{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 2, "config_hash": "b721e41033bb6bac", "data": { "floor_plans": { "fp_l11_contact_cellar": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan of a compact underground mountain contact cellar. Use clean CAD-like geometric shapes, single-weight black outlines, and a white or off-white background. Absolutely no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, texture, surface materials, or decorative effects. Show an irregular but compact rock-hewn rectangular chamber with survivalist layout conventions: a single fortified entrance in the west wall, a central shared operations room, a separated isolation and scanning bay in the northeast, and a concealed one-person crawl tunnel extending from the east wall beneath a small ventilation opening. Use only flat solid pastel area fills: Shared Zone in pale yellow, Service Zone in pale cyan, Threshold Zone in pale beige, and Utility Zone in pale gray. Area labels may use only those four generic zone names. Draw numbered base markers 1 through 16 exactly once as small white circles with black numbers: 1 central shared operations room, 2 northeast isolation bay, 3 west entrance threshold, 4 narrow east crawl tunnel, 5 heavy inward-closing rock door with a standard door swing or movement symbol, 6 manual door handle and locking control beside the rock door, 7 paired rectangular workstations with simple chair glyphs in the south-central room, 8 blank built-in monitor and map bank along the north wall, 9 transparent rectangular isolation unit in the northeast bay, 10 fixed scanner station beside the isolation unit, 11 tall metal storage cabinet near the northwest side, 12 circular communication projection disc near the center of the room, 13 archival record cabinet against the northeast wall, 14 concealed wall hatch opening into the crawl tunnel, 15 fixed record-erasure lever beside the east end of the workstations, and 16 small ventilation duct opening above the tunnel hatch. Use standard top-down symbolic furniture and opening glyphs only. Keep monitor surfaces blank. Do not draw markers 17 through 24 because they are transient overlay cues. Do not depict people, weapons, a loose phone, warning illumination, map alerts, scan results, falling dust, breach damage, glowing effects, or erased screens. No camera icons, view cones, dimensions, legends, annotations, or text other than the four generic area labels and an optional small north arrow.", "key_elements": [ "Compact single-level underground operations cellar", "West fortified rock door and entrance threshold", "Central paired workstations and built-in monitor bank", "Northeast isolation and scanning bay", "Circular communication projection fixture", "Metal storage and archival cabinets", "Concealed east crawl-tunnel hatch beneath ventilation opening", "Mechanical door control and record-erasure lever", "Transient lockdown, scanning, impact, breach, and erasure states reserved for overlays" ], "numbered_elements": [ { "number": 1, "label": "shared operations room", "category": "area", "position_hint": "central and western portion of the underground chamber", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "isolation bay", "category": "area", "position_hint": "northeast corner of the chamber", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "entrance threshold", "category": "area", "position_hint": "inside the west wall rock door", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "crawl tunnel", "category": "area", "position_hint": "narrow passage extending east from the concealed hatch", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "rock door", "category": "opening", "position_hint": "center of the west wall", "base_layer_decision": "base_opening" }, { "number": 6, "label": "manual door control", "category": "prop", "position_hint": "interior wall immediately beside the rock door", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "paired workstations", "category": "furniture", "position_hint": "south-central side of the shared operations room", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "monitor and map bank", "category": "prop", "position_hint": "built into the north wall of the shared operations room", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "transparent isolation unit", "category": "prop", "position_hint": "center of the northeast isolation bay", "base_layer_decision": "base_persistent_fixture" }, { "number": 10, "label": "scanner station", "category": "prop", "position_hint": "beside the isolation unit in the northeast bay", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "metal storage cabinet", "category": "furniture", "position_hint": "northwest side of the room near the entrance threshold", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "communication projection disc", "category": "prop", "position_hint": "near the center of the shared operations room", "base_layer_decision": "base_persistent_fixture" }, { "number": 13, "label": "archival record cabinet", "category": "furniture", "position_hint": "against the northeast wall behind the isolation equipment", "base_layer_decision": "base_persistent_furniture" }, { "number": 14, "label": "concealed tunnel hatch", "category": "opening", "position_hint": "east wall, opening from the operations room into the crawl tunnel", "base_layer_decision": "base_opening" }, { "number": 15, "label": "record erasure lever", "category": "prop", "position_hint": "east end of the workstation bank near the tunnel hatch", "base_layer_decision": "base_persistent_fixture" }, { "number": 16, "label": "ventilation duct opening", "category": "opening", "position_hint": "east wall above the concealed tunnel hatch", "base_layer_decision": "base_opening" }, { "number": 17, "label": "red lockdown illumination", "category": "prop", "position_hint": "throughout the main room during lockdown", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 18, "label": "encirclement and false-exit map state", "category": "prop", "position_hint": "on the north-wall map bank", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 19, "label": "abnormal scanner readout", "category": "prop", "position_hint": "on the scanner station display in the isolation bay", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 20, "label": "legacy phone in isolation unit", "category": "prop", "position_hint": "temporarily placed inside the transparent isolation unit", "base_layer_decision": "state_overlay_transient_object" }, { "number": 21, "label": "impact dust and debris", "category": "prop", "position_hint": "falling beneath the ceiling near the western half of the room", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 22, "label": "active door breach ring", "category": "prop", "position_hint": "on the inner face of the west rock door", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 23, "label": "white record erasure state", "category": "prop", "position_hint": "across the monitor bank and workstation displays during evacuation", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 24, "label": "interrogation long gun", "category": "prop", "position_hint": "temporarily carried in the central operations room", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L11B02", "sub_location": "mountain_contact_cellar", "camera_position": "near number 14 (concealed tunnel hatch), facing diagonally west across number 7 (paired workstations) toward number 5 (rock door) and number 22 (active breach ring)", "camera_height": "eye-level standing ~1.6m", "lens_hint": "28mm wide angle", "framing_notes": "Keep number 9 and number 10 visible at frame right, number 8 along the rear wall, and the threatened rock door prominent at frame left; preserve the cramped interrogation distance in the center.", "use_numbered_elements": [ 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 ], "ignore_numbered_elements": [ 23 ] }, { "bg_id": "L11B01", "sub_location": "crawl_tunnel_access", "camera_position": "inside number 4 (crawl tunnel) near number 14 (concealed tunnel hatch), facing back into number 1 (shared operations room) toward number 15 (record erasure lever) and number 8 (monitor bank)", "camera_height": "low crawling height ~0.8m", "lens_hint": "24mm wide angle", "framing_notes": "Use the tunnel walls as a tight foreground frame, keep the open hatch and lever readable, and show the white-erased workstation and monitor surfaces beyond.", "use_numbered_elements": [ 1, 4, 7, 8, 12, 14, 15, 16, 23 ], "ignore_numbered_elements": [ 17, 18, 19, 20, 21, 22, 24 ] } ], "scale_guideline": "The contact cellar is a single underground level; its height is not specified, so use a typical compact bunker clear height of roughly 2.2–2.6 meters. The main occupied chamber should have a typical footprint of about 8–12 meters by 5–8 meters, while the crawl tunnel is only wide and high enough for one person to move through on hands and knees. The plan has no windows and has two human-access openings supported by the scene: one fortified rock door and one concealed crawl-tunnel hatch, plus a smaller ventilation opening above the tunnel access. The crawl tunnel continues beyond the mapped room to a remote hillside exit, but its total length and level change are unspecified.", "applied_shots": [ "S1_Shot1", "S1_Shot9", "S1_Shot12", "S2_Shot3", "S2_Shot8", "S2_Shot11", "S3_Shot8", "S3_Shot12", "S3_Shot13", "S4_Shot7", "S4_Shot10", "S5_Shot7", "S5_Shot8", "S5_Shot11", "S6_Shot11", "S6_Shot13", "S6_Shot17" ], "group_id": "bg_mountain_contact_facility", "depends_on_fp": [] }, "fp_l12_secret_exit_forest": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic site plan of a concealed rock exit on an inland mountain slope. Use a clean architectural CAD-plan appearance with single-weight black outlines, an off-white background, simple geometric terrain boundaries, sparse contour lines, and conventional top-down symbols only. This must be strictly two-dimensional: no 3D, no isometric or axonometric view, no perspective, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendering, no lighting effects, no textured surfaces, and no material rendering. Arrange the site with a compact concealed exit threshold below a rugged rock outcrop, a narrow crawl-tunnel mouth opening through the rock, a traversable lower mountainside route crossing the slope, a forest edge downslope and toward the southwest, and a higher summit ridge visible in plan toward the north or northeast. Reflect a practical concealed mountain egress layout: the tunnel mouth is screened by irregular rock geometry, the lower route follows the contour rather than running straight down the steepest slope, and the forest begins beyond a broken rocky margin. Use one consistent flat pastel solid fill for each area: Threshold Zone pale beige, Route Zone pale gray, Forest Zone pale green, Ridge Zone pale lavender, and Rock Zone pale tan. Do not blend colors and do not use gradients or drop shadows. Show the forest edge with sparse simple circle-and-line tree glyphs and show the tunnel mouth as a narrow opening in the rock boundary; all symbols remain flat and schematic. Place small numbered circles exactly once for base markers 1 through 6 only: 1 in the exit threshold area, 2 at the crawl-tunnel mouth, 3 on the lower mountainside route, 4 within the forest-edge area, 5 on the summit ridge, and 6 within the screening rock outcrop. Do not draw markers 7, 8, 9, 10, or 11 because they are transient state overlays. Minimal text inside the drawing: only the generic area labels Threshold Zone, Route Zone, Forest Zone, Ridge Zone, and Rock Zone, plus an optional small north arrow marked N. No camera icons, field-of-view cones, route arrows, object names, legends, measurements, or other annotations.", "key_elements": [ "Concealed rock exit threshold screened by natural outcrop", "Single narrow crawl-tunnel mouth through the rock boundary", "Contour-following lower mountainside route toward the southwest", "Broken forest edge below the rocky slope", "Higher summit ridge retained as distant plan context", "Transient pursuit lights, transmitter, signal lamp, wet surfaces, and fresh collapse excluded from the base diagram" ], "numbered_elements": [ { "number": 1, "label": "concealed exit threshold", "category": "area", "position_hint": "central upper slope, directly outside the tunnel mouth beneath the rock outcrop", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "crawl tunnel mouth", "category": "opening", "position_hint": "rock face at the uphill edge of the exit threshold", "base_layer_decision": "base_opening" }, { "number": 3, "label": "lower mountainside route", "category": "area", "position_hint": "crossing the slope from the exit threshold toward the southwest forest edge", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "forest edge", "category": "area", "position_hint": "downslope and southwest of the concealed exit", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "summit ridge", "category": "area", "position_hint": "north to northeast, uphill beyond the secret exit site", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "screening rock outcrop", "category": "area", "position_hint": "surrounding and partially concealing the tunnel mouth on the uphill side", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "decoy pursuit lights", "category": "prop", "position_hint": "clustered along the empty summit ridge around number 5", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 8, "label": "planted miniature transmitter", "category": "prop", "position_hint": "at the exit threshold near number 1 after removal from a garment seam", "base_layer_decision": "state_overlay_transient_object" }, { "number": 9, "label": "distant covert signal lamp", "category": "prop", "position_hint": "deep beyond the forest edge associated with number 4", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 10, "label": "rain-wet rock and ground", "category": "area", "position_hint": "across the exit threshold, route, and exposed rock surfaces", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 11, "label": "fresh concealed rockfall", "category": "prop", "position_hint": "immediately behind the crawl tunnel mouth near number 2 following the quiet collapse", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L12B01", "sub_location": "secret_exit_forest_site", "camera_position": "near number 3 (lower mountainside route), just downslope of number 1 (concealed exit threshold), facing diagonally uphill toward number 2 (crawl tunnel mouth) and number 5 (summit ridge) while retaining number 4 (forest edge) along the lateral background", "camera_height": "eye-level standing ~1.6m", "lens_hint": "28mm wide angle", "framing_notes": "Keep numbers 1, 2, 6, 8, 10, and 11 in the nearer rocky field; retain number 7 as small distant activity on the summit and number 9 as a single remote point beyond the forest edge. Compose broadly enough to support tighter crops without changing the background camera.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This is an exterior mountainside site with no above-ground storeys; the associated contact space is underground, and its full depth and height are not specified. The only confirmed opening in scope is one crawl-sized rock exit described as barely sufficient for a single person. Treat the immediate exit, route, and forest margin as a compact local egress site, while the summit ridge remains distant context; the stated rendezvous nine kilometers to the southwest is outside this plan. Preserve a clear vertical rise from the lower exit and forest edge to the higher summit ridge, but do not invent an exact elevation difference.", "applied_shots": [ "S7_Shot3", "S7_Shot10", "S7_Shot13" ], "group_id": "bg_mountain_contact_facility", "depends_on_fp": [] } }, "consumed_bg_catalog_hash": "ef9206e193be155b", "consumed_shot_binding_hash": "82ab9c737571f47f" }, "step_id": "floor_plan_prompt", "run_id": "5a45059b-905c-43e2-abcf-61cc3aae0f7a", "resolved_model": "gpt", "updated_at": "2026-09-05T08:17:18.483042+00:00", "project_config_snapshot": {} }