, 입구 쪽에서 스며드는 약한 자연광이 섞인 낮음에서 중간 정도의 명암이며, 과장된 광선이나 홀로그램은 없다. 사람, 얼굴, 인체 형상은 전혀 없다. 풀프레임 DSLR 또는 미러리스 카메라와 28mm 광각 렌즈로 촬영한 실제 카메라 다큐멘터리 풍 사진, 서 있는 사람의 자연스러운 시야, 사실적인 원근과 자연스러운 심도, 실제 콘크리트·암석·금속의 질감과 일상적인 마모, 후처리 없는 현장 기록 사진. 탑다운 시점, 평면도, 건축 도면, 삽화, CGI, 건축 시각화가 아닌 실제 장소 사진. 16:9 가로 비율, 실제 카메라 촬영본",
        "camera_decision": {
          "camera_unit": 5,
          "camera_cell": [
            3,
            7
          ],
          "look_at_unit": 5,
          "look_at_cell": [
            6,
            7
          ],
          "lens_enum": "telephoto",
          "fov_deg": 25,
          "framing_notes": "Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context."
        },
        "shot_aware_plan_node_index": 1,
        "shot_aware_plan_mode": "same_physical_space_view",
        "render_guidance": {
          "visible_space_directive": "Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.",
          "camera_framing_directive": "Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.",
          "subject_position_directive": "S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.",
          "state_cue_directive": "Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.",
          "negative_continuity_directive": "Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements."
        },
        "attached_reference_lineage": {
          "fp_id": "fp_l10_rock_entrance",
          "prior_bg_ids": [
            "L10B01"
          ],
          "attached_ref_labels": [
            "bg:L10B01"
          ],
          "ref_used": "refs_1",
          "db_write_policy": "checkpoint_only"
        }
      },
      "L10B03": {
        "status": "ok",
        "is_reuse": false,
        "render_action": "render_new_plate",
        "location_id": "L10",
        "location_name": "",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B03.png",
        "t2i_prompt": "미국 북동부 산림·산악권의 자연 암반 안쪽에 숨겨진 25세기 초반 지하 접촉소 입구를 실제 카메라로 촬영한 다큐멘터리 풍 사진. 강화된 문턱 구역 바로 안쪽에서 접촉실의 드러난 가장자리를 바라본다. 거칠고 습기 어린 암벽과 오래 마모된 금속 보강재, 산화 흔적이 남은 배선 덮개, 수세기 동안 수리하며 사용한 구형 설비가 축적된 현실적인 공간이다. 접촉실 측면 벽에는 원형 통신판이 고정되어 있고, 그 활성 판면 안에만 승인되지 않은 권한 주체를 감지한 경고가 절제된 기호와 상태 표시로 나타난다. 천장 중앙의 지도판도 활성화되어 있으며, 산악 지형을 에워싸는 여러 붉은 지점이 판면 내부의 지도 정보로만 표시되고 허공에는 어떤 그래픽도 떠 있지 않는다.\n\n화면 아래쪽 가까운 전경에는 화면 밖 방문객의 장비에 매달린 투명한 방수 주머니가 보인다. 긁힘과 접힘이 있는 방수 소재 안에 익숙한 구시대형 스마트폰이 들어 있으며, 전화기의 진동 때문에 주머니 표면과 결속부에 아주 미세한 흔들림만 포착된다. 인물이나 손, 얼굴, 신체 형상은 전혀 보이지 않으며, 거의 정지한 주변과 작은 진동의 대비로 억제된 긴장감을 전달한다. 원형 통신판의 권한 경고는 선명하게 읽히는 두 번째 초점이고, 천장 지도판의 붉은 포위 지점은 상단 배경의 연속성 요소로 남긴다.\n\n서 있는 사람의 눈높이 약 1.6미터에서 실제 디지털 일안 반사식 또는 미러리스 카메라와 풀프레임 환산 50밀리미터 표준 렌즈로 촬영한다. 낮고 실용적인 설비 조명과 판면에서 새어 나오는 제한된 빛, 절제된 저채도 색감, 과장되지 않은 중저명암 대비를 사용한다. 실제 암석의 수분 얼룩, 콘크리트의 균열, 금속의 산화와 손때, 방수 소재의 주름과 투명도, 스마트폰 유리의 반사를 정확히 표현한다. 자연스러운 피사계 심도와 현실적인 노출을 유지하며, 깨끗한 상품 사진이나 컴퓨터 그래픽, 삽화, 건축 시각화가 아닌 실제 장소 기록 사진처럼 보이게 한다. 후처리 효과 없이 사실적으로 촬영하며, 평면도나 위에서 내려다본 구도는 금지한다. 16:9 가로 비율, 실제 카메라 촬영본",
        "shot_guides": [
          {
            "shot_id": "S7_Shot20",
            "guide_text": "강화된 문턱 바로 안쪽의 서 있는 눈높이에서 접촉실을 향해 촬영한다. 투명 방수 주머니 속 구시대형 스마트폰의 미세한 진동을 가장 가까운 전경의 핵심으로 두되, 사람의 손이나 얼굴, 신체는 화면에 넣지 않는다. 측면 원형 통신판의 승인되지 않은 권한 주체 경고가 분명히 보이도록 하고, 산악 지형을 에워싼 붉은 지점이 표시된 천장 지도판은 프레임 상단의 두 번째 연속성 정보로 유지한다. 50밀리미터 표준 렌즈의 자연스러운 원근감과 얕지 않은 현실적 피사계 심도를 사용한다."
          }
        ],
        "shot_ids": [
          "S7_Shot20"
        ],
        "scenes": [],
        "parent_id": "",
        "ref_used": "refs_2",
        "render_attempts": 1,
        "render_error": "",
        "variant_label": "",
        "floor_plan_used": false,
        "camera_recommendations": {
          "camera_position": "inside number 5 (contact room), just beyond number 4 (threshold), facing the visitor carrying number 11 with number 6 (communication panel) behind and number 7 (ceiling map panel) near the upper frame",
          "camera_height": "eye-level standing ~1.6m",
          "lens_hint": "50mm normal lens",
          "framing_notes": "Prioritize the waterproof pouch and restrained reaction, retain the authority alert on the wall panel, and allow the active ceiling map to remain a secondary continuity element."
        },
        "reference_decision": {
          "bg_id": "L10B03",
          "fp_id": "fp_l10_rock_entrance",
          "node_index": 2,
          "mode": "same_physical_space_view",
          "is_dwelling_identity_anchor": false,
          "rationale": "S7_Shot20 uses the same physical space and fixed unit-5 elements represented by L10B02, but camera unit 4 at [4,6] looks toward marker 6 at [3,8] for a close subject-oriented slice spanning units 4 and 5. This geometry differs from L10B02's unit-5 upward view and reveals a different fixed fixture region, requiring a new plate rather than low-delta reuse.",
          "reference_paths": [
            "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B02.png"
          ],
          "source_bg_ids": [
            "L10B02"
          ],
          "fp_included": false,
          "reference_decision": {
            "selected_refs": [
              {
                "ref_bg_id": "L10B02",
                "physical_space_id": "fp_l10_rock_entrance_space_1",
                "space_description": "The connected unit-4/unit-5 interior portion with fixed markers 6 and 7."
              }
            ],
            "rejected_refs": [
              {
                "ref_bg_id": "L10B01",
                "reason": "L10B02 is the more direct earlier representative for continuity of unit 5 and fixed markers 6 and 7 in the state-facing interior shots."
              }
            ],
            "same_physical_space_dedup_decision": "single_reference_same_physical_space",
            "why_single_ref_or_two_refs": "A single reference is sufficient because S7_Shot20 frames one connected physical space across units 4 and 5; no two distinct co-visible spaces are committed.",
            "physical_space_id_per_ref": [
              "fp_l10_rock_entrance_space_1"
            ],
            "same_physical_space_low_delta_candidate": false,
            "low_delta_reuse_target_bg_id": "",
            "low_delta_rationale": ""
          },
          "camera_decision": {
            "camera_unit": 4,
            "camera_cell": [
              4,
              6
            ],
            "look_at_unit": 5,
            "look_at_cell": [
              3,
              8
            ],
            "lens_enum": "telephoto",
            "fov_deg": 25,
            "framing_notes": "Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue."
          },
          "render_guidance": {
            "visible_space_directive": "From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.",
            "camera_framing_directive": "Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.",
            "subject_position_directive": "Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.",
            "state_cue_directive": "Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.",
            "negative_continuity_directive": "Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements."
          },
          "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B02' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 4\n  - camera_cell: [4, 6]\n  - look_at_unit: 5\n  - look_at_cell: [3, 8]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.\n  - camera_framing_directive: Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.\n  - subject_position_directive: Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.\n  - state_cue_directive: Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.\n  - negative_continuity_directive: Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements.\n\n",
          "diagnostics": []
        },
        "reference_guidance_prefix": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B02' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 4\n  - camera_cell: [4, 6]\n  - look_at_unit: 5\n  - look_at_cell: [3, 8]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.\n  - camera_framing_directive: Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.\n  - subject_position_directive: Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.\n  - state_cue_directive: Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.\n  - negative_continuity_directive: Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements.\n\n",
        "effective_render_prompt": "STYLE CONTRACT — an ordinary, modest, real place, exactly as the supplied plan, reference images and prose establish it. Treat the result as an actual reference photograph of that real place: everyday materials, believable wear, plain practical furnishings appropriate to the place's established type and use, natural daylight or simple ceiling lighting. Strictly avoid luxury, showroom, hotel-suite, boutique-design, high-end-retail, or magazine-staging styling. No marble surfaces, no chandeliers, no designer furniture, no polished decor displays, no curated styling props, no glossy magazine finish. When the supplied inputs establish a currently occupied dwelling, its rooms carry the ordinary, unstaged traces of the residents' daily life, accumulated naturally on surfaces and in corners — never a bare, just-moved-in or showroom-empty room — and which particular belongings show this is the image's own choice. Whenever the supplied inputs establish a different place type, occupancy state, age or condition, that established fact wins over every default in this entire style contract.\n\nThe supplied reference image shows the SAME physical room as this background, from a different camera angle or framing. Inherit the exact architecture, floor, walls, windows, fixed furniture and lighting of that room — this is literally the same space, only the viewpoint changes.\n\nREFERENCE PLAN: mode='same_physical_space_view'\n  - selected_refs[0]: ref_bg_id='L10B02' physical_space_id='fp_l10_rock_entrance_space_1'\n\nCAMERA DECISION (exact, from validated plan):\n  - camera_unit: 4\n  - camera_cell: [4, 6]\n  - look_at_unit: 5\n  - look_at_cell: [3, 8]\n  - lens_enum: 'telephoto'\n  - fov_deg: 25\n  - framing_notes: 'Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue.'\n\nRENDER GUIDANCE (from validated plan):\n  - visible_space_directive: From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.\n  - camera_framing_directive: Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.\n  - subject_position_directive: Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.\n  - state_cue_directive: Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.\n  - negative_continuity_directive: Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements.\n\n미국 북동부 산림·산악권의 자연 암반 안쪽에 숨겨진 25세기 초반 지하 접촉소 입구를 실제 카메라로 촬영한 다큐멘터리 풍 사진. 강화된 문턱 구역 바로 안쪽에서 접촉실의 드러난 가장자리를 바라본다. 거칠고 습기 어린 암벽과 오래 마모된 금속 보강재, 산화 흔적이 남은 배선 덮개, 수세기 동안 수리하며 사용한 구형 설비가 축적된 현실적인 공간이다. 접촉실 측면 벽에는 원형 통신판이 고정되어 있고, 그 활성 판면 안에만 승인되지 않은 권한 주체를 감지한 경고가 절제된 기호와 상태 표시로 나타난다. 천장 중앙의 지도판도 활성화되어 있으며, 산악 지형을 에워싸는 여러 붉은 지점이 판면 내부의 지도 정보로만 표시되고 허공에는 어떤 그래픽도 떠 있지 않는다.\n\n화면 아래쪽 가까운 전경에는 화면 밖 방문객의 장비에 매달린 투명한 방수 주머니가 보인다. 긁힘과 접힘이 있는 방수 소재 안에 익숙한 구시대형 스마트폰이 들어 있으며, 전화기의 진동 때문에 주머니 표면과 결속부에 아주 미세한 흔들림만 포착된다. 인물이나 손, 얼굴, 신체 형상은 전혀 보이지 않으며, 거의 정지한 주변과 작은 진동의 대비로 억제된 긴장감을 전달한다. 원형 통신판의 권한 경고는 선명하게 읽히는 두 번째 초점이고, 천장 지도판의 붉은 포위 지점은 상단 배경의 연속성 요소로 남긴다.\n\n서 있는 사람의 눈높이 약 1.6미터에서 실제 디지털 일안 반사식 또는 미러리스 카메라와 풀프레임 환산 50밀리미터 표준 렌즈로 촬영한다. 낮고 실용적인 설비 조명과 판면에서 새어 나오는 제한된 빛, 절제된 저채도 색감, 과장되지 않은 중저명암 대비를 사용한다. 실제 암석의 수분 얼룩, 콘크리트의 균열, 금속의 산화와 손때, 방수 소재의 주름과 투명도, 스마트폰 유리의 반사를 정확히 표현한다. 자연스러운 피사계 심도와 현실적인 노출을 유지하며, 깨끗한 상품 사진이나 컴퓨터 그래픽, 삽화, 건축 시각화가 아닌 실제 장소 기록 사진처럼 보이게 한다. 후처리 효과 없이 사실적으로 촬영하며, 평면도나 위에서 내려다본 구도는 금지한다. 16:9 가로 비율, 실제 카메라 촬영본\n\nOne attached image is a PHOTOREAL RENDER of this SAME place — the same physical location, possibly seen from a different angle or at a different moment. Treat it as the PLACE IDENTITY reference. Keep this render consistent with it: the same spatial layout and architecture, the same surface materials and colors, and the same permanently installed fixtures and furniture. Lettering visible in the reference is reproduced EXACTLY — same characters, same mark, same position; never invent different wording from render to render. Camera angle, framing, lighting, time of day and weather follow THIS prompt — do NOT copy the reference's composition or mood; only the place's physical identity carries over.",
        "camera_decision": {
          "camera_unit": 4,
          "camera_cell": [
            4,
            6
          ],
          "look_at_unit": 5,
          "look_at_cell": [
            3,
            8
          ],
          "lens_enum": "telephoto",
          "fov_deg": 25,
          "framing_notes": "Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue."
        },
        "shot_aware_plan_node_index": 2,
        "shot_aware_plan_mode": "same_physical_space_view",
        "render_guidance": {
          "visible_space_directive": "From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.",
          "camera_framing_directive": "Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.",
          "subject_position_directive": "Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.",
          "state_cue_directive": "Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.",
          "negative_continuity_directive": "Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements."
        },
        "attached_reference_lineage": {
          "fp_id": "fp_l10_rock_entrance",
          "prior_bg_ids": [
            "L10B02"
          ],
          "attached_ref_labels": [
            "bg:L10B02",
            "same_loc_anchor:L10B01"
          ],
          "ref_used": "refs_2",
          "db_write_policy": "checkpoint_only"
        },
        "same_loc_anchor_ref": {
          "anchor_bg_id": "L10B01",
          "loc_id": "L10"
        }
      }
    },
    "consumed_bg_catalog_hash": "4edb84b98cd3db15",
    "consumed_shot_binding_hash": "42cbc46b2974a8e8",
    "bg_reference_catalog": [
      {
        "bg_id": "L10B01",
        "fp_id": "fp_l10_rock_entrance",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B01.png",
        "mode": "fp_seeded_anchor",
        "node_index": 0,
        "source_bg_ids": [],
        "ingestion_order": 0,
        "source_kind": "shot_aware_plan"
      },
      {
        "bg_id": "L10B02",
        "fp_id": "fp_l10_rock_entrance",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B02.png",
        "mode": "same_physical_space_view",
        "node_index": 1,
        "source_bg_ids": [
          "L10B01"
        ],
        "ingestion_order": 1,
        "source_kind": "shot_aware_plan"
      },
      {
        "bg_id": "L10B03",
        "fp_id": "fp_l10_rock_entrance",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/37154490-a4ed-4b37-9092-489c054d8a72/episodes/9fc33eb1-970b-4e5e-8b98-53732d321d63/images/background_chain/L10B03.png",
        "mode": "same_physical_space_view",
        "node_index": 2,
        "source_bg_ids": [
          "L10B02"
        ],
        "ingestion_order": 2,
        "source_kind": "shot_aware_plan"
      }
    ]
  },
  "step_id": "background_render",
  "run_id": "62e38c22-0cd9-48ae-bd16-cf301e45276e",
  "resolved_model": "gpt",
  "updated_at": "2026-09-05T07:05:08.836686+00:00",
  "project_config_snapshot": {}
}