{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 2, "config_hash": "b721e41033bb6bac", "data": { "floor_plans": { "fp_l01_reed_field": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic 2D architectural floor plan diagram of a winter reed-field pursuit route leading to a small wooden salt-storage shed in an early twentieth-century coastal setting. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background and geometric symbols only. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering. Fill the large winter reed-field exterior zone with one flat pale gray-green color and identify it only with the generic area text “Exterior Zone.” Represent reed growth with sparse, evenly distributed, simple black line glyphs while preserving a readable south-to-north approach corridor; do not show individual moving people. At the north-northeast edge, draw a compact, slightly irregular rectangular single-room storage shed footprint with one flat pale cyan interior fill and the generic area text “Service Zone.” Indicate improvised plank-and-timber construction only through simple wall geometry, never through texture or shading. Center one broad single-leaf hinged entrance in the shed’s south-facing wall, using a standard door line and swing arc. Directly outside that door, draw a small flat pale beige threshold area with the generic area text “Threshold Zone.” Maintain enough open longitudinal field space south of the shed to support an approximately 20 m separation between groups, but include no dimensions or scale annotations. Draw exactly four small numbered circles on the base diagram: black number 1 once in the reed-field area, black number 2 once inside the storage shed, black number 3 once beside the entrance-door symbol, and black number 4 once in the exterior threshold area. Do not draw numbers 5, 6, or 7, and do not draw pursuit arrows, people, soldiers, weapons, bullets, bodies, blood, impact marks, or any other transient event cue. Minimal text only: the three permitted generic zone labels and an optional small north arrow marked “N.” No title, legend, camera icon, field-of-view cone, decorative border, or other annotation.", "key_elements": [ "Long winter reed-field exterior organized around a south-to-north pursuit axis", "Compact improvised single-room wooden salt-storage shed at the north-northeast edge", "Broad single-leaf warehouse entrance facing the reed-field approach", "Clear threshold area immediately outside the entrance", "Sufficient field depth to support the stated approximately 20 m separation between fleeing people and pursuers", "Transient pursuit path, pursuer formation, and rifle-fire lanes reserved for per-background overlays" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "winter reed field", "number": 1, "position_hint": "large exterior area occupying the south, west, and central portions of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "wooden salt warehouse", "number": 2, "position_hint": "compact rectangular single-room shed at the north-northeast edge of the reed field" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "warehouse entrance door", "number": 3, "position_hint": "broad single-leaf door centered on the south-facing wall of the warehouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 4, "position_hint": "small open approach area directly south of the warehouse entrance" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "survivor flight path", "number": 5, "position_hint": "south-to-north route through the central reeds, converging on the entrance threshold; do not draw on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "pursuer formation", "number": 6, "position_hint": "broad line advancing through the southern reeds approximately 20 m behind the survivors; do not draw on the base plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "rifle fire lanes", "number": 7, "position_hint": "several converging trajectories from the southern pursuer line toward the central flight path; do not draw on the base plan" } ], "camera_recommendations": [ { "bg_id": "L01B02", "camera_height": "eye-level standing approximately 1.6 m, partially enclosed by tall winter reeds", "camera_position": "near number 1 in the southern half of the exterior zone, facing north-northeast along number 5 toward number 2 and the distant number 3, with number 6 approximately 20 m behind the fleeing group", "framing_notes": "Use the reed corridor as a strong pursuit axis; keep numbers 2 and 3 visible as the destination while depicting numbers 5, 6, and 7 as transient background-state cues.", "ignore_numbered_elements": [], "lens_hint": "35mm wide angle", "sub_location": "winter_reed_field", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ] }, { "bg_id": "L01B01", "camera_height": "low standing eye level approximately 1.4 m to emphasize the entrance rush", "camera_position": "near number 4 outside the warehouse, facing directly toward number 3 with number 2 filling the background and number 1 remaining behind the arriving group", "framing_notes": "Frame the broad entrance prominently and show number 5 converging on it; exclude the pursuer formation and rifle-fire lanes from this entrance-focused state.", "ignore_numbered_elements": [ 6, 7 ], "lens_hint": "28mm wide angle", "sub_location": "salt_warehouse_approach", "use_numbered_elements": [ 1, 2, 3, 4, 5 ] } ], "scale_guideline": "The warehouse is a single-storey structure; its exact height is not stated, so use a typical low coastal storage-shed height of roughly 3–4 m. Its footprint should be a modest single-room shed large enough for around ten people to gather with limited storage circulation, rather than a large industrial building. Only one broad ground-level entrance is confirmed; no windows, upper openings, stairs, tanks, parapets, or other vertical elements are established.", "applied_shots": [ "S1_Shot3", "S1_Shot5", "S1_Shot7" ], "group_id": "bg_reed_field_warehouse", "depends_on_fp": [] }, "fp_l02_warehouse_interior": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of a small early-twentieth-century coastal rural salt-storage shed. Show a simple rectangular, single-bay interior with rough plank perimeter walls and exposed squared-timber posts and diagonal wall braces represented only by clean geometric plan symbols. Place the sole exterior opening at the center of the south wall: a rough hinged plank door shown with a standard neutral door-leaf line and swing arc, opening through a narrow interior threshold. Divide the floor into three non-overlapping flat color-coded areas: the main Shared Zone as pale yellow, the rear Refuge Zone along the north half as pale blue, and the narrow Threshold Zone at the south doorway as pale beige. Use each pastel as one solid fill with no blending. Draw single-weight black outlines on a white or off-white background. Add small circular black-number markers exactly once for base elements 1 through 5 only: 1 in the main warehouse interior, 2 in the rear refuge holding area, 3 at the interior threshold, 4 beside the hinged plank door, and 5 beside the west-wall timber framing. Do not draw markers 6 or 7 because they are transient door-state overlay metadata. Larger generic area text may read only Shared Zone, Refuge Zone, and Threshold Zone. A small north arrow with N may appear in one corner. Use minimal text and no other annotations. Do not invent windows, furniture, plumbing, appliances, weapons, people, bodies, blood, damage, motion trails, soldiers, or supernatural figures. No camera icons, field-of-view cones, or directional camera arrows. Strictly flat 2D only: no 3D, no isometric, no perspective, no axonometric view, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendered lighting, no lighting effects, no textured surfaces, and no material rendering.", "key_elements": [ "Single rectangular open-bay timber warehouse room", "Refuge holding area against the rear wall", "Narrow interior threshold zone at the sole exterior doorway", "Single rough hinged plank door centered on the front wall", "Exposed rough timber wall framing and braces", "No windows, furniture, plumbing, or modern utilities shown" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main warehouse interior", "number": 1, "position_hint": "center of the rectangular single-bay warehouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "survivor holding area", "number": 2, "position_hint": "north half of the room against the rear wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "door threshold zone", "number": 3, "position_hint": "narrow strip inside the south wall doorway" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "hinged plank door", "number": 4, "position_hint": "center of the south exterior wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "rough timber wall framing", "number": 5, "position_hint": "inner west wall, representing the persistent exposed posts and diagonal braces around the perimeter" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "door open state", "number": 6, "position_hint": "south doorway during the breach; overlay metadata only and not drawn on the floor plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "door firmly closed state", "number": 7, "position_hint": "south doorway after the violent interruption; overlay metadata only and not drawn on the floor plan" } ], "camera_recommendations": [ { "bg_id": "L02B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 2 (survivor holding area) at the north end, facing south across number 1 (main warehouse interior) toward number 3 (threshold) and number 4 (plank door)", "framing_notes": "Keep the sparse timber interior and door axis clearly readable; emphasize the open-door state represented by number 6 while retaining number 5 along the side wall.", "ignore_numbered_elements": [ 7 ], "lens_hint": "28mm wide angle", "sub_location": "salt_warehouse_interior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ] }, { "bg_id": "L02B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 2 (survivor holding area), facing directly across number 1 (main warehouse interior) toward number 3 (threshold) and number 4 (plank door)", "framing_notes": "Center the firmly closed door and preserve empty floor space around the threshold to convey shocked stillness; use the closed-door state represented by number 7.", "ignore_numbered_elements": [ 6 ], "lens_hint": "35mm moderate wide angle", "sub_location": "salt_warehouse_interior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 7 ] } ], "scale_guideline": "Treat the warehouse as a single-storey coastal rural storage shed; its height is not specified, so use a typical simple timber-storehouse height of roughly 3–4 m. The footprint should be a modest open room capable of holding more than ten people, typically around 40–80 square metres for this building type rather than an exact scripted measurement. One exterior wooden door is explicit; no windows or additional openings are specified, and there are no multi-storey stairs or other vertical circulation elements.", "applied_shots": [ "S2_Shot3", "S2_Shot5", "S2_Shot6" ], "group_id": "bg_reed_field_warehouse", "depends_on_fp": [] }, "fp_l03_main_staging": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan diagram on a white or off-white background. Show two separate modules divided by a wide clean white gutter: an early-twentieth-century improvised coastal plank warehouse with its forecourt on the left, and a compact mid-2020s coastal police substation interior on the right. Use single-weight black outlines, geometric plan symbols, and crisp flat pastel solid fills only. Absolutely no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, blending, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering.\n\nIn the left module, draw a small rectangular warehouse assembled from slightly irregular but schematic plank-wall segments, reflecting a quickly reinforced rural salt-storehouse layout. Place an enclosed Storage Zone in pale cyan, marker 1, with an open Exterior Zone forecourt in pale gray-green, marker 2, extending along the east and south sides. Add a narrow Threshold Zone in pale beige, marker 3, at the center of the east wall. Draw one simple single-leaf plank door with a conventional line and swing arc opening toward the forecourt, marker 4. Do not add modern fixtures, vehicles, weapons, people, bodies, blood, smoke figures, or event damage to this base module.\n\nIn the right module, draw a compact rectangular modern coastal police substation organized as a practical open office. Fill the central Shared Zone with pale yellow, marker 5; the northeast Private Zone with pale blue, marker 6; the northwest Service Zone with pale cyan, marker 7; and the south Threshold Zone with pale beige, marker 8. Add an inward-swinging entrance door in the south wall, marker 9. Add two windows as standard double parallel wall lines: marker 10 in the north wall and marker 11 in the east wall. Use simple top-down furniture glyphs: a rectangular supervisor desk in the northeast, marker 12; a smaller junior officer desk in the central shared area, marker 13; a straight public service counter along the west side, marker 14; a small landline telephone symbol on the supervisor desk, marker 15; and shallow built-in records shelving against the north and west sides of the service zone, marker 16. Arrange the desks with clear conversational sightlines and preserve an unobstructed path from the entrance to the shared office.\n\nDraw exactly one small white circle with a black numeral for every base element numbered 1 through 16, with each number appearing exactly once. Draw no markers numbered 17 through 22 and do not depict their associated transient casualties, blood, entity, spear, smoke-transfer trace, or smartphone. Area names may appear only as short generic labels: Storage Zone, Exterior Zone, Threshold Zone, Shared Zone, Private Zone, and Service Zone. No other text, legends, annotations, dimensions, camera icons, field-of-view cones, arrows, characters, or decorative imagery.", "key_elements": [ "Two separate plan modules divided by a clean white gutter", "Early-twentieth-century improvised plank warehouse and open forecourt", "Single main plank door connecting the warehouse interior to the forecourt", "Mid-2020s compact coastal police substation with an open shared office", "Supervisor desk and junior officer desk arranged for clear conversational sightlines", "Public service counter, built-in records shelving, and desk landline", "Flat pastel zone coding with numbered base markers only", "Transient casualties, blood, supernatural event cues, weapon, and smartphone excluded from the drawn base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "plank warehouse interior", "number": 1, "position_hint": "western half of the historical module, enclosed by irregular thin plank walls" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "warehouse forecourt", "number": 2, "position_hint": "east and south of the warehouse shell in the historical module" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "warehouse threshold zone", "number": 3, "position_hint": "narrow transition strip at the east wall of the warehouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main plank door", "number": 4, "position_hint": "center of the warehouse east wall, opening outward toward the forecourt" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared police office", "number": 5, "position_hint": "central and southern portion of the modern substation module" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "supervisor work zone", "number": 6, "position_hint": "northeast corner of the modern substation module" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "records and service zone", "number": 7, "position_hint": "northwest side of the modern substation module" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "substation threshold zone", "number": 8, "position_hint": "inside the south entrance of the modern substation module" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "substation entrance door", "number": 9, "position_hint": "south wall of the modern substation, opening inward" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "north office window", "number": 10, "position_hint": "north wall above the shared office and records side" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east office window", "number": 11, "position_hint": "east wall beside the supervisor work zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "supervisor desk", "number": 12, "position_hint": "within the northeast supervisor work zone, facing southwest" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "junior officer desk", "number": 13, "position_hint": "central shared office, oriented toward the supervisor desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "public service counter", "number": 14, "position_hint": "west side of the shared office, separating the entrance path from the records zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "landline telephone", "number": 15, "position_hint": "on the inner corner of the supervisor desk" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in records shelving", "number": 16, "position_hint": "against the north and west walls of the records zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "fallen military casualties", "number": 17, "position_hint": "scattered across the warehouse forecourt; overlay only and not drawn on the base plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "blood pools and trails", "number": 18, "position_hint": "across the forecourt around the fallen casualties; overlay only and not drawn on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "collapsed smoke-like entity", "number": 19, "position_hint": "forecourt near the warehouse doorway; overlay only and not drawn on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "antler-tipped spear", "number": 20, "position_hint": "at the collapsed entity near the warehouse doorway; overlay only and not drawn on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "handheld smartphone", "number": 21, "position_hint": "at the supervisor position inside the police office; overlay only and not drawn on the base plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "vanishing smoke transfer trace", "number": 22, "position_hint": "immediately around the collapsed entity in the forecourt; overlay only and not drawn on the base plan" } ], "camera_recommendations": [ { "bg_id": "L03B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "within number 2 (warehouse forecourt), facing west toward number 4 (main plank door), number 3 (door threshold), and number 1 (warehouse interior)", "framing_notes": "Keep the warehouse doorway in the middle distance while foreground space accommodates numbers 17 and 18; place numbers 19, 20, and 22 close to the doorway-side action area.", "ignore_numbered_elements": [ 21 ], "lens_hint": "28mm wide angle", "sub_location": "warehouse_forecourt", "use_numbered_elements": [ 1, 2, 3, 4, 17, 18, 19, 20, 22 ] }, { "bg_id": "L03B02", "camera_height": "eye-level seated-to-standing height ~1.5m", "camera_position": "near number 9 (substation entrance), facing diagonally across number 5 (shared office) toward number 12 (supervisor desk), number 13 (junior officer desk), and number 15 (landline telephone)", "framing_notes": "Show the bright windows at numbers 10 and 11, keep number 15 prominent on number 12, and allow number 21 to appear as a loose handheld object near the supervisor position.", "ignore_numbered_elements": [ 17, 18, 19, 20, 22 ], "lens_hint": "35mm moderate wide angle", "sub_location": "police_substation_interior", "use_numbered_elements": [ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 21 ] } ], "scale_guideline": "Treat both structures as single-storey, which is typical for a small improvised coastal storehouse and a compact local police substation; the text does not specify their storey counts. Typical clear interior heights would be roughly 2.4–3.2 m for the office and 2.5–4 m to the warehouse roof structure, while exact heights are unspecified. The warehouse should have a small salt-storehouse-scale footprint, typically about 6–10 m by 8–15 m, while the substation room should read as a compact office unit rather than a large station. The warehouse has one principal door directly supported by the scene; exact window and facade-opening counts for either structure are otherwise unspecified.", "applied_shots": [ "S3_Shot6", "S3_Shot12", "S3_Shot15", "S99_Shot1", "S99_Shot4" ], "group_id": "bg_reed_field_warehouse", "depends_on_fp": [] }, "fp_l10_main": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram on a white or off-white background. Present two clearly separated plan units on one reference sheet: a compact mid-2020s urban convenience-store interior and the passenger cabin of an older midsize SUV. Use clean architectural CAD-plan geometry, single-weight black outlines, simple symbolic top-down glyphs, and ample blank separation between the two units. The store is a shallow rectangular unit with a glazed front wall, an inward-swinging glass customer door near one front corner, a broad storefront window beside it, a cashier service area immediately beside the entrance, an L-shaped cashier counter facing the sales floor, two narrow parallel shelving gondolas through the center, clear circulation aisles, and a continuous refrigerated display fixture along the rear wall. Fill the retail sales floor with solid pale yellow, the cashier service zone with solid pale cyan, the entrance threshold with solid pale beige, and the refrigerated utility strip with solid pale gray. The separate SUV cabin is an elongated rounded rectangle with solid pale blue fill, two individual front seats, a dashboard and steering wheel at the front-left driving position, a full-width rear bench, four side-door openings, a front windshield, four side windows, and rear glazing. Use consistent flat pastel solid fills only, with no blending. Draw small circles containing unique black numbers 1 through 23 exactly once at their corresponding base elements. Do not draw numbers 24, 25, 26, or 27 because they are transient overlay elements. Inside the drawing, permit only short generic area names such as Shared Zone, Service Zone, Threshold Zone, Utility Zone, and Vehicle Zone; include no other text labels or annotations. Do not draw people, phones, envelopes, restraints, event cues, camera icons, viewing arrows, or field-of-view cones. Furniture and openings must remain simple top-down plan symbols. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic treatment, rendered lighting effects, textured surfaces, material rendering, or decorative illustration.", "key_elements": [ "Compact modern convenience-store sales floor with two parallel shelving aisles", "Cashier service zone beside the glazed customer entrance", "Storefront glazing and refrigerated display wall", "Separate top-down passenger-cabin plan for an older midsize SUV", "Front driver and passenger seats with dashboard and steering wheel", "Rear bench spanning the SUV cabin", "Four side doors, windshield, side windows, and rear glazing", "Transient message, money envelope, handheld phone, and bound-captive states excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "retail sales floor", "number": 1, "position_hint": "main rectangular store area between the storefront and rear refrigerated wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "cashier service zone", "number": 2, "position_hint": "front corner of the store beside the customer entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 3, "position_hint": "front wall between the cashier zone and storefront window" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "glass entrance door", "number": 4, "position_hint": "front wall at the entrance threshold, opening inward" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "storefront window", "number": 5, "position_hint": "front wall beside the glass entrance door" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "cashier counter", "number": 6, "position_hint": "inside the cashier service zone, facing the sales floor and entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "shelving gondolas", "number": 7, "position_hint": "two parallel narrow aisles centered on the retail sales floor" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "refrigerated display wall", "number": 8, "position_hint": "continuous fixture along the rear wall of the store" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "vehicle passenger cabin", "number": 9, "position_hint": "separate elongated vehicle-plan unit beside the store plan" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "driver seat", "number": 10, "position_hint": "front-left position of the vehicle cabin" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "front passenger seat", "number": 11, "position_hint": "front-right position of the vehicle cabin" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "dashboard and steering wheel", "number": 12, "position_hint": "across the front end of the cabin, with steering wheel before the driver seat" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rear bench seat", "number": 13, "position_hint": "full-width rear seating row behind the two front seats" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "driver door", "number": 14, "position_hint": "left side of the cabin beside the driver seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front passenger door", "number": 15, "position_hint": "right side of the cabin beside the front passenger seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left rear door", "number": 16, "position_hint": "left side of the cabin beside the rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right rear door", "number": 17, "position_hint": "right side of the cabin beside the rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "windshield", "number": 18, "position_hint": "front edge of the vehicle cabin ahead of the dashboard" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "driver side window", "number": 19, "position_hint": "within the driver door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front passenger window", "number": 20, "position_hint": "within the front passenger door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left rear window", "number": 21, "position_hint": "within the left rear door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right rear window", "number": 22, "position_hint": "within the right rear door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear glazing", "number": 23, "position_hint": "rear edge of the vehicle cabin behind the rear bench" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "bound rear-seat captive state", "number": 24, "position_hint": "lying lengthwise across the rear bench seat; overlay only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "urgent-message smartphone", "number": 25, "position_hint": "at the cashier counter in the store; overlay only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "driver handheld phone", "number": 26, "position_hint": "adjacent to the driver seat and steering wheel; overlay only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "money envelope", "number": 27, "position_hint": "on or immediately behind the cashier counter; overlay only" } ], "camera_recommendations": [ { "bg_id": "L10B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 3 (entrance threshold), facing diagonally across number 1 (retail floor) toward number 6 (cashier counter) and number 8 (refrigerated display wall)", "framing_notes": "Keep the counter prominent and retain some empty aisle space to communicate the near-empty night setting. Reference number 25 at the counter for the urgent smartphone message and number 27 for the money envelope.", "ignore_numbered_elements": [ 24, 26 ], "lens_hint": "35mm wide angle", "sub_location": "convenience_store_interior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 25, 27 ] }, { "bg_id": "L10B01", "camera_height": "seated eye level, approximately 1.2 m", "camera_position": "near number 11 (front passenger seat), facing across number 12 (dashboard) toward number 10 (driver seat), with a diagonal sightline back to number 13 (rear bench seat)", "framing_notes": "Frame the driver and rear bench within the confined cabin. Reference number 24 for the bound rear-seat captive state and number 26 for the driver's handheld phone.", "ignore_numbered_elements": [ 25, 27 ], "lens_hint": "24mm interior wide angle", "sub_location": "older_suv_cabin", "use_numbered_elements": [ 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26 ] } ], "scale_guideline": "The convenience-store portion represents a single-level ground-floor retail unit; a clear interior height of roughly 2.7–3.3 m is typical for this modern building type, but no height is specified in the text. Its footprint should read as a compact urban shop, typically about 50–100 square metres, with one customer entrance and one broad storefront window section. The vehicle portion represents one enclosed passenger level in an older midsize SUV, typically around 4.5–4.8 m long and 1.8–1.9 m wide, with four side doors, a windshield, four side windows, and rear glazing. No stair, parapet, tank, or multi-storey vertical element belongs to either represented interior.", "applied_shots": [ "S10_Shot3", "S10_Shot5", "S13_Shot3", "S13_Shot4" ], "group_id": "bg_multifamily_residence", "depends_on_fp": [] }, "fp_l11_main": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram on a white or off-white background. Present one unified staging sheet containing three clearly separated geometric modules with no implied physical connection: a long modern commuter-bus cabin across the upper portion, a modest contemporary residence living room with a compact entry threshold in the lower-left portion, and an older midsize SUV cabin in the lower-right portion. Use clean architectural CAD-plan conventions, single-weight black outlines, simple geometric shapes, and generous white gutters between modules. Fill the bus shared zone with one solid pale yellow pastel, the residence private zone with one solid pale blue pastel, the residence threshold zone with one solid pale beige pastel, and the SUV utility zone with one solid pale gray pastel; keep each fill uniform with no blending. The only permitted area text is the larger generic zone labels 'Shared Zone', 'Private Zone', 'Threshold Zone', and 'Utility Zone'. Add a small north arrow with 'N' in one corner if space permits. In the bus module, show a central aisle, paired rows of fixed forward-facing seats, a front-right passenger entry with a plan-view door swing, and continuous window banks represented by double parallel wall lines on both long sides. In the residence module, show a small recessed entry threshold, an inward-swinging entrance door, one exterior window represented by double parallel lines, a sofa as a long divided rectangle, a low rectangular table, and a simple fixed ceiling-light plan symbol. In the SUV module, show a compact cabin outline, two front seats divided by a narrow console, a full-width rear bench, side window banks, front side doors and rear side doors as simplified vehicle-plan openings, and a small rearview-mirror symbol at the front center. Place small white circles with unique black numbers exactly once for base markers 1 through 21, positioned beside their corresponding areas, openings, fixtures, and anchor furniture. Do not draw markers 22 through 27 and do not depict any smartphone message, smoke face, supernatural reflection, wreckage, broken debris, bloodstain, restraint, person, assault, city-light streak, or other event-state cue. Use no text other than the allowed generic zone labels, marker numbers, and optional north indicator. No camera icons, view cones, arrows, dimensions, legends, or annotations. No 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered lighting, textured surfaces, material rendering, or decorative effects.", "key_elements": [ "Composite staging sheet with separate transit, residence, and private vehicle modules", "Modern commuter-bus cabin with central aisle, fixed forward-facing seats, front entry, and continuous side windows", "Modest contemporary residence living room with a compact entrance threshold and persistent anchor furniture", "Older midsize SUV cabin with front seats, rear bench, side windows, doors, and rearview mirror", "Flat pastel zone coding with unique numbered base markers", "Transient phone display, reflected smoke face, wreckage, shattered debris, bloodstains, and restraints excluded from the base drawing" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "commuter bus cabin", "number": 1, "position_hint": "upper portion of the composite sheet, long rectangular shared transit module" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bus front entry door", "number": 2, "position_hint": "front-right corner of the commuter bus cabin" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left bus window bank", "number": 3, "position_hint": "continuous opening band along the left wall of the commuter bus cabin" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right bus window bank", "number": 4, "position_hint": "continuous opening band along the right wall of the commuter bus cabin" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "fixed bus seat rows", "number": 5, "position_hint": "paired forward-facing seat rows on both sides of the central aisle" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "residence living room", "number": 6, "position_hint": "lower-left portion of the composite sheet, adjoining the entrance threshold" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "residence entry threshold", "number": 7, "position_hint": "small recessed threshold at the outer edge of the residence living room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "residence entrance door", "number": 8, "position_hint": "outer wall of the entry threshold, opening inward toward the living room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "residence window", "number": 9, "position_hint": "exterior wall opposite or diagonally across from the entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "living room sofa", "number": 10, "position_hint": "against one long wall of the residence living room" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low living room table", "number": 11, "position_hint": "near the center of the residence living room in front of the sofa" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "ceiling light fixture", "number": 12, "position_hint": "centered over the residence living room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "older SUV cabin", "number": 13, "position_hint": "lower-right portion of the composite sheet, compact vehicle module" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "SUV front seat pair", "number": 14, "position_hint": "front half of the SUV cabin, split by a narrow center console" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "SUV rear bench seat", "number": 15, "position_hint": "rear half of the SUV cabin, spanning most of the cabin width" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "SUV left window bank", "number": 16, "position_hint": "left side of the SUV cabin beside the front and rear seats" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "SUV right window bank", "number": 17, "position_hint": "right side of the SUV cabin beside the front and rear seats" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "rearview mirror", "number": 18, "position_hint": "front-center of the SUV cabin above the dashboard line" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "SUV driver door", "number": 19, "position_hint": "left side of the front seating row" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "SUV front passenger door", "number": 20, "position_hint": "right side of the front seating row" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "SUV rear side doors", "number": 21, "position_hint": "paired side openings aligned with the rear bench" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "urgent smartphone message display", "number": 22, "position_hint": "held by the passenger seated beside a bus window; never draw on the base plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "smoke face in window reflection", "number": 23, "position_hint": "strictly contained within a bus window surface beside a window seat; never draw on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "furniture", "label": "broken and displaced furniture", "number": 24, "position_hint": "scattered across the residence living room around the sofa and low table; never draw on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "shattered fixture and planter debris", "number": 25, "position_hint": "distributed across the residence floor beneath the light and near room edges; never draw on the base plan" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "residence bloodstains", "number": 26, "position_hint": "irregular marks at several points on the residence floor and nearby surfaces; never draw on the base plan" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "rear-seat restraints", "number": 27, "position_hint": "around the rear-seat occupant on number 15; never draw on the base plan" } ], "camera_recommendations": [ { "bg_id": "L11B04", "camera_height": "seated eye level, approximately 1.2m above the bus floor", "camera_position": "near number 2 at the front of the shared transit zone, facing diagonally down the aisle toward number 5 and the side window banks at numbers 3 and 4", "framing_notes": "Show several rows of seats, an adjacent window seat, and number 22 as a close foreground screen cue; exterior city lights belong outside the windows and not on the plan.", "ignore_numbered_elements": [ 23, 24, 25, 26, 27 ], "lens_hint": "28mm wide angle", "sub_location": "commuter_bus_cabin", "use_numbered_elements": [ 1, 2, 3, 4, 5, 22 ] }, { "bg_id": "L11B03", "camera_height": "seated eye level, approximately 1.2m above the bus floor", "camera_position": "beside number 5 at a window seat, facing closely toward number 3 while retaining part of the central aisle and neighboring seats", "framing_notes": "Keep number 23 confined to the reflective surface of number 3; do not depict the smoke form elsewhere in the cabin.", "ignore_numbered_elements": [ 22, 24, 25, 26, 27 ], "lens_hint": "50mm normal lens", "sub_location": "commuter_bus_window_seat", "use_numbered_elements": [ 1, 3, 4, 5, 23 ] }, { "bg_id": "L11B02", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "just inside number 8 in number 7, facing diagonally across number 6 toward numbers 10 and 11 with number 12 overhead", "framing_notes": "Use a broad view that preserves the entrance, central confrontation space, damaged anchor furniture, shattered fixture debris, and visible bloodstains.", "ignore_numbered_elements": [ 22, 23, 27 ], "lens_hint": "24mm wide angle", "sub_location": "residence_living_room", "use_numbered_elements": [ 6, 7, 8, 9, 10, 11, 12, 24, 25, 26 ] }, { "bg_id": "L11B01", "camera_height": "front-seat eye level, approximately 1.25m above the cabin floor", "camera_position": "near number 20, facing backward toward number 15 while keeping number 18 and the driver position within number 14 in the composition", "framing_notes": "Frame the rear bench prominently, retain a readable rearview-mirror sightline, and show number 27 only on the rear-seat occupant.", "ignore_numbered_elements": [ 22, 23, 24, 25, 26 ], "lens_hint": "32mm moderate wide angle", "sub_location": "older_suv_cabin", "use_numbered_elements": [ 13, 14, 15, 16, 17, 18, 19, 20, 21, 27 ] } ], "scale_guideline": "The residence module represents one interior level of a modest contemporary dwelling; the complete building storey count is not specified, while a typical ceiling height for this setting is roughly 2.3–2.6m. The commuter bus and older midsize SUV are single-level vehicles, typically about 10–12m long for the bus and 4.5–5m long for the SUV; their exact models and dimensions are not specified. The bus typically has continuous side window rows and one or two passenger doors, while the residence facade opening count beyond the shown entrance and window is unspecified.", "applied_shots": [ "S4_Shot1", "S4_Shot4", "S4_Shot8", "S12_Shot2", "S12_Shot10", "S15_Shot3", "S15_Shot5" ], "group_id": "bg_multifamily_residence", "depends_on_fp": [] }, "fp_old_suv_interior": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of an old midsize SUV cabin appropriate to a modern 2020s setting. Show an elongated vehicle cabin shell with the front at the top of the page and the rear cargo end at the bottom. Use clean architectural CAD-plan conventions, geometric shapes, single-weight black outlines, and a white or off-white background. Fill each distinct area with one solid flat pastel color used consistently: front shared zone pale yellow, rear passenger zone pale blue, center control zone pale cyan, door sill threshold zones pale beige, and rear cargo utility zone pale gray. Show two separate front seats, a three-place rear bench, a full-width dashboard, a steering wheel on the left side, and a narrow center console using simple top-down symbolic glyphs. Show four hinged side doors with clear swing lines and arcs, a broad front windshield, four side windows represented by double parallel lines, and a rear hatch with a rear window. Place one small circled black-number marker for each base element numbered 1 through 23, each number unique and appearing exactly once, positioned beside its corresponding area, seat, fixture, door, or window. Markers 24, 25, 26, and 27 are transient overlay references and must not appear anywhere in the diagram; do not draw the portable computer, CCTV imagery, smartphone, or message. Larger generic area text may identify only Front Shared Zone, Rear Passenger Zone, Control Zone, Threshold Zone, and Cargo Zone. Add no other words, captions, object labels, annotations, camera icons, viewing cones, or directional arrows except an optional small north arrow. Keep the drawing strictly flat and schematic. Do not use 3D, isometric, perspective, axonometric, depth, shadow, shading, gradients, blending, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, or decorative cinematic effects.", "key_elements": [ "Elongated old SUV cabin shell with a front engine-side boundary and rear cargo end", "Front shared seating zone, rear passenger zone, center control zone, threshold strips, and rear cargo zone in distinct flat pastel fills", "Driver seat, front passenger seat, and three-place rear bench shown as simple top-down seat glyphs", "Dashboard, steering wheel, and center console represented as fixed schematic fixtures", "Four hinged side doors, windshield, four side windows, rear hatch, and rear window", "Portable computer, CCTV content, smartphone, and message treated only as transient overlay markers and omitted from the base diagram", "No camera icons, field-of-view cones, event cues, or transient screens drawn on the floor plan" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "SUV cabin shell", "number": 1, "position_hint": "outer boundary enclosing the complete vehicle cabin" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "front shared zone", "number": 2, "position_hint": "front half of cabin around the two front seats" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear passenger zone", "number": 3, "position_hint": "middle cabin around the rear bench" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear cargo zone", "number": 4, "position_hint": "rear end behind the rear bench" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "center control zone", "number": 5, "position_hint": "longitudinal center strip between the front seats" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "door sill threshold zones", "number": 6, "position_hint": "narrow threshold strips beside the four side doors" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "driver seat", "number": 7, "position_hint": "front left side facing the windshield" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "front passenger seat", "number": 8, "position_hint": "front right side facing the windshield" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rear bench seat", "number": 9, "position_hint": "across the middle cabin behind the front seats" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "dashboard", "number": 10, "position_hint": "full width along the front interior boundary" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "steering wheel", "number": 11, "position_hint": "front left, attached to the driver side of the dashboard" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "center console", "number": 12, "position_hint": "between the driver and front passenger seats" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left front door", "number": 13, "position_hint": "left wall beside the driver seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right front door", "number": 14, "position_hint": "right wall beside the front passenger seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left rear door", "number": 15, "position_hint": "left wall beside the rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right rear door", "number": 16, "position_hint": "right wall beside the rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "windshield", "number": 17, "position_hint": "front boundary ahead of the dashboard" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left front side window", "number": 18, "position_hint": "within the left front door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right front side window", "number": 19, "position_hint": "within the right front door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "left rear side window", "number": 20, "position_hint": "within the left rear door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "right rear side window", "number": 21, "position_hint": "within the right rear door opening" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear hatch", "number": 22, "position_hint": "rear boundary behind the cargo zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear window", "number": 23, "position_hint": "within the upper portion of the rear hatch" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "portable computer", "number": 24, "position_hint": "temporarily open across the front passenger side and center console" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "CCTV investigative imagery", "number": 25, "position_hint": "confined to the portable computer display, showing recorded figures outside a residence" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "smartphone under review", "number": 26, "position_hint": "held above or resting beside the center console" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "island destination text message", "number": 27, "position_hint": "confined to the smartphone display, stating that the sender's mother went to her island hometown and the sender will follow" } ], "camera_recommendations": [ { "bg_id": "L13B04", "camera_height": "seated eye level, approximately 1.2m above the cabin floor", "camera_position": "near number 9 (rear bench seat), facing diagonally forward between number 7 (driver seat) and number 8 (front passenger seat) toward number 10 (dashboard), with number 24 (portable computer) and number 26 (smartphone) in the close foreground", "framing_notes": "Create a tight screen-lit investigative composition inside the cabin. Keep number 25 visible only within the portable computer screen and number 27 visible only within the smartphone screen; do not duplicate the recorded people or message elsewhere in the cabin.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "old_suv_cabin", "use_numbered_elements": [ 1, 2, 3, 5, 7, 8, 9, 10, 11, 12, 17, 18, 19, 24, 25, 26, 27 ] } ], "scale_guideline": "This is a single-level vehicle cabin within an old midsize SUV, typically about 1.7–1.9m in overall vehicle height; exact dimensions are not specified. Use a typical footprint range of roughly 4.5–5.0m long and 1.8–2.0m wide, with two front seats, a three-place rear bench, and a compact rear cargo section. The layout assumes the common configuration of four side doors, one rear hatch, a front windshield, four main side windows, and a rear window; these counts are typical rather than text-specified. There are no multi-storey or full-height architectural elements beyond the normal cabin roof and slightly raised door thresholds.", "applied_shots": [ "S16_Shot2", "S16_Shot4" ], "group_id": "bg_old_suv", "depends_on_fp": [] }, "fp_l15_main": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a small mid-2020s southwest Korean coastal powered fishing boat exterior deck. Show a narrow elongated hull footprint with a compact enclosed wheelhouse in the forward third, a broad open working deck behind it, and a dock-facing boarding point on the port aft side, following practical small-vessel geometry. Use clean architectural CAD-style geometry, single-weight black outlines, and a white or off-white background. This must be strictly flat 2D plan view: no 3D, no isometric, no perspective, no axonometric, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendering, no lighting effects, no textured surfaces, and no material rendering.\n\nApply single flat pastel solid fills with no blending: pale yellow for the Shared Zone of the open working deck, pale cyan for the Service Zone inside the wheelhouse, pale beige for the Threshold Zone at the port boarding point, and pale gray for the Utility Zone at the bow. These four short generic zone labels may appear inside their respective areas. Use no other text except the black numbers inside the numbered circles and an optional small north arrow marked N.\n\nDepict all fixtures using simple top-down symbolic plan glyphs. Place a small numbered circle exactly once for each of the following base elements: number 1 centered in the open working deck; number 2 centered inside the forward wheelhouse; number 3 in the port-side boarding threshold; number 4 in the narrow bow utility strip; number 5 at the aft-facing wheelhouse cabin door, drawn with a door leaf and swing arc; number 6 at the gated opening in the port safety railing; number 7 beside one representative segment of the continuous perimeter safety railing; number 8 at the port aft mooring cleat; number 9 at the starboard aft mooring cleat; number 10 on a fixed rectangular storage bench against the aft wheelhouse wall while keeping the door clear; number 11 at the forward wheelhouse windshield bank, drawn as parallel window lines in the wall; and number 12 at a grouped side-window bank, also drawn as parallel wall lines. Keep the aft working deck uncluttered for close-up blocking. Do not include people, vehicles, dock crowds, loose luggage, camera symbols, field-of-view cones, arrows other than the north arrow, event cues, or transient objects.", "key_elements": [ "Narrow open working deck behind a compact forward wheelhouse", "Port-side boarding threshold aligned with a gated break in the safety railing", "Aft-facing wheelhouse door opening directly onto the working deck", "Fixed storage bench against the aft wheelhouse wall", "Paired aft mooring cleats for dockside staging", "Flat pastel zoning for shared, service, threshold, and utility areas", "Numbered base markers with no characters or transient event cues" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "open working deck", "number": 1, "position_hint": "central and aft portion of the boat footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "wheelhouse service zone", "number": 2, "position_hint": "forward-central enclosed cabin footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "boarding threshold", "number": 3, "position_hint": "port-side aft edge beside the dock-facing rail opening" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "bow utility strip", "number": 4, "position_hint": "narrow forward zone ahead of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "wheelhouse cabin door", "number": 5, "position_hint": "aft wall of the wheelhouse, opening onto the working deck" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "boarding rail gate", "number": 6, "position_hint": "port perimeter railing at the boarding threshold" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "perimeter safety railing", "number": 7, "position_hint": "around exposed deck edges except at the boarding gate" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "port aft mooring cleat", "number": 8, "position_hint": "port aft corner near the boarding threshold" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "starboard aft mooring cleat", "number": 9, "position_hint": "starboard aft corner of the working deck" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "fixed storage bench", "number": 10, "position_hint": "against the aft wall of the wheelhouse, offset from the cabin door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front windshield bank", "number": 11, "position_hint": "forward wall of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "side window bank", "number": 12, "position_hint": "port and starboard wheelhouse walls, represented by one grouped marker" } ], "camera_recommendations": [ { "bg_id": "L15B01", "camera_height": "eye-level standing approximately 1.6m above the deck", "camera_position": "near number 3 (boarding threshold), facing diagonally across number 1 (open working deck) toward number 2 (wheelhouse), number 5 (cabin door), and number 10 (fixed storage bench)", "framing_notes": "Use restrained close framing suitable for tense dawn close-ups; retain the boarding edge, a short section of railing, and the aft wheelhouse wall as stable spatial anchors.", "ignore_numbered_elements": [], "lens_hint": "50mm normal lens", "sub_location": "fishing_boat_exterior_deck", "use_numbered_elements": [ 1, 2, 3, 5, 6, 7, 8, 10 ] } ], "scale_guideline": "The boat is a single-main-deck powered fishing vessel with one low wheelhouse; for this regional vessel type, the wheelhouse roof is typically about 2–3 m above the working deck, though the text gives no exact height. A conservative typical footprint is roughly 8–12 m long with a 3–4 m beam, with the wheelhouse occupying the forward third and an open working deck behind it. The plan uses a typical single aft-facing wheelhouse door, a forward windshield bank, side window banks, and a deck-level boarding gate; exact opening counts are not specified in the text.", "applied_shots": [ "S18_Shot1", "S18_Shot5" ], "group_id": "bg_fishing_boat", "depends_on_fp": [] }, "fp_l18_restaurant_interior": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a compact contemporary coastal seafood restaurant. Use clean architectural plan geometry, uniform single-weight black outlines, an off-white background, and simple symbolic furniture and fixture glyphs. Organize the plan with number 1 as a pale yellow Shared Zone occupying the center and sea-facing half, number 2 as a pale cyan Service Zone across the rear, number 3 as a pale beige Threshold Zone at the landward customer entrance, and number 14 as a narrow pale gray Exterior Zone beyond the sea-facing wall. Use only solid pastel area fills with crisp boundaries. Show number 4 as a customer entrance door with a conventional door leaf and swing arc, number 5 as a broad multi-panel window bank represented by double parallel lines in the sea-facing wall, and number 6 as a service doorway connecting the dining and service zones. Place number 7 as a simple rectangular dining table beside number 5 and number 8 as four compact top-down chair rectangles arranged around it, leaving a clear aisle to the entrance and service counter. Place number 9 as a long rectangular fixed service counter along the dining and service boundary, number 10 as a standard plan-symbol preparation sink against the rear wall, and number 11 as a rectangular refrigerator glyph in the rear corner. Mark every base element from number 1 through number 11 and number 14 with one small circle containing its unique black number, each appearing exactly once. Do not place markers 12 or 13 because they are transient scene-overlay objects. The only words permitted inside the diagram are the generic area labels Shared Zone, Service Zone, Threshold Zone, and Exterior Zone, plus an optional small north arrow. Keep all other identification exclusively numerical.", "key_elements": [ "Compact contemporary coastal restaurant layout", "Shared dining zone with clear circulation around tables", "Window-side table positioned beside a broad sea-facing window bank", "Rear service zone with counter, preparation sink, refrigerator, and kitchen doorway", "Customer entrance with a small threshold zone", "Narrow exterior orientation strip indicating the sea view", "Transient smartphone evidence and drinking items excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared dining zone", "number": 1, "position_hint": "center and sea-facing side of the restaurant interior" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "service zone", "number": 2, "position_hint": "rear side of the restaurant behind the service counter" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 3, "position_hint": "inside the customer entrance at the landward corner" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "customer entrance door", "number": 4, "position_hint": "landward exterior wall beside the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "sea-facing window bank", "number": 5, "position_hint": "long exterior wall facing the sea-view strip" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "kitchen service doorway", "number": 6, "position_hint": "partition between the dining and service zones" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "window-side dining table", "number": 7, "position_hint": "shared dining zone directly beside the sea-facing windows" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "dining chair set", "number": 8, "position_hint": "arranged around the window-side dining table" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "service counter", "number": 9, "position_hint": "along the boundary between shared dining and service zones" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "preparation sink", "number": 10, "position_hint": "rear wall of the service zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "refrigerator", "number": 11, "position_hint": "rear corner of the service zone near the kitchen doorway" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "smartphone displaying CCTV still", "number": 12, "position_hint": "on the window-side dining table during the evidence inspection" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "bottle and drinking glasses", "number": 13, "position_hint": "distributed around the window-side dining table during the night conversation" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior sea-view strip", "number": 14, "position_hint": "outside the sea-facing window wall" } ], "camera_recommendations": [ { "bg_id": "L18B05", "camera_height": "seated eye level, approximately 1.2m", "camera_position": "near number 9 (service counter), facing diagonally across number 1 (shared dining zone) toward number 7 (window-side dining table), number 5 (sea-facing window bank), and number 14 (exterior sea-view strip)", "framing_notes": "Place number 12 prominently on number 7 in the near foreground so the phone screen can be inspected by three seated people. Include number 13 around the table, retain the dark sea view through number 5, and keep the service counter as a subdued background anchor.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "restaurant_interior", "use_numbered_elements": [ 1, 5, 7, 8, 9, 12, 13, 14 ] } ], "scale_guideline": "Treat the restaurant as a single-level interior within a small coastal commercial building; one to two storeys and a roughly 2.7 to 3.3 metre restaurant storey height are typical for this setting, but the total building height is not specified in the text. A compact footprint of roughly 80 to 180 square metres is typical, with the dining room occupying most of the unit and a shallower rear service band. The sea-facing facade should use a broad bank of typically two to four window panels, while customer and service circulation remain on the landward and rear sides; no major vertical circulation is required within this floor plan scope.", "applied_shots": [ "S49_Shot6", "S49_Shot8" ], "group_id": "bg_restaurant_property", "depends_on_fp": [] }, "fp_l23_backyard": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact modern rural island restaurant backyard. Show the rear edge of a modest restaurant along the south side, a rear door opening into a narrow threshold, a central enclosed utility yard, a distinct outdoor work area, and a detached rectangular storage shed along the north side. Connect the yard to one side path toward the village road and a second outward path that turns uphill toward the forest. Use layout conventions appropriate to a contemporary remote coastal community: compact practical spacing, an older detached utility shed, direct service access from the restaurant, and narrow pedestrian paths rather than urban driveways. Inside the shed, show simple top-down perimeter storage-rack glyphs along the side and rear walls while preserving a clear central aisle from the inward-swinging shed door. Use standard plan symbols: doors as a line and swing arc, walls as clean uniform outlines, racks as plain narrow rectangles, and paths as simple bounded shapes. Fill each area with one solid flat pastel color: restaurant rear block pale yellow, backyard utility yard pale green, outdoor work area pale cyan, storage shed pale blue, threshold strip pale beige, and outward paths pale gray. Colors must be consistent, with no blending. Place small circular black-number markers exactly once for base elements 1 through 10 only: 1 restaurant rear block, 2 restaurant rear door, 3 backyard utility yard, 4 outdoor work area, 5 storage shed, 6 storage shed door, 7 perimeter storage racks, 8 village path, 9 forest approach path, and 10 rear threshold strip. Do not draw markers 11 through 17 and do not depict the temporary altar, candles, goat head, blood bowl, old spear, ritual ornaments, blood, smoke, fire, or lurking silhouette; these are transient overlay content. Minimal text only: optional generic area labels such as Shared Zone, Utility Zone, Work Zone, Storage Zone, Threshold Zone and Path Zone, plus an optional small north arrow. No other labels or annotations. Use single-weight black outlines on a white or off-white background and geometric shapes only. Strictly flat 2D plan view, not 3D, not isometric, not perspective, not axonometric. No depth, shadow, shading, gradient, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, material rendering, decorative illustration, camera symbols, field-of-view cones or directional camera arrows.", "key_elements": [ "Rear edge of a rural island restaurant", "Restaurant rear door opening into the backyard", "Compact enclosed backyard utility space", "Outdoor work area", "Detached storage shed", "Single inward-opening storage shed door", "Perimeter storage racks inside the shed", "Two outward paths toward the village road and rising forest route", "Temporary hidden altar state inside the shed", "Undetermined silhouette in a rear wall-ceiling corner" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "restaurant rear block", "number": 1, "position_hint": "south edge of the site, forming the backyard boundary" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "restaurant rear door", "number": 2, "position_hint": "south boundary, opening from the restaurant rear block into the backyard" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "backyard utility yard", "number": 3, "position_hint": "central exterior area between the restaurant and storage shed" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "outdoor work area", "number": 4, "position_hint": "one side of the central backyard, clear of the main walking route" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage shed", "number": 5, "position_hint": "north side of the backyard, opposite the restaurant rear block" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "storage shed door", "number": 6, "position_hint": "south wall of the storage shed, facing the backyard" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "perimeter storage racks", "number": 7, "position_hint": "along the side and rear walls inside the storage shed" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "village path", "number": 8, "position_hint": "side exit from the backyard leading toward the settlement road" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "forest approach path", "number": 9, "position_hint": "outer uphill route continuing from the backyard toward the forest" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear threshold strip", "number": 10, "position_hint": "narrow transition area immediately outside the restaurant rear door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "temporary altar", "number": 11, "position_hint": "deep inside the storage shed against the rear wall" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "candle cluster", "number": 12, "position_hint": "surrounding and illuminating the temporary altar" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "black goat head", "number": 13, "position_hint": "centered on top of the temporary altar" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "blood-filled bowl", "number": 14, "position_hint": "in front of the goat head on the temporary altar" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "old horn-tipped spear", "number": 15, "position_hint": "laid lengthwise above the goat head on the temporary altar" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "incense and strange ritual ornaments", "number": 16, "position_hint": "distributed across and immediately around the temporary altar" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "lurking ceiling-corner silhouette", "number": 17, "position_hint": "rear wall-ceiling corner behind the shed entrance viewpoint" } ], "camera_recommendations": [ { "bg_id": "L23B03", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just inside number 6 (storage shed door), facing diagonally across number 5 (storage shed) toward number 11 (temporary altar), with number 7 (perimeter storage racks) along the side walls", "framing_notes": "Frame number 11 centrally with numbers 12 through 16 clustered around it; retain number 6 behind or at the near edge of frame and place number 17 high in a rear wall-ceiling corner as an indistinct lurking silhouette.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "storage_shed_interior", "use_numbered_elements": [ 5, 6, 7, 11, 12, 13, 14, 15, 16, 17 ] } ], "scale_guideline": "The restaurant is likely a low one- or two-storey rural island building, typical for this setting; its exact storey count and height are not specified. The detached storage shed should remain a compact single-storey utility structure, clearly smaller than the restaurant rear block, with a typical modest shed ceiling rather than a tall industrial volume. The confirmed site openings are one restaurant rear door and one storage shed door; no window count is established. The backyard is compact enough for the restaurant door, work area, shed and outward paths to remain visually connected.", "applied_shots": [ "S27_Shot2", "S27_Shot5" ], "group_id": "bg_restaurant_property", "depends_on_fp": [] }, "fp_l30_back_room": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan diagram of a compact contemporary rural island restaurant back room that can also function as an enclosed holding chamber. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric shapes only, and a clear orthographic plan view. Absolutely no 3D, isometric, perspective, axonometric view, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, or material rendering. Show one compact rectangular room with thick masonry or concrete perimeter walls represented only by simple black wall lines; the inner wall line may be slightly irregular and angular to communicate rough construction without texture. Divide the floor into three solid flat pastel areas with hard boundaries: a pale beige Threshold Zone immediately inside the south access door, a pale cyan Service Zone around the west, north, and east storage perimeter, and a pale blue Private Zone across the clear central and north-central holding area. Use each color consistently with no blending, gradients, or shadows. Add only these large generic area labels: Threshold Zone, Service Zone, Private Zone. Show a single inward-swinging service door in the south wall using a standard door leaf and swing arc. Show fixed north-wall shelving, a west-wall restaurant supply rack, and an east-wall fishing-gear rack as simple top-down rectangles with shelf divisions. Keep the center mostly open. Indicate one low ceiling bulb with a minimal plan fixture symbol at the center and two small fixed wall-ring symbols at opposing north and south holding positions. Place small black-outlined white circle markers with black numbers exactly once as follows: 1 inside the southwest part of the enclosed room footprint, 2 in the threshold strip, 3 in the perimeter storage zone, 4 in the central holding zone, 5 at the south access door, 6 on the north shelving, 7 on the west supply rack, 8 on the east fishing-gear rack, 9 at the central bulb fixture, 10 at the north wall anchor ring, and 11 at the south wall anchor ring east of the door. Marker 12 is overlay-only and must not be drawn. Do not draw people, captives, chains, an altar, candles, ritual decorations, blood, weapons, wall marks, floor trails, loose displaced objects, camera icons, field-of-view cones, dimensions, legends, annotations, or any text other than the three permitted zone labels and the numbered circles. Furniture and fixtures must remain simple symbolic top-down plan glyphs.", "key_elements": [ "Compact single-room utility footprint with thick rough masonry or concrete walls", "One inward-swinging service access door on the south wall", "Peripheral shelving and racks for restaurant stock and fishing equipment", "Clear central holding area beneath a single low ceiling bulb", "Two fixed wall anchor rings defining opposing holding positions", "Three flat color-coded areas: threshold, service storage, and private holding zone", "Overlay-only chained captive marker excluded from the base diagram", "No altar, candles, ritual objects, blood, weapons, or ritual traces" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "enclosed back room", "number": 1, "position_hint": "inside the southwest part of the overall room footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "threshold zone", "number": 2, "position_hint": "south-central strip immediately inside the access door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage service zone", "number": 3, "position_hint": "perimeter zone along the west, north and east walls" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central holding zone", "number": 4, "position_hint": "open central and north-central floor area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "service access door", "number": 5, "position_hint": "south wall, opening inward toward the southeast" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "fixed stock shelving", "number": 6, "position_hint": "against the north wall, offset toward the northeast" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "restaurant supply rack", "number": 7, "position_hint": "against the west wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "fishing gear rack", "number": 8, "position_hint": "against the east wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "low ceiling bulb", "number": 9, "position_hint": "centered above the open holding zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "north wall anchor ring", "number": 10, "position_hint": "low on the north wall beside the central holding position" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "opposite wall anchor ring", "number": 11, "position_hint": "low on the south wall, east of the access door" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "chained captive", "number": 12, "position_hint": "on the floor near the north wall anchor ring" } ], "camera_recommendations": [ { "bg_id": "L30B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 5 (access door), facing diagonally across number 3 (storage zone) toward number 6 (north shelving) and number 8 (fishing-gear rack)", "framing_notes": "Show the ordinary daylit utility arrangement, with the open central floor and peripheral storage clearly visible. Depict no altar, candles, ritual objects, blood, weapons, or captive.", "ignore_numbered_elements": [ 12 ], "lens_hint": "28mm wide angle", "sub_location": "restaurant_back_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ] }, { "bg_id": "L30B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just inside number 5 (access door), facing toward number 10 (north wall anchor ring) and number 12 (chained captive), with number 9 (low bulb) overhead and number 11 (opposite anchor ring) near the frame edge", "framing_notes": "Keep the chamber enclosed and sparse, emphasize the captive beneath the low bulb, and allow peripheral storage fixtures to fall outside the main framing or into darkness.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "holding_chamber", "use_numbered_elements": [ 1, 2, 4, 5, 9, 10, 11, 12 ] } ], "scale_guideline": "Treat this as a single ground-level utility room or small attached outbuilding; the larger restaurant's storey count is not specified. A compact footprint roughly four to six meters per side and a typical utility-room ceiling height of about 2.4 to 3 meters are conservative for this contemporary remote coastal setting. The plan establishes one exterior access door and no confirmed windows; the ceiling bulb hangs low but remains within the single-storey room volume.", "applied_shots": [ "S37_Shot4", "S37_Shot5", "S37_Shot10", "S51_Shot2", "S51_Shot7" ], "group_id": "bg_restaurant_property", "depends_on_fp": [] }, "fp_l53_restaurant_front": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a modest contemporary restaurant front in a remote coastal island community. Show a unified rectangular footprint with an open forecourt along the south, a simple restaurant shared zone across the north interior, and a compact enclosed threshold room centered between the front entrance and the shared zone. Use a conservative modern rural layout with thick but single-weight black wall outlines, simple geometry, and sparse openings. Fill each area with one consistent flat pastel solid color: forecourt and exterior utility area pale gray, restaurant shared zone pale yellow, enclosed threshold zone pale beige. Use no gradients, blending, or shadows. Draw the main exterior entrance in the center of the south facade with a standard door leaf and swing arc, an inner doorway in the north wall of the threshold room, and two facade windows flanking the entrance using double parallel wall lines. Give the enclosed threshold room slightly irregular wall geometry to communicate rough construction without texture, shading, or material rendering. Add two simple fixed wall-restraint anchor glyphs on opposite west and east walls of the enclosed threshold room. Place small circular markers with black numbers exactly once as follows: 1 centered in the forecourt, 2 centered in the restaurant shared zone, 3 centered in the enclosed threshold room, 4 at the exterior entrance, 5 at the inner doorway, 6 at the west facade window, 7 at the east facade window, 8 at the west wall restraint anchor, and 9 at the east wall restraint anchor. Do not draw marker 10, captives, injuries, chains attached to people, or any other transient event cue; marker 10 belongs only to a separate state overlay. Larger generic area labels may read Forecourt, Shared Zone, and Threshold Zone. Include only a small north arrow with N in one corner. Do not include any other labels, annotations, camera icons, field-of-view cones, arrows, people, vehicles, loose props, or decorative imagery. Strictly flat 2D plan view only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered lighting, no textured surfaces, and no material rendering. The result must resemble a clean CAD plan or simple room-layout sketch on a white or off-white background.", "key_elements": [ "Unified front footprint of a modest contemporary island restaurant", "Open forecourt along the south side", "Simple restaurant shared zone behind the front facade", "Enclosed rough-walled threshold room between exterior and shared zone", "Single exterior entrance and single inner doorway", "Two front facade windows", "Opposed wall-mounted restraint anchor assemblies", "Transient placement of two injured captives chained apart" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "forecourt", "number": 1, "position_hint": "south of the restaurant facade across the full frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "restaurant shared zone", "number": 2, "position_hint": "north half of the footprint behind the enclosed threshold room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "enclosed threshold room", "number": 3, "position_hint": "south-central interior between the exterior entrance and restaurant shared zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main exterior entrance", "number": 4, "position_hint": "center of the south facade, opening inward into the enclosed threshold room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "inner doorway", "number": 5, "position_hint": "north wall of the enclosed threshold room, connecting to the restaurant shared zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west facade window", "number": 6, "position_hint": "south facade west of the main exterior entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east facade window", "number": 7, "position_hint": "south facade east of the main exterior entrance" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "west wall restraint anchor", "number": 8, "position_hint": "west wall of the enclosed threshold room" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "east wall restraint anchor", "number": 9, "position_hint": "east wall of the enclosed threshold room, opposite number 8" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "two injured captives chained apart", "number": 10, "position_hint": "one captive at number 8 and the other at number 9, separated across the enclosed threshold room" } ], "camera_recommendations": [ { "bg_id": "L53B01", "camera_height": "eye-level seated-to-standing transition, approximately 1.3–1.5m", "camera_position": "inside number 3 near number 4, facing diagonally across the room so number 8 and number 9 appear on opposite walls, with number 5 in the deeper background", "framing_notes": "Emphasize the separation between the two wall restraints and depict number 10 as two injured captives chained apart. Keep the exterior forecourt and restaurant shared zone outside the frame.", "ignore_numbered_elements": [ 1, 2, 6, 7 ], "lens_hint": "28mm wide angle", "sub_location": "enclosed_threshold_zone", "use_numbered_elements": [ 3, 4, 5, 8, 9, 10 ] } ], "scale_guideline": "A modest one-storey frontage is typical for this remote coastal restaurant type; the storey count and height are not specified in the text. Treat the footprint as a small-to-medium rural restaurant, typically about 8–14 m across the frontage, with compact rooms and a ceiling height typical of an older modern commercial building. Keep facade openings sparse and human-scaled, with no multi-storey stair, tower, tank, or other major vertical element indicated within this plan scope.", "applied_shots": [ "S94_Shot2", "S94_Shot7" ], "group_id": "bg_restaurant_property", "depends_on_fp": [] }, "fp_l22_cave_entrance": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan diagram of a single natural cave-mouth space on a remote coastal island. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric plan symbols, and irregular but clearly legible natural rock-wall boundaries. Use only flat solid pastel area fills: pale gray for the Exterior Zone south of the cave, pale beige for the Threshold Zone immediately inside the mouth, pale yellow for the Main Zone occupying the broad central chamber, and pale blue for the Private Zone formed by a recessed northeast alcove. Show a wide irregular cave-mouth opening in the south wall, a narrowing threshold, a broader uneven chamber, a recessed captive alcove in the northeast corner, and a narrow inner passage opening centered toward the north wall. Place a simple top-down fixed iron wall-ring and short chain-attachment glyph on the inner wall of the alcove. Draw small circular markers with black numbers 1 through 7, each appearing exactly once: 1 in the exterior approach, 2 at the cave-mouth opening, 3 in the threshold, 4 in the main chamber, 5 in the alcove, 6 at the inner passage opening, and 7 beside the fixed chain anchor. Do not draw markers 8 or 9, human remains, a captive, blood, bats, flashlights, people, or any other transient event cue. Area text may consist only of the generic labels Exterior Zone, Threshold Zone, Main Zone, and Private Zone; include no other words or annotations. A small north arrow may appear in one corner. Keep the image strictly flat and diagrammatic: no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, texture, material rendering, decorative illustration, camera icons, field-of-view cones, or motion arrows.", "key_elements": [ "Irregular natural cave mouth and exterior approach", "Narrow threshold leading into a broader chamber", "Main cave chamber with an uneven but traversable floor", "Recessed captive alcove in a dark corner", "Inner passage continuing deeper into the cave", "Fixed iron chain anchor in the alcove", "Human remains distributed across the floor as a transient overlay", "Chained captive position as a transient overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior approach", "number": 1, "position_hint": "south edge outside the cave mouth" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "cave mouth opening", "number": 2, "position_hint": "south wall gap between the exterior approach and threshold" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "cave threshold", "number": 3, "position_hint": "just inside the cave mouth at the south end" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main cave chamber", "number": 4, "position_hint": "broad central portion of the cave interior" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "captive alcove", "number": 5, "position_hint": "recessed northeast corner of the main chamber" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "inner passage opening", "number": 6, "position_hint": "narrow opening in the north wall leading deeper into the cave" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "iron chain anchor", "number": 7, "position_hint": "inner wall of the northeast captive alcove" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "bone-strewn floor", "number": 8, "position_hint": "scattered densely across most of the main chamber floor" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "chained captive", "number": 9, "position_hint": "crouched on the floor of the northeast alcove beside the chain anchor" } ], "camera_recommendations": [ { "bg_id": "L22B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 3 (cave threshold), facing diagonally across number 4 (main chamber) toward number 5 (captive alcove), number 7 (chain anchor), and number 6 (inner passage opening)", "framing_notes": "Show the floor associated with number 8 prominently across the foreground and middle ground, with number 9 low in the dark alcove beside number 7. Keep the irregular cave walls and inner passage visible while excluding the exterior approach behind the camera.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "cave_entrance_space", "use_numbered_elements": [ 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "This is one natural, single-level cave-mouth chamber rather than a multistorey building; its height is unspecified, with a variable ceiling of several metres typical for a walkable coastal cave and enough overhead volume for a large bat roost. The footprint should read as a small hall, typically about 8–15 m from the mouth to the inner passage and about 5–10 m wide, though no dimensions are stated in the text. The space has one exterior cave mouth and one inner continuation opening at roughly the same level, with no windows, constructed doors, stairs, parapets, or other vertical circulation indicated.", "applied_shots": [ "S71_Shot2", "S71_Shot14", "S71_Shot18" ], "group_id": "bg_forest_cave", "depends_on_fp": [] }, "fp_l35_cave_interior": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan diagram of a single irregular natural cave chamber in a remote modern island setting. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, simple geometric plan symbols, and no decorative illustration. Divide the layout into three clearly readable flat-color areas: number 1, the broad main chamber or Shared Zone, filled pale yellow; number 2, the narrow southeast entry passage or Threshold Zone, filled pale beige; and number 3, the recessed northwest restraint area or Restraint Zone, filled pale blue. Show number 4 as the open transition where the narrow passage widens into the chamber, using a simple break in the cave boundary rather than a hinged door. Show two fixed iron chain restraint fixtures, numbers 5 and 6, spaced along the low northwest and west cave wall of the restraint area, represented by small wall-ring symbols with short schematic chain lines. Keep a clear walking route from the southeast passage opening to the restraint area. Represent the dark stone floor only through the zone fills and boundary geometry, with no stone texture, cracks, blood, bones, debris, or surface rendering. Place one small circular black-number marker for each visible base element, numbers 1 through 6, each appearing exactly once. Number 7 is a transient carried lantern overlay cue and must not be drawn on this base floor plan. The only permitted text inside the diagram is the generic area labels Shared Zone, Threshold Zone, and Restraint Zone, plus the numbered circles and an optional small north arrow. Do not draw people, prisoners, lantern light, camera icons, view cones, arrows, or event-state cues. Strictly flat 2D only: no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering. Use solid pastel fills only, with no blending and no drop shadows.", "key_elements": [ "Irregular single cave chamber", "Narrow entry passage and chamber opening", "Defined restraint area along the far cave wall", "Two fixed iron chain restraint points", "Unobstructed lantern approach route", "Dark stone floor represented without texture", "Carried lantern reserved for the transient overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main cave chamber", "number": 1, "position_hint": "central and eastern portion of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry passage", "number": 2, "position_hint": "narrow route entering from the southeast edge" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "restraint area", "number": 3, "position_hint": "recessed area against the northwest cave wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "passage opening", "number": 4, "position_hint": "southeast side of the chamber where the entry passage widens" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "first iron chain restraint", "number": 5, "position_hint": "low against the west wall within the restraint area" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "second iron chain restraint", "number": 6, "position_hint": "low against the northwest wall beside the first restraint" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "carried lantern", "number": 7, "position_hint": "on the entry route near the passage opening, approaching the restrained occupants" } ], "camera_recommendations": [ { "bg_id": "L35B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 4 (passage opening), facing diagonally across number 1 (main chamber) toward number 3 (restraint area), with numbers 5 and 6 along the far cave wall", "framing_notes": "Show the entry-side lantern at number 7 illuminating the two fixed restraint points at numbers 5 and 6; preserve substantial dark cave space around the restraint area.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "cave_interior_chamber", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ] } ], "scale_guideline": "The plan covers a single-level natural cave chamber; its ceiling height is unspecified and should remain irregular, typically about 2–4 m for a walkable chamber of this kind. The footprint is a compact chamber large enough for two restrained occupants and an approaching visitor, with one narrow entry passage; exact dimensions are not specified. The restraint fixtures are low wall or floor-edge anchors and do not imply another level.", "applied_shots": [ "S96_Shot1", "S96_Shot4", "S98_Shot2", "S98_Shot5", "S98_Shot6" ], "group_id": "bg_forest_cave", "depends_on_fp": [] }, "fp_l25_goat_shed": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan diagram of a compact mid-2020s rural island utility shed used for animal slaughter and storage. Use a simple elongated rectangular footprint with rough but clearly rectilinear timber perimeter walls, reflecting an improvised coastal agricultural outbuilding rather than an urban industrial facility. Divide the interior into a large western and central Work Zone and a smaller enclosed eastern Storage Zone, with a narrow exterior Threshold Zone along the west side. Fill the Work Zone with one solid pale yellow pastel fill, the Storage Zone with one solid pale cyan pastel fill, and the exterior Threshold Zone with one solid pale gray fill; use each color consistently with no blending. Show a broken viewing window in the west wall as a standard top-down double-line window symbol with a small interrupted section, an inward-swinging exterior access door in the south wall, and a single hinged connecting door in the partition between the work area and storage bay. In the work area, show a central rectangular slaughter table, a simple blood-collection bucket station beside it, a narrow wall-mounted knife and tool rack on the north wall, and a separate linear hanging-hook rail near the storage partition. Keep the storage bay structurally clear so transient sacks and remains can be added later as an overlay. Use single-weight black outlines on a white or off-white background and geometric architectural symbols only. Place small circular markers with black numbers 1 through 10 exactly once at their corresponding areas, openings, fixtures, and furniture. Do not draw markers 11, 12, 13, or 14, and do not depict blood, bodies, sacks, victims, occupants, door-state cues, or any other transient event content in this base diagram. The only permitted interior words are the larger generic area labels Work Zone, Storage Zone, and Threshold Zone; a small north arrow with N is allowed. Include no legend, object names, captions, dimensions, camera icons, view cones, or other text. This must look like a clean architectural CAD plan or simple room-layout sketch, not artwork. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Compact rectangular rural utility shed divided into a larger slaughter work area and a smaller enclosed storage bay", "Broken exterior viewing window positioned beside the main work area", "Single internal doorway connecting the work area and storage bay", "Central slaughter table with nearby blood-collection station", "Wall-mounted knife and tool rack plus a separate hanging-hook rail", "Simple exterior access door and narrow outdoor observation threshold", "Transient blood traces, sacks, remains, and door-state cues excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "slaughter work area", "number": 1, "position_hint": "western and central two-thirds of the shed footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage bay", "number": 2, "position_hint": "enclosed eastern end of the shed footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior observation threshold", "number": 3, "position_hint": "narrow exterior strip along the west wall beside the viewing window" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "broken viewing window", "number": 4, "position_hint": "west exterior wall of the slaughter work area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "storage connecting door", "number": 5, "position_hint": "partition wall between the slaughter work area and storage bay" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior access door", "number": 6, "position_hint": "south wall near the southeast side of the slaughter work area" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "slaughter table", "number": 7, "position_hint": "center of the slaughter work area with circulation space on all sides" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "wall tool rack", "number": 8, "position_hint": "north wall of the slaughter work area opposite the exterior access door" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "hanging hook rail", "number": 9, "position_hint": "north wall near the storage partition, adjacent to the tool rack" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "blood collection station", "number": 10, "position_hint": "beside the eastern end of the slaughter table" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "fresh blood traces", "number": 11, "position_hint": "slaughter table, nearby floor, and surrounding work-area wall surfaces" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "blood-soaked sacks and severed remains", "number": 12, "position_hint": "storage-bay floor and rear corner" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "opened sack and active slaughter subject", "number": 13, "position_hint": "on and immediately beside the central slaughter table at night" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "opening", "label": "closed storage door state", "number": 14, "position_hint": "at the connecting doorway, concealing the storage bay from the work area" } ], "camera_recommendations": [ { "bg_id": "L25B03", "camera_height": "eye-level crouching ~1.3m outside the window", "camera_position": "outside near number 4 (broken viewing window), facing diagonally into number 1 (slaughter work area) toward number 7 (slaughter table), number 8 (tool rack), and number 9 (hook rail)", "framing_notes": "Use the broken window frame as the foreground boundary; keep the central work surface and wall-mounted tools clearly visible while excluding the storage-bay contents.", "ignore_numbered_elements": [ 12, 14 ], "lens_hint": "35mm moderate wide angle", "sub_location": "broken_window_observation", "use_numbered_elements": [ 1, 3, 4, 7, 8, 9, 10, 11, 13 ] }, { "bg_id": "L25B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "inside number 2 (storage bay), facing diagonally toward number 5 (connecting door) with the storage floor and rear corner in view", "framing_notes": "Keep the closed connecting door prominent and leave enough foreground floor area for the blood-soaked sacks and spilled remains; the main work area should remain concealed beyond the door.", "ignore_numbered_elements": [ 13 ], "lens_hint": "28mm wide angle", "sub_location": "storage_bay", "use_numbered_elements": [ 2, 5, 12, 14 ] } ], "scale_guideline": "This is a compact single-storey rural utility outbuilding; an overall height of roughly 3–4 m and a footprint of about 50–100 square metres are typical for this building type, since exact dimensions are not specified. The plan includes one broken exterior viewing window, one exterior access door, and one internal connecting door. There are no indicated stairs or other multi-storey vertical elements, and the wall-mounted rails remain within normal single-storey working height.", "applied_shots": [ "S32_Shot1", "S32_Shot10", "S32_Shot13", "S59_Shot6", "S59_Shot12", "S59_Shot16" ], "group_id": "bg_forest_slaughter_complex", "depends_on_fp": [] }, "fp_l26_approach": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic floor plan diagram of a remote forest-road approach connected to a makeshift modern rural slaughter shed. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only. This must be strictly flat 2D: no 3D, no isometric view, no perspective, no axonometric view, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering. Show a narrow irregular footpath entering from the southwest forest-road edge and leading to a small threshold on the south side of a roughly built rectangular wooden shed. Inside the shed, show one large service staging bay and a smaller enclosed storage room along the north side, reflecting a compact utility outbuilding on a remote 2020s island with limited infrastructure. Use flat solid pastel area fills without blending: forest-road exterior as pale gray-green labeled Utility Zone, narrow path as pale sage labeled Approach Zone, entry landing as pale beige labeled Threshold Zone, main staging bay as pale cyan labeled Service Zone, and storage room as pale blue-gray labeled Storage Zone. Draw a simple hinged exterior door with a swing arc on the south wall, a broken viewing window as a double parallel wall line on the west wall, and a hinged internal storage door with a swing arc. Draw a central slaughter table as a plain top-down rectangle, a wall-mounted knife rack as a narrow fixed strip with small geometric tool slots on the east wall, and a hanging-hook rail as a straight symbolic overhead rail near the north partition. Place small circular black-number markers exactly once for base elements 1 through 12: 1 forest-road edge, 2 narrow forest path, 3 entry threshold, 4 dark staging bay, 5 makeshift shed shell, 6 storage room, 7 exterior entrance door, 8 broken viewing window, 9 storage room door, 10 slaughter table, 11 wall-mounted knife rack, and 12 hanging hook rail. Do not draw markers 13, 14, or 15 and do not depict any people, transformations, blood buckets, blood coating, attacks, bodies, trails, stains, or other transient event cues. Inside the drawing use only the permitted generic zone labels, the numbered circles, and an optional small north arrow marked N; include no other text, legends, camera icons, field-of-view cones, arrows, annotations, or proper nouns.", "key_elements": [ "Remote forest-road edge and narrow footpath", "Makeshift wooden slaughter shed footprint", "Small exterior entry threshold", "Dark service staging bay", "Connected storage room", "Broken exterior window used for viewing inside", "Simple entrance door and internal storage door", "Central slaughter table", "Wall-mounted knife rack", "Overhead hanging-hook rail", "Transient path-blocking transformation cue excluded from the base diagram", "Transient goat-blood buckets and blood-disguise state excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "forest-road edge", "number": 1, "position_hint": "west and south exterior around the approach path" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "narrow forest path", "number": 2, "position_hint": "runs from southwest forest edge toward the shed threshold" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry threshold", "number": 3, "position_hint": "small exterior landing at the south side of the shed" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "dark staging bay", "number": 4, "position_hint": "main interior service area occupying most of the shed" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "makeshift wooden shed", "number": 5, "position_hint": "rectangular building shell at the northeast end of the path" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage room", "number": 6, "position_hint": "small enclosed room along the north side of the staging bay" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior entrance door", "number": 7, "position_hint": "south wall between the threshold and staging bay" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "broken viewing window", "number": 8, "position_hint": "west wall of the staging bay beside the exterior approach" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "storage room door", "number": 9, "position_hint": "north interior partition connecting the staging bay to storage" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "slaughter table", "number": 10, "position_hint": "center of the staging bay with circulation space around it" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "wall-mounted knife rack", "number": 11, "position_hint": "east wall of the staging bay" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "hanging hook rail", "number": 12, "position_hint": "north-central side of the staging bay near the storage partition" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "path-blocking transformed figure", "number": 13, "position_hint": "middle of the narrow forest path, blocking forward movement" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "goat-blood buckets", "number": 14, "position_hint": "temporary cluster on the staging bay floor beside the slaughter table" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "blood-drenching disguise state", "number": 15, "position_hint": "open standing area beside the temporary blood buckets in the staging bay" } ], "camera_recommendations": [ { "bg_id": "L26B02", "camera_height": "eye-level standing ~1.6m", "camera_position": "on number 2 (narrow forest path), facing toward number 13 (path-blocking transformed figure), with number 1 (forest-road edge) surrounding the path", "framing_notes": "Keep the path narrow and enclosed by vegetation, with number 13 fully blocking the forward route; the slaughter shed need not be visible.", "ignore_numbered_elements": [ 14, 15 ], "lens_hint": "35mm wide angle", "sub_location": "night_forest_approach", "use_numbered_elements": [ 1, 2, 13 ] }, { "bg_id": "L26B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "inside number 4 (dark staging bay), facing diagonally across number 10 (slaughter table) toward number 11 (wall-mounted knife rack) and number 12 (hanging hook rail)", "framing_notes": "Include number 14 in the near foreground and leave open standing space around number 15; keep number 8 and number 9 visible in the darker background.", "ignore_numbered_elements": [ 13 ], "lens_hint": "28mm wide angle", "sub_location": "dark_slaughter_staging_bay", "use_numbered_elements": [ 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 ] } ], "scale_guideline": "Treat the makeshift shed as a single-storey outbuilding, typical for this building type; the storey count is not explicitly stated, and a typical interior height would be about 2.4–3 metres. Use a compact rural work-shed footprint, typically about 8–15 metres long and 5–9 metres wide, with the staging bay occupying most of it and a small storage room attached internally. The text directly supports at least one broken exterior window and one internal storage-room door; the plan also requires a primary exterior entrance. There are no stairs or other multi-storey vertical elements.", "applied_shots": [ "S33_Shot6", "S33_Shot12", "S33_Shot13", "S77_Shot1", "S77_Shot8", "S77_Shot10" ], "group_id": "bg_forest_slaughter_complex", "depends_on_fp": [] }, "fp_patrol_boat_deck": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan diagram of a compact modern coastal patrol boat used around an isolated island community. Show an elongated tapered hull, an open foredeck, a compact enclosed wheelhouse slightly forward of midships, narrow port and starboard side passages, a broad aft open deck, continuous safety railings, and a centered stern boarding gate. Use modern South Korean coastal-vessel layout conventions only as geometry: practical narrow circulation, forward-facing wheelhouse glazing, an aft-facing wheelhouse access door, a central helm console, a roof-position mast and navigation unit, and a simple fixed aft bench. Draw all architecture, fixtures, furniture, doors, windows, and railings with clean single-weight black outlines on a white or off-white background, using simple geometric CAD-plan symbols. Represent the aft wheelhouse door with a line and swing arc, each window bank with double parallel wall lines, the helm console as a simple rectangle, the bench as a long divided rectangle, the mast unit as simple concentric plan symbols, and the railings as thin paired lines with evenly spaced posts. Apply only solid flat pastel area fills: foredeck working and hull-edge utility areas in pale gray, enclosed wheelhouse service zone in pale cyan, both side-passage threshold zones in pale beige, and aft shared deck zone in pale yellow. Use each zone color consistently with no blending. Short generic area labels such as Utility Zone, Service Zone, Threshold Zone, and Shared Zone may appear in larger plain text, but include no other words or annotations. Place one small white circle containing a unique black number at each base-layer element numbered 1 through 18, with every number appearing exactly once. Do not draw numbers 19, 20, or 21 and do not depict watcher silhouettes, blood, blood trails, bloodied hands, panic cues, people, vehicles in the water, camera icons, view cones, arrows, or event-state graphics. A small north arrow with N may appear in one corner. Keep the composition sparse, readable, and purely diagrammatic. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, material rendering, drop shadows, decorative illustration, or cinematic effects.", "key_elements": [ "Elongated modern coastal patrol-boat hull footprint", "Open foredeck and larger aft working deck", "Compact enclosed wheelhouse centered slightly forward of midships", "Narrow port and starboard circulation passages", "Continuous safety railings with a stern boarding gate", "Forward and side wheelhouse window banks", "Aft-facing wheelhouse access door", "Central helm console inside the wheelhouse", "Roof-mounted mast, radar, and navigation-light unit", "Persistent aft bench", "Transient surveillance and blood cues reserved for separate overlays" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "boat hull envelope", "number": 1, "position_hint": "entire elongated outer footprint, marker near the bow centerline" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "foredeck working zone", "number": 2, "position_hint": "forward of the wheelhouse within the tapered bow" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "enclosed wheelhouse", "number": 3, "position_hint": "centered slightly forward of midships" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "port side passage", "number": 4, "position_hint": "narrow passage along the port side of the wheelhouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "starboard side passage", "number": 5, "position_hint": "narrow passage along the starboard side of the wheelhouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "aft open deck", "number": 6, "position_hint": "broad open deck behind the wheelhouse" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "bow safety rail", "number": 7, "position_hint": "following the curved forward edge of the foredeck" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "port safety rail", "number": 8, "position_hint": "along the outer port deck edge" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "starboard safety rail", "number": 9, "position_hint": "along the outer starboard deck edge" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "stern safety rail", "number": 10, "position_hint": "across the rear edge of the aft deck, interrupted by the boarding gate" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "aft wheelhouse door", "number": 11, "position_hint": "center of the wheelhouse aft wall, opening onto the aft deck" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "forward window bank", "number": 12, "position_hint": "across the angled forward wall of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "port window bank", "number": 13, "position_hint": "port wall of the wheelhouse" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "starboard window bank", "number": 14, "position_hint": "starboard wall of the wheelhouse" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "helm console", "number": 15, "position_hint": "inside the wheelhouse, centered behind the forward window bank" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "mast and navigation unit", "number": 16, "position_hint": "centered on the wheelhouse roof footprint" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "aft deck bench", "number": 17, "position_hint": "against the port side of the aft deck, clear of the central walkway" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "stern boarding gate", "number": 18, "position_hint": "center of the stern rail at the end of the main circulation path" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "hostile watcher silhouettes", "number": 19, "position_hint": "beyond the side or stern railings in the night surveillance state; overlay only" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "dripping blood and deck smears", "number": 20, "position_hint": "across the aft deck near the wheelhouse entrance in the panic state; overlay only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "bloodied hands in foreground", "number": 21, "position_hint": "close foreground over the aft deck during the panic state; overlay only" } ], "camera_recommendations": [ { "bg_id": "L38B04", "camera_height": "eye-level standing approximately 1.6 m above the aft deck", "camera_position": "near number 18 (stern boarding gate), facing diagonally across number 6 (aft open deck) toward number 11 (wheelhouse door), with the hostile surveillance presence associated with number 19 beyond the railings", "framing_notes": "Keep the aft deck circulation, wheelhouse entrance, side railings, and threatening watcher silhouettes legible; number 19 is overlay metadata and is not part of the base floor plan image.", "ignore_numbered_elements": [ 20, 21 ], "lens_hint": "35mm wide angle", "sub_location": "aft_open_deck", "use_numbered_elements": [ 3, 4, 5, 6, 8, 9, 10, 11, 13, 14, 16, 17, 18, 19 ] }, { "bg_id": "L38B03", "camera_height": "chest-level approximately 1.4 m above the aft deck", "camera_position": "near number 17 (aft bench), facing toward number 11 (wheelhouse door) across number 6 (aft open deck), with number 20 on deck surfaces and number 21 close to the foreground", "framing_notes": "Prioritize the blood-drip overlay and bloodied hands while retaining the stern rail, side passages, and wheelhouse entrance as stable spatial anchors; numbers 20 and 21 are not drawn on the base plan.", "ignore_numbered_elements": [ 19 ], "lens_hint": "32mm wide angle", "sub_location": "aft_open_deck", "use_numbered_elements": [ 3, 4, 5, 6, 8, 9, 10, 11, 13, 14, 16, 17, 18, 20, 21 ] }, { "bg_id": "L38B01", "camera_height": "low exterior viewpoint approximately 1.2 m above the waterline", "camera_position": "off the forward port quarter, facing number 1 (hull envelope), number 2 (foredeck), and number 3 (wheelhouse), with number 16 (mast and navigation unit) centered above the profile", "framing_notes": "Show the complete approaching vessel silhouette, including bow rail, side rails, forward window bank, and mast; maintain enough surrounding water to communicate approach.", "ignore_numbered_elements": [ 19, 20, 21 ], "lens_hint": "50mm normal lens", "sub_location": "offshore_approach_view", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 16 ] }, { "bg_id": "L38B02", "camera_height": "eye-level standing approximately 1.6 m above the aft deck", "camera_position": "near number 18 (stern boarding gate), facing forward across number 6 (aft open deck) toward number 11 (wheelhouse door), with numbers 4 and 5 forming side circulation routes", "framing_notes": "Emphasize an empty, orderly deck and uninterrupted circulation; no people, blood, handprints, or surveillance figures should appear.", "ignore_numbered_elements": [ 19, 20, 21 ], "lens_hint": "35mm wide angle", "sub_location": "deserted_aft_deck", "use_numbered_elements": [ 3, 4, 5, 6, 8, 9, 10, 11, 13, 14, 16, 17, 18 ] } ], "scale_guideline": "The source does not specify vessel dimensions; use a compact modern coastal patrol-boat footprint typically about 10–20 m long and 3–5 m wide. Treat it as one main exterior deck with one low enclosed wheelhouse level, typically producing an above-water height of roughly 4–7 m when the roof mast is included; the exact height is unspecified. This schematic has one aft wheelhouse door, three wheelhouse window banks, and a roof mast extending above the wheelhouse, while individual window-pane counts remain unspecified.", "applied_shots": [ "S63_Shot2", "S63_Shot8", "S63_Shot14", "S89_Shot1", "S90_Shot1", "S90_Shot4" ], "group_id": "bg_police_patrol_boat", "depends_on_fp": [] }, "fp_l41_main": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a modest contemporary dockside fishing-gear warehouse in an isolated South Korean island harbor. Show a simple rectangular, single-space warehouse with thick but single-weight black wall outlines on a white or off-white background. Use geometric CAD-plan symbols only. Divide the plan into consistent solid pastel zones: number 1, the large Shared Zone, in pale yellow; number 2, the interior Threshold Zone at the dock entrance, in pale beige; number 3, the compact Service Zone in the northwest corner, in pale cyan; and number 4, the exterior dock apron Utility/Exterior Zone beyond the east wall, in pale gray. Place number 5 at a broad double-leaf cargo doorway centered in the east wall, drawn with standard door leaves and swing arcs opening toward the dock apron. Place number 6 at a smaller landside personnel door in the southwest portion of the west wall, drawn with one door leaf and swing arc. Place number 7 at a narrow high window in the north wall and number 8 at a narrow high window in the south wall, each represented by double parallel lines within the wall. Place number 9 on a long run of built-in fishing-gear racks against the north wall. Place number 10 on a long rectangular worktable in the center, oriented east to west, and number 14 on a simple long bench parallel to its south side. Place number 11 on a standard plan-symbol utility wash sink in the northwest service alcove. Place number 12 on built-in gear lockers along the west wall north of the personnel door. Place number 13 on simple rectangular rope and net storage bins along the south wall. Preserve a broad unobstructed route from the central work area through the loading threshold to the cargo doorway and dock apron. The layout should reflect a practical 2020s coastal utility building with older, limited island infrastructure, expressed through compact geometry and functional access placement rather than visual styling. Draw every listed base element as a small circle containing its unique black number exactly once. Area labels may read only Shared Zone, Threshold Zone, Service Zone, and Exterior Zone in larger simple text. No other labels, annotations, dimensions, camera symbols, field-of-view cones, people, vehicles, event cues, or transient objects. Add only an optional small north arrow in one corner. Strictly flat 2D plan view only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendered lighting, no textured surfaces, and no material rendering.", "key_elements": [ "Single open-plan dockside gear warehouse", "Dock-facing double cargo doorway with an interior loading threshold", "Central long worktable and bench for enclosed staging", "Built-in fishing-gear racks and lockers along perimeter walls", "Compact wash and utility alcove", "Exterior dock apron connected directly to the warehouse", "Flat pastel zoning for shared, threshold, service, and exterior areas" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared storage and work area", "number": 1, "position_hint": "large central interior occupying most of the warehouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "loading threshold zone", "number": 2, "position_hint": "east edge of the interior immediately inside the cargo doorway" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "service wash alcove", "number": 3, "position_hint": "northwest corner of the warehouse" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior dock apron", "number": 4, "position_hint": "outside the east wall beyond the cargo doorway" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "dock-facing double cargo door", "number": 5, "position_hint": "center of the east wall opening onto the dock apron" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "landside personnel door", "number": 6, "position_hint": "southwest section of the west wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "north high window", "number": 7, "position_hint": "north wall near the middle of the shared area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "south high window", "number": 8, "position_hint": "south wall opposite the north high window" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "built-in gear racks", "number": 9, "position_hint": "long run against the north wall, east of the service alcove" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "long worktable", "number": 10, "position_hint": "center of the shared area, oriented east to west" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "utility wash sink", "number": 11, "position_hint": "inside the northwest service alcove against the west wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in gear lockers", "number": 12, "position_hint": "along the west wall north of the personnel door" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rope and net storage bins", "number": 13, "position_hint": "along the south wall between the personnel door and high window" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "worktable bench", "number": 14, "position_hint": "parallel to the south side of the central worktable" } ], "camera_recommendations": [ { "bg_id": "L41B03", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 6 (landside personnel door), facing diagonally across number 1 (shared storage and work area) toward number 10 (long worktable) and number 9 (built-in gear racks)", "framing_notes": "Keep the worktable and open central floor prominent for a tense three-person conversation; allow the dock-facing threshold and cargo door to remain in the deeper background.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "dock_gear_warehouse_main", "use_numbered_elements": [ 1, 2, 5, 6, 9, 10, 12, 13, 14 ] }, { "bg_id": "L41B02", "camera_height": "eye-level seated-to-standing perspective, approximately 1.4 m", "camera_position": "near number 10 (long worktable), facing diagonally toward number 5 (dock-facing cargo door), number 2 (loading threshold), and number 4 (exterior dock apron)", "framing_notes": "Frame the table in the foreground and the cargo doorway beyond it so seated and doorway positions can share the composition, with a clear sightline toward activity outside.", "ignore_numbered_elements": [], "lens_hint": "32mm wide angle", "sub_location": "dock_gear_warehouse_main", "use_numbered_elements": [ 1, 2, 4, 5, 8, 10, 13, 14 ] } ], "scale_guideline": "Treat the warehouse as a single-storey dock utility building, typical for a small contemporary island harbor; the text does not specify its height, so use a typical tall service-space height of roughly 3.5–5 m. Use a modest rectangular footprint typical of a local gear warehouse, approximately 100–200 square metres rather than an industrial-scale hall. One broad dock-facing cargo doorway is directly supported by the scene; the personnel door and two high windows are conservative layout inferences for access and ventilation. Keep the dock apron at approximately the same level as the warehouse threshold, with only a minor drainage lip if needed.", "applied_shots": [ "S81_Shot1", "S81_Shot10", "S81_Shot12", "S83_Shot4", "S83_Shot5" ], "group_id": "bg_dock_gear_warehouse", "depends_on_fp": [] } }, "consumed_bg_catalog_hash": "dd66d818efd3bd53", "consumed_shot_binding_hash": "6052358450b52e88" }, "step_id": "floor_plan_prompt", "run_id": "508965db-99f8-42f7-86f4-a4c2679297fa", "resolved_model": "gpt", "updated_at": "2026-08-04T05:44:55.055689+00:00", "project_config_snapshot": {} }