{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 2, "config_hash": "e6e33947729739e1", "data": { "floor_plans": { "fp_l04_rooftop_exterior": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a contemporary rooftop exterior on an older low-rise urban villa. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric shapes only, and minimal text. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, or material rendering. Show a compact rectangular rooftop room along the east side of an open roof deck, reflecting a practical contemporary coastal urban layout: an iron entry door and a small front window on the west-facing facade, a separate small window on the south facade, an exposed water tank in the northwest service corner, a clothesline in the southwest open area, a low rectangular drying platform beneath it, a stair access landing at the southwest roof edge, and a protective parapet around the roof perimeter. Depict the door with a standard plan swing arc, each window as double parallel lines within its wall, the water tank as one simple circular fixture glyph, the clothesline as one contiguous thin-line fixture, and the drying platform as a plain rectangle. Apply single flat pastel zone fills with no blending: pale gray for the open Rooftop Zone, pale blue for the Rooftop Room, pale cyan for the Water Service Zone, pale yellow for the Drying Zone, and pale beige for the Stair and Entry Threshold Zones. Place one small circled black number exactly once for each base element: 1 on the open rooftop deck, 2 inside the rooftop room, 3 at the iron entry door, 4 at the front window, 5 at the side window, 6 on the water tank, 7 on the single clothesline run, 8 on the drying platform, 9 at the stair access landing, and 10 on one representative south parapet run. Do not draw markers 11 through 17 and do not depict any windblown leaves, flyer, forced-door state, attacker silhouette, police light, dawn glow, or police responders; these are transient overlay content. Only short generic zone labels and an optional small north arrow may appear as text. Do not draw camera icons, field-of-view cones, arrows, dimensions, legends, decorative objects, people, vehicles, or event annotations.", "key_elements": [ "Open rooftop deck surrounding a compact rooftop residential annex", "Simple iron entry door on the annex facade", "Separate front and side windows", "Exposed rooftop water tank in a service corner", "Clothesline and low drying platform in the open drying zone", "Stair arrival connecting the lower building to the roof", "Continuous protective parapet around the roof edge", "Attack, police-arrival, and dawn-light conditions reserved for transient overlays" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Open rooftop deck", "number": 1, "position_hint": "central and western portion of the roof" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Rooftop room", "number": 2, "position_hint": "east side of the roof deck" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Iron entry door", "number": 3, "position_hint": "west facade of the rooftop room, facing the open roof deck" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Front window", "number": 4, "position_hint": "west facade of the rooftop room, beside the iron entry door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Side window", "number": 5, "position_hint": "south facade of the rooftop room" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Rooftop water tank", "number": 6, "position_hint": "northwest service corner of the roof" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Clothesline", "number": 7, "position_hint": "southwestern drying zone, spanning one contiguous run" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Drying platform", "number": 8, "position_hint": "south-central roof deck beneath the clothesline" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Stair access landing", "number": 9, "position_hint": "southwest edge of the roof deck" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Roof parapet", "number": 10, "position_hint": "one representative contiguous run along the south roof edge" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Windblown dried herb leaves", "number": 11, "position_hint": "around the drying platform and approach to the entry door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Flyer lodged in door gap", "number": 12, "position_hint": "at the latch-side gap of the iron entry door" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "Forced partially open door state", "number": 13, "position_hint": "at the iron entry door on the west facade" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Attacker silhouette in window", "number": 14, "position_hint": "within the front window beside the entry door" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Flashing police light wash", "number": 15, "position_hint": "across the stair arrival and rooftop-room exterior" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Warm dawn window glow", "number": 16, "position_hint": "within the front and side window glazing of the rooftop room" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Police responders", "number": 17, "position_hint": "single group at the rooftop stair arrival" } ], "camera_recommendations": [ { "bg_id": "L04B02", "camera_height": "high aerial, approximately one to two storeys above the rooftop", "camera_position": "above the southwest corner near number 9 (stair access), looking diagonally across number 1 (roof deck) toward number 2 (rooftop room) and number 6 (water tank)", "framing_notes": "Show the complete rooftop arrangement, including the drying area, rooftop room, water tank, stair access, and enclosing parapet in a calm daytime establishing view.", "ignore_numbered_elements": [ 11, 12, 13, 14, 15, 16, 17 ], "lens_hint": "28mm wide angle", "sub_location": "rooftop_room_exterior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] }, { "bg_id": "L04B04", "camera_height": "low standing eye level, approximately 1.5m", "camera_position": "near number 8 (drying platform), facing diagonally toward number 3 (iron entry door) and number 4 (front window)", "framing_notes": "Make the forced doorway and window the dominant background anchors; keep the water tank and clothesline as peripheral rooftop context while depicting the attack-state overlays.", "ignore_numbered_elements": [ 15, 16, 17 ], "lens_hint": "35mm wide angle", "sub_location": "rooftop_room_entry", "use_numbered_elements": [ 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] }, { "bg_id": "L04B03", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 9 (stair access), facing toward number 3 (iron entry door) with number 2 (rooftop room) beyond", "framing_notes": "Preserve a clear route from the stair arrival to the rooftop-room entrance and allow flashing emergency light to reach the room exterior and parapet.", "ignore_numbered_elements": [ 11, 12, 13, 14, 16 ], "lens_hint": "28mm wide angle", "sub_location": "rooftop_stair_arrival", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 8, 9, 10, 15, 17 ] }, { "bg_id": "L04B01", "camera_height": "slightly elevated exterior viewpoint, approximately 2.2m above roof level", "camera_position": "near the southwest parapet at number 10, facing diagonally toward number 2 (rooftop room), number 4 (front window), and number 5 (side window)", "framing_notes": "Frame the compact rooftop room against the blue dawn roofscape, with warm interior glow visible through its windows and the parapet defining the roof edge.", "ignore_numbered_elements": [ 11, 12, 13, 14, 15, 17 ], "lens_hint": "35mm wide angle", "sub_location": "rooftop_room_exterior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16 ] } ], "scale_guideline": "The underlying older urban villa is typically three to four full storeys plus one small rooftop room for this regional building type; the exact storey count is not specified, and a typical floor-to-floor height is about 2.7–3.0 m. The roof deck is typically roughly 8–12 m across, while the rooftop room is a compact one-room annex occupying only a minority of the roof. The annex has one exterior entry door and at least two exterior windows, represented here as one front window and one side window. The stair connection rises through the full main building to the rooftop landing, while the water tank and a waist-high protective parapet remain entirely at roof level.", "applied_shots": [ "S4_Shot1", "S10_Shot4", "S10_Shot6", "S13_Shot2", "S13_Shot4", "S17_Shot1" ], "group_id": "bg_rooftop_villa", "depends_on_fp": [] }, "fp_l05_rooftop_home": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2020s Korean urban rooftop dwelling. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric plan symbols only, and minimal text. Strictly exclude 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, and material rendering. Use solid flat pastel fills with no blending: pale yellow for the shared living and dining area, pale cyan for the kitchen and bathroom service zones, pale blue for both private bedrooms, pale beige for the entry threshold, and pale gray for the rooftop utility apron and stair landing. Short generic area text may read Shared Zone, Private Zone, Service Zone, Threshold Zone, and Utility Zone; include no other written labels except a small north arrow if desired. Lay out a modest single-level rooftop home entered directly from an exterior roof apron through one metal swing door into a small threshold and central living-dining room. Place a narrow wall-mounted kitchenette along one side of the shared room, a dining table near it, and a television against the opposite wall. Arrange two compact bedrooms and one small bathroom off the shared circulation, following space-efficient contemporary rooftop housing geometry. Give the living room one small exterior window. Give the daughter bedroom one exterior window with a single curtain run and place its bed along a side wall. Place the main bed against a wall in the main bedroom. Show the kitchen sink and faucet and a separate stovetop as simple top-down fixture glyphs. Show the bathroom washbasin and mirror as one compact fixture location. Outside, show one rooftop water tank and one stair landing connected to the entrance path. Doors must use a line and swing arc, windows must use double parallel wall lines, beds must be rectangles with pillow shapes, the dining table must be a simple rectangle, and the television must be a simple narrow rectangular glyph. Place exactly one small white circular marker with a black numeral at each base location numbered 1 through 23: 1 shared living and dining area, 2 kitchen zone, 3 main bedroom, 4 daughter bedroom, 5 bathroom, 6 entry threshold, 7 rooftop utility apron, 8 metal entrance door, 9 main bedroom door, 10 daughter bedroom door, 11 bathroom door, 12 living window, 13 daughter bedroom window, 14 sink and faucet, 15 stovetop, 16 dining table, 17 television, 18 main bed, 19 daughter bed, 20 daughter window curtain, 21 bathroom washbasin with mirror, 22 rooftop water tank, and 23 rooftop stair landing. Each numeral must appear exactly once at one contiguous location. Do not draw markers 24 through 40 and do not depict any blood, body, footprints, cups, photographs, red circles, facial distortion, fallen furniture, scattered objects, open-window state, rattling-door state, event cue, person, camera icon, field-of-view cone, or directional camera arrow.", "key_elements": [ "Compact single-level rooftop dwelling entered directly from an exterior roof apron", "Central shared living and dining area connected to a narrow wall-mounted kitchenette", "Two small private bedrooms opening from the shared area", "Compact bathroom close to the bedrooms and entry circulation", "Small living-room window and curtained daughter-bedroom window", "Metal exterior entrance door connected to the rooftop stair landing", "Persistent dining table, television, two beds, kitchen fixtures, and bathroom washbasin", "Exterior rooftop water tank positioned outside the dwelling footprint", "Flat pastel zoning with numbered base markers only; all blood, bodies, visions, cups, disorder, and opening states remain excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared living and dining area", "number": 1, "position_hint": "central and largest room inside the dwelling" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "compact kitchen zone", "number": 2, "position_hint": "along one side of the shared living area" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main bedroom", "number": 3, "position_hint": "private room on the quieter side of the dwelling" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "daughter bedroom", "number": 4, "position_hint": "private room adjoining the shared area and exterior wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "bathroom", "number": 5, "position_hint": "compact service room near the bedrooms" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry threshold", "number": 6, "position_hint": "inside the metal entrance door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rooftop utility apron", "number": 7, "position_hint": "outside the dwelling around the entrance side" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "metal entrance door", "number": 8, "position_hint": "exterior wall between the rooftop apron and entry threshold" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main bedroom door", "number": 9, "position_hint": "partition between the shared area and main bedroom" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "daughter bedroom door", "number": 10, "position_hint": "partition between the shared area and daughter bedroom" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bathroom door", "number": 11, "position_hint": "partition between the shared area circulation and bathroom" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "small living window", "number": 12, "position_hint": "exterior wall of the shared living area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "daughter bedroom window", "number": 13, "position_hint": "exterior wall of the daughter bedroom" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "kitchen sink and faucet", "number": 14, "position_hint": "counter run along the kitchen wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "kitchen stovetop", "number": 15, "position_hint": "same kitchen counter run, separated from the sink" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "dining table", "number": 16, "position_hint": "shared area beside the kitchen zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "television", "number": 17, "position_hint": "against a living-area wall visible from the kitchen and table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "main bed", "number": 18, "position_hint": "against the inner wall of the main bedroom" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "daughter bed", "number": 19, "position_hint": "along one wall of the daughter bedroom" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "daughter window curtain", "number": 20, "position_hint": "single curtain run directly inside the daughter bedroom window" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "bathroom washbasin with mirror", "number": 21, "position_hint": "one compact fixture location against the bathroom wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "rooftop water tank", "number": 22, "position_hint": "rooftop utility apron away from the entrance circulation" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rooftop stair landing", "number": 23, "position_hint": "outer edge of the rooftop apron leading toward the entrance door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "body behind bedroom curtain", "number": 24, "position_hint": "daughter bedroom floor directly behind the window curtain" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "pooled blood beside curtain", "number": 25, "position_hint": "single contiguous pool on the daughter bedroom floor near the body" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "bloody footprint trail", "number": 26, "position_hint": "single continuous trail across the daughter bedroom floor toward the curtain" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "red wrist mark", "number": 27, "position_hint": "one wrist of the body behind the curtain" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "red wall circle above daughter bed", "number": 28, "position_hint": "daughter bedroom wall adjacent to or above the bed" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "transient bathroom wall circle", "number": 29, "position_hint": "bathroom wall visible through or beside the mirror" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "melting face in family photograph", "number": 30, "position_hint": "single framed photograph position on the dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "bloodstained photograph pinned inside wall circle", "number": 31, "position_hint": "one contiguous display point on the daughter bedroom wall" }, { "base_layer_decision": "state_overlay_transient_object", "category": "furniture", "label": "overturned west dining chair", "number": 32, "position_hint": "west side of the dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "furniture", "label": "overturned east dining chair", "number": 33, "position_hint": "east side of the dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "searched household-item pile", "number": 34, "position_hint": "single compact pile beside the dining table" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "intruder footprint trail", "number": 35, "position_hint": "single continuous trail between the entry and living window" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "open living window state", "number": 36, "position_hint": "at the small living window" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "rattling ajar entrance door state", "number": 37, "position_hint": "at the metal entrance door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "upright tea cup", "number": 38, "position_hint": "one side of the dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "overturned tea cup", "number": 39, "position_hint": "opposite side of the dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "crumpled old photograph in hand", "number": 40, "position_hint": "in one hand of the body behind the curtain" } ], "camera_recommendations": [ { "bg_id": "L05B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 6 (entry threshold), facing diagonally across number 1 (shared living and dining area) toward number 2 (kitchen zone) and number 12 (small living window)", "framing_notes": "Keep number 16 (dining table), number 17 (television), number 14 (sink), and number 15 (stovetop) readable within one compact domestic frame.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ], "lens_hint": "28mm moderate wide angle", "sub_location": "shared_living_kitchen", "use_numbered_elements": [ 1, 2, 6, 8, 9, 10, 11, 12, 14, 15, 16, 17 ] }, { "bg_id": "L05B06", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 16 (dining table), facing through number 10 (daughter bedroom door) toward number 20 (window curtain), with number 19 (daughter bed) along the side wall", "framing_notes": "Use a deep doorway composition so the two cups remain in the near shared area while the bedroom blood pool, footprint trail, body behind the curtain, wrist mark, wall circle, and crumpled photograph occupy distinct contiguous positions.", "ignore_numbered_elements": [ 29, 30, 31, 32, 33, 34, 35, 36, 37 ], "lens_hint": "28mm wide angle", "sub_location": "daughter_bedroom_from_living_area", "use_numbered_elements": [ 1, 4, 10, 13, 16, 19, 20, 24, 25, 26, 27, 28, 38, 39, 40 ] }, { "bg_id": "L05B07", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 16 (dining table), facing through number 10 (daughter bedroom door) toward number 19 (daughter bed) and number 20 (window curtain)", "framing_notes": "Present the shared area and bedroom as excessively clean and orderly; all listed transient evidence is explicitly absent.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ], "lens_hint": "28mm moderate wide angle", "sub_location": "spotless_living_to_daughter_bedroom", "use_numbered_elements": [ 1, 4, 10, 13, 16, 19, 20 ] }, { "bg_id": "L05B03", "camera_height": "eye-level seated, approximately 1.2 m", "camera_position": "near number 9 (main bedroom door), facing diagonally toward number 18 (main bed)", "framing_notes": "Emphasize the quiet bed and the compact, unoccupied room after an overnight vigil.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ], "lens_hint": "35mm natural wide angle", "sub_location": "main_bedroom", "use_numbered_elements": [ 3, 9, 18 ] }, { "bg_id": "L05B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "within number 1 (shared living and dining area), facing number 11 (bathroom door) and number 21 (washbasin with mirror), while keeping number 16 (dining table) in the near side of the composition", "framing_notes": "Arrange the sightline so the transient bathroom wall circle and the distorted family photograph on the dining table remain separate observer-dependent cues.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ], "lens_hint": "24mm wide angle", "sub_location": "living_area_to_bathroom", "use_numbered_elements": [ 1, 5, 11, 16, 21, 29, 30 ] }, { "bg_id": "L05B04", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just inside number 10 (daughter bedroom door), facing number 19 (daughter bed) and the adjacent wall near number 20 (window curtain)", "framing_notes": "Give the bloodstained photograph pinned within the red wall circle a clear contiguous wall position above or beside the bed.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36, 37, 38, 39, 40 ], "lens_hint": "35mm moderate wide angle", "sub_location": "daughter_bedroom_wall", "use_numbered_elements": [ 4, 10, 13, 19, 20, 31 ] }, { "bg_id": "L05B05", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 10 (daughter bedroom door), facing diagonally across number 1 (shared living and dining area) toward number 12 (living window) and number 8 (metal entrance door)", "framing_notes": "Include both overturned chairs around number 16, one compact pile of searched household items, the footprint trail, the open-window state, and the rattling partially ajar entrance-door state.", "ignore_numbered_elements": [ 24, 25, 26, 27, 28, 29, 30, 31, 38, 39, 40 ], "lens_hint": "24mm wide angle", "sub_location": "disordered_shared_area", "use_numbered_elements": [ 1, 4, 6, 8, 10, 12, 16, 17, 32, 33, 34, 35, 36, 37 ] } ], "scale_guideline": "The depicted rooftop dwelling is a single-storey rooftop addition, with a typical interior height of roughly 2.4–2.8 m because the text does not specify a measurement. Its footprint should read as a compact urban household unit, typically about 30–50 square metres, placed on an older low-rise multi-family building whose full storey count is not specified. The plan conservatively includes two evidenced exterior windows and one exterior metal door; the rooftop water tank rises above the roof surface as a separate utility element, while the stair landing connects down through the underlying building.", "applied_shots": [ "S5_Shot2", "S5_Shot8", "S5_Shot9", "S12_Shot6", "S12_Shot11", "S14_Shot4", "S14_Shot8", "S18_Shot1", "S18_Shot12", "S18_Shot16", "S25_Shot4", "S25_Shot6", "S25_Shot8", "S27_Shot1", "S27_Shot3" ], "group_id": "bg_rooftop_villa", "depends_on_fp": [] }, "fp_l13_external_stairs": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of an exterior stair route connecting the rear approach of a compact low-rise multifamily building to a rooftop room. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric plan symbols only, and minimal text. Show a practical modern Korean urban-villa layout: a compact lower approach landing, a straight lower exterior stair flight, a rectangular intermediate turning landing, a parallel upper stair flight forming a switchback ascent, and an upper rooftop landing beside a metal rooftop-room entrance door. Show stair treads as evenly spaced parallel lines, the door as a standard line-and-swing-arc plan symbol, one contiguous outer guardrail run along the exposed stair edge, one contiguous rooftop parapet edge, and a simple circular or rectangular rooftop water-tank symbol set away from the landing. Apply single flat pastel solid fills consistently: lower threshold zone pale beige, stair circulation zone pale blue-gray, intermediate landing zone pale muted yellow, and rooftop utility zone pale gray. Area labels may appear only as the generic text Threshold Zone, Stair Zone, Landing Zone, and Rooftop Utility Zone. Add small white circles with black numbers exactly once for base elements 1 through 9: 1 lower approach landing, 2 lower stair flight, 3 intermediate turning landing, 4 upper stair flight, 5 rooftop landing, 6 rooftop-room metal entrance door, 7 outer stair guardrail run, 8 rooftop parapet edge, 9 rooftop water tank. Do not draw marker 10 or any half-open door state because it belongs to the transient overlay. Include a small north arrow in one corner. Do not include people, bicycles, odor cues, motion cues, urgency symbols, camera icons, field-of-view cones, or event annotations. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, or material rendering.", "key_elements": [ "Compact lower approach threshold at the rear of a contemporary low-rise multifamily building", "Two exterior stair flights arranged as a practical switchback ascent", "Intermediate turning landing between the stair flights", "Upper landing opening onto the rooftop utility area", "Metal entrance door into the rooftop room", "Continuous outer stair guardrail and rooftop parapet edge", "Rooftop water tank as a persistent destination anchor", "Moment-specific half-open entrance-door state reserved for the overlay layer" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "lower approach landing", "number": 1, "position_hint": "south edge of plan at the base of the exterior stair" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "lower stair flight", "number": 2, "position_hint": "southwest to north along the first part of the switchback ascent" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "intermediate turning landing", "number": 3, "position_hint": "north end of the lower stair flight" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "upper stair flight", "number": 4, "position_hint": "parallel to the lower flight, ascending southward from the intermediate landing" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rooftop landing", "number": 5, "position_hint": "south end of the upper flight beside the rooftop-room entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rooftop-room metal entrance door", "number": 6, "position_hint": "east wall of the rooftop landing" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "outer stair guardrail run", "number": 7, "position_hint": "west outer edge of the switchback stair assembly" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rooftop parapet edge", "number": 8, "position_hint": "north edge of the rooftop utility area beyond the stair landing" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "rooftop water tank", "number": 9, "position_hint": "northeast portion of the rooftop utility area, clear of the landing" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "half-open entrance-door state", "number": 10, "position_hint": "at number 6 on the rooftop-room entrance threshold" } ], "camera_recommendations": [ { "bg_id": "L13B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "on number 4 (upper stair flight), looking upward toward number 5 (rooftop landing) and number 6 (rooftop-room metal entrance door), with number 7 (outer guardrail run) along the near side", "framing_notes": "Emphasize the steep urgent route toward the rooftop entrance; include the upper parapet and water tank as destination anchors, and depict number 10 as the moment-specific half-open state of the otherwise persistent door.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "rooftop_external_stairs", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] } ], "scale_guideline": "The main structure is likely three to four storeys with a partial rooftop-room level, typical for an older low-rise multifamily villa in a contemporary Korean coastal city; the exact storey count is not specified. Use a compact urban residential footprint, with the exterior stair system extending vertically from the courtyard approach to the full roof level rather than reading as one short domestic stair. One metal rooftop-room entrance door is directly established, and at least one rooftop-room window exists, although the facade-wide opening count is not specified. Guardrails and the rooftop parapet should reach normal protective height, while the water tank stands above the roof surface as a distinct utility element.", "applied_shots": [ "S11_Shot2" ], "group_id": "bg_rooftop_villa", "depends_on_fp": [] }, "fp_l09_market_store": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a contemporary urban supermarket in a mid-2020s coastal Korean city. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only, and minimal text. The plan is a broad rectangular single-level retail unit: a recessed entrance threshold on the south side leads through centered automatic sliding glass doors into a large retail floor; separate continuous storefront glazing runs sit west and east of the doors. Place two checkout counters near the south exit route, three distinct parallel gondola shelf runs across the center with broad customer aisles between them, one continuous perimeter shelf run along the west wall, one continuous perimeter shelf run along the east wall, and a rear restocking service zone along the north side. Use simple top-down symbolic glyphs: shelving as narrow outlined rectangles with internal divider lines, checkout counters as simple block forms, sliding doors as paired parallel door panels, and storefront windows as double parallel wall lines. Apply one consistent flat pastel solid fill per area: Retail Floor shared zone in pale yellow, Entrance Threshold in pale beige, and Restocking Service Zone in pale cyan. Generic zone names may appear as larger text only: Retail Floor, Entrance Threshold, Restocking Service Zone. Draw one small circular marker with a black number exactly once at each base element: 1 retail floor, 2 entrance threshold, 3 sliding entrance doors, 4 west storefront glazing, 5 east storefront glazing, 6 west perimeter shelving, 7 west central shelf run, 8 middle central shelf run, 9 east central shelf run, 10 east perimeter shelving, 11 west checkout counter, 12 east checkout counter, and 13 restocking service zone. Do not draw number 14 or any stocking carton because it is a transient scene-overlay object. Do not draw people, employees, bicycles, products, loose cartons, event cues, camera icons, view cones, arrows, legends, descriptive annotations, or other text. A small north arrow marked N may appear in one corner. Strictly flat 2D only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering.", "key_elements": [ "Modern urban supermarket retail floor with broad circulation aisles", "Recessed entrance threshold with automatic sliding glass doors", "Continuous glazed storefront beside the entrance", "Three separate central gondola shelf runs", "Two separate perimeter shelving runs", "Two checkout counters near the exit route", "Rear service and restocking zone", "Temporary stocking carton reserved for the scene overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "retail floor", "number": 1, "position_hint": "large central shared zone occupying most of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 2, "position_hint": "south facade, centered before the retail floor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "sliding entrance doors", "number": 3, "position_hint": "center of south wall between the threshold and retail floor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west storefront glazing", "number": 4, "position_hint": "south wall, west side of the entrance doors" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east storefront glazing", "number": 5, "position_hint": "south wall, east side of the entrance doors" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west perimeter shelving", "number": 6, "position_hint": "single continuous shelf run against the west wall of the retail floor" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west central shelf run", "number": 7, "position_hint": "central retail floor, west of the main circulation aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "middle central shelf run", "number": 8, "position_hint": "center of the retail floor, parallel to number 7" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "east central shelf run", "number": 9, "position_hint": "central retail floor, east of number 8" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "east perimeter shelving", "number": 10, "position_hint": "single continuous shelf run against the east wall of the retail floor" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west checkout counter", "number": 11, "position_hint": "southwest portion of the retail floor near the exit path" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "east checkout counter", "number": 12, "position_hint": "south-central portion of the retail floor beside number 11" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "restocking service zone", "number": 13, "position_hint": "rear north side of the store behind the main shelf runs" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "stocking carton", "number": 14, "position_hint": "temporarily placed beside the east central shelf run during active restocking" } ], "camera_recommendations": [ { "bg_id": "L09B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just inside number 3 (sliding entrance doors), facing diagonally across number 1 (retail floor) toward numbers 7, 8, and 9 (central shelf runs), with numbers 11 and 12 (checkout counters) along one side", "framing_notes": "Show the entrance threshold in the near foreground, long shelving aisles receding across the frame, employees stocking near the temporary carton at number 14, and clear search sightlines through the retail floor.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "market_store", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] } ], "scale_guideline": "Treat the market as a single-storey contemporary retail unit, typical for a neighborhood supermarket; the exact building height is not specified. Use a broad rectangular footprint large enough for three central gondola runs, perimeter shelving, checkout circulation, and a rear restocking zone, typically with a clear interior height around 3–4 m. The customer facade has one central automatic sliding-door opening and two separate glazed storefront runs, one on each side; no additional facade-opening count is established.", "applied_shots": [ "S8_Shot2" ], "group_id": "bg_large_market", "depends_on_fp": [] }, "fp_l10_market_entrance": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan of a contemporary large supermarket entrance in a coastal urban district. Show only the entrance frontage, enclosed threshold vestibule, immediate commercial interior edge, covered exterior apron, bicycle approach lane, fixed bicycle rack, shallow awning footprint, storefront glazing, automatic doors, and fixed security-camera mounting position. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols, and generous spacing for immediate readability. Use one consistent flat pastel solid fill per distinct zone: pale yellow for the shared commercial interior, pale cyan for the enclosed vestibule, pale beige for the covered entrance apron beneath the awning, pale gray for the surrounding exterior forecourt, and pale green for the bicycle approach lane. No gradients, blending, or drop shadows. Place the building along the north side and the open forecourt along the south side. At the center of the facade, show a typical contemporary supermarket entrance sequence: outer automatic sliding door number 5, compact vestibule number 6, and inner automatic sliding door number 7. Draw each sliding-door assembly as one contiguous opening with parallel sliding panels. Show commercial interior zone number 12 north of the vestibule. Show west storefront window run number 9 and east storefront window run number 10 as separate double parallel lines in the facade wall. Outside, show covered entrance apron number 1 centered before the doors. Show bicycle approach lane number 2 entering from the southwest and ending beside fixed bicycle rack number 3 on the west side of the apron. Outline one shallow rectangular awning number 4 over the central apron without obscuring the plan below. Show fixed security camera number 8 as a tiny top-down wall-mounted surveillance-camera glyph beneath the east side of the awning beside the outer door, aimed diagonally across the apron; do not draw a coverage cone. Reflect contemporary regional commercial geometry through broad glazing, a sheltered entrance, automatic sliding doors, and practical bicycle access, while keeping the image purely schematic. Add one small circle containing a unique black number exactly once for each base element numbered 1 through 10 and 12. Number 11 is a transient parked bicycle reserved for a separate state overlay: do not draw the bicycle or marker 11 anywhere on this floor plan. Optional larger generic area labels are limited to Shared Zone, Threshold Zone, and Exterior Zone. A small north arrow may appear in one corner. No legend, object names, annotations, people, vehicles, event cues, camera-position icons, field-of-view arrows, or other text inside the drawing. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Covered exterior entrance apron", "Dedicated bicycle approach lane", "Fixed bicycle parking rack", "Shallow rectangular entrance awning", "Outer automatic sliding-door assembly", "Enclosed threshold vestibule", "Inner automatic sliding-door assembly", "Wall-mounted security camera beneath the awning", "Two separate storefront window runs", "Large shared commercial interior zone", "Temporarily parked bicycle reserved for the state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "covered entrance apron", "number": 1, "position_hint": "center of the exterior frontage, directly outside the outer sliding door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "bicycle approach lane", "number": 2, "position_hint": "southwest side of the exterior forecourt, leading toward the entrance apron" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "bicycle parking rack", "number": 3, "position_hint": "west edge of the covered entrance apron beside the approach lane" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "entrance awning", "number": 4, "position_hint": "single shallow rectangular canopy footprint above the central covered apron" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "outer sliding door", "number": 5, "position_hint": "center of the exterior facade between the two storefront window runs" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance vestibule", "number": 6, "position_hint": "immediately north of the outer sliding door and south of the inner sliding door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "inner sliding door", "number": 7, "position_hint": "north side of the entrance vestibule, opening into the commercial interior" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "security camera", "number": 8, "position_hint": "east side beneath the awning, mounted beside the outer sliding door and aimed across the apron" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west storefront window", "number": 9, "position_hint": "single contiguous glazed run in the exterior facade west of the outer sliding door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east storefront window", "number": 10, "position_hint": "single contiguous glazed run in the exterior facade east of the outer sliding door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "parked bicycle", "number": 11, "position_hint": "temporarily parked beside the bicycle rack on the west side of the apron" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "commercial interior zone", "number": 12, "position_hint": "north of the entrance vestibule within the supermarket frontage" } ], "camera_recommendations": [ { "bg_id": "L10B02", "camera_height": "eye-level standing ~1.6m, tilted slightly upward enough to include the wall-mounted security camera", "camera_position": "near number 2 (bicycle approach lane), facing diagonally across number 1 (covered entrance apron) toward number 5 (outer sliding door) and number 8 (security camera)", "framing_notes": "Keep number 8 clearly visible beneath the awning and spatially aligned with the entrance apron. Include number 11 as a parked bicycle near number 3, while retaining the entrance doors and part of both storefront window runs for location context.", "ignore_numbered_elements": [], "lens_hint": "28mm moderate wide angle", "sub_location": "market_entrance", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ] } ], "scale_guideline": "The full supermarket is a large commercial structure, but this plan covers only one frontage entrance bay and its immediate exterior apron rather than the entire footprint. A contemporary large-market building in this regional setting is typically one to three storeys, with a comparatively tall commercial ground floor around 4–5 m; the exact storey count and height are not specified. Treat the awning as a shallow single-level canopy above the entrance, with the security camera mounted beneath it and no vertical element extending above the main facade.", "applied_shots": [ "S19_Shot4" ], "group_id": "bg_large_market", "depends_on_fp": [] }, "fp_l11_admin_office": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of a compact contemporary administrative security office inside a large retail facility. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols only, and a restrained modern back-of-house layout typical of a mid-2020s urban commercial facility. Divide the rectangular office into three clearly bounded functional areas with consistent solid pastel fills: number 1, a pale yellow central shared work and standing-viewing zone; number 2, a pale cyan narrow equipment service strip along the north wall; and number 3, a pale beige threshold zone at the southwest entrance. Place number 4 on one inward-swinging staff door in the south wall near the southwest corner, drawn with a standard door leaf and swing arc. Place number 5 on a simple rectangular CCTV workstation desk along the north-central side, facing the north wall. Place number 6 on one top-down office-chair glyph directly south of the desk, leaving clear standing room behind it for observers. Place number 7 once at the center of a single contiguous bank of several modern CCTV monitors arranged on the desk. Place number 8 once on a compact built-in recording equipment cabinet in the northeast corner. Draw every base element as a simple symbolic top-down glyph and place exactly one small white circle with a black number for each number 1 through 8. Do not draw number 9 or any dark playback image, blur, people, event cue, camera icon, field-of-view cone, or shot arrow; number 9 is a transient screen-state overlay reserved for the downstream background. Minimal text inside the diagram: only the generic area labels Shared Zone, Service Zone, and Threshold Zone may appear in larger plain lettering, plus an optional small north arrow. No other labels, legends, annotations, or prose inside the plan. Strictly flat 2D CAD-like plan only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered lighting, no lighting effects, no textured surfaces, and no material rendering. Use only solid pastel area fills with no blending or drop shadows.", "key_elements": [ "Compact contemporary administrative security office", "Open shared work and standing-viewing zone", "Narrow equipment service strip", "Single inward-swinging staff entrance", "CCTV workstation desk with contiguous monitor bank", "Operator chair facing the monitors", "Built-in recording equipment cabinet", "Unusually dark and blurred CCTV playback treated only as a transient screen-state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Work and viewing zone", "number": 1, "position_hint": "central and western portion of the office" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Equipment service zone", "number": 2, "position_hint": "narrow strip along the north wall behind the workstation" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Threshold zone", "number": 3, "position_hint": "southwest corner immediately inside the entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Staff entrance door", "number": 4, "position_hint": "south wall near the southwest corner, swinging inward" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "CCTV workstation desk", "number": 5, "position_hint": "north-central side of the work zone, facing the north wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Operator chair", "number": 6, "position_hint": "directly south of the workstation desk" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "CCTV monitor bank", "number": 7, "position_hint": "single contiguous monitor array centered on the workstation desk" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Recording equipment cabinet", "number": 8, "position_hint": "northeast corner within the equipment service zone" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Dark blurred CCTV playback", "number": 9, "position_hint": "confined to the display surface of the CCTV monitor bank" } ], "camera_recommendations": [ { "bg_id": "L11B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 3 (threshold zone), facing diagonally across number 1 (work and viewing zone) toward number 5 (CCTV workstation desk), number 6 (operator chair), and number 7 (monitor bank)", "framing_notes": "Keep the monitor bank prominent while preserving open standing space behind the operator chair for two observers. The monitor display should depict number 9 as unusually dark, blurred, low-resolution playback without revealing identifiable details.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "admin_security_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "Treat this as a single-level interior office compartment within a larger retail facility; the larger building's storey count is not specified. A compact footprint of roughly 15–25 square metres and a ceiling height around 2.4–2.8 metres are typical for a contemporary back-of-house security office of this kind. The plan uses a typical single staff entrance, while exterior windows and vertical circulation are not established and should not be inferred.", "applied_shots": [ "S20_Shot3" ], "group_id": "bg_large_market", "depends_on_fp": [] }, "fp_l14_police_office": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2020s South Korean urban police team office. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, simple geometric room boundaries, and conventional top-down furniture and opening glyphs only. The plan contains a main shared work zone in flat pale yellow, a central circulation aisle in flat pale green, an entry threshold zone in flat pale beige, a small coffee service alcove in flat pale cyan, and a narrow filing-storage strip in flat pale gray. Use each flat pastel color consistently, with sharp boundaries and no blending. Arrange a glazed entry door in the south wall, opening into the threshold and a clear central aisle; place one internal corridor doorway on the west wall and one contiguous double-line exterior window run on the north wall. Put two separate rectangular workstations across the northern half: a senior officer desk at northwest with one top-down desk chair, and a detective workstation at northeast with one monitor glyph. Add one fixed coffee counter in the southwest service alcove and one contiguous filing cabinet bank along the east wall. Show doors with line-and-arc swing symbols, the window as double parallel wall lines, desks as plain rectangles, the chair as a simple plan symbol, and the monitor as a small thin rectangle. Place small circular markers with black numbers exactly once for base elements 1 through 13 at their single specified locations. Do not draw markers 14, 15, 16, or 17 and do not depict their transient photographs, screen result, handheld phone, or note. Minimal text is allowed only for the generic area labels Shared Work Zone, Circulation Zone, Threshold Zone, Service Zone, and Storage Zone, plus a small north arrow marked N. No other labels or annotations. Strictly no 3D, isometric, perspective, axonometric projection, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, material rendering, decorative illustration, camera icons, field-of-view cones, or event-state graphics.", "key_elements": [ "Compact mid-2020s urban police team office", "Shared desk area with two distinct workstations", "Central circulation aisle leading to a glazed entrance", "Detective monitor used for contemporary location-data work", "Senior officer desk and persistent desk chair", "Small coffee service alcove and filing storage", "Flat pastel zoning with unique numbered base markers", "Transient photographs, screen data, phone, and handwritten note excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared work zone", "number": 1, "position_hint": "main central and north portion of the office" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "circulation aisle", "number": 2, "position_hint": "clear central route between the entry threshold and desk cluster" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry threshold zone", "number": 3, "position_hint": "south side immediately inside the glass entry door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "coffee service alcove", "number": 4, "position_hint": "southwest corner beside the circulation aisle" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "glass entry door", "number": 5, "position_hint": "south wall at the end of the central circulation aisle" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "internal corridor doorway", "number": 6, "position_hint": "west wall near the north end of the circulation aisle" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window run", "number": 7, "position_hint": "single contiguous run along the north wall behind the desks" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "detective workstation desk", "number": 8, "position_hint": "northeast side of the shared work zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "workstation monitor", "number": 9, "position_hint": "centered on the north edge of the detective workstation desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "senior officer desk", "number": 10, "position_hint": "northwest side of the shared work zone, separated from number 8 by the aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "senior desk chair", "number": 11, "position_hint": "south side of the senior officer desk facing north" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "coffee counter", "number": 12, "position_hint": "against the west wall inside the coffee service alcove" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "filing cabinet bank", "number": 13, "position_hint": "single contiguous cabinet run along the east wall" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "exposed investigation photographs", "number": 14, "position_hint": "one contiguous spread across the top of the senior officer desk" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "location result on monitor", "number": 15, "position_hint": "confined to the screen surface of the workstation monitor" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "phone displaying stored number", "number": 16, "position_hint": "near the detective workstation during the night-duty interaction" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "handwritten coordinate note", "number": 17, "position_hint": "at the near edge of the senior officer desk before being removed" } ], "camera_recommendations": [ { "bg_id": "L14B03", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 5 (glass entry door), facing diagonally across number 2 (circulation aisle) toward number 8 (detective workstation desk), number 9 (workstation monitor), and number 10 (senior officer desk)", "framing_notes": "Keep the sparsely occupied night office open around the desks, with number 16 visible near the workstation interaction area.", "ignore_numbered_elements": [ 14, 15, 17 ], "lens_hint": "35mm wide angle", "sub_location": "night_duty_work_area", "use_numbered_elements": [ 1, 2, 5, 8, 9, 10, 11, 16 ] }, { "bg_id": "L14B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "inside number 1 (shared work zone), looking diagonally from the entry side toward number 10 (senior officer desk) and number 8 (detective workstation desk) with number 9 (workstation monitor) in clear view", "framing_notes": "Feature number 14 across the senior officer desk, number 15 on the monitor, and number 17 at the desk edge while preserving visible empty circulation space.", "ignore_numbered_elements": [ 16 ], "lens_hint": "32mm moderate wide angle", "sub_location": "daytime_empty_work_area", "use_numbered_elements": [ 1, 2, 5, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17 ] }, { "bg_id": "L14B02", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "just outside number 5 (glass entry door), looking through number 3 (threshold zone) along number 2 (circulation aisle) toward number 10 (senior officer desk) and number 8 (detective workstation desk)", "framing_notes": "Make the glass-door threshold dominant, retain a readable route out of the office, and keep transient desk and screen information out of view.", "ignore_numbered_elements": [ 14, 15, 16, 17 ], "lens_hint": "28mm wide angle", "sub_location": "glass_entry_threshold", "use_numbered_elements": [ 1, 2, 3, 5, 8, 9, 10, 11 ] } ], "scale_guideline": "The plan represents one office suite on a single level; the total storey count of the containing police building is not specified. A compact footprint around 8–12 m by 6–9 m and a 2.7–3.2 m floor-to-ceiling height are typical conservative ranges for this mid-2020s urban office type, not measurements stated in the text. At this level, the suite has one glazed entrance, one internal corridor doorway, and one contiguous exterior window run; there are no stairs or other multi-storey vertical elements within the plan scope.", "applied_shots": [ "S16_Shot3", "S21_Shot3", "S21_Shot6", "S21_Shot9" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l15_station_road": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan diagram of a compact contemporary coastal-city civic station roadside frontage. Show the station building as a simple rectangular footprint across the north half, aligned close to the street in a practical mid-2020s urban layout. Place a small frontage apron along its south side, a single main entrance door with a standard plan-view swing arc slightly west of center, and one contiguous front window run east of the door shown as double parallel lines in the wall. Add a dedicated bicycle parking bay at the east side of the apron with one simple fixed rack glyph. Place a continuous pedestrian sidewalk south of the apron and a plain roadway parallel to it along the south edge, creating a clear physical route from the bicycle bay to the road without arrows or motion graphics. Use single-weight black outlines on a white or off-white background and geometric plan symbols only. Apply one consistent flat pastel solid fill to each area: station shared zone pale yellow, frontage threshold zone pale beige, bicycle utility zone pale cyan, pedestrian zone pale green, and roadway exterior zone pale gray. Draw small circles containing unique black numbers exactly once for base elements 1 through 8 at their specified contiguous locations. Do not draw number 9 or the bicycle because it is a transient overlay object. Allow only short generic area labels such as Shared Zone, Threshold Zone, Utility Zone, Pedestrian Zone, and Exterior Zone, plus an optional small north arrow; include no other words or annotations. Do not draw people, departure trails, motion lines, camera icons, field-of-view cones, or event-state cues. Strictly forbid 3D, isometric, perspective, axonometric, depth effects, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, and material rendering.", "key_elements": [ "Compact civic station footprint aligned close to the street", "Main front entrance opening onto a small frontage apron", "Single contiguous front window run", "Dedicated bicycle parking bay beside the entrance", "Fixed bicycle rack", "Pedestrian sidewalk between the frontage and road", "Roadway providing the departure route", "Transient bicycle at the departure point, excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "station building footprint", "number": 1, "position_hint": "north half of plan, centered behind the street frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "frontage apron", "number": 2, "position_hint": "south side of building, directly outside the main entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main entrance door", "number": 3, "position_hint": "south wall of building, slightly west of center" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front window run", "number": 4, "position_hint": "south wall of building, east of the main entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "bicycle parking bay", "number": 5, "position_hint": "east side of frontage apron beside the building" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "fixed bicycle rack", "number": 6, "position_hint": "center of the bicycle parking bay" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "pedestrian sidewalk", "number": 7, "position_hint": "continuous east-west strip along the south edge of the frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "roadway", "number": 8, "position_hint": "south side of plan, parallel to the sidewalk" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "bicycle at departure point", "number": 9, "position_hint": "at the outer edge of the bicycle parking bay, oriented toward the sidewalk and roadway" } ], "camera_recommendations": [ { "bg_id": "L15B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 2 (frontage apron), facing diagonally toward number 5 (bicycle parking bay), number 6 (bicycle rack), and number 8 (roadway)", "framing_notes": "Keep number 3 and the station frontage in the rear background, place number 9 at the transition from the bicycle bay toward the roadway, and preserve a clear departure route through number 7 without drawing route arrows.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "station_road", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "The main station is a compact civic building likely two to three storeys tall, typical for this contemporary urban building type; the text does not specify its storey count. A typical storey would be about 3–4 m high, giving an overall building height in the approximate 7–12 m range, while the footprint should read as tens of meters across rather than as a large campus. The front facade opening count is not specified; this plan establishes one main entrance and one representative contiguous front window run, with no notable multi-storey exterior vertical element required.", "applied_shots": [ "S22_Shot1" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l18_deck": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a small mid-2020s western coastal fishing-boat deck. Show a tapered boat perimeter with a broad open working deck in the aft half, a compact enclosed wheelhouse centered in the forward half, narrow exterior passages along both sides of the wheelhouse, and an aft-facing wheelhouse doorway with a clearly defined threshold. Inside the wheelhouse, show a simple top-down helm-console glyph against the forward wall. Draw one continuous front windshield run and one side window on each side wall using double parallel window lines. Draw separate simple safety-railing runs along the stern, port edge, and starboard edge. Use practical compact geometry typical of a contemporary small working fishing vessel, with the wheelhouse forward and the unobstructed work deck aft. Fill the open working deck with flat pale yellow, the wheelhouse control area with flat pale blue, the doorway threshold with flat pale beige, and both utility side passages with flat pale gray; use solid pastel fills only, consistently by zone. Use single-weight black outlines on a white or off-white background and geometric architectural-plan symbols only. The door must be shown as a line with a swing arc, windows as double parallel wall lines, and the helm console as a plain top-down rectangle with a small wheel symbol. Place exactly one small circular black-number marker for each base element numbered 1 through 13, each at its single unambiguous location. Do not draw markers 14 or 15 because the photograph and map are transient overlay objects. Minimal interior text only: Shared Zone, Control Zone, Threshold Zone, and Utility Zone; optionally include a small north arrow in one corner. Do not include any other labels, annotations, camera icons, field-of-view cones, people, photograph, map, confrontation action, or supernatural marks. No 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, or material rendering. The result must look like a clean simple architectural CAD plan or room-layout sketch, never an artistic render.", "key_elements": [ "Open aft working deck", "Compact forward wheelhouse", "Aft-facing wheelhouse doorway and threshold", "Helm console inside wheelhouse", "Front and side wheelhouse windows", "Narrow exterior side passages", "Port, starboard, and stern safety railings", "Transient printed photograph and folded map excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "open working deck", "number": 1, "position_hint": "broad aft half of the boat behind the wheelhouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "wheelhouse control area", "number": 2, "position_hint": "compact enclosed area centered in the forward half of the deck" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "doorway threshold", "number": 3, "position_hint": "center of the aft wall of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "wheelhouse door", "number": 4, "position_hint": "aft-facing wheelhouse doorway above the threshold" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "helm console", "number": 5, "position_hint": "inside wheelhouse against the forward wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front windshield run", "number": 6, "position_hint": "single contiguous window run in the forward wheelhouse wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "port side window", "number": 7, "position_hint": "single window in the port wall of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "starboard side window", "number": 8, "position_hint": "single window in the starboard wall of the wheelhouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "port side passage", "number": 9, "position_hint": "narrow exterior passage along the port side of the wheelhouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "starboard side passage", "number": 10, "position_hint": "narrow exterior passage along the starboard side of the wheelhouse" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "stern safety railing", "number": 11, "position_hint": "single contiguous railing run across the aft edge of the open deck" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "port safety railing", "number": 12, "position_hint": "single contiguous railing run along the port edge of the open deck" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "starboard safety railing", "number": 13, "position_hint": "single contiguous railing run along the starboard edge of the open deck" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "printed photograph", "number": 14, "position_hint": "held above the open working deck during the photograph confrontation" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "folded map", "number": 15, "position_hint": "held or set down at one spot on the open working deck during the confrontation" } ], "camera_recommendations": [ { "bg_id": "L18B02", "camera_height": "eye-level standing ~1.6m", "camera_position": "on number 1 (open working deck), near number 11 (stern railing), facing diagonally forward toward number 3 (doorway threshold) and number 4 (wheelhouse door)", "framing_notes": "Keep the open deck broad enough for two confronting figures; include number 14 (printed photograph) prominently and number 15 (folded map) as a secondary handheld or nearby transient object.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "fishing_boat_deck", "use_numbered_elements": [ 1, 2, 3, 4, 9, 10, 11, 12, 13, 14, 15 ] }, { "bg_id": "L18B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 3 (doorway threshold) on number 1 (open working deck), facing through number 4 (wheelhouse door) toward number 5 (helm console)", "framing_notes": "Emphasize the narrow threshold where entry can be physically blocked; retain part of the exterior deck and wheelhouse interior in the same frame.", "ignore_numbered_elements": [ 14, 15 ], "lens_hint": "28mm wide angle", "sub_location": "wheelhouse_doorway", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] } ], "scale_guideline": "This is a single-main-deck small coastal fishing boat with a compact one-level wheelhouse; a wheelhouse interior height of roughly 2.1–2.5 meters is typical, but the text gives no measurement. A footprint around 10–20 meters long and 3–5 meters in beam is typical for this general small-boat class; exact dimensions are unspecified. The schematic assumes one aft-facing wheelhouse door and three contiguous window runs—front, port, and starboard—with no multi-storey stair or other major vertical element.", "applied_shots": [ "S28_Shot5", "S28_Shot9" ], "group_id": "bg_small_fishing_boat", "depends_on_fp": [] }, "fp_l19_wheelhouse": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a cramped enclosed wheelhouse on a small contemporary fishing vessel. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, simple geometric symbols, and minimal text. The compact rectangular enclosure has a forward control zone filled solid pale cyan, a narrow central circulation zone filled solid pale yellow, and an aft threshold zone filled solid pale beige; keep every fill perfectly flat and consistent, with no gradients or blending. Place a centered inward-swinging doorway in the aft wall, a single broad windshield run in the forward wall, one separate window run in the forward portion of the port wall, and one separate window run in the forward portion of the starboard wall. Put a compact rectangular helm console directly below the forward windshield, with distinct top-down symbols for a steering wheel, instrument display, and throttle control; place one simple operator chair immediately aft of the console, facing forward. Show door swing arcs and windows as double parallel wall lines. Add small circular markers with black numbers 1 through 12, each number appearing exactly once at its corresponding single contiguous location: 1 control zone, 2 central circulation area, 3 aft threshold zone, 4 aft doorway, 5 forward windshield, 6 port side window, 7 starboard side window, 8 helm console, 9 steering wheel, 10 instrument display, 11 throttle control, 12 operator chair. Only the generic area labels Control Zone, Circulation Zone, and Threshold Zone may appear, plus an optional small north arrow. Do not draw marker 13, marker 14, circular marks, a photograph, people, event cues, camera icons, view cones, or shot arrows because those belong to transient overlays. Strictly exclude 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, decorative illustration, and furniture shown in perspective.", "key_elements": [ "Cramped enclosed wheelhouse on a small modern fishing vessel", "Forward control zone with compact helm console", "Narrow central circulation aisle", "Single aft access doorway and threshold", "Broad forward windshield with separate port and starboard side windows", "Fixed steering wheel, instrument display, and throttle control", "Single operator chair facing forward", "Transient contiguous cluster of circular marks on the forward starboard bulkhead", "Transient hand-held photograph evidence near the central aisle" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "control zone", "number": 1, "position_hint": "forward half of the wheelhouse surrounding the helm console" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central circulation area", "number": 2, "position_hint": "narrow center aisle between the aft threshold and forward controls" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "aft threshold zone", "number": 3, "position_hint": "inside the aft wall directly before the doorway" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "aft doorway", "number": 4, "position_hint": "center of the aft wall, opening inward toward the threshold" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "forward windshield", "number": 5, "position_hint": "single contiguous glazing run centered in the forward wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "port side window", "number": 6, "position_hint": "forward portion of the port wall beside the helm console" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "starboard side window", "number": 7, "position_hint": "forward portion of the starboard wall beside the operator chair" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "helm console", "number": 8, "position_hint": "centered against the forward wall beneath the windshield" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "steering wheel", "number": 9, "position_hint": "center-front face of the helm console" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "instrument display", "number": 10, "position_hint": "upper port section of the helm console" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "throttle control", "number": 11, "position_hint": "starboard end of the helm console" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "operator chair", "number": 12, "position_hint": "immediately aft of the helm console, facing forward" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "circular-mark cluster", "number": 13, "position_hint": "one contiguous patch on the forward starboard bulkhead beside the windshield" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "hand-held photograph", "number": 14, "position_hint": "near the center aisle between the aft doorway and operator chair" } ], "camera_recommendations": [ { "bg_id": "L19B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just inside number 4 (aft doorway), facing forward across number 2 (central circulation area) toward number 8 (helm console), with number 12 (operator chair) and number 13 (circular-mark cluster) beyond it", "framing_notes": "Use a cramped forward-facing composition that includes the doorway edge and threshold in the foreground, the helm controls prominently, the forward and side glazing, the circular-mark cluster on the forward starboard bulkhead, and the hand-held photograph near the central aisle.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle with restrained edge distortion", "sub_location": "wheelhouse_interior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] } ], "scale_guideline": "Treat the wheelhouse as a single enclosed deck-level compartment on a small fishing vessel; its exact height is not specified. A compact footprint roughly 2–3 m wide and 2.5–4 m deep, with an interior clear height around 2–2.3 m, is typical for this vessel class rather than textually confirmed. A single aft access door and broad forward and side glazing are typical; exact vessel-wide opening counts and additional deck levels are unspecified.", "applied_shots": [ "S29_Shot4", "S29_Shot7", "S29_Shot10" ], "group_id": "bg_small_fishing_boat", "depends_on_fp": [] } }, "consumed_bg_catalog_hash": "7fa972f12bad197d", "consumed_shot_binding_hash": "e11fc7c194f4581b" }, "step_id": "floor_plan_prompt", "run_id": "69d223c7-3a51-4307-9698-83283fb1cc4b", "resolved_model": "gpt", "updated_at": "2026-07-20T21:07:05.525758+00:00", "project_config_snapshot": {} }