{
  "status": "completed",
  "applicable_count": 1,
  "completed_count": 1,
  "failed_count": 0,
  "schema_version": 1,
  "config_hash": "f89d97e368673692",
  "data": {
    "floor_plans": {
      "fp_l04_rooftop_exterior": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l04_rooftop_exterior.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a contemporary rooftop exterior on an older low-rise urban villa. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric shapes only, and minimal text. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, or material rendering. Show a compact rectangular rooftop room along the east side of an open roof deck, reflecting a practical contemporary coastal urban layout: an iron entry door and a small front window on the west-facing facade, a separate small window on the south facade, an exposed water tank in the northwest service corner, a clothesline in the southwest open area, a low rectangular drying platform beneath it, a stair access landing at the southwest roof edge, and a protective parapet around the roof perimeter. Depict the door with a standard plan swing arc, each window as double parallel lines within its wall, the water tank as one simple circular fixture glyph, the clothesline as one contiguous thin-line fixture, and the drying platform as a plain rectangle. Apply single flat pastel zone fills with no blending: pale gray for the open Rooftop Zone, pale blue for the Rooftop Room, pale cyan for the Water Service Zone, pale yellow for the Drying Zone, and pale beige for the Stair and Entry Threshold Zones. Place one small circled black number exactly once for each base element: 1 on the open rooftop deck, 2 inside the rooftop room, 3 at the iron entry door, 4 at the front window, 5 at the side window, 6 on the water tank, 7 on the single clothesline run, 8 on the drying platform, 9 at the stair access landing, and 10 on one representative south parapet run. Do not draw markers 11 through 17 and do not depict any windblown leaves, flyer, forced-door state, attacker silhouette, police light, dawn glow, or police responders; these are transient overlay content. Only short generic zone labels and an optional small north arrow may appear as text. Do not draw camera icons, field-of-view cones, arrows, dimensions, legends, decorative objects, people, vehicles, or event annotations."
      },
      "fp_l05_rooftop_home": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l05_rooftop_home.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2020s Korean urban rooftop dwelling. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric plan symbols only, and minimal text. Strictly exclude 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, and material rendering. Use solid flat pastel fills with no blending: pale yellow for the shared living and dining area, pale cyan for the kitchen and bathroom service zones, pale blue for both private bedrooms, pale beige for the entry threshold, and pale gray for the rooftop utility apron and stair landing. Short generic area text may read Shared Zone, Private Zone, Service Zone, Threshold Zone, and Utility Zone; include no other written labels except a small north arrow if desired. Lay out a modest single-level rooftop home entered directly from an exterior roof apron through one metal swing door into a small threshold and central living-dining room. Place a narrow wall-mounted kitchenette along one side of the shared room, a dining table near it, and a television against the opposite wall. Arrange two compact bedrooms and one small bathroom off the shared circulation, following space-efficient contemporary rooftop housing geometry. Give the living room one small exterior window. Give the daughter bedroom one exterior window with a single curtain run and place its bed along a side wall. Place the main bed against a wall in the main bedroom. Show the kitchen sink and faucet and a separate stovetop as simple top-down fixture glyphs. Show the bathroom washbasin and mirror as one compact fixture location. Outside, show one rooftop water tank and one stair landing connected to the entrance path. Doors must use a line and swing arc, windows must use double parallel wall lines, beds must be rectangles with pillow shapes, the dining table must be a simple rectangle, and the television must be a simple narrow rectangular glyph. Place exactly one small white circular marker with a black numeral at each base location numbered 1 through 23: 1 shared living and dining area, 2 kitchen zone, 3 main bedroom, 4 daughter bedroom, 5 bathroom, 6 entry threshold, 7 rooftop utility apron, 8 metal entrance door, 9 main bedroom door, 10 daughter bedroom door, 11 bathroom door, 12 living window, 13 daughter bedroom window, 14 sink and faucet, 15 stovetop, 16 dining table, 17 television, 18 main bed, 19 daughter bed, 20 daughter window curtain, 21 bathroom washbasin with mirror, 22 rooftop water tank, and 23 rooftop stair landing. Each numeral must appear exactly once at one contiguous location. Do not draw markers 24 through 40 and do not depict any blood, body, footprints, cups, photographs, red circles, facial distortion, fallen furniture, scattered objects, open-window state, rattling-door state, event cue, person, camera icon, field-of-view cone, or directional camera arrow."
      },
      "fp_l13_external_stairs": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l13_external_stairs.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of an exterior stair route connecting the rear approach of a compact low-rise multifamily building to a rooftop room. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric plan symbols only, and minimal text. Show a practical modern Korean urban-villa layout: a compact lower approach landing, a straight lower exterior stair flight, a rectangular intermediate turning landing, a parallel upper stair flight forming a switchback ascent, and an upper rooftop landing beside a metal rooftop-room entrance door. Show stair treads as evenly spaced parallel lines, the door as a standard line-and-swing-arc plan symbol, one contiguous outer guardrail run along the exposed stair edge, one contiguous rooftop parapet edge, and a simple circular or rectangular rooftop water-tank symbol set away from the landing. Apply single flat pastel solid fills consistently: lower threshold zone pale beige, stair circulation zone pale blue-gray, intermediate landing zone pale muted yellow, and rooftop utility zone pale gray. Area labels may appear only as the generic text Threshold Zone, Stair Zone, Landing Zone, and Rooftop Utility Zone. Add small white circles with black numbers exactly once for base elements 1 through 9: 1 lower approach landing, 2 lower stair flight, 3 intermediate turning landing, 4 upper stair flight, 5 rooftop landing, 6 rooftop-room metal entrance door, 7 outer stair guardrail run, 8 rooftop parapet edge, 9 rooftop water tank. Do not draw marker 10 or any half-open door state because it belongs to the transient overlay. Include a small north arrow in one corner. Do not include people, bicycles, odor cues, motion cues, urgency symbols, camera icons, field-of-view cones, or event annotations. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, or material rendering."
      },
      "fp_l09_market_store": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l09_market_store.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a contemporary urban supermarket in a mid-2020s coastal Korean city. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only, and minimal text. The plan is a broad rectangular single-level retail unit: a recessed entrance threshold on the south side leads through centered automatic sliding glass doors into a large retail floor; separate continuous storefront glazing runs sit west and east of the doors. Place two checkout counters near the south exit route, three distinct parallel gondola shelf runs across the center with broad customer aisles between them, one continuous perimeter shelf run along the west wall, one continuous perimeter shelf run along the east wall, and a rear restocking service zone along the north side. Use simple top-down symbolic glyphs: shelving as narrow outlined rectangles with internal divider lines, checkout counters as simple block forms, sliding doors as paired parallel door panels, and storefront windows as double parallel wall lines. Apply one consistent flat pastel solid fill per area: Retail Floor shared zone in pale yellow, Entrance Threshold in pale beige, and Restocking Service Zone in pale cyan. Generic zone names may appear as larger text only: Retail Floor, Entrance Threshold, Restocking Service Zone. Draw one small circular marker with a black number exactly once at each base element: 1 retail floor, 2 entrance threshold, 3 sliding entrance doors, 4 west storefront glazing, 5 east storefront glazing, 6 west perimeter shelving, 7 west central shelf run, 8 middle central shelf run, 9 east central shelf run, 10 east perimeter shelving, 11 west checkout counter, 12 east checkout counter, and 13 restocking service zone. Do not draw number 14 or any stocking carton because it is a transient scene-overlay object. Do not draw people, employees, bicycles, products, loose cartons, event cues, camera icons, view cones, arrows, legends, descriptive annotations, or other text. A small north arrow marked N may appear in one corner. Strictly flat 2D only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering."
      },
      "fp_l10_market_entrance": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l10_market_entrance.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan of a contemporary large supermarket entrance in a coastal urban district. Show only the entrance frontage, enclosed threshold vestibule, immediate commercial interior edge, covered exterior apron, bicycle approach lane, fixed bicycle rack, shallow awning footprint, storefront glazing, automatic doors, and fixed security-camera mounting position. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols, and generous spacing for immediate readability. Use one consistent flat pastel solid fill per distinct zone: pale yellow for the shared commercial interior, pale cyan for the enclosed vestibule, pale beige for the covered entrance apron beneath the awning, pale gray for the surrounding exterior forecourt, and pale green for the bicycle approach lane. No gradients, blending, or drop shadows. Place the building along the north side and the open forecourt along the south side. At the center of the facade, show a typical contemporary supermarket entrance sequence: outer automatic sliding door number 5, compact vestibule number 6, and inner automatic sliding door number 7. Draw each sliding-door assembly as one contiguous opening with parallel sliding panels. Show commercial interior zone number 12 north of the vestibule. Show west storefront window run number 9 and east storefront window run number 10 as separate double parallel lines in the facade wall. Outside, show covered entrance apron number 1 centered before the doors. Show bicycle approach lane number 2 entering from the southwest and ending beside fixed bicycle rack number 3 on the west side of the apron. Outline one shallow rectangular awning number 4 over the central apron without obscuring the plan below. Show fixed security camera number 8 as a tiny top-down wall-mounted surveillance-camera glyph beneath the east side of the awning beside the outer door, aimed diagonally across the apron; do not draw a coverage cone. Reflect contemporary regional commercial geometry through broad glazing, a sheltered entrance, automatic sliding doors, and practical bicycle access, while keeping the image purely schematic. Add one small circle containing a unique black number exactly once for each base element numbered 1 through 10 and 12. Number 11 is a transient parked bicycle reserved for a separate state overlay: do not draw the bicycle or marker 11 anywhere on this floor plan. Optional larger generic area labels are limited to Shared Zone, Threshold Zone, and Exterior Zone. A small north arrow may appear in one corner. No legend, object names, annotations, people, vehicles, event cues, camera-position icons, field-of-view arrows, or other text inside the drawing. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering."
      },
      "fp_l11_admin_office": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l11_admin_office.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of a compact contemporary administrative security office inside a large retail facility. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols only, and a restrained modern back-of-house layout typical of a mid-2020s urban commercial facility. Divide the rectangular office into three clearly bounded functional areas with consistent solid pastel fills: number 1, a pale yellow central shared work and standing-viewing zone; number 2, a pale cyan narrow equipment service strip along the north wall; and number 3, a pale beige threshold zone at the southwest entrance. Place number 4 on one inward-swinging staff door in the south wall near the southwest corner, drawn with a standard door leaf and swing arc. Place number 5 on a simple rectangular CCTV workstation desk along the north-central side, facing the north wall. Place number 6 on one top-down office-chair glyph directly south of the desk, leaving clear standing room behind it for observers. Place number 7 once at the center of a single contiguous bank of several modern CCTV monitors arranged on the desk. Place number 8 once on a compact built-in recording equipment cabinet in the northeast corner. Draw every base element as a simple symbolic top-down glyph and place exactly one small white circle with a black number for each number 1 through 8. Do not draw number 9 or any dark playback image, blur, people, event cue, camera icon, field-of-view cone, or shot arrow; number 9 is a transient screen-state overlay reserved for the downstream background. Minimal text inside the diagram: only the generic area labels Shared Zone, Service Zone, and Threshold Zone may appear in larger plain lettering, plus an optional small north arrow. No other labels, legends, annotations, or prose inside the plan. Strictly flat 2D CAD-like plan only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered lighting, no lighting effects, no textured surfaces, and no material rendering. Use only solid pastel area fills with no blending or drop shadows."
      },
      "fp_l14_police_office": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l14_police_office.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2020s South Korean urban police team office. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, simple geometric room boundaries, and conventional top-down furniture and opening glyphs only. The plan contains a main shared work zone in flat pale yellow, a central circulation aisle in flat pale green, an entry threshold zone in flat pale beige, a small coffee service alcove in flat pale cyan, and a narrow filing-storage strip in flat pale gray. Use each flat pastel color consistently, with sharp boundaries and no blending. Arrange a glazed entry door in the south wall, opening into the threshold and a clear central aisle; place one internal corridor doorway on the west wall and one contiguous double-line exterior window run on the north wall. Put two separate rectangular workstations across the northern half: a senior officer desk at northwest with one top-down desk chair, and a detective workstation at northeast with one monitor glyph. Add one fixed coffee counter in the southwest service alcove and one contiguous filing cabinet bank along the east wall. Show doors with line-and-arc swing symbols, the window as double parallel wall lines, desks as plain rectangles, the chair as a simple plan symbol, and the monitor as a small thin rectangle. Place small circular markers with black numbers exactly once for base elements 1 through 13 at their single specified locations. Do not draw markers 14, 15, 16, or 17 and do not depict their transient photographs, screen result, handheld phone, or note. Minimal text is allowed only for the generic area labels Shared Work Zone, Circulation Zone, Threshold Zone, Service Zone, and Storage Zone, plus a small north arrow marked N. No other labels or annotations. Strictly no 3D, isometric, perspective, axonometric projection, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, material rendering, decorative illustration, camera icons, field-of-view cones, or event-state graphics."
      },
      "fp_l15_station_road": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l15_station_road.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan diagram of a compact contemporary coastal-city civic station roadside frontage. Show the station building as a simple rectangular footprint across the north half, aligned close to the street in a practical mid-2020s urban layout. Place a small frontage apron along its south side, a single main entrance door with a standard plan-view swing arc slightly west of center, and one contiguous front window run east of the door shown as double parallel lines in the wall. Add a dedicated bicycle parking bay at the east side of the apron with one simple fixed rack glyph. Place a continuous pedestrian sidewalk south of the apron and a plain roadway parallel to it along the south edge, creating a clear physical route from the bicycle bay to the road without arrows or motion graphics. Use single-weight black outlines on a white or off-white background and geometric plan symbols only. Apply one consistent flat pastel solid fill to each area: station shared zone pale yellow, frontage threshold zone pale beige, bicycle utility zone pale cyan, pedestrian zone pale green, and roadway exterior zone pale gray. Draw small circles containing unique black numbers exactly once for base elements 1 through 8 at their specified contiguous locations. Do not draw number 9 or the bicycle because it is a transient overlay object. Allow only short generic area labels such as Shared Zone, Threshold Zone, Utility Zone, Pedestrian Zone, and Exterior Zone, plus an optional small north arrow; include no other words or annotations. Do not draw people, departure trails, motion lines, camera icons, field-of-view cones, or event-state cues. Strictly forbid 3D, isometric, perspective, axonometric, depth effects, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, and material rendering."
      },
      "fp_l18_deck": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l18_deck.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a small mid-2020s western coastal fishing-boat deck. Show a tapered boat perimeter with a broad open working deck in the aft half, a compact enclosed wheelhouse centered in the forward half, narrow exterior passages along both sides of the wheelhouse, and an aft-facing wheelhouse doorway with a clearly defined threshold. Inside the wheelhouse, show a simple top-down helm-console glyph against the forward wall. Draw one continuous front windshield run and one side window on each side wall using double parallel window lines. Draw separate simple safety-railing runs along the stern, port edge, and starboard edge. Use practical compact geometry typical of a contemporary small working fishing vessel, with the wheelhouse forward and the unobstructed work deck aft. Fill the open working deck with flat pale yellow, the wheelhouse control area with flat pale blue, the doorway threshold with flat pale beige, and both utility side passages with flat pale gray; use solid pastel fills only, consistently by zone. Use single-weight black outlines on a white or off-white background and geometric architectural-plan symbols only. The door must be shown as a line with a swing arc, windows as double parallel wall lines, and the helm console as a plain top-down rectangle with a small wheel symbol. Place exactly one small circular black-number marker for each base element numbered 1 through 13, each at its single unambiguous location. Do not draw markers 14 or 15 because the photograph and map are transient overlay objects. Minimal interior text only: Shared Zone, Control Zone, Threshold Zone, and Utility Zone; optionally include a small north arrow in one corner. Do not include any other labels, annotations, camera icons, field-of-view cones, people, photograph, map, confrontation action, or supernatural marks. No 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, or material rendering. The result must look like a clean simple architectural CAD plan or room-layout sketch, never an artistic render."
      },
      "fp_l19_wheelhouse": {
        "status": "ok",
        "png_path": "/Users/manta/Documents/Projects/TheRoad-I1/projects/705ead84-e08d-44fd-a244-0a671a7a4f7e/episodes/8a0a9553-3523-4c59-b883-177c901cb630/images/floor_plan/fp_l19_wheelhouse.png",
        "attempts": 1,
        "ref_used": "text_only",
        "error": "",
        "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a cramped enclosed wheelhouse on a small contemporary fishing vessel. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, simple geometric symbols, and minimal text. The compact rectangular enclosure has a forward control zone filled solid pale cyan, a narrow central circulation zone filled solid pale yellow, and an aft threshold zone filled solid pale beige; keep every fill perfectly flat and consistent, with no gradients or blending. Place a centered inward-swinging doorway in the aft wall, a single broad windshield run in the forward wall, one separate window run in the forward portion of the port wall, and one separate window run in the forward portion of the starboard wall. Put a compact rectangular helm console directly below the forward windshield, with distinct top-down symbols for a steering wheel, instrument display, and throttle control; place one simple operator chair immediately aft of the console, facing forward. Show door swing arcs and windows as double parallel wall lines. Add small circular markers with black numbers 1 through 12, each number appearing exactly once at its corresponding single contiguous location: 1 control zone, 2 central circulation area, 3 aft threshold zone, 4 aft doorway, 5 forward windshield, 6 port side window, 7 starboard side window, 8 helm console, 9 steering wheel, 10 instrument display, 11 throttle control, 12 operator chair. Only the generic area labels Control Zone, Circulation Zone, and Threshold Zone may appear, plus an optional small north arrow. Do not draw marker 13, marker 14, circular marks, a photograph, people, event cues, camera icons, view cones, or shot arrows because those belong to transient overlays. Strictly exclude 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, decorative illustration, and furniture shown in perspective."
      }
    }
  },
  "step_id": "floor_plan_render",
  "run_id": "cd21decd-5e39-450f-ab0f-2079005eadf7",
  "resolved_model": "gpt",
  "updated_at": "2026-07-20T21:15:24.803501+00:00",
  "project_config_snapshot": {}
}