{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 10, "config_hash": "98833fa1843c165d", "data": { "per_fp": { "fp_l01_repair_shop_main": { "fp_id": "fp_l01_repair_shop_main", "shot_aware_bg_render_plan_status": "ok", "graph": { "nodes": [ { "bg_id": "L01B01", "node_index": 0, "mode": "fp_seeded_anchor", "is_dwelling_identity_anchor": true, "rationale": "This BG is an allowed anchor candidate and establishes the dwelling identity from base markers 1 through 6 without a prior rendered reference. A wide view from camera unit 2 toward unit 1 supports the shared spatial context required by S1_Shot3 and the marker-4 detail required by S1_Shot5 while retaining unit 2 as the camera-side area.", "reference_decision": { "selected_refs": [], "rejected_refs": [], "same_physical_space_dedup_decision": "not_applicable_anchor", "why_single_ref_or_two_refs": "No reference is selected because this first node is the floor-plan-seeded dwelling identity anchor.", "physical_space_id_per_ref": [], "same_physical_space_low_delta_candidate": false, "low_delta_reuse_target_bg_id": "", "low_delta_rationale": "" }, "camera_decision": { "camera_unit": 2, "camera_cell": [ 8, 4 ], "look_at_unit": 1, "look_at_cell": [ 2, 6 ], "lens_enum": "wide", "fov_deg": 90, "framing_notes": "Broad coverage from unit 2 toward marker 4 in unit 1 preserves context for both consuming shots, with the detailed shot able to use a tighter crop within this established view." }, "render_guidance": { "visible_space_directive": "Show camera-side unit 2 and the visible extent of unit 1, oriented toward base marker 4 at look-at cell [2,6]. Preserve base markers 1, 2, 4, 5, and 6 in the established space, with opening marker 3 included only where the wide view cone exposes it.", "camera_framing_directive": "Use broad 90-degree coverage from camera unit 2 at [8,4], looking toward unit 1 at [2,6]. Establish enough fixed spatial context for the center-left close staging in S1_Shot3 and the lower-frame marker-4 insert staging in S1_Shot5 without changing the committed camera-cell or look-at-cell relationship.", "subject_position_directive": "For S1_Shot3, preserve the committed center-left hunched upper-body placement leaning toward frame right, with the fixed background remaining secondary. For S1_Shot5, preserve the withdrawing hand and partial rising torso beyond the near edge of marker 4, with marker 11 in the lower center and marker 7 in the middle-left.", "state_cue_directive": "Carry transient markers 7, 10, and 11 as the committed state cues. Keep marker 11 on marker 4 and marker 7 beside it as staged for S1_Shot5; marker 10 may appear only as committed by the BG facts and must not introduce an additional unlisted state.", "negative_continuity_directive": "Do not include ignored overlay markers 8 or 9. Do not displace base markers 3, 4, 5, or 6 from their floor-plan-established positions, and do not add spaces beyond units 1 and 2 or openings beyond marker 3." }, "render_action": "render_new_plate", "reuse_target_bg_id": "", "anchor_shot_id": "", "projection_card_id": "", "projection_card_hash": "", "projection_card_state": "not_applicable", "projection_card_fallback_reason": "no_projection_card_target", "projection_card_source_bg_id": "L01B01", "projection_card_inherited": false, "plate_group_id": "L01B01", "plate_anchor_bg_id": "L01B01", "needs_new_plate": true, "plate_anchor_shot_id": "", "plate_shareability": "exclusive", "render_order_index": 0, "ref_tree_parents": [], "ref_role_per_parent": {}, "max_refs": 2, "render_action_source": "geometry_route", "partition_fallback_reason": "partition_plan_missing" }, { "bg_id": "L01B02", "node_index": 1, "mode": "same_physical_space_view", "is_dwelling_identity_anchor": false, "rationale": "This BG depicts the same physical space and uses the same broad camera-unit 2 to look-at-unit 1 geometry as L01B01, so L01B01 supplies structural continuity. A new plate is required because marker 8 commits a changed arrangement involving marker 4 and the floor area, rather than a purely subject-level or transient-object delta.", "reference_decision": { "selected_refs": [ { "ref_bg_id": "L01B01", "physical_space_id": "physical_space_1", "space_description": "The same physical space defined by base units 1 and 2, opening marker 3, and fixed markers 4 through 6." } ], "rejected_refs": [], "same_physical_space_dedup_decision": "single_reference_same_physical_space", "why_single_ref_or_two_refs": "One earlier reference is sufficient because both consuming shots remain within the single physical space already established by L01B01; no second distinct co-visible space is committed.", "physical_space_id_per_ref": [ "physical_space_1" ], "same_physical_space_low_delta_candidate": false, "low_delta_reuse_target_bg_id": "", "low_delta_rationale": "" }, "camera_decision": { "camera_unit": 2, "camera_cell": [ 8, 4 ], "look_at_unit": 1, "look_at_cell": [ 2, 6 ], "lens_enum": "wide", "fov_deg": 90, "framing_notes": "Broad coverage from unit 2 toward unit 1 supports the full shared-space staging in S3_Shot2 while retaining sufficient opening-marker context for the tighter S3_Shot3 crop." }, "render_guidance": { "visible_space_directive": "Show camera-side unit 2 and the visible extent of unit 1, oriented toward marker 4 at look-at cell [2,6], with opening marker 3 present where exposed by the wide cone. Preserve the L01B01 positions of structural units 1 and 2 and fixed markers 3, 5, and 6, while applying the marker-8 arrangement to marker 4 and its adjacent floor area.", "camera_framing_directive": "Use broad 90-degree coverage from camera unit 2 at [8,4], looking toward unit 1 at [2,6]. The master framing must support the center-right and lower-left shared-space relation in S3_Shot2 and permit the tighter middle-left profile framing beside opening marker 3 in S3_Shot3.", "subject_position_directive": "For S3_Shot2, preserve one committed subject in a compact crouch at center-right and the blanket-covered subject extending across the lower-left, with the marker-8 floor area visible behind them. For S3_Shot3, preserve the committed profile subject at middle-left beside the inner edge of opening marker 3, with marker 10 held near the subject's hand and directed off screen toward frame right.", "state_cue_directive": "Apply transient and state markers 8, 9, and 10 exactly as committed: marker 8 changes the marker-4 and floor arrangement, marker 9 occupies the lower-left resting area for S3_Shot2, and marker 10 supplies the staged hand-held light action for S3_Shot3.", "negative_continuity_directive": "Do not include ignored overlay markers 7 or 11. Maintain reference L01B01 continuity for units 1 and 2 and markers 3, 5, and 6, but do not copy the prior marker-4 placement over the committed marker-8 arrangement. Do not expose spaces outside units 1 and 2 or invent openings beyond marker 3." }, "render_action": "render_new_plate", "reuse_target_bg_id": "", "anchor_shot_id": "", "projection_card_id": "", "projection_card_hash": "", "projection_card_state": "not_applicable", "projection_card_fallback_reason": "no_projection_card_target", "projection_card_source_bg_id": "L01B02", "projection_card_inherited": false, "plate_group_id": "L01B02", "plate_anchor_bg_id": "L01B02", "needs_new_plate": true, "plate_anchor_shot_id": "", "plate_shareability": "exclusive", "render_order_index": 1, "ref_tree_parents": [ "L01B01" ], "ref_role_per_parent": { "L01B01": "space_continuity" }, "max_refs": 2, "render_action_source": "geometry_route", "partition_fallback_reason": "partition_plan_missing" } ] }, "validators": { "required_shape_ok": true, "graph_completeness_ok": true, "node_index_order_ok": true, "dag_ok": true, "max_refs_per_bg_ok": true, "two_refs_distinct_spaces_ok": true, "same_fp_only_ok": true, "anchor_exactly_one_ok": true, "anchor_in_clean_candidate_set_ok": true, "camera_in_candidates_ok": true, "rationale_and_mode_ok": true, "synthetic_readback_production_clear": true, "all_validators_passed": true, "diagnostics": [], "render_action_routing_ok": true, "reuse_plate_count": 0, "card_withhold_count": 0, "projection_card_state_counts": { "not_applicable": 2 }, "plate_group_count": 2, "plate_shareability_counts": { "exclusive": 2 }, "dag_node_count": 2, "space_partition_applied": false, "space_partition_fallback_reason": "partition_plan_missing" }, "real_api_call_counts": { "image": 0, "llm": 1, "vlm": 0 }, "readback_status": "ok", "production_clear": true, "diagnostics": [] } }, "real_api_call_counts": { "image": 0, "llm": 1, "vlm": 0 }, "llm_provider_attempts_per_fp": { "fp_l01_repair_shop_main": 1 }, "shot_staging_index_diagnostics": { "shot_staging_index_explicit_id": 0, "shot_staging_index_synthesized_id": 6, "shot_staging_index_dropped_no_id": [], "shot_staging_index_dropped_bad_index_type": [], "shot_staging_index_collisions": [] } }, "step_id": "shot_aware_bg_render_plan", "run_id": "a8e8b394-2214-42a4-9864-09a1753cb032", "resolved_model": "gpt", "updated_at": "2026-08-28T03:53:22.375940+00:00", "project_config_snapshot": {} }