{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 10, "config_hash": "98833fa1843c165d", "data": { "per_fp": { "fp_l10_rock_entrance": { "fp_id": "fp_l10_rock_entrance", "shot_aware_bg_render_plan_status": "ok", "graph": { "nodes": [ { "bg_id": "L10B01", "node_index": 0, "mode": "fp_seeded_anchor", "is_dwelling_identity_anchor": true, "rationale": "L10B01 is the sole supplied clean-anchor candidate and establishes dwelling identity directly from the floor plan. For S7_Shot4, camera unit 1 at [4,1] looks toward unit 2 and opening marker 3 at [4,4] with a wide 90-degree view, providing broad coverage of target units 1, 2, 4, and 5 while carrying transient marker 8.", "reference_decision": { "selected_refs": [], "rejected_refs": [], "same_physical_space_dedup_decision": "no_reference_anchor", "why_single_ref_or_two_refs": "No reference is used because this first node is the required floor-plan-seeded dwelling identity anchor.", "physical_space_id_per_ref": [], "same_physical_space_low_delta_candidate": false, "low_delta_reuse_target_bg_id": "", "low_delta_rationale": "" }, "camera_decision": { "camera_unit": 1, "camera_cell": [ 4, 1 ], "look_at_unit": 2, "look_at_cell": [ 4, 4 ], "lens_enum": "wide", "fov_deg": 90, "framing_notes": "Use the listed unit-1 camera cell and look toward unit 2 at the shared marker-2/marker-3 cell; the wide lens supports the committed full-body staging and broad architectural coverage." }, "render_guidance": { "visible_space_directive": "From camera unit 1, show opening marker 3 and the connected progression through units 2 and 4 toward unit 5; use the wide view to retain the structural context of target units 1, 2, 4, and 5 without asserting visibility beyond the geometry superset.", "camera_framing_directive": "Place the camera at unit 1 cell [4,1] and aim toward unit 2 cell [4,4] with a wide 90-degree field of view, giving broad coverage around opening marker 3 and enough depth for the staged full-body reveal in S7_Shot4.", "subject_position_directive": "Place the committed full-body subject within the interior center beyond opening marker 3, with the braced pose and outward-directed action associated with transient marker 8 arranged obliquely past the camera rather than toward the lens.", "state_cue_directive": "Carry transient marker 8 as staged in S7_Shot4, retain use markers 1, 2, 3, 4, and 5, and present opening marker 3 in the fully open state committed by the shot.", "negative_continuity_directive": "Exclude ignored overlay markers 9, 10, and 11. Do not introduce units outside the selected view-cone superset, alter opening marker 3 away from its committed open state, or add unlisted scenario-specific elements." }, "render_action": "render_new_plate", "reuse_target_bg_id": "", "anchor_shot_id": "", "projection_card_id": "", "projection_card_hash": "", "projection_card_state": "not_applicable", "projection_card_fallback_reason": "no_projection_card_target", "projection_card_source_bg_id": "L10B01", "projection_card_inherited": false, "plate_group_id": "L10B01", "plate_anchor_bg_id": "L10B01", "needs_new_plate": true, "plate_anchor_shot_id": "", "plate_shareability": "exclusive", "render_order_index": 0, "ref_tree_parents": [], "ref_role_per_parent": {}, "max_refs": 2, "render_action_source": "geometry_route", "partition_fallback_reason": "partition_plan_missing" }, { "bg_id": "L10B02", "node_index": 1, "mode": "same_physical_space_view", "is_dwelling_identity_anchor": false, "rationale": "S7_Shot15 remains in the same physical-space system established by L10B01 but requires a distinct upward insert centered on fixed marker 7 and transient markers 9 and 10. Camera unit 5 at [3,7] looking within unit 5 toward [6,7] is structurally different from the anchor framing, so a new same-space plate is required.", "reference_decision": { "selected_refs": [ { "ref_bg_id": "L10B01", "physical_space_id": "fp_l10_rock_entrance_space_1", "space_description": "The connected physical-space system containing units 1, 2, 4, and 5 and opening marker 3." } ], "rejected_refs": [], "same_physical_space_dedup_decision": "single_reference_same_physical_space", "why_single_ref_or_two_refs": "A single reference is sufficient because S7_Shot15 isolates unit 5 within the same connected physical space and does not require two distinct co-visible spaces.", "physical_space_id_per_ref": [ "fp_l10_rock_entrance_space_1" ], "same_physical_space_low_delta_candidate": false, "low_delta_reuse_target_bg_id": "", "low_delta_rationale": "" }, "camera_decision": { "camera_unit": 5, "camera_cell": [ 3, 7 ], "look_at_unit": 5, "look_at_cell": [ 6, 7 ], "lens_enum": "telephoto", "fov_deg": 25, "framing_notes": "Use the listed unit-5 camera cell and listed marker-7 look-at cell for a narrow, compressed insert that retains only limited surrounding structural context." }, "render_guidance": { "visible_space_directive": "Confine the visible space to unit 5 and the overhead footprint at fixed marker 7, retaining only the surrounding unit-5 structural surface needed as scale reference. Preserve the unit boundaries and fixed opening relationships established by L10B01 even where they fall outside this narrow framing.", "camera_framing_directive": "Place the camera at unit 5 cell [3,7] and aim within unit 5 toward cell [6,7] using a telephoto 25-degree field of view. Use compressed, narrow coverage so the marker-7 content surface occupies the committed central portion while a limited surrounding perimeter remains visible.", "subject_position_directive": "S7_Shot15 commits no subject or character placement. Keep the background free of invented subjects and frame only the listed fixed and transient marker content.", "state_cue_directive": "Keep fixed markers 6 and 7 in their floor-plan positions, present marker 7 with transient markers 9 and 10 in the active state committed by S7_Shot15, and retain the restrained low-key state specified by the shot without adding further cues.", "negative_continuity_directive": "Exclude ignored markers 8 and 11. Preserve the fixed positions of unit 5 and markers 6 and 7 relative to L10B01, do not expand the telephoto view into unrelated units, and do not add unlisted overlay cues or scenario-specific elements." }, "render_action": "render_new_plate", "reuse_target_bg_id": "", "anchor_shot_id": "", "projection_card_id": "", "projection_card_hash": "", "projection_card_state": "not_applicable", "projection_card_fallback_reason": "no_projection_card_target", "projection_card_source_bg_id": "L10B02", "projection_card_inherited": false, "plate_group_id": "L10B02", "plate_anchor_bg_id": "L10B02", "needs_new_plate": true, "plate_anchor_shot_id": "", "plate_shareability": "exclusive", "render_order_index": 1, "ref_tree_parents": [ "L10B01" ], "ref_role_per_parent": { "L10B01": "space_continuity" }, "max_refs": 2, "render_action_source": "geometry_route", "partition_fallback_reason": "partition_plan_missing" }, { "bg_id": "L10B03", "node_index": 2, "mode": "same_physical_space_view", "is_dwelling_identity_anchor": false, "rationale": "S7_Shot20 uses the same physical space and fixed unit-5 elements represented by L10B02, but camera unit 4 at [4,6] looks toward marker 6 at [3,8] for a close subject-oriented slice spanning units 4 and 5. This geometry differs from L10B02's unit-5 upward view and reveals a different fixed fixture region, requiring a new plate rather than low-delta reuse.", "reference_decision": { "selected_refs": [ { "ref_bg_id": "L10B02", "physical_space_id": "fp_l10_rock_entrance_space_1", "space_description": "The connected unit-4/unit-5 interior portion with fixed markers 6 and 7." } ], "rejected_refs": [ { "ref_bg_id": "L10B01", "reason": "L10B02 is the more direct earlier representative for continuity of unit 5 and fixed markers 6 and 7 in the state-facing interior shots." } ], "same_physical_space_dedup_decision": "single_reference_same_physical_space", "why_single_ref_or_two_refs": "A single reference is sufficient because S7_Shot20 frames one connected physical space across units 4 and 5; no two distinct co-visible spaces are committed.", "physical_space_id_per_ref": [ "fp_l10_rock_entrance_space_1" ], "same_physical_space_low_delta_candidate": false, "low_delta_reuse_target_bg_id": "", "low_delta_rationale": "" }, "camera_decision": { "camera_unit": 4, "camera_cell": [ 4, 6 ], "look_at_unit": 5, "look_at_cell": [ 3, 8 ], "lens_enum": "telephoto", "fov_deg": 25, "framing_notes": "Use the listed unit-4 camera cell and listed marker-6 look-at cell for compressed close coverage toward unit 5, leaving room at the lower edge for the staged transient marker 11 cue." }, "render_guidance": { "visible_space_directive": "From camera unit 4, show the adjacent portion of unit 5 around fixed marker 6, with only the limited unit-4 foreground and unit-5 background slice supported by the telephoto view. Maintain fixed markers 6 and 7 in the same physical positions established through L10B02, although marker 7 need not dominate this framing.", "camera_framing_directive": "Place the camera at unit 4 cell [4,6] and aim toward unit 5 cell [3,8] with a telephoto 25-degree field of view. Use narrow, compressed coverage for the committed close framing, keeping the subject area dominant and the marker-11 cue at the lower edge.", "subject_position_directive": "Place the committed foreground subject across most of the frame in the staged front three-quarter orientation, with the gaze lowered toward transient marker 11 at the lower frame edge; retain only the small background slice needed to locate the subject relative to units 4 and 5.", "state_cue_directive": "Carry transient markers 9 and 10 as the committed active system cues and marker 11 in the post-action state specified by S7_Shot20. Keep fixed markers 6 and 7 structurally stable and do not introduce an additional state or light source.", "negative_continuity_directive": "Exclude ignored marker 8. Preserve the fixed positions of markers 6 and 7 and the unit-4/unit-5 relationship inherited from L10B02; do not copy L10B02's upward marker-7 insert framing, expand beyond the narrow view, or add unlisted scenario-specific elements." }, "render_action": "render_new_plate", "reuse_target_bg_id": "", "anchor_shot_id": "", "projection_card_id": "", "projection_card_hash": "", "projection_card_state": "not_applicable", "projection_card_fallback_reason": "no_projection_card_target", "projection_card_source_bg_id": "L10B03", "projection_card_inherited": false, "plate_group_id": "L10B03", "plate_anchor_bg_id": "L10B03", "needs_new_plate": true, "plate_anchor_shot_id": "", "plate_shareability": "exclusive", "render_order_index": 2, "ref_tree_parents": [ "L10B02" ], "ref_role_per_parent": { "L10B02": "space_continuity" }, "max_refs": 2, "render_action_source": "geometry_route", "partition_fallback_reason": "partition_plan_missing" } ] }, "validators": { "required_shape_ok": true, "graph_completeness_ok": true, "node_index_order_ok": true, "dag_ok": true, "max_refs_per_bg_ok": true, "two_refs_distinct_spaces_ok": true, "same_fp_only_ok": true, "anchor_exactly_one_ok": true, "anchor_in_clean_candidate_set_ok": true, "camera_in_candidates_ok": true, "rationale_and_mode_ok": true, "synthetic_readback_production_clear": true, "all_validators_passed": true, "diagnostics": [], "render_action_routing_ok": true, "reuse_plate_count": 0, "card_withhold_count": 0, "projection_card_state_counts": { "not_applicable": 3 }, "plate_group_count": 3, "plate_shareability_counts": { "exclusive": 3 }, "dag_node_count": 3, "space_partition_applied": false, "space_partition_fallback_reason": "partition_plan_missing" }, "real_api_call_counts": { "image": 0, "llm": 1, "vlm": 0 }, "readback_status": "ok", "production_clear": true, "diagnostics": [] } }, "real_api_call_counts": { "image": 0, "llm": 1, "vlm": 0 }, "llm_provider_attempts_per_fp": { "fp_l10_rock_entrance": 1 }, "shot_staging_index_diagnostics": { "shot_staging_index_explicit_id": 0, "shot_staging_index_synthesized_id": 19, "shot_staging_index_dropped_no_id": [], "shot_staging_index_dropped_bad_index_type": [], "shot_staging_index_collisions": [] } }, "step_id": "shot_aware_bg_render_plan", "run_id": "96c9f9e8-00af-43fe-80c3-4ab8266deb64", "resolved_model": "gpt", "updated_at": "2026-09-04T21:16:50.872987+00:00", "project_config_snapshot": {} }