{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 2, "config_hash": "b721e41033bb6bac", "data": { "floor_plans": { "fp_living_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a maintained affluent detached home's ground-floor living room, entrance relationship, and route to an internal staircase. Derive the layout from contemporary South Korean domestic conventions retained in a future setting: a modest entrance vestibule, a spacious shared living room, broad exterior-facing glazing, and an unobstructed internal stair approach. This is a simple reference map, not artwork. Use single-weight black outlines on an off-white background, geometric shapes only. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nPlace a large rectangular living room centrally. Its south wall contains a broad glazing assembly with a fixed portion toward the southwest and an operable portion toward the southeast. Show glazing using double parallel lines in the wall; distinguish the operable bay with a simple overlapping-panel plan symbol, without encoding its event-specific open state. Leave generous clear floor immediately inside this bay. A narrow exterior access strip wraps along the south and west sides, connecting the glazing to the entrance. Retain a solid southwest building corner between the glazed frontage and the entrance side. Place the entrance vestibule at the northwest side of the living room, reached through a hinged exterior door in the west wall. Draw that door with a line and swing arc and a tiny geometric lock glyph at its latch edge. Connect the vestibule to the living room through a broad wall opening. Along the room's east edge, reserve an unobstructed circulation strip leading to a staircase at the northeast. Draw only the ground-floor stair footprint with parallel tread lines, not an upper-floor plan. Do not add unsupported rooms, extra windows, decorative fixtures, or furniture.\n\nUse solid flat pastel fills: pale yellow for the living room, pale beige for the vestibule, pale cyan for the stair approach, pale blue for the stair footprint, and pale gray for the exterior strip. No gradients, blending, or drop shadows. The circulation strip is an open part of the room, not a walled corridor.\n\nDraw small circles with black numbers exactly once each: 1 in the living room; 2 in the exterior strip; 3 in the vestibule; 4 at the exterior entrance door; 5 at the vestibule-to-living-room opening; 6 at the fixed glazing portion; 7 at the operable glazing bay; 8 in the east-side stair approach; 9 on the staircase footprint; 10 beside the entrance lock glyph. Offset adjacent circles enough to keep them legible. Draw only markers 1 through 10. Markers 11 and 12 belong exclusively to a separate background-state overlay and must not appear here. Do not draw people, animals, a robot, a phone, damage, debris, blood, trails, or event cues. No text inside the diagram other than these numbered circles; no dimensions, legend, camera symbols, field-of-view cones, or directional arrows.", "key_elements": [ "Spacious maintained living room with clear floor beside the glazing", "Broad full-height glazing with a distinct operable bay", "Exterior access connecting the glazed frontage to the entrance around a solid corner", "Entrance vestibule with an older keyed lock", "Unobstructed route from the living room to the internal staircase", "Robot damage and the open-window state excluded from the base diagram" ], "numbered_elements": [ { "number": 1, "label": "Living room", "category": "area", "position_hint": "central ground-floor room", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Exterior access strip", "category": "area", "position_hint": "continuous strip along south and west sides of the room", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entrance vestibule", "category": "area", "position_hint": "northwest side of the living room", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Exterior entrance door", "category": "opening", "position_hint": "west wall of the entrance vestibule", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Vestibule opening", "category": "opening", "position_hint": "between vestibule and northwest living-room edge", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Fixed glazing portion", "category": "opening", "position_hint": "south wall, west of the operable bay", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Operable full-height glazing", "category": "opening", "position_hint": "southeast portion of living-room south wall", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Stair approach", "category": "area", "position_hint": "open circulation strip along living-room east edge", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Internal staircase", "category": "area", "position_hint": "northeast end of stair approach, connecting to the second floor", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Older keyed entrance lock", "category": "prop", "position_hint": "latch edge of entrance door number 4", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Fallen damaged household robot", "category": "prop", "position_hint": "living-room floor immediately inside operable glazing number 7; damaged head exterior reveals silver metal, without human blood", "base_layer_decision": "state_overlay_transient_object" }, { "number": 12, "label": "Glazing open state", "category": "opening", "position_hint": "operable bay number 7, open during the intrusion", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L152B02", "sub_location": "living_room_glazing_floor", "camera_position": "Inside number 1, just northeast of the floor area beside number 7, facing southwest and downward toward number 11 with numbers 6 and 7 behind it.", "camera_height": "low viewpoint, approximately 0.4-0.6 m above the floor", "lens_hint": "50mm normal lens", "framing_notes": "Prioritize the floor beside the open glazing and the robot's damaged head with exposed silver metal. Apply number 12 to number 7. Include only a narrow exterior glimpse through the opening; the entry and staircase can remain outside this tight frame. Preserve the maintained room condition: no human blood, room-wide ransacking, or invented debris.", "use_numbered_elements": [ 1, 2, 6, 7, 11, 12 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scene establishes a ground floor and an occupied second floor connected by internal stairs; any additional storeys are unspecified and should not be added. A living-room footprint roughly 5-8 m across and residential storey heights around 2.7-3.3 m are conservative typical ranges for an affluent detached home, not stated measurements. The glazing extends approximately floor to ceiling and includes an operable section; its exact panel count and mechanism are unspecified, so the diagram's subdivision is schematic. The staircase spans the full ground-to-second-floor rise; the second-floor escape window is established by the scene but lies outside this plan's scope.", "applied_shots": [ "S5_Shot9" ], "group_id": "bg_luxury_house", "depends_on_fp": [] }, "fp_refugee_court_interior": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a small, improvised administrative courtroom in a post-disaster future society. Use a clean architectural CAD-plan appearance: single-weight black outlines, geometric shapes only, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show one modest rectangular room with an ordinary freestanding table rather than a monumental judicial bench. Do not add a dais, jury box, gallery seating, decorative architecture, or futuristic equipment. Orient the working end at the top of the image. Fill the central open courtroom floor with solid pale yellow, the north working zone with solid pale cyan, and the small southwest entry threshold with solid pale beige. These are functional zones within one room, not separate rooms; do not put partition walls between them. Show a single inward-swinging door in the south wall near the southwest corner, using a door leaf and swing arc. Keep its swing clear of furniture. Place a long rectangular table east-west in the northern part of the room, with a simple chair centered behind it toward the north wall and facing the open floor. Leave generous unobstructed floor south of the table and circulation around both ends, allowing access from the chair to the floor in front. Indicate a small clear stamping workspace on the eastern part of the tabletop with a simple outlined rectangle; this is part of the table, not a separate object. Leave the western tabletop available for document stacks supplied by a separate background overlay, but do not draw papers or a document marker in this base diagram. Use small circles with black numbers, each appearing exactly once: 1 on the central open courtroom floor, 2 in the north working zone away from furniture, 3 at the southwest entry threshold, 4 beside the entry door, 5 on the table, 6 on the chair, and 7 within the tabletop stamping workspace. Draw only markers 1 through 7; marker 8 belongs exclusively to the separate overlay. No people, action arrows, fallen furniture, scattered papers, blood, impact marks, floor trails, exterior refuse, or memory imagery. No camera symbols, field-of-view cones, dimensions, legends, or written object labels. Apart from the numbered circles, omit all text.", "key_elements": [ "One modest courtroom with an uninterrupted entry-to-table route", "Southwest doorway and threshold kept clear of furniture", "Northern freestanding judicial table and chair on the same floor level", "Open floor before the table connected to circulation around both table ends", "Clear stamping workspace on the eastern tabletop", "Document stacks on the western tabletop supplied separately as an overlay", "Identical room and furniture arrangement across both shots, without invented struggle damage" ], "numbered_elements": [ { "number": 1, "label": "Open courtroom floor", "category": "area", "position_hint": "Central and southern room, directly before the north table", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Judicial working zone", "category": "area", "position_hint": "Northern part of the room, continuous with the open courtroom floor", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entry threshold", "category": "area", "position_hint": "Southwest interior immediately inside the doorway", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Courtroom entry door", "category": "opening", "position_hint": "South wall near the southwest corner, swinging inward", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Judge's table", "category": "furniture", "position_hint": "Northern room, long axis east-west, with clearance at both ends", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Judge's chair", "category": "furniture", "position_hint": "Centered north of the table, facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Stamping workspace", "category": "area", "position_hint": "Eastern portion of the tabletop; an allocated surface area, not a separate fixture", "base_layer_decision": "base_structural_unit" }, { "number": 8, "label": "Document stacks", "category": "prop", "position_hint": "Western portion of the tabletop, leaving the eastern stamping workspace clear", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L159B01", "sub_location": "courtroom", "camera_position": "Just east of number 3 (entry threshold), near number 4 (entry door), facing diagonally north toward number 5 (table) and number 6 (chair) across number 1 (open courtroom floor).", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "28–35mm wide angle", "framing_notes": "Keep number 1 broad and unobstructed in the foreground, with numbers 5 and 6 readable together. Show the tabletop workspace at number 7 and add document stacks from overlay number 8. Include the entry edge at the left foreground when framing permits. Preserve the same camera and furniture positions for both shots; a person falling does not imply an overturned chair, scattered documents, blood, or damage. Do not include the exterior or memory sequence.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Only one courtroom level is represented; the building's total storey count and overall height are unspecified and must not be inferred from this interior plan. A room footprint around 4–6 m by 5–8 m and a ceiling height around 2.5–3.5 m are conservative typical ranges for a modest repurposed administrative room, not stated measurements. Keep the table at ordinary seated working height, with the chair and open floor on the same level; no raised judicial platform or vertical circulation is established. The entry is required by the scene, but its exact placement is a layout convention here, and no window count or facade arrangement is established.", "applied_shots": [ "S8_Shot5", "S8_Shot8" ], "group_id": "bg_refugee_court", "depends_on_fp": [] }, "fp_refugee_court_rubbish_site": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic floor plan of a rubbish-strewn exterior beside a modest courthouse in a future post-disaster urban setting. Use a clean architectural CAD-plan appearance: single-weight black outlines, white background, simple geometric shapes, and solid pastel area fills. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. This is a spatial reference diagram, not artwork or a night-scene illustration.\n\nShow only a cropped rectangular courthouse footprint along the north edge, with its exterior wall running east–west. Treat this as a utilitarian civic building edge adjoining an informal service yard, not a monumental forecourt or a traditional courtyard complex. Leave the building interior unspecified. Immediately south of the building, provide a continuous east–west walkable strip connected without a barrier to a central open-ground clearing. Arrange three stable rubbish-heap footprints around the clearing: one elongated polygon to the west, one broad polygon to the south, and one smaller polygon to the southeast. Preserve an unobstructed connection from the clearing to the northern walkable strip and an open exit toward the east edge. The clearing must accommodate a reclining adult and space to stand; the route must remain comfortably passable. These relative placements are schematic continuity choices, not surveyed geography.\n\nUse pale blue for the courthouse footprint, pale beige for the walkable strip, pale yellow for the open-ground clearing, and pale gray consistently for the rubbish-heap areas. Represent heaps only as simple angular perimeter polygons, without individual loose objects, texture, contours, or height indications. Area-color transitions are not walls. Place exactly one small white circle with a black number at each reference: 1 inside the cropped courthouse footprint near its exterior edge; 2 on the walkable strip; 3 in the central clearing; 4 inside the western heap footprint; 5 inside the southern heap footprint; 6 inside the southeastern heap footprint. Each number appears exactly once. Do not add unnumbered fixtures or invent doors, windows, furniture, stairs, or fences. No text other than these numbers is necessary. Do not depict people, a body outline, a wallet, money, identification documents, blood, movement trails, discard targets, or other action-state cues. Do not draw cameras, field-of-view cones, directional arrows, dimensions, legends, elevations, or height annotations.", "key_elements": [ "Cropped courthouse exterior edge anchors the yard without inventing an interior layout.", "Continuous walkable route beside the courthouse connects directly to the central clearing.", "Central open ground remains the shared spatial anchor for waking and subsequent wallet-handling action.", "Three schematic rubbish-heap footprints frame the clearing while preserving circulation.", "Wallet, money, and identification remain shot-level action props and are not fixed background elements.", "Pastel area fills communicate layout only; nighttime atmosphere belongs to downstream backgrounds." ], "numbered_elements": [ { "number": 1, "label": "Courthouse edge", "category": "area", "position_hint": "Cropped building footprint along the north boundary; exterior wall faces south toward the yard.", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Walkable side route", "category": "area", "position_hint": "East–west strip immediately south of the courthouse, open toward the east frame edge.", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Open ground clearing", "category": "area", "position_hint": "Central yard south of the route, directly connected to it without a wall or threshold.", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Western rubbish heap", "category": "area", "position_hint": "Elongated footprint along the west side of the central clearing.", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Southern rubbish heap", "category": "area", "position_hint": "Broad footprint bordering the south side of the central clearing.", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Southeastern rubbish heap", "category": "area", "position_hint": "Smaller footprint southeast of the clearing, set back from the eastern route connection.", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L161B01", "sub_location": "rubbish_heap_outside_court", "camera_position": "Near the eastern connection between number 2 (walkable side route) and number 3 (open ground clearing), looking west-southwest across number 3 toward numbers 4 and 5, with number 1 along the upper-right edge and number 6 near the left foreground.", "camera_height": "Low standing viewpoint, approximately 1.2 m.", "lens_hint": "32mm moderate wide angle", "framing_notes": "Use the same spatial setup for both shots. Keep number 3 unobstructed for the waking and standing action, with rubbish heaps dominating the surroundings and only a limited courthouse edge visible. Preserve the route connection. Nighttime and rough-ground appearance belong to this background, not the schematic plan. Keep the space unpopulated; do not bake the wallet, cash, identification, or a discard marker into the background.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The courthouse storey count and height are unspecified; a modest one-to-three-storey structure with roughly 3–4 m per storey is a typical conservative reference for a repurposed utilitarian civic building, not an established scene fact. Treat the visible yard as a compact service-yard space, typically around 10–20 m across, with a clearing large enough for an adult to lie down and stand and a route wide enough for pedestrian passage; these are working scale ranges rather than measured dimensions. The courthouse footprint is cropped, and neither its full extent nor facade opening counts can be inferred from this plan. Rubbish heaps should have uneven, locally obstructive height without becoming building-scale structures; their heights and any ground-level changes are unspecified.", "applied_shots": [ "S9_Shot2", "S9_Shot5" ], "group_id": "bg_refugee_court", "depends_on_fp": [] }, "fp_backstreet_restaurant": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a modest backstreet restaurant interior. Use single-weight black outlines on a white background, simple geometric shapes, and solid pastel area fills. This is a clean architectural CAD-style layout reference, not artwork. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nUse a compact, elongated rectangular room, with north at the top. The layout reflects a small adapted urban restaurant in a future disaster-affected Korean setting: ordinary chair-height dining furniture and economical circulation, not futuristic equipment or an assumed traditional floor-seating arrangement. Limit the drawing to the dining interior, entrance access, and secluded transaction seating; do not invent kitchens, toilets, windows, or additional furnishings.\n\nDivide the floor into three adjoining, non-overlapping color areas without adding internal walls: the main shared circulation area in pale yellow, a small southwest entrance threshold in pale beige, and a secluded northeast seating corner in pale blue. The corner is secluded by its distance from the entrance and its position beside the north and east perimeter walls, not by a separate enclosure. Keep an unobstructed approach from the entrance through the west side of the room to the seating corner.\n\nDraw these numbered base elements, each with exactly one small white circle containing its unique black number: 1 in the shared circulation area; 2 in the southwest threshold area; 3 in the secluded northeast seating area; 4 at an entrance door in the west wall near the southwest corner, using a door leaf and inward swing arc that does not obstruct the approach; 5 on a small rectangular transaction table in the secluded corner, with its long edges running east-west; 6 on a chair centered north of the table, facing south, with clearance behind it to the north wall; 7 on a chair centered south of the table, facing north, accessible from the west-side approach. Draw the table as a plain rectangle and each chair as a small square with a simple backrest line. Keep the table narrow enough for two seated people to exchange an envelope across it, and leave space beside both chairs for standing figures.\n\nDraw markers 1 through 7 only. Do not draw marker 8, the money envelope, loose cash, hands, people, or any other event-state objects. Do not add siren symbols, emergency vehicles, flashing-light cues, departing crowds, or night-lighting effects. No camera icons, viewing cones, movement arrows, dimensions, legends, or furniture labels. Optional larger area text is limited to Shared Zone, Threshold Zone, and Private Zone; a small N with a north arrow is permitted in one corner. No other text.", "key_elements": [ "Compact rectangular dining interior with southwest entrance access", "Open west-side approach connecting the entrance to the secluded northeast corner", "Single transaction table with north and south facing chairs", "Consistent table-and-seat geometry for hand, face, and full-body framing", "Flat pastel zoning without invented internal partitions", "Money envelope reserved for the background overlay, never the base plan" ], "numbered_elements": [ { "number": 1, "label": "Shared circulation area", "category": "area", "position_hint": "Central and western interior, connecting the southwest threshold to the northeast seating corner", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entrance threshold", "category": "area", "position_hint": "Southwest corner, immediately inside the entrance", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Secluded seating corner", "category": "area", "position_hint": "Northeast interior beside the north and east perimeter walls", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Entrance door", "category": "opening", "position_hint": "West wall near the southwest corner, opening inward into the threshold", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Transaction table", "category": "furniture", "position_hint": "Within the northeast seating corner, long edges aligned east-west", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Rear facing chair", "category": "furniture", "position_hint": "Centered north of table 5, facing south, with clearance to the north wall", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Approach facing chair", "category": "furniture", "position_hint": "Centered south of table 5, facing north, reached from the west-side approach", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Money envelope", "category": "prop", "position_hint": "Exchange space across table 5 between chairs 6 and 7; exact placement or hand contact follows the shot", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L162B01", "sub_location": "restaurant_interior", "camera_position": "In the southwest portion of number 1, just beyond number 2, facing diagonally northeast toward number 5 between numbers 6 and 7; number 4 remains behind the camera.", "camera_height": "Approximately 1.3 m, near seated eye level", "lens_hint": "35mm equivalent for the master background", "framing_notes": "Keep number 6 on the far side of number 5 and number 7 on the near side. Include the north and east corner walls and enough floor beside the chairs for full-body framing. Preserve this camera axis and furniture placement when cropping for faces or hands. Number 8 is an overlay object whose handling follows the shot, not a fixed tabletop fixture. Nighttime dimness belongs to the downstream background, not the plan; do not add emergency-light spill or departing crowds.", "use_numbered_elements": [ 1, 3, 5, 6, 7, 8 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Only one restaurant interior level is represented; the enclosing building's total storey count and overall height are unspecified, and no upper-storey geometry should be inferred. A dining-room footprint roughly 3–5 m wide by 5–8 m long and a ceiling height around 2.4–3 m are conservative typical ranges for a small adapted urban restaurant, not measurements established by the text. Ordinary chair-height dining proportions are appropriate, with a tabletop typically around 0.7–0.8 m high and an approximately 0.9–1.2 m clear approach where feasible. Entrance access is established, but the depicted single door is a schematic layout choice rather than an evidenced facade opening count; windows, stairs, and level changes are unspecified.", "applied_shots": [ "S10_Shot3", "S10_Shot6", "S10_Shot7" ], "group_id": "bg_backstreet_restaurant", "depends_on_fp": [] }, "fp_container_interior": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a modest repurposed shipping-container dwelling in a future disaster-affected Korean setting. Use a simple elongated rectangular enclosure, with its long axis running east-west, single-weight black outlines, geometric symbols, and a white background. This is a clean architectural CAD-like layout diagram, not artwork. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Keep the interior undivided by partition walls. Use flat solid pastel area fills: pale yellow for the shared circulation floor, pale beige for the small western entry threshold, pale blue for the sleeping area along the northeastern wall, and pale gray for the clear multipurpose bay along the south-central side. These colored patches indicate functional areas, not separate rooms. Place a single entry opening in the west end wall, with a conventional door-leaf line and swing arc; the arc indicates swing clearance only, not an event state. Place one simple low sleeping-mat rectangle with a pillow rectangle along the northeastern wall. Keep the south-central bay empty and preserve a clear path from the entry to both the sleeping area and the bay. Do not add windows, kitchens, bathrooms, storage furniture, technological fixtures, or additional exterior structures. Show intact enclosure lines and no damage. Draw small circles containing black numbers, each exactly once: 1 in the shared interior floor, 2 at the western threshold, 3 within the blue sleeping area beside the mat, 4 on the sleeping mat, 5 within the empty south-central bay, and 6 beside the entry opening. Only markers 1 through 6 belong in this image. Marker 7 is overlay metadata and must not be drawn. Do not depict people, robots, absence silhouettes, action marks, daylight beams, displaced belongings, or any transient event cues. No text other than the numbered circles; no legend, dimensions, camera icons, view cones, or camera arrows.", "key_elements": [ "Elongated, intact container enclosure with one continuous interior", "West-end entry and compact threshold", "Low sleeping mat against the northeastern wall", "Persistent clear south-central bay, without an occupant or substitute object", "Unobstructed circulation connecting the entry, sleeping area, and clear bay", "Open-door daylight state reserved for the background overlay" ], "numbered_elements": [ { "number": 1, "label": "Shared container interior", "category": "area", "position_hint": "continuous central circulation floor inside the rectangular enclosure", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entry threshold", "category": "area", "position_hint": "immediately inside the west end wall", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Sleeping area", "category": "area", "position_hint": "northeastern side of the interior, without partition walls", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Low sleeping mat", "category": "furniture", "position_hint": "against the north wall within the northeastern sleeping area", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Clear multipurpose bay", "category": "area", "position_hint": "south-central interior, beside the shared circulation path", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Entry door", "category": "opening", "position_hint": "west end wall, opening onto the entry threshold", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Open doorway daylight state", "category": "opening", "position_hint": "at entry door number 6 and across threshold number 2; door opened forcefully but undamaged", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L170B01", "sub_location": "container_living_space", "camera_position": "Near the east end of number 1, facing west toward number 6 across number 5, with numbers 3 and 4 along the right side of the frame.", "camera_height": "Low standing eye level, approximately 1.4 m", "lens_hint": "24–28mm wide angle, avoiding fisheye distortion", "framing_notes": "Keep the sleeping mat and empty bay readable together, with the entry doorway visible beyond them. Apply number 7 only in the downstream background: the door is open and admits daytime light. Keep the interior intact and the clear bay unoccupied; do not add damage, debris, or a substitute figure.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Treat the dwelling as a single-level container conversion, typical for this shelter type; stacking and additional storeys are not specified. A compact module approximately 5.5–6.5 m long and 2.3–2.5 m wide, with roughly 2.3–2.7 m of interior clearance, is a typical planning range rather than a measured fact from the text. The scene establishes an entry door but does not specify additional openings, so this reference includes only that supported opening. The sleeping surface is represented as low floor bedding, a conservative regional layout choice rather than an explicitly described bed type.", "applied_shots": [ "S21_Shot2", "S21_Shot5" ], "group_id": "bg_container_home_wash_yard", "depends_on_fp": [] }, "fp_matsuda_junk_shop": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact salvage and appliance-repair shop. Use single-weight black outlines, simple geometric shapes, and a white background. It must resemble a clean CAD room-layout sketch. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only flat solid pastel area fills, with no blending or drop shadows.\n\nThe layout is a proposed spatial arrangement for a resource-constrained future disaster-era settlement: a narrow rectangular shop compatible with a street of temporary modular buildings, ordinary reused electrical equipment, dense perimeter storage, and an open route from the entrance to the repair desk. Do not assume traditional domestic architecture or advanced holographic equipment. North is the top of the drawing for diagram orientation only.\n\nDraw the complete shop perimeter with marker 1 just inside its northwest corner. The front is the south wall. Put an entrance opening at the center of this wall, marker 6, shown as a simple gap in the wall without inventing an unsupported door mechanism. Immediately inside it, place a pale beige threshold patch, marker 4. Outside it, show only a shallow pale gray exterior approach strip, marker 5. The central customer and circulation area, marker 2, is pale yellow and leads straight toward the rear repair area. The rear service area, marker 3, is pale cyan. Along the west wall, put a long pale lavender appliance-storage footprint, marker 7. Along the east wall, put a pale blue salvage-storage footprint, marker 8. These are open functional zones, not enclosed rooms; do not add internal partition walls. Keep a usable central aisle and a small customer interaction space in front of the rear desk.\n\nPlace the repair desk, marker 9, east-west across the rear service area, with working clearance behind it and access around its east end. Use a simple rectangular tabletop outline. On its west end, draw a compact top-down computer workstation glyph with marker 10. On its east end, draw a small old-fashioned telephone glyph with marker 11. Leave the middle of the desk unobstructed in this base plan. Place a shallow fixed tool organizer along the north wall behind the desk, marker 12. Show the storage piles as a few grouped appliance-sized rectangles within their respective footprints, not as individually detailed loose objects. Their group markers identify the entire persistent storage footprints.\n\nDraw each base marker from 1 through 12 exactly once as a small outlined circle containing its black integer. Separate circles clearly, especially on the desk. Do not print object names, dimensions, legends, screen content, brand names, or any other annotations. Optional larger area text is limited to Shared Zone, Service Zone, Threshold Zone, and Utility Zone; omit these if they crowd the numbers. Do not draw marker 13 or its repair television: that object belongs to a separate background overlay. Do not draw people, robots, weapons, a fallen body, blood, damage, displaced furniture, camera icons, viewing cones, or camera arrows. Preserve the same upright desk and undisturbed storage layout across all scene states.", "key_elements": [ "Compact open-plan salvage shop with a south entrance and rear repair workspace", "Clear central entrance-to-desk circulation and customer interaction space", "Persistent west appliance piles and east salvage piles", "Rear repair desk with computer on its west end and old telephone on its east end", "Fixed tool organizer behind the repair desk", "Unchanged desk and storage geometry before and after the incident", "Repair television supplied separately as a scene-specific overlay" ], "numbered_elements": [ { "number": 1, "label": "Shop enclosure", "category": "area", "position_hint": "entire rectangular shop; marker inside northwest perimeter", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Customer aisle", "category": "area", "position_hint": "central open floor between entrance and repair desk", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Repair workspace", "category": "area", "position_hint": "north end of shop, surrounding and behind repair desk", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Entrance threshold", "category": "area", "position_hint": "south center, immediately inside entrance opening", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Exterior approach", "category": "area", "position_hint": "shallow exterior strip immediately south of entrance", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Shop entrance", "category": "opening", "position_hint": "center of south perimeter wall", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Appliance storage pile", "category": "area", "position_hint": "west wall, beside central customer aisle", "base_layer_decision": "base_structural_unit" }, { "number": 8, "label": "Salvage storage pile", "category": "area", "position_hint": "east wall, stopping short of repair desk access", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Repair desk", "category": "furniture", "position_hint": "rear service area, long axis east-west, with clearance behind and at east end", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Computer workstation", "category": "prop", "position_hint": "west end of repair desk, facing the working position behind it", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Old telephone", "category": "prop", "position_hint": "east end of repair desk, within reach from behind desk", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Fixed tool organizer", "category": "furniture", "position_hint": "north wall behind repair desk", "base_layer_decision": "base_persistent_fixture" }, { "number": 13, "label": "Television under repair", "category": "prop", "position_hint": "middle portion of repair desk; leave adjacent tabletop available", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L168B03", "sub_location": "junk_shop_repair_counter", "camera_position": "Inside number 2, near its southeast edge, facing northwest toward number 9, with numbers 10 and 11 visible on the desk.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "32mm moderate wide angle", "framing_notes": "Use the same camera for both shots. Include the customer interaction space in front of number 9 for the inspection, and keep number 11 readable for the later telephone call. Preserve the ordinary clutter and dim daytime interior without adding a floor-plan lighting symbol. Screen content and character-specific markings are shot content, not persistent architecture.", "use_numbered_elements": [ 1, 2, 3, 7, 8, 9, 10, 11, 12 ], "ignore_numbered_elements": [ 13 ] }, { "bg_id": "L168B02", "sub_location": "junk_shop_entrance", "camera_position": "Near the east end of number 9, looking south along number 2 toward number 6 and the exterior strip at number 5.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "35mm wide angle", "framing_notes": "Frame the full entrance and enough floor for a full-height entering figure, with numbers 7 and 8 flanking the aisle. Keep the desk edge and television under repair in the lower foreground if visible. Exterior daylight against the dim interior is downstream background treatment only. No forced-entry damage or displaced piles.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 13 ], "ignore_numbered_elements": [] }, { "bg_id": "L168B01", "sub_location": "junk_shop_aisle_toward_desk", "camera_position": "Just north of number 4 on the southwest side of number 2, facing diagonally northeast toward number 9.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "35mm wide angle", "framing_notes": "Reserve the central aisle foreground for the radio-using figure and retain a clear view of number 9 behind that figure. The shopkeeper is slumped over the desk; the desk itself is not overturned. Keep number 13 and existing equipment in place without obscuring the adjacent tabletop needed for the action. Characters are separate shot staging, not floor-plan markers. Do not add blood, bullet damage, scattered tools, or other unsupported aftermath cues.", "use_numbered_elements": [ 1, 2, 3, 7, 8, 9, 10, 11, 12, 13 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Only a ground-level shop interior is established; the building's total storey count is unspecified, so a single-storey temporary shop with approximately 2.4–3 m internal clearance is a conservative typical assumption rather than a textual measurement. A footprint roughly 3–5 m wide and 6–9 m deep is a typical planning range for a compact modular settlement shop, not an established dimension or proof of a shipping-container shell. The scene establishes a shop entrance but does not establish the total number of facade openings; the diagram therefore shows the required entrance without inventing windows or additional doors. No stairs, mezzanine, tanks, or level changes are established, and the appliance piles should remain below the ceiling with the central circulation route unobstructed.", "applied_shots": [ "S15_Shot4", "S15_Shot10", "S17_Shot1", "S17_Shot7" ], "group_id": "bg_electronics_junk_shop", "depends_on_fp": [] }, "fp_container_wash_yard": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a modest converted-container dwelling frontage and its continuous outdoor dirt yard. Use a clean architectural CAD-plan appearance: single-weight black outlines, simple geometric shapes, and a white or off-white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Reflect an improvised dwelling in a future post-disaster settlement through compact container geometry and a simple outdoor washing arrangement, not decorative architectural styling or futuristic equipment. Place a long rectangular container footprint across the northern portion of the map, with its long frontage facing south. Fill this footprint pale blue and place circled number 1 inside it; omit interior furnishings and partitions because the interior is outside this plan's scope. On the western half of the south frontage, draw an entrance with a simple door leaf and inward swing arc, identified by circled number 2. Immediately outside that entrance, place a small pale-beige threshold area with circled number 3. Place a pale-cyan outdoor washing area just southeast of the threshold, in front of the eastern half of the container, identified by circled number 4. Surround the frontage and washing area with a continuous pale-gray open yard extending substantially south and west, identified by circled number 5. Keep the southwest portion of this yard open and well separated from the washing area, providing a distant observation position with an unobstructed view across the same continuous ground. Colored outdoor area boundaries indicate functional zones only, not walls, paving, curbs, or fences. Use exactly one solid pastel fill per area, without blending. Draw only the numbered circles 1 through 5, each exactly once, with black numbers. Do not draw markers 6 through 8, a hose, water spray, wet patches, mud trails, people, robots, observer silhouettes, or other event-state graphics. Do not invent windows, taps, tanks, drains, furniture, or neighboring buildings. No text other than the numbered circles is necessary. Do not include a legend, dimensions, camera symbols, view cones, or camera arrows.", "key_elements": [ "Compact converted-container footprint with a south-facing entrance", "Small exterior threshold connecting directly to the open yard", "Outdoor washing zone adjacent to the container frontage", "Continuous open ground separating the washing zone from distant southwest observation positions", "Hose placement, water spray, and wet dirt remain separate transient overlays" ], "numbered_elements": [ { "number": 1, "label": "Container dwelling", "category": "area", "position_hint": "Northern edge of the plan, long axis east-west; frontage faces south", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Front entrance", "category": "opening", "position_hint": "Western half of the container's south wall", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Entrance threshold", "category": "area", "position_hint": "Immediately south of number 2, connecting the doorway to the yard", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Outdoor washing area", "category": "area", "position_hint": "Southeast of the threshold, directly in front of the container's eastern half", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Open dirt yard", "category": "area", "position_hint": "Continuous ground south and west of the frontage; southwest portion accommodates distant observers", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Loose washing hose", "category": "prop", "position_hint": "Within number 4; its handled end is directed across the washing area, with supply origin unspecified", "base_layer_decision": "state_overlay_transient_object" }, { "number": 7, "label": "Active water spray", "category": "prop", "position_hint": "Within number 4, projecting from the loose hose toward the washing subject", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 8, "label": "Wet dirt and washed-off dust", "category": "prop", "position_hint": "Ground within number 4 and its immediate southern margin adjoining number 5", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L169B01", "sub_location": "container_front_yard", "camera_position": "At the southeast edge of number 5, facing northwest across number 4 toward number 1; retain the southwest portion of number 5 on the left for distant observers.", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "28–35mm wide angle", "framing_notes": "Use one shared establishing composition for both shots. Keep the container frontage and number 2 readable behind the washing area, and show uninterrupted yard between the washing activity and the distant southwest observer positions. Apply overlays 6, 7, and 8 only in the background state, never on the floor plan. Character staging is separate from the structural map.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8 ], "ignore_numbered_elements": [] } ], "scale_guideline": "A single-storey container dwelling approximately 2.5–3 m high is a conservative typical interpretation; the text does not specify its storey count or height. A footprint roughly 6–12 m long and 2.4–3 m wide is typical for a converted container rather than a scene-confirmed measurement. An entrance door is explicitly supported, but its frontage position is a schematic continuity choice, and additional opening counts are unspecified. Leave several metres of open yard between washing and observation positions as a typical staging allowance; no exact separation, raised platform, or other level change is established.", "applied_shots": [ "S16_Shot3", "S16_Shot6" ], "group_id": "bg_container_home_wash_yard", "depends_on_fp": [] }, "fp_militia_command_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact repurposed command office in a future post-disaster Korean setting. Use ordinary office layout conventions and a conventional tabletop speakerphone, not speculative holographic equipment. The image must be a simple architectural CAD-style diagram: single-weight black outlines, geometric shapes, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Draw a rectangular room, with north at the top. Divide its continuous floor into non-overlapping functional areas using single solid pastel fills without internal partition walls: pale blue for the southern command workspace, pale yellow for the northern visitor zone, and pale beige for the western entrance and circulation strip. Place a rectangular desk east-west across the middle, leaving passage around both ends. Place a small simple rectangular speakerphone glyph on the southern half of the desktop. Reserve generous unobstructed standing and bowing clearance south of the desk; do not add a chair or other furniture that would obstruct it. Reserve an empty visitor standing area directly north of the desk, facing south, with the uninterrupted north wall close behind it. Keep the north wall bare and intact. Add a conventional inward-swinging entrance near the southern end of the west wall, with its swing kept out of the desk and standing clearances; this is a schematic circulation assumption, not a source-specified opening. Use only small circles with black numbers for persistent references, each appearing exactly once: 1 at the room's northeast interior corner for the room enclosure; 2 on the desk; 3 on the speakerphone; 4 in the visitor standing area; 5 beside the continuous north wall; 6 in the southern standing and bowing clearance; 7 beside the entrance. These numbered clearances are empty functional floor areas, not people, objects, or physical partitions. Do not draw marker 8, a knife, impact damage, trajectories, people, handkerchiefs, blood, or any transient event cue. Do not add windows, storage, weapons displays, or unrelated fixtures. No text other than the numbered circles and an optional small north arrow marked N. No legend, dimensions, camera symbols, camera arrows, or field-of-view cones.", "key_elements": [ "Compact office with a central desk separating command and visitor positions", "Persistent tabletop speakerphone accessible from the command side", "Standing visitor directly between the desk and an uninterrupted rear wall", "Unobstructed command-side clearance for a deep forward bow", "Western circulation strip and assumed entrance kept clear of the principal interaction axis", "Embedded knife handled exclusively as a shot-dependent overlay, never as base-plan content" ], "numbered_elements": [ { "number": 1, "label": "Office enclosure", "category": "area", "position_hint": "entire rectangular room; marker near northeast interior corner", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Command desk", "category": "furniture", "position_hint": "middle of room, long axis east-west, with passage at both ends", "base_layer_decision": "base_persistent_furniture" }, { "number": 3, "label": "Tabletop speakerphone", "category": "prop", "position_hint": "southern half of desk, accessible from command position", "base_layer_decision": "base_persistent_fixture" }, { "number": 4, "label": "Visitor standing clearance", "category": "area", "position_hint": "north of desk, centered opposite command position, immediately in front of north wall", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Visitor rear wall", "category": "area", "position_hint": "continuous north boundary immediately behind visitor standing clearance", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Command standing and bowing clearance", "category": "area", "position_hint": "south of desk, with enough setback for a deep forward bow without touching the desktop", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Assumed office entrance", "category": "opening", "position_hint": "southern end of west wall, opening inward into western circulation strip", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Embedded wall knife", "category": "prop", "position_hint": "north wall beside visitor head position, slightly east of the visitor axis; shot-dependent overlay only", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L171B01", "sub_location": "command_office", "camera_position": "Near the southeast side of number 6, outside the bowing clearance, facing diagonally northwest across number 2 and number 3 toward number 4 and number 5.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "32–35mm equivalent moderate wide angle", "framing_notes": "Maintain one camera setup across all listed shots. Keep the speakerphone, visitor position, and rear wall spatially legible, with enough lower-frame room for the commander's bow. Marker 8 is a conditional overlay within this shared background ID: omit it entirely in S18_Shot1; show it embedded beside the visitor's face in S18_Shot5; retain it in S18_Shot6 whenever that wall position remains visible. The use list records applicability across the background's shots, not simultaneous presence in every shot. Do not bake the knife into the clean background. No blood or generalized room damage.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scope is a single office interior; the host building's storey count and overall height are unspecified and must not be inferred from this plan. A roughly 3–5 m by 4–6 m footprint and 2.4–3.0 m ceiling are conservative typical ranges for a repurposed contemporary Korean office, not source measurements. Size the desk and surrounding floor so an adult can stand opposite it and another can bow deeply from the command side without collision. Opening counts are unspecified; the depicted entrance is a circulation assumption, and no facade window count is established. The transient embedded knife belongs beside the standing visitor's head on the rear wall, not at floor level.", "applied_shots": [ "S18_Shot1", "S18_Shot5", "S18_Shot6" ], "group_id": "bg_militia_command_room", "depends_on_fp": [] }, "fp_detention_visiting_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of an entire spacious detention visiting room. Use single-weight black outlines, simple geometric shapes, and a white background, like a clean architectural CAD plan. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Depict a restrained future post-disaster institutional room retaining conventional contemporary room planning, not speculative futuristic equipment or invented ruin. Orient north at the top. Draw a broad rectangular room with one entry opening near the west end of its south wall. Place a rectangular interview table at the room center, its long axis east-west, with one simple chair centered along its north side facing south and one opposite along its south side facing north. Draw chairs as small top-down rectangles with backrest lines. Keep generous empty space around the table and behind both chairs. Maintain an uninterrupted approach from the southwest doorway along the west side of the room to the table; leave space for an accompanying person without adding furniture. Fill the main meeting area solid pale yellow and the west-side entry circulation strip solid pale beige. These adjoining color zones are parts of the same undivided room, not separate enclosed rooms. Use no gradients, blending, or drop shadows. Show the entry door with a leaf line and swing arc opening against the west wall, clear of circulation. Do not add a divider, visitation glass, telephone booths, windows, extra doors, or additional furniture. Place small circles with black numbers exactly once each: 1 in the main room's clear northeast area; 2 in the west-side circulation strip; 3 beside the southwest entry door; 4 inside the central table; 5 inside the north chair; 6 inside the south chair. Draw only markers 1 through 6. Marker 7 is an overlay-only tabletop photograph and must not appear, either as a marker or an object, in this base diagram. Do not depict people, injuries, restraints, photographs, event cues, or displaced objects. No text other than the numbered circles and optional short area labels 'Shared Zone' and 'Threshold Zone'. Do not draw camera icons, field-of-view cones, movement arrows, dimensions, elevations, or height annotations.", "key_elements": [ "Spacious undivided institutional visiting room", "Central rectangular table with opposing north and south seats", "Southwest entry with unobstructed west-side approach circulation", "Flat pale-yellow meeting zone and pale-beige threshold circulation zone", "Tabletop photograph reserved for the background overlay, not the base plan", "No visitation divider or unsupported futuristic fixtures" ], "numbered_elements": [ { "number": 1, "label": "Visiting room", "category": "area", "position_hint": "entire rectangular enclosure; marker in clear northeast portion of meeting zone", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entry circulation", "category": "area", "position_hint": "west-side strip connecting southwest entry to central meeting area, without a partition", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entry door", "category": "opening", "position_hint": "south wall near southwest corner; inward swing toward west wall", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Interview table", "category": "furniture", "position_hint": "room center, long axis east-west", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "North seat", "category": "furniture", "position_hint": "centered beside north edge of table, facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "South seat", "category": "furniture", "position_hint": "centered beside south edge of table, facing north", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Identification photograph", "category": "prop", "position_hint": "on central tabletop during the interview; depicted subject confined to the photograph surface", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L173B01", "sub_location": "visiting_room", "camera_position": "near the east wall of number 1, facing west across number 4, with numbers 5 and 6 on opposing sides and number 3 visible toward the left background", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "28–35 mm wide angle", "framing_notes": "Include the central table, both opposing seats, and the open approach through number 2 from number 3. Preserve generous empty room margins. Number 7 is a tabletop overlay prop, never an additional physical subject in the room. Facial bruising belongs to character makeup, not the background. Use this same camera for all referenced shots.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Only a single room level is in scope; the detention building's total storey count and overall height are unspecified. A roughly 6–9 m by 5–7 m room footprint and 2.7–3.5 m ceiling height are typical conservative planning ranges for a spacious contemporary institutional meeting room retained in this future setting, not measured facts from the text. The single entry shown is a schematic access assumption; exact door and window counts are unspecified, and no stairs, level changes, or multi-storey elements are established.", "applied_shots": [ "S23_Shot1", "S23_Shot6", "S23_Shot11" ], "group_id": "bg_detention_visiting_room", "depends_on_fp": [] }, "fp_l175_sewer": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a walkable underground municipal sewer access, running tunnel, and two-way fork. Use single-weight black outlines on a white background, geometric shapes only, like a simple architectural CAD plan. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use solid flat pastel fills with no blending or drop shadows. Arrange a compact access landing at the bottom, a long straight running tunnel extending upward, and a clear Y-shaped fork in the upper half with exactly two outgoing branches extending toward the upper-left and upper-right image margins. Keep the route continuous, unobstructed, and wide enough for people to run while carrying another person. The outgoing branches continue beyond the diagram boundary; do not close them with end walls. Use the utilitarian geometry of inherited modern urban sewer infrastructure: compact vertical maintenance access, a wall-mounted ladder, and unadorned connected passages, without speculative futuristic equipment. Fill the access landing pale beige, the running tunnel pale cyan, the fork junction pale yellow, the left branch pale blue, and the right branch pale gray. Adjacent colored areas meet without partition walls or drawn boundary lines across the walking route. Show a small circular overhead access opening in plan at the west side of the access landing and a compact ladder glyph directly beside it, using two parallel rails with short crossbars. This indicates their horizontal location only, not an elevation or a view down the shaft. Draw exactly seven small white circular markers with black numbers, each appearing exactly once: 1 in the access landing; 2 beside the fixed ladder; 3 beside the circular access opening; 4 midway along the straight running tunnel; 5 in the fork junction; 6 inside the left branch; 7 inside the right branch. Keep marker circles distinct from the larger access-opening circle. Draw no other text, legends, dimensions, camera icons, field-of-view cones, arrows, or annotations. Do not add furniture, doors across the passages, side rooms, a reception venue, street scenery, or a second access shaft. Preserve intact passage geometry. Do not depict people, clothing, loose objects, floodwater, incoming waves, floor trails, damage cues, or other transient events. Nighttime darkness is not represented on this white-background reference diagram.", "key_elements": [ "Compact vertical access landing with a fixed ladder and overhead access opening", "Continuous walkable running tunnel leading directly to a two-way fork", "Exactly two outgoing branches, both continuing beyond the diagram boundary", "Distinct solid pastel area fills without physical barriers between connected zones", "Intact pre-surge layout; no reception venue or later flood-event imagery" ], "numbered_elements": [ { "number": 1, "label": "Access landing", "category": "area", "position_hint": "south end of the plan, connected directly to the running tunnel", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Fixed access ladder", "category": "prop", "position_hint": "west wall of the access landing, beside the overhead access opening", "base_layer_decision": "base_persistent_fixture" }, { "number": 3, "label": "Overhead access opening", "category": "opening", "position_hint": "above the west side of the access landing, aligned with the ladder", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Running tunnel", "category": "area", "position_hint": "central straight passage between the southern access landing and northern fork", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Fork junction", "category": "area", "position_hint": "upper central junction where the running tunnel divides into two branches", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Left branch", "category": "area", "position_hint": "extends northwest from the fork and continues beyond the plan boundary", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Right branch", "category": "area", "position_hint": "extends northeast from the fork and continues beyond the plan boundary", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L175B01", "sub_location": "sewer_tunnel_and_fork", "camera_position": "near number 1 (access landing), slightly east of the passage centerline, facing along number 4 (running tunnel) toward number 5 (fork junction) and the mouths of numbers 6 and 7 (branches)", "camera_height": "eye-level standing, approximately 1.6m", "lens_hint": "24–28mm wide angle", "framing_notes": "Keep the junction and both branch mouths legible, with the landing in the foreground and number 2 at the left edge. Number 3 is overhead and may remain outside the frame. Maintain the intact pre-surge state without incoming seawater. The reception-scene shot assignment requires verification; do not incorporate reception architecture into this sewer background.", "use_numbered_elements": [ 1, 2, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This scope depicts an underground passage level connected to the surface by a vertical ladder, not a storeyed building; the full sewer network depth and level count are unspecified. A clear passage width of roughly 2–4m and headroom of roughly 2–3m are conservative typical working ranges for a walkable municipal trunk sewer, not measurements stated in the text. The access shaft and ladder extend through the full separation between passage floor and surface, whose height is unspecified. The text establishes a two-way fork but gives no passage lengths or access-opening diameter; branch continuations and the later street exit should not be interpreted as additional shafts at this junction.", "applied_shots": [ "S26_Shot7", "S26_Shot9", "S26_Shot11" ], "group_id": "bg_sewer_and_manhole", "depends_on_fp": [] }, "fp_l176_flooded_sewer": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an underground coastal sewer passage. Use a clean architectural CAD-plan appearance: single-weight black outlines, geometric shapes only, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Depict inherited contemporary municipal drainage infrastructure still used in a future disaster-affected coastal setting, using layout conventions only; add no speculative machinery or decorative architecture. Use this schematic topology: a long, straight main passage runs north-south through the center, connecting a short rear tunnel at the north to an unobstructed outlet at the south. Two short lateral feeder passages enter opposite sides near the northern junction, establishing multiple physical seawater entry routes without depicting flowing water. A small maintenance shaft adjoins the northwest side of the rear tunnel and contains a circular manhole opening and a compact ladder glyph made from two parallel lines with short rungs. The southern outlet opens directly into a small exterior receiving area. Keep the main passage continuous and clear, with no furniture, gates, stairs, or invented obstructions. Fill the main passage with solid pale cyan, the rear tunnel with solid pale blue, the west feeder with solid pale mint, the east feeder with solid pale lavender, the maintenance shaft with solid pale beige, and the exterior receiving area with solid pale gray. These colors identify permanent spatial areas, not water levels. No gradients, blending, or drop shadows. Show passage connections as plain wall gaps, not swinging doors. Place one small white circle with a black number for each of the following, each number appearing exactly once: 1 in the main passage; 2 in the rear tunnel; 3 in the west feeder; 4 in the east feeder; 5 in the exterior receiving area; 6 beside the opening between the rear tunnel and main passage; 7 beside the west feeder mouth; 8 beside the east feeder mouth; 9 beside the southern outlet mouth; 10 in the maintenance shaft; 11 beside the circular manhole opening; 12 beside the ladder glyph. Separate nearby number circles enough to remain legible. Do not draw number 13: it belongs exclusively to a separate transient flood overlay. Do not depict water surfaces, surge fronts, waves, bubbles, spray, debris, people, or changing flood levels. Do not draw camera symbols, viewing cones, flow arrows, dimensions, legends, or explanatory text. Only the numbered circles and an optional small north arrow with N are permitted as annotations.", "key_elements": [ "Continuous main sewer passage linking the rear tunnel to an open exterior outlet.", "Opposing lateral feeder mouths provide schematic routes for seawater arriving from multiple directions.", "Rear maintenance shaft with manhole opening and fixed ladder.", "Permanent geometry remains unchanged between the initial surge and subsequent submerged view.", "Flood behavior is an overlay only; pastel fills identify permanent areas.", "Exact feeder arrangement and shaft placement are schematic choices, not surveyed facts; earlier sewer scenes do not establish an exact shared junction." ], "numbered_elements": [ { "number": 1, "label": "Main sewer passage", "category": "area", "position_hint": "central north-south passage", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Rear tunnel", "category": "area", "position_hint": "north end, continuing beyond the main passage", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "West feeder passage", "category": "area", "position_hint": "west of the northern junction", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "East feeder passage", "category": "area", "position_hint": "east of the northern junction", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Exterior receiving area", "category": "area", "position_hint": "immediately south of the outlet", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Rear tunnel opening", "category": "opening", "position_hint": "connection between rear tunnel and northern main passage", "base_layer_decision": "base_opening" }, { "number": 7, "label": "West feeder mouth", "category": "opening", "position_hint": "west wall at the northern junction", "base_layer_decision": "base_opening" }, { "number": 8, "label": "East feeder mouth", "category": "opening", "position_hint": "east wall at the northern junction", "base_layer_decision": "base_opening" }, { "number": 9, "label": "Exterior outlet mouth", "category": "opening", "position_hint": "south end of the main passage", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Maintenance shaft", "category": "area", "position_hint": "northwest side of the rear tunnel", "base_layer_decision": "base_structural_unit" }, { "number": 11, "label": "Manhole opening", "category": "opening", "position_hint": "within the maintenance shaft footprint, overhead access represented in plan", "base_layer_decision": "base_opening" }, { "number": 12, "label": "Fixed access ladder", "category": "prop", "position_hint": "shaft wall beneath the manhole opening", "base_layer_decision": "base_persistent_fixture" }, { "number": 13, "label": "Seawater inundation", "category": "area", "position_hint": "rear and lateral entries through the main passage toward the exterior outlet; surge and full submersion are shot-dependent", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L176B01", "sub_location": "flooded_sewer_passage", "camera_position": "Inside the southern portion of number 1, just north of number 9, facing north toward number 6 and number 2, with numbers 7 and 8 flanking the distant junction.", "camera_height": "Fixed approximately standing eye level above the passage floor; a typical staging height of about 1.5 m, not a measured site dimension.", "lens_hint": "28mm wide angle", "framing_notes": "Keep the same camera position and orientation for both shots. Emphasize the rear opening and lateral mouths. For S36_Shot4, overlay number 13 as a sudden incoming surge behind the action; for S36_Shot7, use the same overlay marker for a fully submerged view, changing water level and motion rather than architecture. Number 9 and number 5 lie behind the camera and establish the continuing escape route. The elevated manhole and shaft fixtures need not appear in this tunnel-facing composition.", "use_numbered_elements": [ 1, 2, 6, 7, 8, 13 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scope is an underground sewer level, not a storeyed building; the text does not establish additional stacked sewer levels or the height of any structure above. A person-passable municipal trunk passage approximately 2–4 m wide and 2–3 m clear high is a conservative typical staging range for inherited contemporary infrastructure, not a specified measurement; passage length is unspecified. The manhole shaft and fixed ladder extend from the sewer to surface access, but their full vertical distance is unspecified and should not be reduced to a short interior ladder. Multiple water entry routes and an exterior escape are supported, but the exact inlet count and placement are schematic; the flood can fill the full tunnel cross-section and continue beyond the outlet.", "applied_shots": [ "S36_Shot4", "S36_Shot7" ], "group_id": "bg_sewer_and_manhole", "depends_on_fp": [] }, "fp_l177_road_manhole": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact post-disaster urban street and adjoining alley corner. Use inherited Korean neighborhood layout conventions: a modest continuous roadway, a narrower perpendicular side alley, close-set street-front boundaries, roadside lamp posts, and a circular road manhole. This is a simple architectural CAD-style reference map, not an artwork. Use single-weight black outlines, geometric shapes only, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nOrient north toward the top. Run the main road vertically through the left-center of the square, continuing beyond both the north and south image edges. Keep its width sufficient for a large vehicle and a narrow pedestrian clearance beside it. Connect a much narrower alley from the east edge to the road slightly below the diagram center. Outline two cropped street-front building footprints east of the road, one north of the alley and one south of it. Their corners form the alley mouth and provide an occluding corner for observation. Do not invent building interiors, facade openings, additional streets, or a sewer network. Leave the roadway unobstructed; vehicle approach and stopping positions are metadata, not permanent road markings.\n\nUse a single flat pastel fill per distinct area: pale cool gray for the road, pale beige for the alley, pale blue for the northern building footprint, and pale lavender for the southern building footprint. No gradients, blending, or drop shadows. Show the manhole as a simple circular rim within the southern portion of the road, slightly west of the road centerline and south of the alley mouth. Do not depict its temporary open or closed state. Show three schematic lamp-post footprints along the eastern road edge: one toward the north end, one immediately north of the alley mouth, and one south of the alley mouth. Each lamp is only a small geometric plan symbol, without illumination.\n\nPlace one small white circle with a black integer at each persistent element, with each integer appearing exactly once: 1 inside the main road; 2 inside the alley; 3 inside the northern building footprint near its alley-facing corner; 4 inside the southern building footprint near its alley-facing corner; 5 at the manhole rim; 6 at the northern lamp post; 7 at the lamp post immediately north of the alley mouth; 8 at the southern lamp post. Keep the manhole rim and lamp symbols distinguishable from their numbered circles. Draw only markers 1 through 8. Do not draw overlay markers 9 through 11, vehicles, people, birds, displaced manhole covers, headlight beams, lamp flicker, skid marks, flooding, or event trails. No text labels, dimensions, legends, camera icons, field-of-view cones, or movement arrows inside the drawing. A small N with a north arrow in one corner is allowed.", "key_elements": [ "Continuous main road with an unobstructed north-to-south vehicle approach", "Narrow east-side alley opening onto the road", "Two persistent street-front corners framing the alley mouth", "Road manhole south of the alley junction", "Roadside lamp-post sequence with fixed positions independent of flicker state", "Vehicle, headlight backlight, and lamp flicker reserved for background overlays" ], "numbered_elements": [ { "number": 1, "label": "Main road", "category": "area", "position_hint": "Left-center of plan, running north to south beyond both image edges", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Side alley", "category": "area", "position_hint": "East side, joining the road slightly south of diagram center", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Northern street-front footprint", "category": "area", "position_hint": "East of the road and north of the alley; southwest corner borders the alley mouth", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Southern street-front footprint", "category": "area", "position_hint": "East of the road and south of the alley; northwest corner borders the alley mouth", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Manhole access rim", "category": "opening", "position_hint": "Southern road section, slightly west of centerline and south of the alley mouth", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Northern streetlight", "category": "prop", "position_hint": "Eastern road edge toward the north end of the mapped stretch", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Junction streetlight", "category": "prop", "position_hint": "Eastern road edge immediately north of the alley mouth", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "Southern streetlight", "category": "prop", "position_hint": "Eastern road edge south of the alley mouth, near the manhole section", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "Arriving large vehicle", "category": "prop", "position_hint": "On the road north of the alley mouth, facing south; approaches from the north and stops with its front near the junction", "base_layer_decision": "state_overlay_transient_object" }, { "number": 10, "label": "Headlight backlight", "category": "prop", "position_hint": "Originates at the south-facing front of vehicle 9 and extends along the road, leaving the recessed alley comparatively dark", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 11, "label": "Streetlight flicker sequence", "category": "prop", "position_hint": "State changes at fixtures 6, 7, and 8 following movement along the road; not a permanent illumination pattern", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L177B01", "sub_location": "road_manhole_and_alley_corner", "camera_position": "Just inside number 2 (side alley), close to number 4 (southern street-front corner), facing diagonally northwest across number 1 (main road) toward the vehicle approach north of number 7 (junction streetlight).", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Use the same fixed view for vehicle approach, exit, and boarding surveillance. Include number 4 as a near-frame occluding edge and number 3 across the alley mouth. Keep the northward approach visible, with number 5 near the lower-left foreground and the lamp sequence readable along the road edge. Overlay number 9 at its moment-specific position, number 10 as strong vehicle backlight, and number 11 as changing lamp states rather than all lamps permanently illuminated. Keep the alley recess dark without changing its geometry.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The text does not specify adjacent building heights; roughly one to four storeys with approximately 2.5–3.5 m per storey is a conservative typical range for inherited low-rise Korean neighborhood frontage, not a confirmed site measurement. A road approximately 5–8 m wide and an alley approximately 2–3 m wide are typical layout allowances rather than measured dimensions; preserve clearance for the explicitly described large vehicle. The adjacent footprints are cropped boundary masses, so their full extent and facade opening counts remain unspecified; the three drawn streetlights are a schematic placement choice, not a source-confirmed total. The manhole connects down to a below-road sewer, but its shaft depth and ladder extent are unspecified, and no underground route or later flooding should be inferred into this surface plan.", "applied_shots": [ "S27_Shot12", "S27_Shot18", "S27_Shot21" ], "group_id": "bg_sewer_and_manhole", "depends_on_fp": [] }, "fp_rescue_van_interior": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an intact, conventional left-hand-drive passenger-and-cargo van interior. This is a simple layout reference, not an illustration or a rendered vehicle. Use single-weight black outlines, geometric symbols, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Orient the vehicle front toward the top of the page and the driver side toward the left. Show a narrow elongated vehicle-body outline with a slightly rounded front. Fill the front cabin with one solid pale cyan color and the rear seating-and-cargo area with one solid pale yellow color; do not blend colors. Derive the layout from a conventional manually driven van retained in a future disaster-affected Korean setting, not a futuristic cockpit or a purpose-built ambulance. Keep the cabin and rear compartment connected without a solid partition. Place the dashboard across the front beneath the windshield, the steering wheel on the left, and two front seats behind it. Place a simple transverse rear bench in the rear half, leaving generous unoccupied floor space between the front seats and rear bench and behind the bench. The rear bench is a schematic seating convention, not a claim about an exact vehicle model. Represent seats as rectangles with simple backrest and cushion divisions, the dashboard as a narrow rectangle, and the steering wheel as a small circle. Represent front doors with simple door lines and swing arcs, and glazing with double parallel lines along the body boundary. Separate the driver-window marker from the driver-door marker so both remain legible. Draw exactly one small numbered circle for each of the following base elements: 1 front cabin area, 2 rear seating-and-cargo area, 3 front windshield, 4 driver-side front door, 5 driver-side window opening, 6 passenger-side front door, 7 passenger-side window, 8 dashboard, 9 steering wheel, 10 driver seat, 11 front passenger seat, and 12 rear bench. Each number must appear exactly once in black inside its circle. Do not draw marker 13 or any boxes, hiding figures, hiding-gap annotations, checkpoint personnel, roadblocks, damage, illumination states, or other transient content; these belong to a separate background overlay. The roof and its accessory are outside this interior floor-plan scope. Do not add medical fittings, advanced interfaces, furniture, or extra openings. Only the optional area labels 'Cabin Zone' and 'Rear Zone' may appear besides the numbered circles. No legend, dimensions, camera icons, field-of-view cones, camera arrows, or other annotations.", "key_elements": [ "Intact, left-hand-drive van with a conventional manual-driving cabin", "Front windshield and driver-side window provide distinct checkpoint sightlines", "Continuous connection between the front cabin and rear seating area", "Fixed front seats and schematic rear bench leave usable rear floor space", "Sparse loose boxes and the resulting hiding gaps are supplied only through the background overlay", "Roof-mounted accessory remains outside the interior plan scope" ], "numbered_elements": [ { "number": 1, "label": "Front cabin", "category": "area", "position_hint": "front portion of the vehicle, at the top of the plan", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Rear seating and cargo area", "category": "area", "position_hint": "rear portion of the vehicle, below and connected to the cabin", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Front windshield", "category": "opening", "position_hint": "front boundary, spanning the cabin above the dashboard", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Driver-side front door", "category": "opening", "position_hint": "left body boundary beside the driver seat", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Driver-side window opening", "category": "opening", "position_hint": "left cabin boundary within the driver-side door", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Passenger-side front door", "category": "opening", "position_hint": "right body boundary beside the front passenger seat", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Passenger-side window", "category": "opening", "position_hint": "right cabin boundary within the passenger-side door", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Dashboard", "category": "furniture", "position_hint": "across the front cabin immediately behind the windshield", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "Steering wheel", "category": "furniture", "position_hint": "left end of the dashboard, directly ahead of the driver seat", "base_layer_decision": "base_persistent_fixture" }, { "number": 10, "label": "Driver seat", "category": "furniture", "position_hint": "front-left cabin, facing the windshield", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Front passenger seat", "category": "furniture", "position_hint": "front-right cabin, facing the windshield", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Rear bench", "category": "furniture", "position_hint": "transverse seating in the rear half, with floor clearance ahead and behind", "base_layer_decision": "base_persistent_furniture" }, { "number": 13, "label": "Sparse boxes with hiding gaps", "category": "prop", "position_hint": "distributed loosely through the rear seating area, leaving concealment gaps for three occupants without tightly filling the compartment", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L179B01", "sub_location": "van_interior", "camera_position": "Inside number 2 near the rear-right corner, behind number 12, facing forward and slightly left toward number 10, number 5, and number 3.", "camera_height": "Approximately 1.2-1.4m above the vehicle floor, a typical low interior viewpoint", "lens_hint": "24mm wide angle, avoiding fisheye distortion", "framing_notes": "Use the same rear-to-front composition across the referenced shots. Include number 12 and the overlay boxes at number 13 in the lower foreground, preserving gaps rather than making a solid cargo wall. Keep number 3 and the lowered window at number 5 readable as separate sightlines. The checkpoint roadblock belongs beyond number 3, and the inspecting figure belongs outside number 5; neither is part of the floor-plan layer. Preserve the undamaged interior and unchanged box arrangement. Do not depict hidden occupants through opaque seats or boxes.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This is a single-level vehicle interior, not a building; a conventional passenger-and-cargo van typically has an overall footprint around 4.5-6m long by 1.7-2.1m wide and an overall height around 2-2.7m, but the text specifies no dimensions or vehicle model. Typical usable interior height is roughly 1.3-1.9m, and the rear layout must accommodate three concealed occupants among sparse boxes without shrinking their bodies to fit. The windshield and driver-side window are explicitly supported; the paired front-door arrangement and schematic rear bench are conventional layout assumptions, not verified opening or seat-row counts. A cross-shaped halogen accessory is explicitly mounted above the roof, but its size is unspecified and it must not be relocated into the cabin.", "applied_shots": [ "S28_Shot2", "S28_Shot5", "S28_Shot7" ], "group_id": "bg_rescue_van", "depends_on_fp": [] }, "fp_basement_prayer_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a modest basement prayer room in an adapted contemporary church building in a future disaster-affected Korean setting. Use existing ordinary room geometry and sparse older equipment, not futuristic furnishings. The image must resemble a clean architectural CAD plan: single-weight black outlines, geometric symbols, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nArrange one simple rectangular prayer room with north at the top. Fill its entire shared interior with one solid pale yellow pastel. Attach a compact straight stair-access bay at the southwest, filled solid pale beige; represent its stair treads with parallel lines. Its lower landing opens directly into the room through a wall gap. The stairs connect upward to the church level, which is outside this drawing. Place a wall-mounted cross anchor at the middle of the north wall, represented only by a small wall-attached rectangular plan glyph. Place a small rectangular table slightly north of the room center, with one chair on its west side and one on its east side. Keep generous open circulation south of the table. Place a small reed organ against the northwest wall, shown as a compact rectangle with a narrow keyboard strip. Place an old radio as a small rectangular equipment symbol in the northeast corner. Place two simple circular lantern equipment symbols at stable perimeter stations, one along the west wall below the organ and one along the east wall south of the radio. These are schematic continuity anchors, not an assertion of the total lantern count. At the southeast corner, place a discreet gap in the east wall for a secret passage mouth. Beyond it, show only a short narrow passage stub filled solid pale gray; do not invent its route or exterior destination. Leave a continuous unobstructed route from the stair landing through the southern room to this passage mouth. Do not draw this route as an arrow or trail. The perimeter walls are intact, with no damage or intrusion marks. Do not add basement windows, an altar, pews, storage cabinets, an organ bench, or an invented secret-door mechanism.\n\nUse small circles containing black numbers, each appearing exactly once: 1 in the prayer room's open floor; 2 in the stair-access bay; 3 beside the stair-to-room opening; 4 beside the north-wall cross anchor; 5 on the table; 6 beside the west chair; 7 beside the east chair; 8 on the organ; 9 beside the northeast radio; 10 beside the west lantern station; 11 beside the east lantern station; 12 beside the secret passage mouth; 13 inside the passage stub. Draw only these base markers. Do not draw marker 14 or its object. All equipment is shown with simple top-down geometric glyphs, never elevations or miniature perspective drawings. No people, handheld objects, candles being carried, emitted light, blue glow, radio activation effects, evacuation cues, camera icons, field-of-view cones, dimensions, legends, or annotations. No text inside the image except the numbered circles.", "key_elements": [ "Sparse rectangular basement prayer room with intact perimeter walls", "Southwest stair access connecting to the church level above", "North-wall cross and a small central table with two chairs", "Northwest reed organ and northeast radio corner", "Stable perimeter lantern stations; illumination changes remain shot-specific", "Southeast secret passage mouth with an unobstructed approach", "Only the passage entrance stub is mapped; the escape route beyond is unspecified" ], "numbered_elements": [ { "number": 1, "label": "Prayer room", "category": "area", "position_hint": "main rectangular shared interior", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Stair access", "category": "area", "position_hint": "southwest bay, connecting upward to the church level", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Stair landing opening", "category": "opening", "position_hint": "between the southwest stair landing and the prayer room", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Wall cross", "category": "prop", "position_hint": "middle of north wall", "base_layer_decision": "base_persistent_fixture" }, { "number": 5, "label": "Small table", "category": "furniture", "position_hint": "slightly north of room center", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "West chair", "category": "furniture", "position_hint": "west side of the small table", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "East chair", "category": "furniture", "position_hint": "east side of the small table", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Small reed organ", "category": "furniture", "position_hint": "northwest wall, keyboard facing into the room", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Radio home position", "category": "prop", "position_hint": "northeast corner; persistent equipment anchor, movable during performance", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "West lantern station", "category": "prop", "position_hint": "west perimeter below the organ, clear of the stair approach", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "East lantern station", "category": "prop", "position_hint": "east perimeter between the radio corner and passage approach", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Secret passage mouth", "category": "opening", "position_hint": "east wall at the southeast corner", "base_layer_decision": "base_opening" }, { "number": 13, "label": "Passage entrance stub", "category": "area", "position_hint": "immediately east of the secret passage mouth", "base_layer_decision": "base_structural_unit" }, { "number": 14, "label": "Evacuation flashlight", "category": "prop", "position_hint": "carried along the southern open floor toward the secret passage; no fixed storage position", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L180B02", "sub_location": "basement_prayer_room", "camera_position": "Just inside number 3, near the southwest edge of number 1, facing northeast toward number 5 and number 9.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "24–28mm wide angle", "framing_notes": "Maintain one shared room orientation across the listed shots. Include number 4 above the table, number 8 on the left, and number 9 in the far-right corner; retain numbers 10 and 11 as stable equipment anchors. Number 12 can sit unobtrusively at the right edge without an escape emphasis. Candlelight, blue emission, lantern brightness, and radio operation are shot-specific effects, not permanent background features. If the radio is held in a shot, move the same radio from number 9 rather than duplicate it.", "use_numbered_elements": [ 1, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ], "ignore_numbered_elements": [ 14 ] }, { "bg_id": "L180B01", "sub_location": "basement_prayer_room_secret_passage", "camera_position": "Near the western side of number 5 within number 1, facing southeast across the open floor toward number 12 and number 13.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Emphasize the unobstructed approach to numbers 12 and 13. Keep number 5 and its chairs along the foreground edge and number 11 against the east wall to preserve room continuity. Number 14 is a mobile foreground or midground overlay associated with the person leading the evacuation, never a fixed wall light. Preserve the existing furniture positions and intact walls; do not add forced-entry damage, floor trails, or evacuation arrows.", "use_numbered_elements": [ 1, 5, 6, 7, 11, 12, 13, 14 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The text establishes a basement prayer room connected by stairs to the church's ground floor; the total number of storeys and overall building height are unspecified. A roughly 20–40 square metre room with approximately 2.3–3.0 m clear height is a conservative typical range for a modest adapted church basement, not a measured specification. The stair connection spans the basement-to-ground-floor level change; its exact rise, tread count, and configuration are not supplied. No basement windows are established, and the small viewing window described in the scene belongs to the upstairs church entrance, outside this plan. The secret passage continues toward an exterior escape, but its length, vertical changes, and final exit geometry remain unspecified.", "applied_shots": [ "S29_Shot6", "S30_Shot5", "S30_Shot10", "S30_Shot17", "S32_Shot5", "S32_Shot8", "S32_Shot9" ], "group_id": "bg_urban_church", "depends_on_fp": [] }, "fp_ground_floor_entrance": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a small ground-floor church entrance and its immediately adjoining outdoor approach. Use a clean architectural CAD-plan appearance: single-weight black outlines, geometric symbols, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only solid flat pastel area fills with no blending or drop shadows. Place a compact rectangular interior entrance in the lower half, filled pale yellow; a narrow threshold across the central exterior-wall doorway, filled pale beige; and a modest outdoor approach above the doorway, filled pale gray. The geometry should suggest a retained modest contemporary church entrance in a future disaster-affected Korean setting, without invented futuristic equipment or decorative architectural motifs. Leave the interior unfurnished and maintain clear access to the door. Show the enclosing entrance walls and a simple framed doorway centered on the upper boundary of the interior. Use a single hinged door leaf with a conventional swing arc; this is an opening-convention symbol, not a depiction of its momentary open angle. Indicate the small viewing hatch as a short double-line inset within the door-leaf symbol, symbolically locating an opening in the door rather than drawing another floor-level passage. Keep enough clear outdoor space directly beyond the threshold for an encounter, but draw no people. Place small circles with black numbers exactly once each: 1 inside the entrance enclosure, 2 on the threshold, 3 in the outdoor approach, 4 beside the hinged door symbol, 5 beside the inset viewing-hatch symbol, and 6 beside the doorway frame. Separate the circles sufficiently to remain legible. Only these six numbered markers may appear. Do not draw marker 7 or any transient door-state cue. No basement, stairs, prayer-room furniture, organ, radio, candles, aircraft, damage cues, or event effects. No camera icons, sightline arrows, field-of-view cones, dimensions, legend, or other annotations. Optional area text is limited to Shared Zone, Threshold Zone, and Exterior Zone. Do not draw elevations, storeys, or height indicators.", "key_elements": [ "Ground-floor interior entrance, separate from the basement prayer room", "Framed hinged church door containing a small operable viewing hatch", "Narrow threshold connecting the entrance directly to the outdoor approach", "Clear outward view constrained by the nearby door frame and door leaf", "Unfurnished entrance with three distinct flat pastel area fills", "Momentary narrow door opening reserved for the background overlay" ], "numbered_elements": [ { "number": 1, "label": "Interior entrance enclosure", "category": "area", "position_hint": "lower half of the plan, inside the exterior entrance wall", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entrance threshold", "category": "area", "position_hint": "central narrow strip between the interior entrance and outdoor approach", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Outdoor approach", "category": "area", "position_hint": "upper half of the plan, immediately outside the church door", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Hinged entrance door", "category": "opening", "position_hint": "center of the exterior wall at the north edge of the interior entrance", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Door viewing hatch", "category": "opening", "position_hint": "within the entrance door leaf, represented symbolically in plan", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Entrance door frame", "category": "opening", "position_hint": "around the central doorway separating the interior and exterior", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Narrowly ajar door state", "category": "prop", "position_hint": "at the entrance door, leaving a restricted gap beside the frame toward the outdoor approach", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L182B01", "sub_location": "ground_floor_entrance", "camera_position": "Inside number 1, close to the inner jamb of number 6, facing outward across number 2 toward number 3 through the narrow gap at number 4.", "camera_height": "Approximately 1.4 m, a suggested peeking viewpoint adjusted to the observer and hatch placement", "lens_hint": "50mm normal lens for a restricted, close-framed outward view", "framing_notes": "Keep number 6 and the edge of number 4 prominent in the foreground. Apply number 7 only in the background overlay. Show a limited portion of number 3 beyond the gap, leaving space for two people facing each other outside without baking them into the background. Retain number 5 on the visible door leaf where framing permits. Night is a background treatment, not a floor-plan effect. Do not substitute the basement or add aircraft from the separate sky insert.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The text establishes a ground-floor entrance and a basement below it, connected elsewhere by stairs; the total above-ground storey count and overall church height are unspecified. A compact entrance footprint of roughly 2–4 m across and 2–4 m deep, with a ceiling around 2.4–3.5 m, is a typical conservative layout assumption for a modest retained contemporary church entrance, not a stated measurement. The scoped entrance has one described church doorway containing one small operable viewing hatch; the hatch is above floor level for looking outside, but its exact height and the opening counts elsewhere on the facade are unspecified. No exterior step or threshold level change is established, and the basement stair run remains outside this plan.", "applied_shots": [ "S29_Shot10" ], "group_id": "bg_urban_church", "depends_on_fp": [] }, "fp_third_floor_corridor": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan: a clean architectural CAD-style layout using single-weight black outlines, geometric shapes, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use ordinary retained administrative-building geometry appropriate to a future disaster-affected Korean setting, not speculative futuristic architectural decoration. Show a long, straight east-west corridor, a detention-room entrance along its south side toward the west, a continuous exterior window bank along the north wall, a small extinguisher station in the southwest corridor corner, and onward stair access at the east end. The orientation and window-bank subdivision are schematic layout conventions, not surveyed facts. Show only the entrance portion of the detention room; do not invent an interrogation-room furnishing arrangement. Keep the passage unobstructed. Fill the shared corridor with one solid pale yellow, the detention-room entrance portion with one solid pale blue, the doorway threshold with one solid pale beige, the extinguisher station with one solid pale cyan, and the stair landing and stair enclosure with one solid pale gray. No gradients, blending, or drop shadows. Place these small numbered circles, each containing a black integer exactly once: 1 in the corridor; 2 inside the detention-room entrance portion; 3 at its threshold; 4 beside its door assembly; 5 beside the north-wall window bank; 6 at the southwest extinguisher station; 7 on the east stair landing; 8 beside the open passage into that landing; 9 inside the return-stair footprint; 10 beside a small wall-mounted alarm fixture immediately east of the detention doorway. Draw the door as a simple leaf line and swing arc opening outward into the corridor, hinged at the west jamb; its swing arc communicates clearance only, not a scene-specific door state. Draw the window bank as double parallel lines within the north wall. Draw the extinguisher station as a small outlined storage footprint and bracket, without a loose extinguisher. Draw stairs as flat parallel tread lines with a return landing, without elevation or direction arrows. Draw the alarm fixture as a small plain rectangle with no glow. Draw only base markers 1 through 10. Do not draw markers 11 through 18, damage, displaced equipment, flashing light, an approaching sea, broken glass, water, people, or action cues. No text labels, legend, dimensions, camera icons, field-of-view cones, or annotations inside the image. Do not draw additional storeys, elevations, or heights.", "key_elements": [ "Straight third-floor administrative corridor with a clear route from the detention doorway to onward stairs.", "Detention entrance on the south side, with an outward-swinging door and a persistent threshold.", "Exterior window bank on the north side, retaining the same frame position before and during the wave impact.", "Persistent corner extinguisher station distinguished from the temporarily displaced extinguisher.", "East-end landing and return stairs connecting to higher floors.", "Fixed alarm fixture separated from shot-controlled flashing illumination.", "Door damage, displaced equipment, approaching water, shattered glazing, and inundation belong exclusively to state overlays." ], "numbered_elements": [ { "number": 1, "label": "Third-floor corridor", "category": "area", "position_hint": "long east-west shared circulation strip", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Detention-room entrance portion", "category": "area", "position_hint": "south of the corridor, toward its west end", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Detention threshold", "category": "area", "position_hint": "between the detention-room entrance portion and corridor", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Detention door assembly", "category": "opening", "position_hint": "south corridor wall at number 3, west-jamb hinge and east-jamb latch", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Exterior window bank", "category": "opening", "position_hint": "north corridor wall, opposite the detention entrance and extending toward the stairs", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Extinguisher station", "category": "prop", "position_hint": "southwest corridor corner, west of the detention doorway", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Stair landing", "category": "area", "position_hint": "east end of the corridor", "base_layer_decision": "base_structural_unit" }, { "number": 8, "label": "Stair access passage", "category": "opening", "position_hint": "east corridor end, opening directly onto number 7", "base_layer_decision": "base_opening" }, { "number": 9, "label": "Return stair", "category": "area", "position_hint": "east of number 7, with adjacent flights and a return landing", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Alarm fixture", "category": "prop", "position_hint": "south corridor wall immediately east of number 4", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Closed-door impact damage", "category": "prop", "position_hint": "localized around the east-jamb latch of number 4; door remains closed", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 12, "label": "Extinguisher used at latch", "category": "prop", "position_hint": "temporarily displaced from number 6 to the corridor side of number 4", "base_layer_decision": "state_overlay_transient_object" }, { "number": 13, "label": "Broken latch and opened door", "category": "prop", "position_hint": "number 4, with broken handle hardware and leaf opened outward", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 14, "label": "Flashing red alarm illumination", "category": "prop", "position_hint": "originates at number 10 and intermittently affects the corridor", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 15, "label": "Approaching sea outside", "category": "prop", "position_hint": "beyond number 5, visible through still-intact glazing before impact", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 16, "label": "Shattering window glazing", "category": "prop", "position_hint": "within number 5, preserving the established frame location", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 17, "label": "Flying glass fragments", "category": "prop", "position_hint": "inside number 1 immediately south of number 5", "base_layer_decision": "state_overlay_transient_object" }, { "number": 18, "label": "Wave entering corridor", "category": "prop", "position_hint": "crossing number 5 from north to south and filling number 1", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L188B02", "sub_location": "detention_door_approach", "camera_position": "In number 1 just northeast of number 3, facing southwest toward the latch of number 4, with number 6 farther left.", "camera_height": "eye-level standing, approximately 1.5 m", "lens_hint": "40mm moderate wide angle", "framing_notes": "Prioritize the closed door, latch impact point, and displaced red extinguisher. Damage is localized, not a breached doorway. The window bank remains intact even if outside the frame. Do not show an open door, inundation, or scattered glass.", "use_numbered_elements": [ 1, 3, 4, 6, 10, 11, 12 ], "ignore_numbered_elements": [ 13, 14, 15, 16, 17, 18 ] }, { "bg_id": "L188B01", "sub_location": "corridor_escape_route", "camera_position": "Near the west end of number 1, east of number 6, facing east along the corridor with numbers 3 and 4 on the right, number 5 on the left, and numbers 7 through 9 ahead.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "24mm wide angle", "framing_notes": "Use one stable camera for the reunion, alarm, and pre-impact escape shots. Keep the opened detention door and onward stairs legible. Number 14 is shot-controlled intermittent illumination, not permanent red lighting. Number 15 applies only when the approaching sea becomes visible in the later pre-impact shot; do not introduce it during the reunion. All glazing remains intact throughout this background state.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 7, 8, 9, 10, 13, 14, 15 ], "ignore_numbered_elements": [ 11, 12, 16, 17, 18 ] }, { "bg_id": "L188B03", "sub_location": "corridor_window_impact", "camera_position": "At number 7 beside number 8, facing west-northwest into number 1 toward number 5, with the opened number 4 along the opposite side of the corridor.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "24mm wide angle", "framing_notes": "Preserve the corridor walls, door location, and window-frame alignment established earlier. Show actual water breaking through the glazing, flying glass, and a massive inward-moving wave; this is a physical event, not a dream or projection. The previously broken latch and opened door persist where visible. Do not invent structural collapse of the stairs or relocate the window openings.", "use_numbered_elements": [ 1, 3, 4, 5, 7, 8, 10, 13, 16, 17, 18 ], "ignore_numbered_elements": [ 11, 12, 14, 15 ] } ], "scale_guideline": "The corridor is explicitly on the third floor, and the escape continues toward higher floors, so the building extends above the third storey; its total storey count and overall height are unspecified. For retained administrative construction, a typical floor-to-floor range of roughly 3–4 m and corridor width of roughly 1.5–2.5 m are conservative spatial guides, not scene measurements. The footprint is a narrow linear circulation zone with an adjoining room entrance and stair bay; its exact length and window count are unspecified, and the drawn window bank is a schematic grouping rather than a verified facade count. The stairs must connect the third-floor landing with higher levels, while the alarm fixture sits above normal standing eye level; neither their full vertical extent nor precise mounting height is given.", "applied_shots": [ "S34_Shot3", "S34_Shot7", "S34_Shot10", "S37_Shot4", "S37_Shot5" ], "group_id": "bg_refugee_administration", "depends_on_fp": [] }, "fp_third_floor_detention_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan: a simple architectural CAD-style room-layout diagram using single-weight black outlines, geometric shapes, and a white background. Show only a compact rectangular detention/interrogation room and a narrow adjoining corridor strip along its north wall. Derive the layout from an ordinary administrative office reused for detention in a future disaster-affected Korean setting: conventional corridor access and plain movable chairs, not a futuristic laboratory or a purpose-built prison cell. Fill the room with one solid pale blue pastel color and the corridor with one solid pale beige pastel color. Keep these fills uniform, without blending. Place a single hinged doorway toward the east end of the shared north wall, opening outward into the corridor; depict its leaf and swing with a simple line and arc. Leave a clear route from the doorway to the seating. Place two simple chair glyphs near the room center, on an east-west axis, facing each other across an empty gap. Each chair is a small square seat with a short backrest line on its outer side. Do not add an interrogation table, bed, bars, surveillance equipment, or unsupported fixtures. Place exactly five small numbered circles, each containing a black integer appearing once: 1 in an unobstructed part of the room, 2 in the corridor strip, 3 beside the doorway, 4 beside the west chair facing east, and 5 beside the east chair facing west. These are persistent base-layer markers only. No other text is needed. Do not draw people, injuries, blood, wall marks, broken hardware, debris, floodwater, displaced objects, or other event-state cues. The door and room remain intact. Do not draw camera icons, viewing cones, camera arrows, dimensions, legends, elevations, or additional storeys. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Compact administrative room reused for detention on the third floor.", "Two opposing interrogation chairs with an empty gap and no assumed table.", "Single intact doorway connecting the room to the adjoining corridor.", "Unobstructed entry route; no blood, destruction, or later rescue and flood cues." ], "numbered_elements": [ { "number": 1, "label": "Detention room", "category": "area", "position_hint": "Main rectangular area south of the corridor", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Third-floor corridor", "category": "area", "position_hint": "Narrow strip adjoining the room's north wall", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Corridor doorway", "category": "opening", "position_hint": "East end of the room's north wall, swinging outward into the corridor", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Detainee chair", "category": "furniture", "position_hint": "West of room center, facing east toward number 5", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Interrogator chair", "category": "furniture", "position_hint": "East of room center, facing west toward number 4", "base_layer_decision": "base_persistent_furniture" } ], "camera_recommendations": [ { "bg_id": "L189B01", "sub_location": "third_floor_detention_room", "camera_position": "Inside number 1 near its southwest corner, facing northeast across numbers 4 and 5 toward number 3, with a limited glimpse of number 2 through the doorway.", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "32–35mm moderate wide angle", "framing_notes": "Keep both opposing chairs readable and the doorway unobstructed in the background for the arriving subordinate. Maintain the same layout across all assigned shots. The downstream background is electrically lit at night, but lighting is not represented in the plan. Keep the room and door intact; exclude blood, rescue damage, and flooding.", "use_numbered_elements": [ 1, 2, 3, 4, 5 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The room is on the third floor of a multistorey administrative building, with further floors above established by the later upward escape; the total storey count and overall height are unspecified. A floor-to-floor height of roughly 3–4 m and a room footprint around 3–5 m by 4–6 m are typical conservative administrative-office ranges, not stated measurements. One room-to-corridor doorway is established within this scope; room windows and facade opening counts are unspecified, and the later corridor windows should not be reassigned to this room. Higher floors and connecting stairs belong outside this cropped plan.", "applied_shots": [ "S31_Shot2", "S31_Shot8", "S31_Shot9" ], "group_id": "bg_refugee_administration", "depends_on_fp": [] }, "fp_chapel_search": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a chapel interior search area centered on a basement floor hatch. This is a local interior crop, not a complete building plan. Use a simple architectural CAD-plan appearance: single-weight black outlines, geometric symbols, and a white or off-white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Reflect a modest reused worship space in a future disaster-affected Korean setting through a plain rectangular room fragment and practical unobstructed circulation, without invented ceremonial architecture or futuristic equipment. Place straight wall segments along the north and east edges; leave the south and west edges open as crop limits, not doorways. Fill the shared chapel floor with one solid pale-yellow pastel color. Place a rectangular wooden basement hatch slightly east of the crop center, well away from both visible walls. Represent the hatch as a simple flush rectangular floor-opening outline with a short hinge-edge line; do not show a raised lid, stairwell interior, wood grain, or an ordinary wall-door swing arc. Surround the hatch with a broad pale-beige rectangular threshold and standing-clearance area, leaving especially generous clear floor to its south and west. This color boundary is not a wall, step, railing, or floor marking. Keep the hatch interior the same pale beige as its surrounding threshold area. Draw exactly three small circles containing black numbers, each appearing once: 1 on the shared chapel floor in the northwest portion, 2 inside the hatch footprint, and 3 in the clear standing area southwest of the hatch. The only optional area text is 'Shared Zone' and 'Threshold Zone'. Do not add any other text, dimensions, legends, camera symbols, field-of-view cones, or directional arrows. Do not invent pews, altar furniture, windows, entrance doors, loose objects, debris, damage marks, people, weapons, search beams, or event-state markers. Do not include aircraft, roads, exterior manholes, or other intercut locations.", "key_elements": [ "Local rectangular chapel interior crop with north and east wall segments", "Persistent flush wooden basement hatch, isolated from the visible walls", "Generous unobstructed standing and approach clearance around the hatch", "Flat pastel distinction between shared floor and hatch threshold area", "No transient search activity or unrelated intercut locations in the base diagram" ], "numbered_elements": [ { "number": 1, "label": "Chapel search floor", "category": "area", "position_hint": "Shared interior floor, with marker northwest of the hatch; north and east walls bound the visible crop", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Wooden basement hatch", "category": "opening", "position_hint": "Slightly east of the crop center, separated from both visible walls", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Hatch standing clearance", "category": "area", "position_hint": "Open floor surrounding the hatch, with the broadest approach space to its south and west", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L190B02", "sub_location": "chapel_basement_hatch", "camera_position": "On number 1 southwest of number 3, facing northeast toward number 2 with a downward tilt", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "28–35mm moderate wide angle", "framing_notes": "Keep number 2 clearly legible in the lower-middle frame and retain number 3 beside it for the pointing searcher added downstream. Include enough of number 1 and the wall-floor junction to establish an interior. The hatch is discovered, not explicitly opened; do not expose a basement interior. Nighttime search conditions belong to the background treatment, not this base diagram.", "use_numbered_elements": [ 1, 2, 3 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scene establishes a chapel floor with access to a basement below, but does not specify the building's total storey count or overall height. For this local crop, a floor span of roughly 4–6 m and an interior clear height of roughly 2.5–4 m are conservative typical working ranges for a modest adapted worship space, not stated measurements. The single hatch is a person-access opening; its dimensions, the descent arrangement, and basement height are unspecified. The diagram shows only the immediate search area and does not establish facade opening counts or a complete chapel footprint.", "applied_shots": [ "S33_Shot6" ], "group_id": "bg_combat_helicopter", "depends_on_fp": [] }, "fp_dump_truck_cab": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a heavy dump-truck cab, with the vehicle front at the top of the image. Use a clean architectural CAD-plan appearance: single-weight black outlines, a white background, simple geometric shapes, and small numbered circles. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show only the cab, not the cargo bed or a surrounding site plan. Use a compact, broad cab with a conventional left-hand driving position appropriate to right-side road traffic. Retain ordinary physical controls and a dashboard radio despite autonomous-driving capability; do not add holograms or elaborate speculative machinery. Fill the main occupant area uniformly pale yellow, the dashboard equipment strip uniformly pale cyan, and the two side-door threshold strips uniformly pale beige. These are flat solid fills without blending or drop shadows. Place circle 1 in the open central cab floor. Place the driver seat, circle 2, in the lower-left portion, facing the vehicle front; place a simple passenger seat, circle 3, opposite it on the right. Draw seats as rectangles with narrow backrest rectangles. Across the front, draw a shallow dashboard strip with circle 4. Place a simple steering-wheel ring with circle 5 between the driver seat and dashboard. Embed a small rectangular radio unit with circle 6 in the middle of the dashboard. Draw the broad windshield across the front boundary using double parallel lines and circle 7. Draw the left and right side windows as double parallel lines in their respective side boundaries, with circles 8 and 9. Indicate front-hinged left and right access doors with simple swing lines and arcs, with circles 10 and 11 positioned separately from the window markers; swing arcs describe opening geometry, not an event state. Keep all markers legible and non-overlapping. Draw each number from 1 through 11 exactly once, in a small circle with black numerals. No text labels, legends, dimensions, camera symbols, view cones, or directional arrows. Do not draw people, sleeping poses, loose cargo, road-motion effects, news captions, display-state messages, damage cues, shops, or parked-at-store surroundings. This image records only the persistent cab layout.", "key_elements": [ "Compact left-hand-drive heavy-truck cab with forward-facing seats", "Physical dashboard, steering wheel, and built-in radio retained alongside autonomous operation", "Broad front windshield and side-door windows providing road-facing sightlines", "Two front-hinged side access doors", "Flat pastel zoning and numbered base-layer geometry only", "Cargo bed, characters, and moment-specific road conditions excluded from the plan" ], "numbered_elements": [ { "number": 1, "label": "Cab interior", "category": "area", "position_hint": "central occupant floor enclosed by the cab shell", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Driver seat", "category": "furniture", "position_hint": "left side of cab, behind the steering wheel, facing image top", "base_layer_decision": "base_persistent_furniture" }, { "number": 3, "label": "Passenger seat", "category": "furniture", "position_hint": "right side of cab, aligned with the driver seat", "base_layer_decision": "base_persistent_furniture" }, { "number": 4, "label": "Dashboard", "category": "furniture", "position_hint": "front interior strip directly behind the windshield", "base_layer_decision": "base_persistent_fixture" }, { "number": 5, "label": "Steering wheel", "category": "prop", "position_hint": "front-left interior, between the driver seat and dashboard", "base_layer_decision": "base_persistent_fixture" }, { "number": 6, "label": "Built-in radio", "category": "prop", "position_hint": "central dashboard within reach of the driver", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Front windshield", "category": "opening", "position_hint": "broad opening across the front boundary at image top", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Driver side window", "category": "opening", "position_hint": "left cab boundary within the driver door", "base_layer_decision": "base_opening" }, { "number": 9, "label": "Passenger side window", "category": "opening", "position_hint": "right cab boundary within the passenger door", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Driver door", "category": "opening", "position_hint": "left cab boundary beside the driver seat, hinged toward the front", "base_layer_decision": "base_opening" }, { "number": 11, "label": "Passenger door", "category": "opening", "position_hint": "right cab boundary beside the passenger seat, hinged toward the front", "base_layer_decision": "base_opening" } ], "camera_recommendations": [ { "bg_id": "L194B01", "sub_location": "dump_truck_cab", "camera_position": "Near number 3 (passenger seat), facing diagonally left and slightly forward toward number 2 (driver seat), number 5 (steering wheel), and number 8 (driver side window).", "camera_height": "Approximately seated eye level, typically 1.1–1.3 m above the cab floor.", "lens_hint": "28mm wide angle", "framing_notes": "Frame the driver position in three-quarter profile so the shot can show drowsiness without obscuring the cab structure. Include number 4 and number 5 below, number 8 behind the driver, and an oblique portion of number 7 showing the road ahead. Number 6 may remain small within the dashboard; the news speaker is audio-only. Depict daytime travel under autonomous operation, not a stop outside a shop. Driver performance and changing exterior scenery belong to the shot, not the floor-plan image.", "use_numbered_elements": [ 1, 2, 4, 5, 6, 7, 8, 10 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This is a single occupied cab level raised above the road, not a multi-storey structure; exact vehicle dimensions are unspecified. A cab footprint roughly 2.3–2.5 m wide and 1.8–2.5 m front-to-back, with internal headroom around 1.5–1.9 m, is a typical conservative heavy-truck reference rather than a measured specification. The broad front windshield, paired side-door windows, paired access doors, and passenger seat are conventional layout assumptions; exact opening and passenger-seat counts are not stated in the scene. Keep the driver and road sightlines elevated relative to ordinary passenger cars, and do not infer a sleeper compartment or additional occupied deck.", "applied_shots": [ "S3_Shot2" ], "group_id": "bg_unstaffed_shop", "depends_on_fp": [] }, "fp_unstaffed_shop": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact unstaffed mixed-merchandise shop in a future disaster-affected Korean urban neighborhood. Use conventional compact street-front retail geometry and ordinary shelving and an ATM, not speculative holographic equipment. This is a simple architectural CAD-style reference map, not artwork. Use single-weight black outlines, geometric shapes, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nDraw a rectangular shop with the street-facing wall at the bottom and the rear wall at the top. Fill the shared merchandise floor pale yellow, the entrance threshold pale beige, the rear-left medicine corner pale mint, the rear-right ATM service area pale cyan, and the sheltered rear-central floor pocket pale blue. Each area has one uniform solid pastel fill, without blending or drop shadows. These are adjoining functional areas within one open shop, not separately enclosed rooms. Keep circulation continuous around the shelving.\n\nUse small white circles containing black numbers, each appearing exactly once, for the following persistent elements: 1 in the open shared sales-floor circulation space; 2 in the southwest entrance threshold; 3 at the entrance door in the south wall near the southwest corner; 4 on a short shoe-display shelf against the west wall immediately beyond the entrance; 5 on a bag-display shelf farther north along the west wall; 6 on an east-west grocery shelving island across the southern-middle floor; 7 on a second east-west merchandise shelving island across the northern-middle floor, with its east end stopping short of the ATM approach aisle; 8 in the northwest medicine corner; 9 on the medicine shelving against the north wall within that corner; 10 on a rectangular ATM cabinet against the northeast section of the north wall, with its operating front facing south; 11 on a short blanket-display shelf against the east wall immediately south of the ATM; 12 in the sheltered floor pocket between island 7 and the rear wall; 13 in the clear ATM approach area south of cabinet 10.\n\nArrange islands 6 and 7 so the entrance has a clear route along their east ends to the ATM. Island 7 must interrupt the direct entrance-to-rear-pocket sightline, allowing concealment behind upright shelving and a peek around its east end toward the door. Make the rear pocket and connecting aisles generous enough for several people and a bulky machine-bodied companion; do not make the hiding space a narrow slot. Keep the medicine corner accessible from the west aisle and the rear pocket. Use plain narrow rectangles with simple shelf divisions for shelving, a plain rectangle with a short front-edge line for the ATM, and a door leaf with a swing arc for the entrance. The door arc is an opening convention, not an event cue.\n\nDraw only base markers 1 through 13. Do not draw markers 14 through 16, ATM damage, merchandise depletion, loose cash, bags being carried, displaced objects, people, robots, motion cues, or event traces. All shelves remain upright and the shop layout remains intact. No camera symbols, sightline arrows, field-of-view cones, dimensions, legend, product labels, or other annotations. Only the numbered circles and optional short generic zone labels may appear as text.", "key_elements": [ "Compact open-plan street-front shop with a southwest entrance.", "Shoe and bag displays immediately accessible from the entrance-side aisle.", "Two upright crosswise merchandise islands with continuous end aisles.", "Rear-left medicine corner with permanent shelving.", "Rear-right ATM facing south, with an adjacent blanket display.", "Rear-central concealment pocket screened from the entrance by the northern shelving island.", "ATM penetration and selective merchandise depletion belong only to the background overlay; no generalized destruction." ], "numbered_elements": [ { "number": 1, "label": "Shared sales floor", "category": "area", "position_hint": "Open circulation space around the central shelving islands", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entrance threshold", "category": "area", "position_hint": "Southwest interior, immediately inside the entrance", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Shop entrance door", "category": "opening", "position_hint": "South wall near the southwest corner", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Shoe display", "category": "furniture", "position_hint": "West wall immediately north of the entrance threshold", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Bag display", "category": "furniture", "position_hint": "West wall north of the shoe display", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Grocery shelving island", "category": "furniture", "position_hint": "Southern-middle sales floor, running east-west", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Concealment shelving island", "category": "furniture", "position_hint": "Northern-middle sales floor, running east-west; mixed merchandise including a toy display", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Medicine corner", "category": "area", "position_hint": "Northwest corner, connected to the west aisle and rear pocket", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Medicine shelving", "category": "furniture", "position_hint": "North wall within the northwest medicine corner", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "ATM cabinet", "category": "prop", "position_hint": "Northeast section of the north wall, operating front facing south", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Blanket display", "category": "furniture", "position_hint": "East wall immediately south of the ATM", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Sheltered rear pocket", "category": "area", "position_hint": "Rear-central floor north of shelving island 7, accessible around its ends", "base_layer_decision": "base_structural_unit" }, { "number": 13, "label": "ATM approach area", "category": "area", "position_hint": "Northeast floor south of the ATM, connected to the east aisle", "base_layer_decision": "base_structural_unit" }, { "number": 14, "label": "ATM front penetration", "category": "prop", "position_hint": "Localized punched opening in the south-facing front of ATM 10; remains unrepaired", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 15, "label": "Sparse medicine stock", "category": "prop", "position_hint": "Selective gaps on medicine shelving 9 after remaining medication is taken", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 16, "label": "Selective merchandise gaps", "category": "prop", "position_hint": "Limited gaps on displays 4 and 5 and merchandise islands 6 and 7; fixtures remain upright", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L195B01", "sub_location": "shop_sales_floor", "camera_position": "Just inside the south wall, east of number 2 (entrance threshold), facing diagonally northeast toward number 7 (concealment shelving island) and number 10 (ATM cabinet).", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "24mm wide angle with restrained distortion", "framing_notes": "Use one consistent wide master background across all listed shots. Keep number 3 at the left foreground edge and the east aisle open toward numbers 10 and 11. Show the south-facing ATM front with overlay 14 unrepaired throughout. Number 7 must screen the interior of pocket 12 while leaving its east-end access readable; do not make shelving transparent to reveal hiding occupants. Include selective stock gaps 15 and 16 wherever their shelves are visible. Cash collection and carried bags are shot-level action, not permanent floor clutter. Do not expand localized damage into an overturned or wrecked shop.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 14, 15, 16 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scene establishes one continuous shop interior but does not specify the host building's total storey count or height; treat this as a street-access retail level without implying that the whole building is single-storey. A footprint roughly 6–9 m wide by 8–12 m deep and a ceiling height around 2.7–3.5 m are typical compact urban retail planning ranges, not stated measurements. One entrance door is established by the scene; additional door and window counts are unspecified, and no stair or level change is established. Concealment shelving around 1.5–1.9 m high is a typical planning range rather than a sourced dimension; keep it opaque and provide sufficient rear clearance for crouching people and a bulky robot.", "applied_shots": [ "S41_Shot14", "S41_Shot22", "S41_Shot26" ], "group_id": "bg_unstaffed_shop", "depends_on_fp": [] }, "fp_minister_office": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an entire senior government office. Use single-weight black outlines, simple geometric shapes, and a white background. This is a clean CAD-like layout reference, not artwork. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Depict one rectangular office with three adjoining functional zones and no internal partitions: a pale-yellow shared seating zone occupying the western portion, a pale-blue private desk zone occupying the eastern portion, and a pale-beige threshold and circulation strip along the south. Each zone has one uniform solid pastel fill, without blending or drop shadows. Derive the arrangement from a retained contemporary administrative office convention in a future post-disaster society: formal sofa-based reception seating separate from the executive desk, ordinary furniture, and clear visitor circulation. Do not add futuristic consoles, ruin damage, or traditional decorative motifs. Place an inward-swinging entrance in the south wall near the southeast corner, with its swing clear of furniture. Place two separate window openings in the north wall, one serving each main zone. In the shared zone, position a long sofa along the west wall facing east, a second long sofa toward the center facing west, and a rectangular coffee table between them. Leave access around the southern ends of both sofas and a clear route to the desk zone. In the northeast desk zone, place a broad rectangular desk with its long axis east-west and an executive chair between the desk and north wall, facing south. Draw sofas as rectangles with cushion divisions, the table and desk as plain rectangles, the chair as a simple top-down geometric glyph, the entrance as a leaf line and swing arc, and windows as double parallel lines within wall gaps. Draw exactly one small circle containing each black number from 1 through 11: 1 in an empty part of the shared seating zone; 2 in an empty part of the private desk zone; 3 in the southern circulation strip; 4 beside the entrance; 5 beside the northwest window; 6 beside the northeast window; 7 on the west sofa; 8 on the opposing sofa; 9 on the coffee table; 10 on the desk; 11 on the executive chair. These circles are the only item identifiers. Optional larger area text is limited to Shared Zone, Private Zone, and Threshold Zone. Do not include any other text, dimensions, legends, camera symbols, camera arrows, or field-of-view cones. Do not depict people, telephones in use, loose documents, conversation cues, or other transient objects. Do not append or merge a separate remote caller's office.", "key_elements": [ "Single office envelope with unpartitioned seating, desk, and circulation zones", "Opposed sofas and central coffee table supporting both seated calls and face-to-face negotiations", "Executive desk and chair in the northeast portion", "Southeast entrance with unobstructed circulation along the southern edge", "North-wall windows serving the seating and desk zones", "Conservative schematic arrangement; exact geometry and opening counts are not specified by the scenes", "One persistent office layout across all assigned shots, without transient state markers" ], "numbered_elements": [ { "number": 1, "label": "Shared seating zone", "category": "area", "position_hint": "western portion of the office, above the southern circulation strip", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Private desk zone", "category": "area", "position_hint": "eastern portion of the office, above the southern circulation strip", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entrance circulation zone", "category": "area", "position_hint": "continuous southern strip linking the entrance, seating, and desk", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Office entrance", "category": "opening", "position_hint": "south wall near the southeast corner, swinging inward clear of furniture", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Seating zone window", "category": "opening", "position_hint": "north wall above the shared seating zone", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Desk zone window", "category": "opening", "position_hint": "north wall behind the executive chair", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Primary sofa", "category": "furniture", "position_hint": "along the west wall, facing east toward the coffee table", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Opposing sofa", "category": "furniture", "position_hint": "eastern edge of the shared seating zone, facing west", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Coffee table", "category": "furniture", "position_hint": "between the two opposed sofas in the shared seating zone", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Executive desk", "category": "furniture", "position_hint": "northeast portion of the private zone, long axis east-west", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Executive chair", "category": "furniture", "position_hint": "north of the executive desk, facing south", "base_layer_decision": "base_persistent_furniture" } ], "camera_recommendations": [ { "bg_id": "L196B01", "sub_location": "minister_office", "camera_position": "Near number 4 (office entrance), within number 3 (circulation zone), facing northwest toward numbers 7, 8, and 9, with numbers 10 and 11 retained on the right side of the composition.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Use one consistent establishing geometry for all assigned shots. Keep both sofas and the coffee table legible, with the desk zone visibly connected rather than presented as a separate room. Preserve ordinary daytime background continuity; expressions and telephone actions do not change the room state. Do not append the remote caller's separate office or depict an off-screen caller as physically present.", "use_numbered_elements": [ 1, 2, 3, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The plan covers one office level within a larger administrative building; the building's total storey count and overall height are unspecified. A roughly 7–10 m by 6–8 m footprint and a 2.7–3.6 m ceiling height are conservative typical planning ranges for a spacious contemporary executive office retained into this future setting, not measurements established by the text. The depicted entrance and paired window openings are schematic layout assumptions rather than confirmed facade counts; do not extrapolate them into a whole-building elevation. Keep all three functional zones on the same level, with typical clear circulation of approximately 0.9–1.2 m around the seating and desk.", "applied_shots": [ "S43_Shot2", "S43_Shot4", "S43_Shot9", "S54_Shot2", "S54_Shot5", "S54_Shot6" ], "group_id": "bg_minister_office", "depends_on_fp": [] }, "fp_camper_interior": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact, manually driven camper truck with an open connection between the cab and rear seating compartment. Use a clean CAD-plan appearance: single-weight black outlines, white background, simple geometric symbols, and solid pastel area fills. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Place the vehicle front at the top of the image and its rear at the bottom. Use conventional left-hand-drive geometry appropriate to the stated regional setting and retained older equipment; do not add futuristic consoles or holograms. Make the body a narrow elongated rectangle with a slightly tapered cab front. Fill the cab pale blue, rear seating area pale yellow, and the continuous central circulation strip pale beige, with no blending. Do not add a kitchen, bathroom, sleeping platform, upper deck, or separate enclosed cab. The cab has two forward-facing seats, a front dashboard, a steering wheel on the left, and a central interior rearview mirror positioned to see rear passengers through the unobstructed cab-to-rear connection. Place a forward-facing two-place bench near the rear wall, leaving clear space ahead of it. Provide a front windshield, two cab-side windows integrated into the cab doors, and one schematic rear-compartment side window on each side. Keep the right-side rear window reachable from the rear bench and central circulation space. Include one small rear ceiling lamp as a simple projected fixture footprint without obscuring the floor layout. Draw only these small black-numbered circles, each exactly once: 1 cab area, 2 rear seating area, 3 central circulation strip, 4 driver seat, 5 passenger seat, 6 rear bench, 7 dashboard, 8 steering wheel, 9 interior rearview mirror, 10 windshield, 11 left cab door, 12 right cab door, 13 left cab-side window, 14 right cab-side window, 15 left rear side window, 16 right rear side window, and 17 rear ceiling lamp. Use seat rectangles with simple cushion divisions, a long divided rectangle for the rear bench, a narrow rectangle for the dashboard and mirror, a plain circle for the steering wheel, door lines with swing arcs, and double parallel lines for windows. Separate adjacent numbered circles so all remain legible. Numbers 18 through 23 are external state-overlay references and must not appear anywhere in this image. Do not draw roof holes, leak symbols, water, stains, cloths, bags, people, forest scenery, mirror reflections, sightline arrows, camera icons, field-of-view cones, dimensions, legends, or annotations. Optional larger area text is limited to 'Cab Zone', 'Seating Zone', and 'Circulation Zone'. No other text is allowed. Represent only persistent layout and fixture positions; show no elevations, heights, or storeys.", "key_elements": [ "Unified left-hand-drive cab and rear seating compartment with no opaque partition.", "Central mirror aligned with the unobstructed view toward the forward-facing rear bench.", "Accessible side windows supporting both leak-blocking action and outward searching.", "One persistent small rear ceiling lamp; its illumination state belongs to individual backgrounds.", "Roof and window leakage, improvised cloth plugs, loose luggage, and residual dampness are overlay-only elements.", "Door and window arrangement is a conservative schematic continuity choice where the text does not specify exact construction." ], "numbered_elements": [ { "number": 1, "label": "Cab area", "category": "area", "position_hint": "front third of vehicle, top of plan", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Rear seating area", "category": "area", "position_hint": "rear compartment, bottom portion of plan", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Central circulation strip", "category": "area", "position_hint": "between front seats and continuing into clear space ahead of rear bench", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Driver seat", "category": "furniture", "position_hint": "front-left cab, facing vehicle front", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Passenger seat", "category": "furniture", "position_hint": "front-right cab, facing vehicle front", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Rear bench", "category": "furniture", "position_hint": "across rear compartment near back wall, facing vehicle front", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Dashboard", "category": "prop", "position_hint": "across front of cab beneath windshield", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "Steering wheel", "category": "prop", "position_hint": "left side of dashboard ahead of driver seat", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "Interior rearview mirror", "category": "prop", "position_hint": "upper center of windshield, aligned rearward through open central connection", "base_layer_decision": "base_persistent_fixture" }, { "number": 10, "label": "Windshield", "category": "opening", "position_hint": "front boundary of cab", "base_layer_decision": "base_opening" }, { "number": 11, "label": "Driver door", "category": "opening", "position_hint": "left cab boundary beside driver seat", "base_layer_decision": "base_opening" }, { "number": 12, "label": "Passenger door", "category": "opening", "position_hint": "right cab boundary beside passenger seat", "base_layer_decision": "base_opening" }, { "number": 13, "label": "Driver side window", "category": "opening", "position_hint": "within left cab door", "base_layer_decision": "base_opening" }, { "number": 14, "label": "Passenger side window", "category": "opening", "position_hint": "within right cab door", "base_layer_decision": "base_opening" }, { "number": 15, "label": "Left rear side window", "category": "opening", "position_hint": "left rear-compartment wall ahead of rear bench", "base_layer_decision": "base_opening" }, { "number": 16, "label": "Right rear side window", "category": "opening", "position_hint": "right rear-compartment wall ahead of rear bench", "base_layer_decision": "base_opening" }, { "number": 17, "label": "Small rear ceiling lamp", "category": "prop", "position_hint": "ceiling over rear seating area, just ahead of bench; projected footprint only", "base_layer_decision": "base_persistent_fixture" }, { "number": 18, "label": "Active roof leakage", "category": "prop", "position_hint": "over clear rear-compartment space between front passenger seat and rear bench; overlay only", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 19, "label": "Active window leakage", "category": "prop", "position_hint": "frame and sill of right rear side window number 16; overlay only", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 20, "label": "Clothing pressed to ceiling", "category": "prop", "position_hint": "held against ceiling at roof leakage number 18; overlay only", "base_layer_decision": "state_overlay_transient_object" }, { "number": 21, "label": "Wet window cloth", "category": "prop", "position_hint": "pressed into frame of right rear side window number 16; overlay only", "base_layer_decision": "state_overlay_transient_object" }, { "number": 22, "label": "Opened clothing bag", "category": "prop", "position_hint": "rear compartment beside bench, outside central passage; overlay only", "base_layer_decision": "state_overlay_transient_object" }, { "number": 23, "label": "Residual interior dampness", "category": "prop", "position_hint": "subtle wet patches below leaking window and roof area, without active falling water; overlay only", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L199B05", "sub_location": "cab_mirror_axis", "camera_position": "Just behind and inboard of number 5, looking forward toward number 9 above number 7; adjust laterally so number 6 is visible in the mirror through number 3.", "camera_height": "Approximately 1.25-1.4 m above cabin floor, seated eye level", "lens_hint": "35mm equivalent, moderately wide", "framing_notes": "Keep number 9 readable and preserve the genuine reflected relationship to number 6 rather than inventing a separate rear space. Number 17 is the sole switched-on interior lamp; its dim effect may be visible without the fixture itself entering the direct frame. No active leakage or improvised repairs in this moment.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 ], "ignore_numbered_elements": [ 18, 19, 20, 21, 22, 23 ] }, { "bg_id": "L199B03", "sub_location": "rear_leak_response", "camera_position": "At the left edge of number 3 immediately behind number 4, facing diagonally rearward and right toward numbers 16 and 6, with the ceiling above number 18 in frame.", "camera_height": "Approximately 1.35-1.5 m above cabin floor", "lens_hint": "28mm equivalent, wide without fisheye distortion", "framing_notes": "Include number 17 overhead, number 16 and its wet cloth prominently, and enough clear floor to establish access from the cab. Depict numbers 18 and 19 as active water entry, number 20 pressed overhead, number 21 pressed to the window frame, and number 22 beside the bench. Retain dim illumination from the one rear lamp; do not add another light source or permanent roof aperture.", "use_numbered_elements": [ 2, 3, 5, 6, 16, 17, 18, 19, 20, 21, 22 ], "ignore_numbered_elements": [ 23 ] }, { "bg_id": "L199B02", "sub_location": "cab_side_window_search", "camera_position": "Behind number 4 at the forward end of number 3, facing diagonally forward and right across number 5 toward number 14, with number 10 available at the front edge.", "camera_height": "Approximately 1.3-1.45 m above cabin floor, close to seated eye level", "lens_hint": "32mm equivalent, moderately wide", "framing_notes": "Give number 14 sufficient clear area for an outward pointing gesture and a view of forest beyond the vehicle. Preserve the same cab and rear connection, with subtle residual dampness where it enters the frame. Use post-shower daylight, no active rain entry, and no ongoing cloth-blocking action. Forest scenery belongs to this background, not the persistent floor plan.", "use_numbered_elements": [ 1, 3, 4, 5, 7, 8, 9, 10, 12, 14, 23 ], "ignore_numbered_elements": [ 18, 19, 20, 21, 22 ] } ], "scale_guideline": "Treat this as a single occupied vehicle level, typical of a compact truck camper; the text does not specify an upper deck, exact body dimensions, or overall height. A usable interior roughly 4-6 m long and 2-2.4 m wide, with roughly 1.8-2.1 m rear-compartment headroom and 2.5-3.3 m overall vehicle height, is a conservative typical range rather than a measured specification. The text establishes two front seating positions, rear seating for two occupants, and one small rear lamp; exact window and door counts are unspecified, so the drawn openings are schematic continuity choices. Mount the mirror high at the windshield and the lamp at the rear ceiling, preserve an unobstructed rearward mirror view, and do not infer stairs, a raised living deck, or permanent roof holes from temporary leakage.", "applied_shots": [ "S45_Shot4", "S45_Shot9", "S55_Shot3" ], "group_id": "bg_camper_vehicle", "depends_on_fp": [] }, "fp_abandoned_library_main": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an abandoned municipal-library reading room. Use single-weight black outlines, simple geometric symbols, and a white background. This is a clean CAD-like spatial reference, not artwork. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use inherited modern institutional geometry: one rectangular reading room, conventional freestanding bookcases, an old desktop-computer station, and an unobstructed wall-length circulation aisle. Do not add futuristic interfaces or decorative architectural features. Orient north upward. Place the entrance in the south wall near the center. Reserve the southwest corner as an open floor area used for meals and sleeping, without a permanent bed or dining table. Place two parallel north-south bookcase banks in the central and central-west portions of the room, stopping before the southern circulation space. Add a third bookcase along the western portion of the north wall. Place the computer desk against the northwest section of the west wall, below the north-wall bookcase and west of the central-west bookcase; keep an accessible aisle between the desk and bookcase. Show an old desktop computer as a simple footprint symbol on its desk, with no screen content or glow. Place a conventional window in the middle section of the west wall. Keep the entire east wall uninterrupted and free of furniture, with a clear north-south aisle in front of it and a direct walking route from the southwest corner through the southern circulation space. This east wall is the future mural support, but leave it completely blank in this base diagram. Apply separate flat solid pastel fills to contiguous functional areas: main reading and shelf area pale yellow, entrance threshold pale beige, southwest refuge corner pale blue, northwest computer-station area pale cyan, and east-side circulation aisle pale gray. These are open functional zones, not enclosed rooms; do not invent internal partition walls. Draw bookcases as narrow rectangles with simple shelf divisions, the desk as a rectangle, the entrance as a door leaf with swing arc, and the window as double parallel lines in the wall. Draw exactly one small circle containing each black number from 1 through 13: 1 main reading area, 2 entrance threshold, 3 southwest refuge corner, 4 northwest computer-station area, 5 east-side circulation aisle, 6 uninterrupted east wall, 7 central-west bookcase, 8 central bookcase, 9 north-wall bookcase, 10 computer desk, 11 old desktop computer, 12 south entrance door, 13 west window. Position the wall marker just beside the wall line without creating an opening. Never draw numbers 14 through 17 or their associated temporary content. Do not draw the mural, active-screen effects, meal supplies, bedding, people, robots, loose crayons, thrown books, dust textures, cobweb textures, or new destruction. Inside the diagram use only the numbered circles, optional short generic zone names, and an optional small N arrow. No legend, dimension text, camera symbols, field-of-view cones, or other annotations.", "key_elements": [ "One continuous institutional reading room with open functional zones rather than invented partitioned rooms.", "Stable bookcase positions and an accessible old computer station screened by shelving.", "Southwest floor corner serves both meals and temporary sleeping; no permanent bedroom furniture.", "Uninterrupted east wall and adjacent walking aisle support the later physical mural reveal.", "Long-standing dust, cobwebs, aged books, and disordered shelf contents remain background continuity details, not newly inflicted destruction or diagram textures.", "Completed mural, active monitor state, meal supplies, and improvised bedding belong exclusively to per-background overlays.", "Window placement and detailed furniture arrangement are conservative staging assumptions where the source does not specify geometry." ], "numbered_elements": [ { "number": 1, "label": "Main reading area", "category": "area", "position_hint": "central shared floor surrounding the bookcase banks", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entrance threshold", "category": "area", "position_hint": "south-center interior, immediately inside the entrance", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Meal and sleeping corner", "category": "area", "position_hint": "southwest open floor corner, south of the bookcases", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Computer station area", "category": "area", "position_hint": "northwest pocket between west wall and central-west bookcase", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Wall-side circulation aisle", "category": "area", "position_hint": "continuous north-south strip along the east wall", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Mural support wall", "category": "area", "position_hint": "uninterrupted east perimeter wall beside the circulation aisle", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Central-west bookcase", "category": "furniture", "position_hint": "north-south bank east of the computer station, ending above the refuge corner", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Central bookcase", "category": "furniture", "position_hint": "north-south bank east of number 7 and west of the wall-side aisle", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "North-wall bookcase", "category": "furniture", "position_hint": "western section of the north wall, above the computer station", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Computer desk", "category": "furniture", "position_hint": "against the northwest section of the west wall, below number 9", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Old desktop computer", "category": "prop", "position_hint": "on number 10, with monitor facing into the station aisle", "base_layer_decision": "base_persistent_fixture" }, { "number": 12, "label": "Reading-room entrance", "category": "opening", "position_hint": "south wall near center, opening into number 2", "base_layer_decision": "base_opening" }, { "number": 13, "label": "West-wall window", "category": "opening", "position_hint": "middle section of the west wall, south of the computer desk", "base_layer_decision": "base_opening" }, { "number": 14, "label": "Completed crayon mural", "category": "prop", "position_hint": "physical surface of number 6; blue sea, marine life, palms, camping truck, travelers, relatives, and a cleric remain inside the wall drawing", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 15, "label": "Active computer display", "category": "prop", "position_hint": "screen of number 11; localized nighttime face illumination only", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 16, "label": "Improvised box-and-book bedding", "category": "prop", "position_hint": "floor of number 3 during the sleeping period and following morning", "base_layer_decision": "state_overlay_transient_object" }, { "number": 17, "label": "Temporary meal supplies", "category": "prop", "position_hint": "floor of number 3 during the meal, including opened canned food and a travel bag", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L202B04", "sub_location": "reading_room_meal_corner", "camera_position": "near number 2 (entrance threshold), looking diagonally northwest toward number 3 (meal and sleeping corner), with number 7 (central-west bookcase) behind the gathering area", "camera_height": "low seated eye level, approximately 0.9-1.1 m", "lens_hint": "35mm moderate wide angle", "framing_notes": "Prioritize the floor-level meal space and nearby old shelves. Retain accumulated dust, cobwebs, and disordered books without implying fresh room-wide destruction from the book-throwing action. Do not show the morning mural or the later active-monitor state.", "use_numbered_elements": [ 1, 2, 3, 7, 13, 17 ], "ignore_numbered_elements": [ 14, 15, 16 ] }, { "bg_id": "L202B05", "sub_location": "reading_room_computer_station", "camera_position": "inside number 4 (computer station area), just west of the northern end of number 7 (central-west bookcase), facing northwest toward number 10 (computer desk) and number 11 (old desktop computer)", "camera_height": "near seated face level, approximately 1.2 m", "lens_hint": "50mm normal lens", "framing_notes": "Frame the old monitor close enough to motivate localized face illumination. Use dusty shelf edges and old books as near framing anchors, with number 9 behind the station. The sleeping corner is outside this tight frame; never reveal the completed morning mural.", "use_numbered_elements": [ 4, 7, 9, 10, 11, 15 ], "ignore_numbered_elements": [ 14, 16, 17 ] }, { "bg_id": "L202B01", "sub_location": "reading_room_mural_wall", "camera_position": "at the southwest edge of number 5 (wall-side circulation aisle), facing northeast along number 6 (mural support wall), with the south edge of number 3 (meal and sleeping corner) available in the near foreground", "camera_height": "child standing eye level, approximately 1.2-1.4 m", "lens_hint": "28-35mm wide angle", "framing_notes": "Make the long physical wall and its newly completed crayon mural dominant, retaining a little shelf edge and improvised bedding to establish the real library interior. Keep all sea imagery, marine life, palms, truck, and depicted people confined to the wall surface; do not turn the room into a fantasy landscape. Preserve the aged interior around the vivid mural.", "use_numbered_elements": [ 1, 3, 5, 6, 8, 14, 16 ], "ignore_numbered_elements": [ 15, 17 ] } ], "scale_guideline": "Only one reading-room level is mapped; the building's total storey count and overall height are unspecified, and this room plan must not imply a single-storey building. A room footprint roughly 8-12 m across by 10-16 m long and a ceiling around 3-4 m high are typical conservative ranges for an inherited municipal-library reading room, not source measurements. Bookcases may typically stand around 1.8-2.2 m high, while the mural occupies a substantial portion of the uninterrupted interior wall rather than a freestanding scenic backdrop. The text establishes an entrance but no facade-wide opening count; the window location is a provisional layout convention, and no stairs, additional floors, or level changes are established within this scope.", "applied_shots": [ "S46_Shot17", "S46_Shot28", "S47_Shot3" ], "group_id": "bg_abandoned_library", "depends_on_fp": [] }, "fp_l205_service_station": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan of a roadside fuel station, its small shop, adjoining road, and roadside trash mound. Use single-weight black outlines, simple geometric shapes, and a white background. This must resemble a clean architectural CAD plan, not artwork. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only solid flat pastel area fills with no blending or drop shadows. Arrange the rectangular shop in the upper-left portion, an open forecourt immediately south of it, an east-west road across the lower portion, and a trash mound beyond the forecourt on the upper shoulder of the road toward the right. Keep generous margins. Road length and mound separation are schematic, not a claim about travel distance. Reflect a compact, retained roadside retail layout in a disaster-affected late twenty-first-century setting: conventional fuel equipment, simple retail shelving, a small attendant table, and direct pedestrian access from pumps to shop; no speculative futuristic architecture. Fill the main shop pale yellow, the medicine corner pale blue, the entrance apron pale beige, the forecourt pale cyan, the pump island pale mint, the driveway pale peach, the road pale gray, the roadside shoulder pale lavender, and the mound footprint pale muted pink. Each area has one uniform solid fill. Show the shop as an open-roof plan with intact perimeter walls and undamaged shelving. Put marker 1 in open shop floor space. Place the medicine corner, marker 2, at the northeast interior, with a narrow medicine shelving rectangle, marker 3, against the east wall. Add two separate north-south rectangular retail racks: marker 4 near the center and marker 5 farther east, leaving a clear confrontation aisle between them and access to the medicine corner around their north ends. Put a rectangular attendant table, marker 6, near the northwest wall, and a small fixed television rectangle, marker 7, against the north wall beside it. Place a small quarter-circle security-mirror symbol, marker 8, in the northeast wall corner, oriented into the shop toward the entrance approach. Put a south-wall entrance, marker 9, slightly west of center, using a door leaf and swing arc; place a broad storefront window, marker 10, east of the entrance, using double parallel lines within the wall. Keep the entrance-to-interior route unobstructed. Mark the small entrance apron 11 and the open forecourt 12. Draw a narrow rectangular fuel island, marker 13, in the western half of the forecourt, with a smaller rectangular dispenser, marker 14, centered on it. Leave vehicle circulation on both sides. Place a broad unobstructed driveway opening, marker 15, at the southeast edge of the forecourt connecting to the road, marker 16. Draw the roadside shoulder, marker 17, extending eastward from the driveway along the road's upper edge. Place a simple closed polygon for the persistent trash mound footprint, marker 18, on that shoulder to the east, without individual loose rubbish symbols or contour shading. Draw each marker from 1 through 18 exactly once as a small white circle containing a black integer, placed inside or immediately beside its corresponding shape without obscuring it. No other text is necessary. Do not draw a legend, dimensions, camera icons, view cones, direction arrows, people, weapons, vehicles, drones, crashes, smoke, broken glass, fallen merchandise, bullet damage, or ceiling damage. Do not depict temporary action or plot-state changes.", "key_elements": [ "Compact shop behind an open fueling forecourt, with direct access from the road.", "Medicine corner and two intact retail racks defining a clear confrontation aisle.", "Persistent attendant table, television, and corner security mirror.", "Storefront entrance and window facing the forecourt.", "Fuel dispenser on a small island with vehicle circulation space.", "Roadside shoulder and persistent trash mound footprint beyond the station exit.", "Clean base layout only; vehicles, crash effects, weapons, and people remain shot-specific foreground elements." ], "numbered_elements": [ { "number": 1, "label": "Shop interior", "category": "area", "position_hint": "northwest portion of the site, behind the forecourt", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Medicine corner", "category": "area", "position_hint": "northeast corner inside the shop", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Medicine shelving", "category": "furniture", "position_hint": "east wall within the medicine corner", "base_layer_decision": "base_persistent_furniture" }, { "number": 4, "label": "Central retail rack", "category": "furniture", "position_hint": "middle of the shop, aligned north-south", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Eastern retail rack", "category": "furniture", "position_hint": "east of the central rack, south of the medicine corner", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Attendant table", "category": "furniture", "position_hint": "northwest interior near the north wall", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Fixed television", "category": "prop", "position_hint": "north wall beside the attendant table", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "Corner security mirror", "category": "prop", "position_hint": "northeast interior wall corner, facing the shop and entrance approach", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "Shop entrance", "category": "opening", "position_hint": "south shop wall, slightly west of center", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Storefront window", "category": "opening", "position_hint": "south shop wall, east of the entrance", "base_layer_decision": "base_opening" }, { "number": 11, "label": "Entrance apron", "category": "area", "position_hint": "immediately outside the south-facing shop entrance", "base_layer_decision": "base_structural_unit" }, { "number": 12, "label": "Fueling forecourt", "category": "area", "position_hint": "between the shop and adjoining road", "base_layer_decision": "base_structural_unit" }, { "number": 13, "label": "Fuel island", "category": "area", "position_hint": "western half of the forecourt", "base_layer_decision": "base_structural_unit" }, { "number": 14, "label": "Fuel dispenser", "category": "prop", "position_hint": "center of the fuel island", "base_layer_decision": "base_persistent_fixture" }, { "number": 15, "label": "Road access opening", "category": "opening", "position_hint": "southeast edge of the forecourt, connecting to the road", "base_layer_decision": "base_opening" }, { "number": 16, "label": "Adjoining road", "category": "area", "position_hint": "east-west strip across the southern portion of the plan", "base_layer_decision": "base_structural_unit" }, { "number": 17, "label": "Roadside shoulder", "category": "area", "position_hint": "north edge of the road, extending east from the station exit", "base_layer_decision": "base_structural_unit" }, { "number": 18, "label": "Trash mound footprint", "category": "area", "position_hint": "on the roadside shoulder east of the forecourt", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L205B01", "sub_location": "shop_confrontation_aisle", "camera_position": "Inside number 1 just north of number 9, looking north-northeast between numbers 4 and 5 toward numbers 2, 3, and 8.", "camera_height": "eye-level standing, approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Keep numbers 4 and 5 as lateral framing anchors and numbers 2 and 3 clearly readable beyond the aisle. Numbers 6 and 7 may remain at the far left of the wide composition. Preserve an unobstructed entrance approach behind the camera. This is the pre-discharge state: ceiling and racks are intact, with no fallen merchandise or bullet damage. Armed figures and handheld objects are foreground shot elements, not background fixtures.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8 ], "ignore_numbered_elements": [] }, { "bg_id": "L205B02", "sub_location": "roadside_trash_mound", "camera_position": "On the southern edge of number 16, southeast of number 18, facing west-northwest across numbers 17 and 18 toward number 15 and the station exterior.", "camera_height": "low standing viewpoint, approximately 1.3 m", "lens_hint": "35mm moderate wide angle", "framing_notes": "Use the same roadside composition for both assigned shots. Feature numbers 17 and 18 prominently, with open foreground road space for shot-specific action. Keep numbers 9 through 15 as secondary station context where visible; do not expose the shop interior through opaque walls. The station-to-mound distance is schematic and should not imply an exact pursuit length. Do not bake overturned or colliding vehicles, smoke, broken glass, or rescuers into this background.", "use_numbered_elements": [ 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The shop's storey count is unspecified; use a single-storey roadside retail unit with a typical height of roughly 3–4 m, rather than implying additional floors. A footprint roughly 8–12 m wide by 6–10 m deep is a conservative typical layout assumption, not a textual measurement; keep circulation broad enough for adults and a bulky robot to pass between the racks. The depicted entrance and storefront window are layout assumptions rather than documented facade counts, and no upper-storey openings or stairs are established. Keep the road and forecourt approximately at grade; the trash mound is a raised accumulation, but its height and its distance from the station are unspecified.", "applied_shots": [ "S49_Shot14", "S49_Shot47", "S49_Shot51" ], "group_id": "bg_roadside_service_station", "depends_on_fp": [] }, "fp_repair_warehouse": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic floor plan of an adapted roadside motor-repair warehouse with an informal recovery corner. Use single-weight black outlines, simple geometric symbols, and a white background. This is a clean CAD-like layout reference, not artwork. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show one rectangular, undivided workshop enclosure, with north at the top. Its utilitarian layout combines an oversized vehicle-access opening, a separate pedestrian door, perimeter tools and audio equipment, and an improvised resting corner; retain ordinary repair-shop equipment rather than adding speculative technology. Fill each nonoverlapping functional sub-area with one solid pastel color: southwest recovery area pale blue, eastern vehicle-repair bay pale cyan, central circulation area pale yellow, narrow northern tool-storage strip pale gray, and northwest pedestrian threshold pale beige. These are open functional zones, not enclosed rooms; do not add partition walls between the recovery corner and repair bay. Keep a clear diagonal sightline from the recovery cot across the central aisle to the repair bay and distant speaker. Place a simple rectangular cot with a pillow against the west wall in the southwest corner. Place a pedestrian door with a conventional leaf-and-swing-arc symbol in the west wall near its north end. Place a broad vehicle-access opening in the south wall aligned with the eastern repair bay, using a simple overhead-door plan symbol. Place a rectangular workbench along the north wall, slightly east of center, and a large speaker represented by a plain square footprint at the northeast corner, clear of the repair bay. Represent two persistent wall-poster arrays as narrow blank wall-attached strips: one on the west wall above the cot and below the pedestrian door, the other along the north wall west of the workbench. Do not illustrate poster content or lettering. Add small circles with black numbers exactly once at these persistent locations: 1 warehouse enclosure at its upper perimeter; 2 southwest recovery area; 3 eastern repair bay; 4 central circulation area; 5 northern tool-storage strip; 6 northwest threshold; 7 recovery cot; 8 pedestrian door; 9 southern vehicle-access opening; 10 northern workbench; 11 northeast speaker; 12 west-wall poster array; 13 north-wall poster array. Keep every circle distinct and avoid overlapping fixture outlines. Leave the vehicle bay otherwise empty in this base diagram: the camper under repair and loose floor pliers belong exclusively to a separate background overlay. Do not draw numbers 14 or 15, a vehicle, loose tools, bottles, people, injury cues, damage cues, movement trails, or other event-state objects. The only permitted text is the numbered circles, optional short generic zone labels, and a small north arrow with N. No legend, dimensions, camera icons, viewing cones, or camera annotations.", "key_elements": [ "Open warehouse interior with an unobstructed recovery-to-repair sightline", "Southwest recovery cot separated from vehicle work by a central aisle", "Eastern camper repair bay aligned with the southern vehicle opening", "Northwest pedestrian entrance with clear circulation into the workshop", "Northern tool workbench and distant northeast speaker", "Persistent west-wall and north-wall poster arrays", "Camper and nearby floor pliers reserved for the background overlay" ], "numbered_elements": [ { "number": 1, "label": "Warehouse enclosure", "category": "area", "position_hint": "entire rectangular workshop shell; marker at the upper perimeter", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Recovery area", "category": "area", "position_hint": "southwest corner, open to the central aisle and eastern repair bay", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Vehicle repair bay", "category": "area", "position_hint": "eastern half of the warehouse, aligned north-south", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Central aisle", "category": "area", "position_hint": "between the western recovery area and eastern repair bay", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Tool-storage strip", "category": "area", "position_hint": "narrow strip along the north wall, east of the pedestrian threshold", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Pedestrian threshold", "category": "area", "position_hint": "northwest corner immediately inside the pedestrian door", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Recovery cot", "category": "furniture", "position_hint": "against the west wall in the southwest recovery area, long axis north-south", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Pedestrian door", "category": "opening", "position_hint": "west wall near the northwest corner, opening into the threshold", "base_layer_decision": "base_opening" }, { "number": 9, "label": "Vehicle-access opening", "category": "opening", "position_hint": "south wall, aligned with the eastern repair bay", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Tool workbench", "category": "furniture", "position_hint": "against the north wall, slightly east of center", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Large speaker", "category": "furniture", "position_hint": "northeast corner beside the repair bay, distant from the recovery cot", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "West-wall poster array", "category": "prop", "position_hint": "west wall between the recovery cot and pedestrian entrance", "base_layer_decision": "base_persistent_fixture" }, { "number": 13, "label": "North-wall poster array", "category": "prop", "position_hint": "north wall west of the tool workbench", "base_layer_decision": "base_persistent_fixture" }, { "number": 14, "label": "Camper under repair", "category": "prop", "position_hint": "inside the eastern repair bay, long axis north-south and front toward the north; leave working clearance around it", "base_layer_decision": "state_overlay_transient_object" }, { "number": 15, "label": "Large floor pliers", "category": "prop", "position_hint": "on the floor immediately east of the recovery cot, within reach from its aisle-facing edge", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L209B01", "sub_location": "repair_warehouse", "camera_position": "Near the south end of number 7 (recovery cot), facing north-northeast across number 4 (central aisle) toward number 14 (camper under repair) in number 3 (repair bay) and number 11 (large speaker).", "camera_height": "Low seated or reclining eye level, approximately 1.0-1.2 m; suggested staging height rather than a specified measurement.", "lens_hint": "24-28mm wide angle", "framing_notes": "Use the same recovery-side establishing view for all listed shots. Keep the cot edge and number 15 in the lower foreground, the camper on the right, the large speaker in the far right background, and the poster arrays along the left and rear walls. Include number 8 toward the left background so an entrance remains spatially legible. The southern vehicle opening is behind the camera. Preserve the pliers' overlay position without drawing them into the base plan; camper damage and repair activity are background-state details.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 14, 15 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Storey count and dimensions are not specified; use a single tall workshop volume with roughly 4-6 m clear height as a typical conservative assumption for an adapted roadside camper-repair shed, not a confirmed building measurement. A footprint roughly 8-12 m wide by 10-16 m long is a typical planning range accommodating a camper, working clearances, perimeter equipment, and an open recovery corner. A pedestrian door is explicit in the scene; the separate broad vehicle opening is a functional layout inference, while window counts are unspecified and no windows, upper floors, stairs, or mezzanines are established. Keep the speaker floor-standing and the poster arrays attached to walls above the furniture; the neighboring container dining space is outside this plan's scope.", "applied_shots": [ "S50_Shot4", "S50_Shot9", "S50_Shot10" ], "group_id": "bg_auto_repair_complex", "depends_on_fp": [] }, "fp_container_diner": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a modest converted-container communal diner beside an off-plan vehicle repair workshop. Use a clean architectural CAD-plan appearance: single-weight black outlines, white background, simple geometric symbols and solid pastel zone fills only. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces and material rendering. Reflect an improvised future disaster-era Korean roadside dining layout through compact shared-table seating and practical circulation, not decorative styling or futuristic equipment. Do not draw the adjacent workshop, sleeping rooms or vehicles.\n\nOrient the long rectangular container horizontally, west at left and north at top, approximately two and a half times as long as it is wide. Keep one continuous interior without partition walls. Place an entrance in the southern half of the west end wall, with a door leaf and outward swing arc. Immediately inside it, provide a small pale-beige threshold zone. A pale-gray circulation strip runs along the south side and connects the entrance to the far end. Fill the shared eating area across the north and central portion pale yellow. Fill a compact service strip at the east end pale cyan. Use one uniform solid fill per zone, without blending. Preserve clear passage between the entrance, eating area and service strip.\n\nWithin the shared eating area, place one long rectangular communal dining table oriented east-west, with one narrow rectangular bench along its north side and another along its south side. Keep the south-side circulation strip clear of the bench. Leave the western table end accessible from the entrance and leave open clearance at the eastern table end for a bulky diner without adding a special station. Place one horizontal window in the north wall above the table, represented by double parallel lines within the wall. Place a shallow rectangular serving counter against the east end wall. Furniture must use simple top-down rectangles, with no three-dimensional details. Keep all furniture aligned and the interior intact and orderly.\n\nDraw exactly one small white circle containing a black integer for each of the following base elements: 1 container enclosure, positioned beside the northwest interior perimeter; 2 shared eating area, in its open western portion; 3 entrance threshold; 4 south circulation strip; 5 east service strip; 6 west entrance door; 7 north-wall window; 8 communal table; 9 north bench; 10 south bench; 11 east serving counter. Each number appears exactly once. Markers must not obscure door swings or furniture outlines. Optional larger area text is limited to Shared Zone, Threshold Zone, Circulation Zone and Service Zone. No other labels, dimensions, legends or annotations. Do not draw markers 12 or 13, meal dishes, letters, people, robots, damage, debris, evidence displays, camera symbols, viewing cones or camera arrows. These transient subjects and camera instructions are not part of this base diagram.", "key_elements": [ "Single narrow converted-container dining room with no internal partitions", "West-end entrance connected to an unobstructed south-side circulation strip", "One shared dining table with two persistent bench seats", "North-wall window aligned with the dining table", "Compact east-end serving counter", "Same intact furniture arrangement for both daytime dining and the following morning", "Meal dishes and the handheld letter belong only to separate scene overlays" ], "numbered_elements": [ { "number": 1, "label": "Container enclosure", "category": "area", "position_hint": "Entire rectangular footprint; marker beside northwest interior perimeter", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Shared eating area", "category": "area", "position_hint": "North and central interior, between west threshold and east service strip", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entrance threshold", "category": "area", "position_hint": "Southwest interior, immediately inside west entrance", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Circulation strip", "category": "area", "position_hint": "Along south wall, connecting threshold with east service strip", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Service strip", "category": "area", "position_hint": "East end of the container, beyond communal table", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Entrance door", "category": "opening", "position_hint": "Southern half of west end wall, swinging outward", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Dining window", "category": "opening", "position_hint": "North long wall, aligned with communal table", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Communal dining table", "category": "furniture", "position_hint": "North-central shared area, long axis east-west", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "North dining bench", "category": "furniture", "position_hint": "Between communal table and north wall", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "South dining bench", "category": "furniture", "position_hint": "Along south side of communal table, north of clear circulation strip", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Serving counter", "category": "furniture", "position_hint": "Against east end wall within service strip", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Active soup meal dishes", "category": "prop", "position_hint": "On communal table number 8 at the occupied dining places; daytime meal overlay only", "base_layer_decision": "state_overlay_transient_object" }, { "number": 13, "label": "Worn handheld letter", "category": "prop", "position_hint": "Held in the foreground near shared eating area number 2; following-morning overlay only, not a fixed tabletop display", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L211B01", "sub_location": "container_diner_shared_table", "camera_position": "Just inside number 3 (entrance threshold), near number 6 (entrance door), facing east-northeast toward number 8 (communal table), with number 11 (serving counter) at the far end.", "camera_height": "Standing eye level, approximately 1.5-1.6 m", "lens_hint": "28-35mm equivalent, moderately wide without exaggerated distortion", "framing_notes": "Show numbers 8, 9 and 10 as the stable dining arrangement, number 7 on the far wall and number 4 as clear passage. Overlay number 12 on the table. Keep the room intact and orderly despite the tense conversation; do not add broken furniture, overturned dishes or damage.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12 ], "ignore_numbered_elements": [ 13 ] }, { "bg_id": "L211B03", "sub_location": "container_diner_letter_foreground", "camera_position": "Within number 4 (south circulation strip), beside the western end of number 10 (south bench), facing north-northeast across number 8 (communal table).", "camera_height": "Approximately 1.3-1.5 m, adjusted to the handheld letter foreground", "lens_hint": "65-85mm equivalent for a tight foreground composition", "framing_notes": "Overlay number 13 as a handheld foreground object. Show only limited portions of numbers 8 and 9 and the existing north wall behind it. Retain the same furniture positions; omit the previous active meal setup and do not create an evidence display, new room or special letter station.", "use_numbered_elements": [ 1, 2, 8, 9, 13 ], "ignore_numbered_elements": [ 12 ] } ], "scale_guideline": "Treat the diner as a single-level converted container, typical for the explicitly described temporary roadside dining structure; neither stacking nor additional storeys is established. A footprint roughly 6-7 m long by 2.4-3 m wide and an overall height around 2.6-3 m are conservative typical planning ranges, not measurements supplied by the scene. The entrance is text-supported, but its position, the single proposed window and the furniture arrangement are schematic layout assumptions rather than verified opening counts or dimensions. No stairs, raised dining platform or rooftop structures are established; preserve usable aisle and table-end clearance for a bulky adult-scale robot without enlarging the space into a hall.", "applied_shots": [ "S51_Shot10", "S51_Shot14" ], "group_id": "bg_auto_repair_complex", "depends_on_fp": [] }, "fp_church_sanctuary": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a ruined church sanctuary adapted for assemblies in a future post-disaster settlement. This is a spatial reference diagram, not artwork. Use single-weight black outlines, simple geometric symbols, and flat pastel solid fills on an off-white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Do not illustrate light beams or stained-glass artwork.\n\nUse a long rectangular nave with north at the top, a main entrance at the south end, and a broad dais at the north end. Preserve a modern congregational-hall arrangement rather than inventing an elaborate historical cathedral. Leave the nave largely unfurnished, with generous assembly space and a clear central approach to the dais. The architectural shell has a few angular missing perimeter sections, kept distinct from intentional openings; show no loose rubble. Place a large ceremonial chair at the rear center of the dais, facing south. Center a short, broad flight of steps on the dais's south edge.\n\nRepresent the upper balcony by its horizontal footprint along the west, south, and east edges of the nave, forming one continuous U around an open center. Use dashed black inner footprint boundaries to distinguish this overhead structure from ground-floor walls; do not introduce perspective or an elevation. Its inner railing follows that U. Keep the balcony side strips narrow enough to preserve an unobstructed central nave. Put a compact access stair within the southwest edge strip, using simple parallel tread lines without arrows. Place one schematic stained-glass window opening on each long exterior side wall, using double parallel lines only. These are proposed reference opening positions, not an inventory of every window in the building.\n\nAttach a small service holding bay outside the northeast side wall, immediately beside the dais. A wide barred sliding doorway in the east wall connects this bay to the front-right nave. Show the doorway's permanent jambs, track, and a neutral schematic barred leaf aligned beside the opening, without depicting an event-specific open or closed state. Reserve an unobstructed rectangular cage-movement clearance extending west from this doorway into the front-right nave, beside rather than across the dais steps. The doorway and clearance must accommodate a bulky occupied cage with room around it. Do not draw the mobile cage itself: it belongs to a separate scene overlay. Do not connect this bay to an arena, prison, underground lift, or exterior tower.\n\nApply one consistent flat pastel solid fill per distinct area: nave pale yellow; dais pale lavender; upper balcony footprint pale blue; service holding bay pale cyan; entrance threshold pale beige; cage-movement clearance pale gray. The clearance is a reserved floor area, not an enclosed room. Keep all fills free of blending, shading, and patterns.\n\nPlace small circles containing black numbers exactly once each: 1 in the central nave; 2 at the south entrance; 3 on the dais; 4 beside the dais steps; 5 on the ceremonial chair; 6 inside the south balcony strip; 7 beside the balcony's inner railing; 8 at the west window; 9 at the east window; 10 at the barred doorway; 11 inside the service holding bay; 12 inside the cage-movement clearance; 13 beside the southwest balcony access stair; 14 beside an intact portion of the ruined perimeter shell. Use a rectangle with a backrest line for the chair, a door swing arc for the main entrance, parallel tread lines for stairs, and double parallel wall lines for windows. Do not draw marker 15 or any transient object. Draw no people, weapons, crowd symbols, movement trails, event marks, camera icons, field-of-view cones, or camera arrows. No text except the numbered circles and an optional small N with north arrow; no legend, dimensions, titles, or furniture labels.", "key_elements": [ "Long, open congregational nave with a clear south-to-north approach", "North dais, central access steps, and persistent ceremonial chair", "Second-level U-shaped balcony overlooking the nave", "Opposing side-wall stained-glass opening positions", "East-side barred sliding doorway beside the dais", "Separate service holding bay and unobstructed cage-movement clearance", "Persistent ruined architectural shell without transient debris", "Mobile cage excluded from the base diagram and assigned to an overlay" ], "numbered_elements": [ { "number": 1, "label": "Open nave", "category": "area", "position_hint": "central ground-floor hall between south entrance and north dais", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Main entrance", "category": "opening", "position_hint": "center of south wall beneath rear balcony", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Dais", "category": "area", "position_hint": "north end of nave", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Dais steps", "category": "area", "position_hint": "center of dais south edge", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Ceremonial chair", "category": "furniture", "position_hint": "rear center of dais, facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Upper balcony", "category": "area", "position_hint": "continuous upper-level U along west, south, and east nave edges", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Balcony railing", "category": "prop", "position_hint": "inner edge of upper balcony overlooking the central nave", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "West stained-glass opening", "category": "opening", "position_hint": "west exterior wall, forward half of nave", "base_layer_decision": "base_opening" }, { "number": 9, "label": "East stained-glass opening", "category": "opening", "position_hint": "east exterior wall, south of barred doorway", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Barred sliding doorway", "category": "opening", "position_hint": "northeast nave wall beside dais, connecting to service holding bay", "base_layer_decision": "base_opening" }, { "number": 11, "label": "Service holding bay", "category": "area", "position_hint": "outside northeast side of nave, beyond barred doorway", "base_layer_decision": "base_structural_unit" }, { "number": 12, "label": "Cage movement clearance", "category": "area", "position_hint": "front-right nave, extending west from barred doorway beside dais steps", "base_layer_decision": "base_structural_unit" }, { "number": 13, "label": "Balcony access stair", "category": "area", "position_hint": "southwest edge of nave connecting ground floor to upper balcony", "base_layer_decision": "base_structural_unit" }, { "number": 14, "label": "Ruined sanctuary shell", "category": "area", "position_hint": "perimeter of sanctuary, with limited angular missing wall sections", "base_layer_decision": "base_structural_unit" }, { "number": 15, "label": "Mobile steel cage", "category": "prop", "position_hint": "scene-dependent position within service bay or front-right movement clearance, passing through number 10", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L220B01", "sub_location": "sanctuary_and_dais", "camera_position": "Within the southwest portion of number 1, forward of number 2 and beneath the inner edge of number 6, facing diagonally northeast toward numbers 3, 5, 10, and 12.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "24–28mm wide angle", "framing_notes": "Use one consistent master camera for all listed shots. Include the dais and chair, the east barred doorway, the cage clearance, and the upper balcony railing in the same spatially legible composition. Retain side-window context and ruined perimeter geometry. Number 15 is an overlay-only object whose position follows the applicable scene moment; do not bake the cage or a particular gate state into the reusable architectural background. Preserve space for a crowd around the central approach without drawing people into the plan.", "use_numbered_elements": [ 1, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scene explicitly establishes a ground-floor sanctuary and a second-level balcony; treat these as a tall hall with an overlooking gallery, not two complete stacked floors, and leave the building's total storey count unspecified. A nave footprint roughly 12–20 m wide by 20–35 m long, a gallery floor roughly 3–5 m above the nave, and a hall height roughly 7–12 m are typical conservative reference ranges for this congregational building type, not measurements supplied by the text. The dais is a low raised platform, while the balcony stair spans the full ground-to-gallery rise; size the barred doorway, holding bay, and clearance for a cage containing a bulky robot rather than a child-sized occupant. Stained-glass openings are established but their count and vertical distribution are unspecified, so the paired plan symbols are layout proposals; the later underground prison, arena lift, and exterior tower have no established physical connection within this sanctuary plan.", "applied_shots": [ "S58_Shot5", "S58_Shot15", "S58_Shot25" ], "group_id": "bg_village_church_arena", "depends_on_fp": [] }, "fp_church_forecourt_arena": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram, resembling a simple architectural CAD layout. Use single-weight black outlines, geometric shapes, and a white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only solid flat pastel area fills, without blending or drop shadows.\n\nShow an improvised outdoor fighting arena occupying a village forecourt in front of a church, within a post-disaster settlement of compact courtyard-based houses. Communicate this through a modest, irregularly bounded public court and narrow side passages, not decorative cultural motifs or futuristic styling. Keep surrounding houses, the church interior, underground prison rooms, and the distant water tower outside the drawing. The cardinal arrangement is a schematic continuity convention, not a surveyed location.\n\nPlace north at the top. A broad rectangular arena floor occupies the center, filled pale yellow. Set a compact rectangular cage-lift opening inside its southwest portion, leaving the center and eastern half unobstructed for an east-west confrontation. Draw the fixed lift cage footprint within the opening and its east-facing gate as a simple closed plan symbol; the raised and open operating state belongs only to a separate background overlay. Spectator stand footprints flank the arena on the west and east, each filled pale blue. Show their fixed bench banks as simple parallel rectangular bars, leaving clear aisle breaks. Place a small leader seating platform north of the arena, filled pale lavender, with a single anchor chair centered toward its rear and a short access stair along its west edge. Keep clear sightlines between this seat and the arena center. A pale beige church threshold lies behind the platform, with an entrance opening in the cropped north boundary. Do not extend the plan into the church.\n\nProvide pale cyan escape aisles between each spectator stand and the outer boundary. Connect the west and east aisles to separate permanent perimeter openings near their southern ends. Join both openings with a pale gray exterior circulation apron along the southern edge. Keep the aisles continuous, unobstructed, and distinct from spectator seating. These routes indicate persistent circulation only: do not draw movement arrows or event trails.\n\nUse small white circles containing black numbers as the only object identifiers. Draw each number from 1 through 18 exactly once, adjacent to its corresponding geometry without obscuring it: 1 central arena floor; 2 cage-lift opening; 3 lift cage footprint; 4 east-facing cage gate; 5 west spectator stand; 6 east spectator stand; 7 west fixed bench bank; 8 east fixed bench bank; 9 leader seating platform; 10 leader chair; 11 church threshold; 12 church entrance; 13 west escape aisle; 14 east escape aisle; 15 west perimeter opening; 16 east perimeter opening; 17 southern exterior circulation apron; 18 platform access steps. Treat each bench bank as one continuous seating assembly with one marker. Draw openings as wall gaps, hinged gates or doors with a line and swing arc, the chair as a small rectangular seat symbol, and steps as parallel lines. Optional large generic area labels are limited to Arena, Stands, Threshold, and Circulation. A small N with a north arrow is allowed. No other text, dimensions, annotations, legends, camera icons, or field-of-view cones.\n\nDo not draw markers 19 or 20. Do not depict people, robots, crowds, torches, flames, sunset effects, operating-state highlights, explosions, smoke, bombardment damage, loose debris, or displaced objects. This image records persistent spatial layout only.", "key_elements": [ "Open-air village forecourt arena in front of a cropped church entrance", "Southwest cage-lift opening with an east-facing cage gate", "Clear central-to-eastern confrontation space", "West and east spectator stands with fixed bench banks", "North leader platform and persistent anchor chair", "Continuous side escape aisles connecting to southern exterior circulation", "Schematic cardinal placement and seating arrangement inferred for continuity, not explicitly specified in the scene", "Raised cage state and temporary torches reserved for the background overlay" ], "numbered_elements": [ { "number": 1, "label": "Arena floor", "category": "area", "position_hint": "central forecourt, between the spectator stands", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Cage lift opening", "category": "opening", "position_hint": "southwest portion of the arena floor", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Lift cage assembly", "category": "furniture", "position_hint": "within number 2, with discharge toward the arena center", "base_layer_decision": "base_persistent_fixture" }, { "number": 4, "label": "Cage gate", "category": "opening", "position_hint": "east side of number 3", "base_layer_decision": "base_opening" }, { "number": 5, "label": "West spectator stand", "category": "area", "position_hint": "west edge of the arena, inside the west escape aisle", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "East spectator stand", "category": "area", "position_hint": "east edge of the arena, inside the east escape aisle", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "West bench bank", "category": "furniture", "position_hint": "within number 5, facing east toward the arena", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "East bench bank", "category": "furniture", "position_hint": "within number 6, facing west toward the arena", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Leader platform", "category": "area", "position_hint": "north end of the arena, in front of the church threshold", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Leader chair", "category": "furniture", "position_hint": "rear center of number 9, facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Church threshold", "category": "area", "position_hint": "north of number 9, against the cropped church frontage", "base_layer_decision": "base_structural_unit" }, { "number": 12, "label": "Church entrance", "category": "opening", "position_hint": "north boundary of number 11", "base_layer_decision": "base_opening" }, { "number": 13, "label": "West escape aisle", "category": "area", "position_hint": "outside the west spectator stand, connecting the northern forecourt to number 15", "base_layer_decision": "base_structural_unit" }, { "number": 14, "label": "East escape aisle", "category": "area", "position_hint": "outside the east spectator stand, connecting the northern forecourt to number 16", "base_layer_decision": "base_structural_unit" }, { "number": 15, "label": "West perimeter opening", "category": "opening", "position_hint": "southwest perimeter, between number 13 and number 17", "base_layer_decision": "base_opening" }, { "number": 16, "label": "East perimeter opening", "category": "opening", "position_hint": "southeast perimeter, between number 14 and number 17", "base_layer_decision": "base_opening" }, { "number": 17, "label": "Exterior circulation apron", "category": "area", "position_hint": "along the southern exterior edge, linking both perimeter openings", "base_layer_decision": "base_structural_unit" }, { "number": 18, "label": "Platform access steps", "category": "furniture", "position_hint": "west edge of number 9, accessible from the northern end of number 13", "base_layer_decision": "base_persistent_fixture" }, { "number": 19, "label": "Raised cage and open gate state", "category": "prop", "position_hint": "at numbers 2, 3, and 4; cage at arena level and gate open toward the center", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 20, "label": "Temporary perimeter torches", "category": "prop", "position_hint": "scattered along arena-facing stand edges, clear of escape aisles and the confrontation space", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L229B01", "sub_location": "forecourt_arena_and_stands", "camera_position": "near the southern edge of number 1, just north of number 17 and southeast of number 2, facing north across the arena toward numbers 9 and 10", "camera_height": "standing eye level, approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Keep the west-to-east confrontation axis readable across the frame, with the central entrant position left of the opposing eastern position. Retain the raised cage at lower left, spectator stands on both sides, and the leader platform behind the arena. Downstream background state includes cheering spectators, sunset illumination, and temporary torches; none belongs on the plan. Preserve the pre-bombardment arena state: no fresh blast damage, smoke, invading troops, or aftermath debris. The exterior apron and its southern exit mouths may remain behind the camera.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 18, 19, 20 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The arena is an open-air ground-level court, not an enclosed stadium; a fighting-floor span of roughly 15–25 m is a typical conservative staging range for an improvised village arena, not a measurement specified by the text. The cage lift connects an underground holding space to the surface through the explicitly described overhead opening; its travel distance and the total underground level count are unspecified. The adjacent church explicitly contains a second-level balcony, so it must retain an upper occupied level rather than becoming a single-storey shed, although its overall height and facade opening counts are not established. Low spectator terraces and a modestly raised leader platform are typical staging assumptions rather than specified dimensions; the cage and its gate must accommodate a bulky combat robot without constricting the clear arena floor.", "applied_shots": [ "S60_Shot4" ], "group_id": "bg_village_church_arena", "depends_on_fp": [] }, "fp_dungeon_cell": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan, resembling a clean architectural CAD diagram. Use single-weight black outlines, geometric shapes only, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show a modest rectangular underground detention cell, slightly deeper north-to-south than wide, with solid north, east, and west enclosure walls and a barred southern frontage adjoining a narrow external access passage. Its utilitarian layout belongs to an improvised detention space in a future post-disaster Korean setting, not a medieval dungeon; add no decorative architecture or speculative technology. Represent the stationary barred frontage with regularly spaced short line symbols in plan. Place a simple hinged barred gate at the eastern end of this frontage, using a straight leaf and a swing arc opening into the passage. This gate position is a schematic continuity choice. Keep the cell mostly empty, with a small floor-level straw bedding footprint in the southwest corner, just north of the barred frontage. Represent this bedding with a plain geometric outline, without straw texture or a raised bed frame. Fill the main cell area uniformly pale blue, its small corner bedding zone uniformly pale yellow, and the external access passage uniformly pale beige. Each area has one solid pastel fill, with no blending. Place exactly one small white circle containing each black base-marker number: 1 in the main cell enclosure, 2 beside the stationary barred frontage, 3 beside the gate, 4 in the external passage, and 5 within the corner bedding footprint. Each number appears exactly once. Do not draw marker 6 or any pooled water: that mutable floor condition belongs exclusively to the separate background overlay. Do not draw people, food, handheld straw, bodily injuries, bloodstains, wall marks, or flashback locations. Add no beds, benches, plumbing, windows, stairs, or other unsupported fixtures. No text other than the numbered circles is needed. Do not draw a legend, dimensions, camera symbols, viewing cones, or camera arrows.", "key_elements": [ "Mostly empty rectangular underground cell with three solid enclosure walls", "Barred southern frontage with an eastern-end access gate", "Narrow external passage immediately beyond the bars", "Persistent floor-level straw bedding corner at the southwest", "Pooled floor water retained through a separate state overlay for both shots", "No conversion of bodily radiation injuries into environmental bloodstains or wall damage" ], "numbered_elements": [ { "number": 1, "label": "Cell enclosure", "category": "area", "position_hint": "Main rectangle north of the barred frontage; solid north, east, and west boundaries", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Stationary barred frontage", "category": "opening", "position_hint": "Southern cell boundary, west of the access gate", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Barred access gate", "category": "opening", "position_hint": "Eastern end of the southern frontage; schematic inferred access position", "base_layer_decision": "base_opening" }, { "number": 4, "label": "External access passage", "category": "area", "position_hint": "Narrow strip directly south of the cell frontage", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Straw floor bedding", "category": "furniture", "position_hint": "Southwest interior corner, set just north of the bars; persistent floor-level bedding rather than a bed frame", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Pooled floor water", "category": "prop", "position_hint": "West-central cell floor, immediately northeast of the straw bedding and reachable from it", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L222B02", "sub_location": "dungeon_cell", "camera_position": "Inside number 1 near the northeast corner, facing diagonally southwest toward number 5, with number 6 on the intervening floor and numbers 2 and 3 along the far southern boundary; number 4 is glimpsed beyond the bars.", "camera_height": "Low seated eye level, approximately 1.0–1.2 m; a staging recommendation rather than a measured site height", "lens_hint": "35mm equivalent for the shared spatial reference; derive tighter shot crops without changing the camera side", "framing_notes": "Maintain the same barred frontage, straw corner, and pooled-water placement for both shots. Keep the barred gate closed. The potato exchange and bodily scar close-up are subject action, not new background fixtures or environmental stains. Preserve the dark daytime underground setting in downstream backgrounds, not through shading on this schematic.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The scene establishes an underground cell level, but neither the number of basement levels nor the enclosing building's total storey count or height is specified. A cell footprint roughly 3–5 m across and 4–6 m deep, with approximately 2.3–3 m clear height, is a typical conservative staging range for an improvised utilitarian detention room, not a textual measurement. The barred frontage should extend from floor to near ceiling; its single access gate is a schematic inference, and no exterior windows are established. Straw bedding and pooled water remain at floor level, with no raised platform, stair run, or additional vertical structure established within this scope.", "applied_shots": [ "S59_Shot10", "S59_Shot18" ], "group_id": "bg_village_dungeon", "depends_on_fp": [] }, "fp_robot_parts_warehouse": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan diagram of a large disused robot-parts warehouse. Use single-weight black outlines, geometric shapes only, and solid pastel area fills on a white background, like a simple architectural CAD plan. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show one broad rectangular industrial hall, north at the top, with no invented internal rooms, upper levels, windows, or additional entrances. Its practical open storage layout should be consistent with a reused industrial warehouse in a future post-disaster Korean setting, without decorative cultural motifs or speculative high-tech fixtures. Fill the main circulation floor pale yellow and place circled number 1 in its clear central portion. Add a short exterior threshold apron outside the west wall near its southern third, filled pale beige, with circled number 2. Connect this apron to the hall through a broad hinged entry opening, using a simple door-leaf line and swing arc, with circled number 3 beside the jamb; the glyph indicates the opening convention, not a frozen event state. Keep an unobstructed route from this entrance into the center and toward the east side. In the northwest corner, show a large persistent salvage stockpile footprint filled pale gray, containing a sparse cluster of simple rectangles, circles, and joint-like geometric pieces representing stored broken robots and mechanical parts; place circled number 4 once for the aggregate storage unit, not on individual loose pieces. On the east side, leave a generous clear floor pocket filled pale blue, with circled number 5, large enough for two bulky robots to sit beside one another; do not draw any robots or people there. Immediately north of this pocket, against the northeast corner, designate a small refuge footprint filled pale cyan with circled number 6. This is an unpartitioned floor location, not a built enclosure or an invented nest. Its approach faces south toward the adjacent clear pocket. Show colored functional boundaries without turning them into walls. Keep the refuge location fixed, but do not draw its movable concealing box, any alternate box position, birds, or revelation cues. Draw only circled black numbers 1 through 6, each exactly once; number 7 is reserved for a separate state overlay and must not appear. No text labels, legends, dimensions, camera symbols, field-of-view cones, movement arrows, or other annotations.", "key_elements": [ "Single large industrial hall with a broad, unobstructed circulation floor.", "West-side entrance and exterior threshold; the half-open door state is maintained downstream.", "Persistent northwest-corner stockpile of broken robots and mechanical parts.", "Fixed east-side clear floor pocket for the robot interaction.", "Fixed northeast refuge location directly beside the interaction pocket.", "Movable concealing box belongs exclusively to a state overlay, allowing concealment and later revelation without changing the plan." ], "numbered_elements": [ { "number": 1, "label": "Warehouse hall", "category": "area", "position_hint": "Main rectangular interior, with clear central circulation", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Exterior threshold", "category": "area", "position_hint": "Immediately outside the west wall near its southern third", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Warehouse entry", "category": "opening", "position_hint": "West wall near its southern third, connecting threshold and hall", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Robot salvage stockpile", "category": "area", "position_hint": "Northwest corner, against the north and west walls", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Clear interaction pocket", "category": "area", "position_hint": "East side of the hall, immediately south of the refuge", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Refuge floor location", "category": "area", "position_hint": "Northeast corner, approached from the clear pocket to its south", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Movable concealing box", "category": "prop", "position_hint": "Initially across the south-facing approach to number 6; moved aside locally for the final reveal, with no fixed final placement specified", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L238B01", "sub_location": "robot_parts_warehouse", "camera_position": "Inside number 1 near the south wall, facing north with a slight eastward bias toward numbers 5 and 6; retain number 3 toward the left edge and number 4 in the far-left background.", "camera_height": "Standing eye level, approximately 1.6m", "lens_hint": "24mm wide angle", "framing_notes": "Use the same camera for all listed shots. Preserve the west-entry-to-east-pocket relationship and the fixed refuge location. Downstream backgrounds should contrast daylight at the half-open number 3 with the dim interior, without adding light effects to the plan. Number 7 is a state-dependent overlay: it conceals the refuge before being moved aside for the final revelation. Never depict both box positions simultaneously or show birds through the concealing box; birds and active robots are scene subjects, not permanent plan fixtures.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The text establishes a very large mechanical-parts warehouse but gives no dimensions or storey count; a single tall storage volume with roughly 5–9 m clear height is a conservative typical industrial interpretation, not a confirmed building height. A footprint on the order of 15–30 m wide by 20–40 m long is a typical working range rather than a measured specification. One half-open entry is explicitly described; additional facade openings, upper floors, stairs, and mezzanines are unspecified and should not be invented. The corner stockpile is described as towering, so it should read as a substantial vertical accumulation rather than a thin scatter, while the refuge remains at floor level beside a pocket accommodating bulky robot bodies.", "applied_shots": [ "S64_Shot7", "S64_Shot15", "S64_Shot24" ], "group_id": "bg_robot_parts_warehouse", "depends_on_fp": [] }, "fp_collapsed_store_site": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic site plan of a partially collapsed department store and its reclaimed exterior terrain. Use a clean architectural CAD-plan appearance: single-weight black outlines, white background, simple geometric shapes, and solid pastel area fills. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Depict only horizontal footprints, never elevations or stacked-storey illustrations.\n\nUse the broad commercial-building footprint and large open forecourt appropriate to a disaster-damaged modern metropolitan retail complex, rather than a domestic courtyard or traditional compound. Orient the building across the northern half of the image and the exterior approach in the southern half. The northern and northeastern portion is a surviving structural remnant, number 1, filled pale blue-gray. The northwestern and central frontage is a broad collapsed rubble field, number 2, filled pale gray, with a few large angular outlines representing consolidated slab fragments rather than detailed debris. These two areas together establish a building that has substantially, approximately half, collapsed. A continuous pale-beige approach corridor, number 3, enters from the bottom center, bends gently toward the northeast around pools, and reaches a breach, number 4, in the south-facing surviving wall. Draw the breach as an irregular clear gap without a door leaf or swing arc. Stop the plan at this entrance; do not develop the interior.\n\nPlace a surviving concrete overlook footprint, number 5, along the eastern frontage immediately east of the entrance breach, filled pale lavender. Its exposed southern and western edges face the approach and forecourt. Show its plan boundary only; its elevated status belongs to metadata, not a drawn elevation. Keep the approach outside this footprint and maintain a clear sight corridor from the overlook to the approach and entrance.\n\nPlace a larger polygonal pool, number 6, southwest of the entrance and west of the path, and a smaller polygonal pool, number 7, southeast of the entrance and east of the path. Both use the same flat pale-cyan fill, without reflections or ripple patterns. Place a broad moss-covered ground zone, number 8, between the western rubble margin, the larger pool, and the approach, filled pale mint green; this is a bounded terrain patch, not a moss texture. Place irregularly spaced tree-growth clusters, number 9, along the western forecourt edge and, number 10, along the eastern site edge beyond the smaller pool. Use simple canopy circles inside pale-sage-green cluster footprints, keeping the central approach visually open. Place a small established flower-growth patch, number 11, immediately beside the moss zone on the west edge of the approach, filled pale peach; use only a simple bounded patch, not decorative flower illustrations.\n\nDraw exactly one small white circle containing a black integer for each numbered element, 1 through 11. Each number must appear once only, placed clearly within or beside its associated footprint or opening. All listed elements are persistent base-layout elements. Do not add unnumbered fixtures, doors, windows, furniture, or freestanding props. Do not include people, observers, animals, masks, handheld equipment, radiation graphics, motion cues, discarded objects, sinkholes, ropes, or interior rescue events. No text other than the numbered circles is necessary. No legend, dimensions, camera symbols, sightline arrows, or field-of-view cones. Use one consistent flat pastel fill per zone type, with no blending or drop shadows.", "key_elements": [ "Large retail-building remnant adjoining an extensive collapsed frontage", "Continuous exterior approach passing between pools and entering a wall breach", "Elevated concrete overlook beside the entrance with a clear view of the approach", "Persistent moss, tree-growth clusters, and a flower patch represented as bounded terrain zones", "Exterior-only scope; interior collapse and rescue events excluded" ], "numbered_elements": [ { "number": 1, "label": "Surviving building remnant", "category": "area", "position_hint": "Northern and northeastern portion of the building footprint", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Collapsed rubble field", "category": "area", "position_hint": "Northwestern footprint and central building frontage, adjoining number 1", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Exterior approach corridor", "category": "area", "position_hint": "From the south-center site edge, bending northeast between the pools toward number 4", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Entrance breach", "category": "opening", "position_hint": "South-facing wall of number 1, at the northern end of number 3", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Concrete overlook", "category": "area", "position_hint": "Eastern surviving frontage, immediately east of number 4, overlooking the exterior approach", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Western pool", "category": "area", "position_hint": "West of number 3 and southwest of number 4", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Eastern pool", "category": "area", "position_hint": "East of number 3 and southeast of number 4, south of the overlook", "base_layer_decision": "base_structural_unit" }, { "number": 8, "label": "Moss-covered ground", "category": "area", "position_hint": "Between the western rubble margin, number 6, and the west edge of number 3", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Western tree cluster", "category": "area", "position_hint": "Western forecourt boundary, bordering the rubble and moss zones", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Eastern tree cluster", "category": "area", "position_hint": "Eastern site boundary, beyond number 7 and away from the central sight corridor", "base_layer_decision": "base_structural_unit" }, { "number": 11, "label": "Flower-growth patch", "category": "area", "position_hint": "West edge of number 3, immediately adjoining number 8", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L239B01", "sub_location": "reclaimed_ruins", "camera_position": "At the northern side of number 5 (concrete overlook), facing southwest and looking downward across number 4 (entrance breach), number 3 (approach corridor), and the reclaimed forecourt.", "camera_height": "Standing eye-level approximately 1.6 m above the elevated slab; slab elevation above the forecourt is unspecified.", "lens_hint": "24–28mm wide angle", "framing_notes": "Use one fixed elevated oblique view for all associated shots. Include the exposed edge of number 5 in the foreground, number 4 near the building edge, and number 3 extending into the distance. Keep both pools and vegetation zones readable, with numbers 1 and 2 establishing the damaged building along the upper or side edge. Convey daylight and ecological recovery in the downstream background, not through effects in the plan.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The interior directory establishes at least three above-ground storeys and one basement level in the original department store; the total original storey count and surviving height are unspecified, and the building must not be reduced to a single-storey ruin. Commercial floor-to-floor heights of roughly 4–6 m and a footprint spanning several tens of metres or more are conservative typical guides for a large metropolitan department store, not measured dimensions from the text. The concrete overlook is a surviving elevated slab above the exterior approach, but its exact floor and height are unspecified; retain a meaningful downward view without inventing a stair connection. The entrance breach is the only opening established for this exterior plan, while original facade opening counts are unknown and should not be inferred as a regular window grid.", "applied_shots": [ "S65_Shot5", "S65_Shot10", "S65_Shot20" ], "group_id": "bg_collapsed_department_store", "depends_on_fp": [] }, "fp_collapsed_store_ground": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a collapsed department-store ground-floor approach and its opening onto a basement food department. Use a clean architectural CAD-plan appearance: single-weight black outlines, white background, simple geometric symbols, and single flat pastel solid fills. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Represent the ruin through interrupted wall geometry and an angular opening boundary only, not rubble textures or atmospheric effects. Derive the layout from a large contemporary commercial building surviving into a future post-disaster Korean setting: broad retail circulation, a freestanding directory near the entry, an escalator approach, and substantial food-display islands below. Do not add traditional domestic features or speculative futuristic equipment. This is a local plan crop, not the complete building footprint. Place an exterior access strip at the west edge, a breached entrance into the southwest part of the ground-floor approach, the directory just inside that breach, and surviving wall fragments along the north and east boundaries. Keep the central approach broad and unobstructed. Place a large angular collapse opening in the east-central portion of the crop, with a continuous standing strip along its west and northwest rim. Place the partially exposed escalator along the opening's northeast edge, running from its upper landing toward the lower food department; use a narrow rectangle with evenly spaced transverse lines and no direction arrow. Show only the basement floor and display footprints directly exposed within the opening, as a flat registered lower-level plan visible through the missing slab. Do not show hidden basement areas through intact flooring, and do not draw a section, elevation, inset, or displaced second plan. Leave an open landing area immediately below the west rim, then place two rectangular food-display islands farther east and southeast within the exposed lower-level footprint, preserving a clear view between the upper rim and the displays. Use pale gray for the exterior strip, pale beige for the entrance threshold, pale yellow for the intact ground-floor approach, pale peach for the rim standing strip, pale cyan for the escalator circulation footprint, and pale blue for the exposed basement food area. Each area has one consistent solid fill with no blending. Draw small circles containing black numbers 1 through 13, each exactly once, attached to their corresponding units or symbols: 1 exterior access strip; 2 breached entrance; 3 ground-floor approach; 4 fixed directory; 5 north wall remnant; 6 east wall remnant; 7 collapse opening boundary; 8 west and northwest rim standing strip; 9 escalator upper landing; 10 escalator; 11 exposed basement food area; 12 east display island; 13 southeast display island. Keep markers 7 and 11 separated, with 7 on the opening boundary and 11 in the exposed lower-floor area. Use plain rectangular top-down symbols for the directory and display islands. Do not draw markers 14 or 15, ropes, canned goods, people, silhouettes, flashlights, parasols, rain, dust effects, falling debris, or other event-state details. No text except the numbered circles and optional short generic area labels such as Threshold Zone, Shared Zone, and Lower Zone. No directory lettering, dimensions, legend, camera symbols, field-of-view cones, sightline arrows, or height annotations.", "key_elements": [ "Local post-collapse ground-floor topology, not a complete department-store plan", "Breached entry and fixed directory leading into broad retail circulation", "Surviving wall remnants framing a partially exposed escalator", "Continuous upper-rim standing strip overlooking the collapse opening", "Basement food displays registered beneath the opening rather than placed on the ground floor", "Clear vertical connection between the upper rim, lower landing area, and food-display islands", "Rescue rope and loose canned-food foreground reserved for background overlays" ], "numbered_elements": [ { "number": 1, "label": "Exterior access strip", "category": "area", "position_hint": "west edge of the local plan crop", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Breached entrance", "category": "opening", "position_hint": "southwest boundary between exterior access and ground-floor approach", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Ground-floor approach", "category": "area", "position_hint": "west-central interior, between breached entrance and collapse rim", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Fixed directory", "category": "prop", "position_hint": "inside the southwest entrance, beside the approach rather than blocking it", "base_layer_decision": "base_persistent_fixture" }, { "number": 5, "label": "North wall remnant", "category": "area", "position_hint": "north boundary of ground-floor approach, west of escalator landing", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "East wall remnant", "category": "area", "position_hint": "east boundary beyond the escalator and collapse opening", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Collapse opening", "category": "opening", "position_hint": "large east-central slab opening; marker on its southwest boundary", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Upper rim standing strip", "category": "area", "position_hint": "continuous intact strip along the west and northwest sides of the opening", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Escalator upper landing", "category": "area", "position_hint": "northeast end of the approach, adjoining the northwest end of the escalator", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Partially exposed escalator", "category": "prop", "position_hint": "along the northeast edge of the opening, connecting the upper landing toward the lower retail floor", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Exposed basement food area", "category": "area", "position_hint": "within the opening's registered footprint, physically below the ground floor", "base_layer_decision": "base_structural_unit" }, { "number": 12, "label": "East food-display island", "category": "furniture", "position_hint": "eastern part of the exposed basement area, beyond the clear landing area", "base_layer_decision": "base_persistent_furniture" }, { "number": 13, "label": "Southeast food-display island", "category": "furniture", "position_hint": "southeast part of the exposed basement area, separated from the east island by an aisle", "base_layer_decision": "base_persistent_furniture" }, { "number": 14, "label": "Lowered rescue rope", "category": "prop", "position_hint": "descends from the northwest upper rim into the clear basement landing area", "base_layer_decision": "state_overlay_transient_object" }, { "number": 15, "label": "Loose canned-food foreground", "category": "prop", "position_hint": "on the near end of the east basement display island, below the upper rim", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L240B01", "sub_location": "ground_floor_collapse_opening", "camera_position": "At the southeast edge of number 11 (exposed basement food area), beside number 13, looking northwest past number 12 toward number 7 (collapse opening) and number 8 (upper rim standing strip); number 10 remains visible along the right side of the connected vertical space.", "camera_height": "Near standing eye level above the basement floor, approximately 1.5–1.7 m, tilted upward toward the ground-floor rim", "lens_hint": "24–28mm wide angle", "framing_notes": "Use one consistent lower-level view for all assigned shots. Keep number 12 and overlay number 15 in the lower foreground, with number 7 and number 8 high in the frame so a separately staged rescuer can look downward from the rim. Include overlay number 14 descending into the central clear space. Preserve the physical separation between basement displays and ground-floor approach; do not flatten them into one storey. Retain wall remnants and the exposed escalator as orientation anchors. The directory may remain occluded from this camera. Daytime darkness belongs to the downstream background, not the schematic plan.", "use_numbered_elements": [ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The source establishes a large multi-level department store with a ground-floor approach above a basement food department; the complete building storey count and surviving overall height are not specified. A commercial floor-to-floor height of roughly 4–6 m is a typical conservative reference for this building type, not a measured scene fact, and the unusually distant overhead opening should not be compressed into domestic-room proportions. Treat the local approach and collapse area as a broad retail bay, typically on the order of 10–20 m across rather than a small room; the actual footprint is unspecified. The escalator connects distinct floor levels, and the rescue rope extends from the upper rim down to the basement landing area; facade opening counts and the full extent of any additional basement levels are not established.", "applied_shots": [ "S66_Shot14", "S66_Shot26", "S66_Shot36" ], "group_id": "bg_collapsed_department_store", "depends_on_fp": [] }, "fp_assigned_vehicle_cabin": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an enclosed fuel-powered truck cabin. Use a simple architectural CAD layout: single-weight black outlines, geometric symbols, and a white background. Absolutely no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, or material rendering. Do not depict the cargo body or surrounding buildings. Put the vehicle front at the top of the page; this is vehicle orientation, not geographic north. Use a conservative extended-cabin arrangement with left-hand driving controls, ordinary seats, and a rear passenger bench, appropriate to a surviving utilitarian vehicle in a future disaster-affected society. This is a continuity layout, not a claim about a specific truck model. Keep the rear passenger space connected to the front seats without a partition. Provide enough clear floor between the front seats and rear bench for occupants to turn and assist a seated passenger. Fill the front driving area pale cyan, the rear shared passenger area pale blue, the right-side access threshold pale beige, and a narrow exterior strip beside that threshold pale gray. Each zone has one uniform solid pastel fill; no blending. Define zone boundaries with the fills rather than invented interior walls. Draw a compact rounded rectangular cabin perimeter. Place a dashboard across the front, a steering wheel behind its left portion, a driver seat behind the steering wheel, and a front passenger seat to its right. Place a transverse rear bench against the rear cabin boundary. The principal access doorway is on the right side immediately ahead of the rear bench; its threshold connects directly to the exterior strip. Place a rear passenger window in the right side wall beside the bench, behind the doorway. Include a windshield across the front, a left driver door with its own window, and a right front side window beside the front passenger seat. Represent seats and the bench as simple rectangles with cushion divisions, the dashboard as a shallow rectangle, the steering wheel as a simple ring, windows as double parallel lines, and hinged doors as a line with a thin swing arc. Door swing arcs indicate mechanical clearance only, not a scene-specific open-door state. Put exactly one small white circle with a black number at each of these anchors: 1 front driving area; 2 rear passenger area; 3 right access threshold; 4 adjacent exterior strip; 5 dashboard; 6 steering wheel; 7 driver seat; 8 rear passenger bench; 9 windshield; 10 driver door; 11 driver-door window; 12 right passenger access door; 13 rear passenger side window; 14 right front side window; 15 front passenger seat. Keep neighboring markers separated and legible. Draw only markers 1 through 15. Do not draw markers 16 or 17, or any other transient event marker. Optional area text is limited to Service Zone, Shared Zone, Threshold Zone, and Exterior Zone. No other text, legend, dimensions, camera icons, field-of-view cones, or camera arrows. Do not draw people, blood, wounds, rain, flashlight beams, reflections, loose objects, or rescue-event imagery.", "key_elements": [ "Provisional extended truck cabin with left-hand driving controls and conventional fuel-vehicle equipment", "Connected front seating and rear passenger space, without an interior partition", "Rear bench beside a side window for the intimate passenger close-up", "Right-side access doorway immediately ahead of the rear bench, supporting an interior-to-exterior rescue view", "Small exterior reference strip only; no invented cargo compartment or wider road layout", "Persistent geometry remains unchanged across both backgrounds; door position and arrival lighting are separate overlays", "Blood is confined to the injured character where required, not added to cabin surfaces" ], "numbered_elements": [ { "number": 1, "label": "Front driving area", "category": "area", "position_hint": "front half of cabin, top of diagram", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Rear passenger area", "category": "area", "position_hint": "rear half of cabin, connected to front seating", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Passenger access threshold", "category": "area", "position_hint": "right cabin edge, immediately ahead of rear bench", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Exterior reference strip", "category": "area", "position_hint": "immediately outside right passenger access threshold", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Dashboard", "category": "prop", "position_hint": "across front cabin boundary, beneath windshield", "base_layer_decision": "base_persistent_fixture" }, { "number": 6, "label": "Steering wheel", "category": "prop", "position_hint": "front left, between dashboard and driver seat", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Driver seat", "category": "furniture", "position_hint": "front left, behind steering wheel", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Rear passenger bench", "category": "furniture", "position_hint": "across rear cabin boundary, right end beside passenger window", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Windshield", "category": "opening", "position_hint": "front cabin boundary above dashboard", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Driver door", "category": "opening", "position_hint": "left cabin boundary beside driver seat", "base_layer_decision": "base_opening" }, { "number": 11, "label": "Driver door window", "category": "opening", "position_hint": "within driver door, left side of front cabin", "base_layer_decision": "base_opening" }, { "number": 12, "label": "Passenger access door", "category": "opening", "position_hint": "right cabin boundary at threshold, immediately ahead of rear bench", "base_layer_decision": "base_opening" }, { "number": 13, "label": "Rear passenger window", "category": "opening", "position_hint": "right rear cabin wall beside bench, behind access doorway", "base_layer_decision": "base_opening" }, { "number": 14, "label": "Front passenger window", "category": "opening", "position_hint": "right front cabin wall beside front passenger seat", "base_layer_decision": "base_opening" }, { "number": 15, "label": "Front passenger seat", "category": "furniture", "position_hint": "front right, beside driver seat and ahead of access threshold", "base_layer_decision": "base_persistent_furniture" }, { "number": 16, "label": "Rescue door open state", "category": "opening", "position_hint": "passenger access door at number 12, opening onto number 4", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 17, "label": "Exterior flashlight arrival", "category": "prop", "position_hint": "outside number 12 in number 4, directed through number 3 into cabin", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L248B03", "sub_location": "rear_passenger_window_seat", "camera_position": "Inside number 2, just ahead and left of number 8, facing diagonally toward the right end of number 8 and number 13.", "camera_height": "seated torso level, approximately 0.9–1.1 m above the cabin floor", "lens_hint": "65–85mm close-up", "framing_notes": "Use a tight crop of the dark seat and adjacent window as the background for the injured passenger's hand held against the side. The blood belongs only to the character treatment; do not add blood to the bench, floor, door, or walls. Keep the doorway and exterior rescue activity out of frame. Night darkness is background treatment, not a change to the base plan.", "use_numbered_elements": [ 2, 8, 13 ], "ignore_numbered_elements": [ 16, 17 ] }, { "bg_id": "L248B02", "sub_location": "passenger_access_doorway", "camera_position": "Inside number 2 near the left end of number 8, facing across number 3 and through number 12 toward number 4.", "camera_height": "seated eye level, approximately 1.1–1.3 m above the cabin floor", "lens_hint": "28–35mm wide angle", "framing_notes": "Frame the open doorway prominently, with a small bench edge anchoring the cabin foreground. Apply number 16 to the existing door rather than adding another opening. Exterior flashlights at number 17 backlight arriving silhouettes on the rainy nighttime road; leave a central sightline for a cleric to become visible among them. People and weather are shot staging, not permanent plan fixtures. Do not add generalized cabin bloodstains.", "use_numbered_elements": [ 2, 3, 4, 8, 12, 16, 17 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This scope is a single occupied vehicle level, not a building; the text does not specify the truck model, cabin dimensions, or door and window counts. A cabin roughly 2–2.5 m wide and 2–3 m long, with roughly 1.4–1.8 m of internal headroom, is a typical conservative reference range for the extended utility-truck arrangement proposed here, not a measured specification. The left-hand driving position and connected rear seating are provisional layout conventions; the illustrated openings establish continuity rather than source-confirmed counts. Keep the cabin floor raised above the road by a normal truck entry level change, with the doorway extending from its sill to near the cabin roof; its exact height is unspecified.", "applied_shots": [ "S72_Shot43", "S72_Shot58" ], "group_id": "bg_coastal_flowerfield_laboratory", "depends_on_fp": [] }, "fp_clinic_ward": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a modest regional clinic ward in a future disaster-affected society. Use the practical rectangular room organization and conventional freestanding hospital bed of a resource-limited contemporary-derived clinic, not a futuristic medical laboratory. The diagram must look like a simple architectural CAD plan: single-weight black outlines, geometric shapes only, white background, and flat solid pastel zone fills. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. North is at the top, but do not draw an orientation arrow. Draw one rectangular ward with four adjoining functional zones, without internal partition walls: a pale blue patient-care zone in the northwest, a pale yellow shared bedside gathering zone across the center and southwest, a pale gray circulation strip along the east side, and a pale beige entrance threshold at the southeast corner. Give each zone exactly one solid fill, with no blending or overlapping fills. Place a single hospital bed in the northwest zone, oriented north-south with its pillow and head toward the north wall. Leave access on both long sides and a generous clear area beyond its foot. Draw the bed as a simple rectangle with a small pillow rectangle. Keep the center and southwest free of furniture so several visitors and a bulky adult-scale mechanical companion can gather without blocking access to the patient. Put the entrance door at the east end of the south wall, hinged at its east jamb and swinging inward against the east wall, represented by a leaf line and swing arc. Connect the threshold directly to the east circulation strip and the central gathering area. Do not add unestablished adjacent rooms, other beds, windows, medical machines, loose supplies, or decorative furnishings. Draw exactly seven small white circles with black numbers, each number appearing once: 1 just inside the north wall clear of the bed identifies the whole ward; 2 in the open floor west of the bed identifies the patient-care zone; 3 in the central open floor identifies the bedside gathering zone; 4 midway along the east strip identifies circulation; 5 in the southeast threshold clear of the door arc identifies the entrance threshold; 6 inside the bed rectangle below the pillow identifies the bed; 7 beside the south-wall door opening identifies the entrance door. Use numbers only, with no room names, legends, dimensions, or other text. Do not draw people, robots, patient symptoms, event cues, displaced objects, camera icons, camera arrows, or field-of-view cones. Preserve the same permanent arrangement for quiet bedside visits and urgent medical consultation.", "key_elements": [ "Single modest clinic ward with an unchanged layout across both scenes", "North-south hospital bed in the northwest, with head against the north side", "Open bedside gathering space accommodating multiple visitors and a bulky mechanical companion", "Unobstructed east-side circulation between entrance and bedside", "Southeast entrance with door swing kept outside the main gathering area", "Flat pastel functional zones without internal partition walls", "No environmental state-overlay markers are needed; the scene differences concern occupants and patient condition" ], "numbered_elements": [ { "number": 1, "label": "Clinic ward", "category": "area", "position_hint": "Entire rectangular room; marker just inside the north wall, clear of the bed", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Patient care zone", "category": "area", "position_hint": "Northwest portion of the ward, surrounding the bed", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Bedside gathering zone", "category": "area", "position_hint": "Center and southwest, adjoining the bed's east side and foot", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Clear circulation", "category": "area", "position_hint": "East-side strip connecting the entrance threshold to bedside access", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Entrance threshold", "category": "area", "position_hint": "Southeast corner immediately inside the entrance door", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Hospital bed", "category": "furniture", "position_hint": "Northwest care zone, long axis north-south and pillow toward the north wall", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Entrance door", "category": "opening", "position_hint": "East end of the south wall, hinged at the east jamb and opening inward toward the east wall", "base_layer_decision": "base_opening" } ], "camera_recommendations": [ { "bg_id": "L253B02", "sub_location": "clinic_ward", "camera_position": "Near the southwest edge of number 3 (bedside gathering zone), facing northeast across number 6 (hospital bed) toward number 4 (clear circulation), with number 7 (entrance door) at the right edge of the composition.", "camera_height": "Standing eye level, approximately 1.5-1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Keep the bed on the left and the gathering space open in the center. Retain the entrance at the far right so arrivals and a reunion have a readable spatial relationship to the bedside. Do not populate the background plate with occupants.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ], "ignore_numbered_elements": [] }, { "bg_id": "L253B01", "sub_location": "clinic_ward", "camera_position": "At the southern end of number 3 (bedside gathering zone), slightly west of number 5 (entrance threshold), facing north toward number 6 (hospital bed) and the open space between numbers 3 and 4.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "28-32mm wide angle", "framing_notes": "Keep the bed left of center and preserve open floor on its east side for a doctor and visitor facing one another. Include the east circulation strip and ample composition space for a bulky standing companion and a raised arm. Maintain the quiet scene's exact bed and door positions; the entrance is behind or beside the camera, not removed.", "use_numbered_elements": [ 1, 2, 3, 4, 6 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This plan covers one ward on a single floor; the clinic's total storey count and overall building height are not specified, so do not infer a single-storey building from this drawing. A room footprint roughly 5-7 m across and 5-7 m deep, with a ceiling approximately 2.7-3.3 m high, is a typical contemporary-derived regional-clinic planning range rather than a measured fact from the scenes. Keep adult-scale bedside access and generous circulation for several standing visitors and a bulky mechanical companion; the depicted entrance is a layout provision, not evidence of the building's total door or window counts.", "applied_shots": [ "S73_Shot2", "S73_Shot5", "S73_Shot11", "S76_Shot1", "S76_Shot6", "S76_Shot12" ], "group_id": "bg_port_town_clinic", "depends_on_fp": [] }, "fp_l256_aircraft_storage": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a large abandoned airfield storage hangar. Use a clean architectural CAD-plan appearance: single-weight black outlines, geometric shapes only, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Show only persistent layout, not the nighttime appearance or surface condition. Derive the layout from a repurposed older military-airfield warehouse in a future post-disaster setting: a broad rectangular, undivided hangar with densely parked conventional light aircraft, rather than futuristic vehicles or domestic rooms. Place the rear wall at the top and the entrance wall at the bottom. Fill the main storage area with solid pale gray, a narrow central viewing aisle with solid pale yellow, and a shallow entrance threshold with solid pale beige. These are contiguous functional areas without internal partition walls; use no blending or gradients. The central aisle runs from the entrance threshold toward the rear wall and remains unobstructed. Center a very large double-leaf doorway in the bottom wall, using simple door lines and outward swing arcs. Arrange six representative parked light-aircraft anchors in two close-packed columns of three, flanking the aisle, with noses toward the entrance. Their simple top-down glyphs consist of a narrow fuselage rectangle, transverse wing shapes, short tailplanes, and a small triangular nose. Keep wings clear of the aisle and other aircraft; leave only narrow storage clearances between rows. The six anchors establish a repeatable schematic arrangement, not a documented fleet count. Draw a small white circle containing a black number exactly once for each base element: 1 in an open corner of the main storage area, 2 in the central aisle, 3 in the entrance threshold, 4 beside the large doorway, 5 on the southwest aircraft, 6 on the west-middle aircraft, 7 on the northwest aircraft, 8 on the southeast aircraft, 9 on the east-middle aircraft, and 10 on the northeast aircraft. Do not draw marker 11 or any dust marks. No people, robots, helicopters, loose repair tools, exhaust, operating propellers, diagnostic graphics, flickering bulbs, or event cues. Do not add unsupported windows, side rooms, stairs, or furnishings. No text other than the numbered circles. No camera symbols, field-of-view cones, dimensions, legends, elevations, or height annotations.", "key_elements": [ "Large undivided airfield storage hangar", "Oversized entrance opening centered on the south wall", "Continuous central viewing aisle connected to the entrance threshold", "Close-packed conventional light aircraft on both sides of the aisle", "Six representative aircraft anchors with consistent positions", "Heavy aircraft dust reserved for the background overlay, not the plan", "No repair activation or later departure events in this background" ], "numbered_elements": [ { "number": 1, "label": "Main aircraft storage area", "category": "area", "position_hint": "Entire rectangular hangar interior surrounding the central aisle; marker in the northeast corner clearance", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Central viewing aisle", "category": "area", "position_hint": "North-south centerline between the two aircraft columns", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entrance threshold", "category": "area", "position_hint": "Shallow strip immediately inside the south entrance, joining the viewing aisle", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Large warehouse doorway", "category": "opening", "position_hint": "Center of the south perimeter wall", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Front west light aircraft", "category": "prop", "position_hint": "Southwest storage position, west of the aisle, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Middle west light aircraft", "category": "prop", "position_hint": "Middle storage position along the west side, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Rear west light aircraft", "category": "prop", "position_hint": "Northwest storage position, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Front east light aircraft", "category": "prop", "position_hint": "Southeast storage position, east of the aisle, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Middle east light aircraft", "category": "prop", "position_hint": "Middle storage position along the east side, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Rear east light aircraft", "category": "prop", "position_hint": "Northeast storage position, nose facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Heavy accumulated aircraft dust", "category": "prop", "position_hint": "Upper fuselage, wings, and cockpit surfaces of aircraft 5 through 10", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L256B02", "sub_location": "aircraft_storage", "camera_position": "At number 4, just outside number 3, looking north along number 2 between aircraft 5 and 8 toward aircraft 7 and 10.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "24mm wide angle", "framing_notes": "Use the doorway edges and threshold as a foreground frame. Show the close-packed aircraft rows, deep central aisle, and large overhead volume. Preserve thick dust on the stationary, non-operating aircraft through overlay 11. Maintain nighttime conditions without diagnostic graphics, repair activity, exhaust, powered propellers, or later-scene electrical effects. Aircraft markers are persistent storage anchors, not installed furnishings.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Treat the warehouse as a single tall, undivided hangar volume; one storage level with approximately 6–10 m clear height is a conservative typical interpretation for an older light-aircraft hangar, not a height specified by the text. A footprint roughly 30–45 m wide by 35–55 m deep is a typical planning range for the depicted crowded storage arrangement, not a documented measurement. Conventional light aircraft typically span approximately 8–12 m, so preserve aircraft-scale wing clearances and a usable pedestrian aisle rather than shrinking the building to room scale. The text establishes a very large warehouse doorway but not its dimensions or the total facade opening count; the plan includes only that supported entrance, and its six aircraft anchors are a representative arrangement rather than an asserted fleet total.", "applied_shots": [ "S75_Shot5" ], "group_id": "bg_abandoned_airport", "depends_on_fp": [] }, "fp_l257_hangar": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a repurposed former military airfield hangar containing stored light aircraft. Use clean architectural CAD-like geometry, single-weight black outlines, and a white background. This is a persistent spatial reference, not an illustration of an event. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nDraw one large rectangular, undivided hangar with its entrance along the bottom edge. Reflect a utilitarian inherited airfield building in a future post-disaster setting through its broad unobstructed aircraft floor and oversized door opening, not decorative architecture or futuristic equipment. Do not add offices, domestic rooms, mezzanines, or unsupported windows. Place marker 1 just inside the rear perimeter to identify the overall hangar enclosure.\n\nDivide the open floor into functional areas using solid pastel fills without partition walls: a pale-blue aircraft parking strip on the left, marker 2; a pale-cyan aircraft parking strip on the right, marker 3; a pale-yellow central working aisle, marker 4; and a shallow pale-beige entrance threshold across the bottom, marker 5. Keep each fill uniform, without gradients, blending, or drop shadows. The central aisle extends from the threshold toward the rear wall and widens slightly at the middle into an unobstructed working space. Optional area text is limited to the generic labels Storage Zone, Work Zone, and Threshold Zone.\n\nPlace an oversized paired sliding hangar-door assembly across most of the bottom wall, marker 6. Show the opening as a wall gap with simple parallel door-panel rectangles parked along its sides; do not use hinged swing arcs for these sliding panels. Arrange six schematic light-aircraft anchors in two longitudinal rows, three on either side of the aisle. Mark the left row 7, 8, and 9 from entrance to rear, and the right row 10, 11, and 12 from entrance to rear. All noses point toward the entrance. Use simple top-down geometric aircraft glyphs made from a narrow fuselage, transverse wings, and a small tailplane. Keep wings separated from walls and adjacent aircraft, with inner wingtips bordering but not blocking the working aisle. The middle-left aircraft, marker 8, borders the central working space and is accessible from the aisle. These six aircraft are schematic layout anchors rather than a claim about the exact inventory.\n\nShow three projected overhead bulb fixtures as small, unfilled cross-in-circle plan symbols along the central aisle: marker 13 near the entrance, marker 14 over the middle working space, and marker 15 toward the rear. These are fixture-position symbols only, not objects resting on the floor. Do not depict illumination or fixture damage.\n\nEvery numbered base element must have exactly one small circle containing its unique black number, 1 through 15. Keep number circles legible and distinct from fixture symbols. Do not repeat numbers or add object-name labels, legends, dimensions, camera symbols, field-of-view cones, or directional arrows. Do not draw markers 16, 17, or 18. Do not draw smoke, exhaust, flickering effects, broken-bulb traces, loose debris, people, robots, diagnostic graphics, helicopters, or other transient scene content. The diagram must communicate only the stable hangar enclosure, functional zones, aircraft positions, door geometry, and overhead fixture positions.", "key_elements": [ "Single undivided utilitarian hangar with a broad entrance on the south side", "Two aircraft parking rows flanking an unobstructed central working aisle", "Six schematic aircraft anchors with consistent entrance-facing orientation", "Accessible middle-left aircraft beside the central working space", "Oversized paired sliding hangar doors", "Projected overhead bulb positions, separate from their transient electrical state", "Flat pastel functional zones without internal partition walls", "Exhaust, power fluctuation, and ruptured-bulb traces reserved for the background overlay" ], "numbered_elements": [ { "number": 1, "label": "Hangar enclosure", "category": "area", "position_hint": "Entire rectangular interior; marker just inside the north perimeter", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "West aircraft parking zone", "category": "area", "position_hint": "West side of the open hangar floor", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "East aircraft parking zone", "category": "area", "position_hint": "East side of the open hangar floor", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Central working aisle", "category": "area", "position_hint": "North-south central strip, slightly widened beside the middle aircraft", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Entrance threshold", "category": "area", "position_hint": "Shallow strip immediately inside the south entrance", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Large sliding door assembly", "category": "opening", "position_hint": "Broad opening centered on the south wall, with paired lateral sliding panels", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Front west aircraft", "category": "prop", "position_hint": "South end of the west parking row, nose toward the entrance", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Middle west aircraft", "category": "prop", "position_hint": "Middle of the west parking row, inner wing beside the central working space", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Rear west aircraft", "category": "prop", "position_hint": "North end of the west parking row, nose toward the entrance", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Front east aircraft", "category": "prop", "position_hint": "South end of the east parking row, nose toward the entrance", "base_layer_decision": "base_persistent_furniture" }, { "number": 11, "label": "Middle east aircraft", "category": "prop", "position_hint": "Middle of the east parking row, across the aisle from number 8", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "Rear east aircraft", "category": "prop", "position_hint": "North end of the east parking row, nose toward the entrance", "base_layer_decision": "base_persistent_furniture" }, { "number": 13, "label": "Front overhead bulb", "category": "prop", "position_hint": "Suspended above the south portion of the central aisle", "base_layer_decision": "base_persistent_fixture" }, { "number": 14, "label": "Middle overhead bulb", "category": "prop", "position_hint": "Suspended above the central working space", "base_layer_decision": "base_persistent_fixture" }, { "number": 15, "label": "Rear overhead bulb", "category": "prop", "position_hint": "Suspended above the north portion of the central aisle", "base_layer_decision": "base_persistent_fixture" }, { "number": 16, "label": "Restart exhaust spread", "category": "prop", "position_hint": "Black exhaust originating around number 8 and additional aircraft in both rows, spreading into the shared interior", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 17, "label": "Bulb power fluctuation", "category": "prop", "position_hint": "Uneven electrical illumination at the surviving overhead fixtures numbered 13 and 15", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 18, "label": "Ruptured bulb traces", "category": "prop", "position_hint": "Damaged bulb at fixture 14 above the central working space; the mounting position remains unchanged", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L257B03", "sub_location": "hangar", "camera_position": "At number 6, just outside number 5, facing north along number 4 toward the working space between numbers 8 and 11.", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "24–28mm wide angle", "framing_notes": "Frame the doorway edges and threshold as a foreground boundary, with aircraft rows enclosing an open central subject space beside number 8. Keep the rear aircraft readable where not obscured by exhaust and include the overhead fixtures. Depict the nighttime restart state through overlays 16, 17, and 18 without moving the aircraft anchors. Leave characters to the shot layer; do not add diagnostic graphics or the later departure helicopter.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Treat the hangar as a single tall clear-span volume, typical of an inherited small-aircraft airfield hangar; the text does not specify storey count or height, so approximately 6–10 m of interior clearance is a conservative typical range rather than a documented measurement. A footprint approximately 25–40 m wide by 30–50 m deep is a typical layout allowance for multiple light aircraft and a central working aisle, not a stated site dimension. The text establishes very large doors and multiple overhead bulbs but gives no exact opening, aircraft, or fixture counts; the paired entrance, six aircraft positions, and three bulb positions are schematic layout choices, and no windows are asserted. Suspend the bulbs well above aircraft clearance, retain the full tall enclosure in downstream views, and do not introduce unsupported upper floors, stairs, or mezzanines.", "applied_shots": [ "S77_Shot22" ], "group_id": "bg_abandoned_airport", "depends_on_fp": [] }, "fp_boat_deck": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact coastal working boat's exposed deck. This is a simple layout reference, not artwork. Use single-weight black outlines, geometric shapes, and solid pastel fills on an off-white background. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use conventional practical working-vessel geometry appropriate to a future disaster-era coastal setting with retained older equipment; do not add speculative futuristic equipment. Place the bow at the top and stern at the bottom, with port on the left and starboard on the right. Show an elongated hull perimeter with a gently tapered bow. Position a compact enclosed cabin-access block forward and slightly to port, leaving a continuous open starboard passage connected to the broad aft working deck. Show only the cabin block footprint, not its interior or other vessel levels. Put a deck access doorway in its aft-facing wall, opening onto a small threshold. Place a supporting post in the starboard passage, just inboard of the midship starboard deck edge, close enough to permit someone holding the post to reach toward that edge. Keep this post-to-edge space unobstructed. Reserve an empty cargo-stowage area on the aft port side, leaving a clear route from the access doorway to the post and edge. Use pale yellow for the exposed working deck, pale blue for the cabin block, pale beige for the access threshold, pale cyan for the cargo-stowage area, and pale gray for the surrounding exterior water area. Each area has one uniform solid fill with no blending. Draw the access door with a simple door leaf and swing arc; draw the post as a small circular footprint. Draw the deck edge as a simple continuous boundary, without inventing a broken railing or an event-related breach. Draw exactly one small circle with a black number for each of these base elements: 1 exposed working deck, 2 cabin-access block, 3 access threshold, 4 deck access door, 5 supporting post, 6 starboard deck edge beside the post, 7 cargo-stowage area, and 8 surrounding water area. Each number appears exactly once, placed without obscuring its geometry. Do not draw markers 9, 10, or 11. The cargo zone stays empty in this base diagram: loose cargo belongs to a separate state overlay. Do not draw people, rain, waves, floodwater, displaced objects, falling figures, damage cues, movement paths, or rescue-event symbols. No text other than the numbered circles; no dimensions, legend, camera icons, camera arrows, or field-of-view cones.", "key_elements": [ "Forward-port cabin-access block with aft-facing access door and threshold", "Continuous route from cabin access across the working deck to the starboard passage", "Supporting post immediately inboard of the starboard deck edge", "Unobstructed reach corridor between the post and the consistent overboard location", "Aft-port cargo-stowage zone separated from the rescue corridor", "Loose cargo and storm conditions reserved for background overlays" ], "numbered_elements": [ { "number": 1, "label": "Exposed working deck", "category": "area", "position_hint": "Aft deck and continuous starboard passage around the cabin block", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Cabin-access block", "category": "area", "position_hint": "Forward half of the vessel, offset toward port; interior outside this plan's scope", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Access threshold", "category": "area", "position_hint": "Immediately aft of the cabin-access block at its deck doorway", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Deck access door", "category": "opening", "position_hint": "Aft-facing wall of the cabin-access block, connecting to the threshold", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Supporting post", "category": "prop", "position_hint": "Midship starboard passage, just inboard of the deck edge", "base_layer_decision": "base_persistent_fixture" }, { "number": 6, "label": "Starboard deck edge", "category": "area", "position_hint": "Starboard perimeter directly outboard of the supporting post; persistent anchor for the overboard action", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Cargo-stowage area", "category": "area", "position_hint": "Aft port working deck, clear of the threshold-to-post route", "base_layer_decision": "base_structural_unit" }, { "number": 8, "label": "Surrounding water area", "category": "area", "position_hint": "Outside the hull perimeter, especially beyond the starboard deck edge", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Loose heavy cargo", "category": "prop", "position_hint": "Initially associated with the aft-port cargo area; event-dependent displacement belongs only to the shot overlay", "base_layer_decision": "state_overlay_transient_object" }, { "number": 10, "label": "Driving storm rain", "category": "prop", "position_hint": "Across the exposed deck and surrounding exterior", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 11, "label": "Deck-sweeping storm water", "category": "prop", "position_hint": "Across the working deck and the post-to-starboard-edge corridor, continuous with the surrounding sea", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L261B01", "sub_location": "boat_deck", "camera_position": "On the aft working deck near number 7, facing diagonally forward and starboard toward number 5 and number 6, with numbers 2, 3, and 4 toward the left background and number 8 beyond the edge.", "camera_height": "Standing eye level, approximately 1.5-1.7 m above the deck", "lens_hint": "28-35mm wide angle", "framing_notes": "Keep the supporting post and adjacent deck edge prominent and in the same screen positions for both shots. Leave an unobstructed action corridor between them and enough exterior space beyond the edge to stage the overboard action. Reference the cargo zone toward the left foreground, but do not freeze loose cargo into the persistent layout. Apply rain and wave wash as overlays; changes in hand contact, cargo displacement, and individual wave phase remain shot-specific.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "Vessel dimensions and total level count are unspecified; a compact coastal working boat approximately 10-25 m long and 3-6 m wide is a provisional typical scale, not a stated measurement. A single deckhouse level above the working deck, with roughly 2-3 m clearance, is a conservative typical assumption; the crew accommodation is reached from elsewhere aboard, and its exact level and connecting stair arrangement are not established. The supporting post should extend from deck to an overhead support at approximately deckhouse height, with the adjacent deck edge within a plausible arm's reach; these are staging assumptions rather than measured facts. The schematic access doorway does not establish the vessel's total door or window count, and no additional upper storeys, masts, or elevated structures are specified.", "applied_shots": [ "S80_Shot9", "S80_Shot15" ], "group_id": "bg_storm_boat", "depends_on_fp": [] }, "fp_boat_crew_cabin": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact two-person shipboard crew cabin. Use single-weight black outlines, simple geometric shapes, and a white background, like a clean architectural CAD plan. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only solid flat pastel area fills, with no blending or drop shadows. Show a simple rectangular cabin, slightly longer north-to-south than east-to-west. Use an economical working-vessel layout appropriate to a future coastal setting where ordinary older equipment remains in service; do not add speculative technology or decorative regional motifs. Place a long sofa against the west wall, oriented north-to-south, with its seating facing east. Draw the sofa as a long rectangle with cushion divisions. Leave a continuous generous strip of unobstructed floor between the sofa and the east bulkhead, connecting to the entrance. The uninterrupted east bulkhead is the persistent wall toward which occupants can be thrown; draw it intact and unmarked. Put the sliding entrance in the south wall, slightly east of center, with a small interior threshold. Draw this sliding opening with a straight panel and parallel track symbol, not a hinged swing arc. Fill the cabin rest area pale blue, the clear circulation floor pale cyan, and the entrance threshold pale beige; these are adjoining functional zones, not extra partitioned rooms. Do not add beds, windows, storage, tables, plumbing, exterior deck structures, or stairs. Draw exactly six small white circles with black numbers, each appearing exactly once: 1 in the cabin rest area near its north end; 2 within the entrance threshold; 3 beside the sliding entrance panel; 4 centered on the sofa; 5 in the clear central-to-east floor strip; 6 immediately inside the east bulkhead. Use no other text, legend, dimensions, or annotations. Do not draw marker 7: it belongs only to a separate storm-state overlay. Keep the base plan upright and unchanged, without any heel, tilted floor, motion arrows, occupants, displaced objects, impact marks, debris, looting traces, or damage. Camera positions and viewing directions are metadata only and must not appear in the drawing.", "key_elements": [ "Compact enclosed cabin suitable for two occupants, without an invented bunk layout", "South-wall sliding entrance and small interior threshold", "Persistent west-wall sofa facing the open floor", "Continuous floor clearance between the sofa and east bulkhead", "Intact east-side impact bulkhead", "Identical base geometry in quiet and storm states; vessel heel is overlay-only" ], "numbered_elements": [ { "number": 1, "label": "Crew cabin", "category": "area", "position_hint": "whole rectangular enclosure; marker in north-end rest area", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entrance threshold", "category": "area", "position_hint": "inside south wall, slightly east of center", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Sliding entrance", "category": "opening", "position_hint": "south wall adjoining the entrance threshold", "base_layer_decision": "base_opening" }, { "number": 4, "label": "Sofa", "category": "furniture", "position_hint": "against west wall, long axis north-south, facing east", "base_layer_decision": "base_persistent_furniture" }, { "number": 5, "label": "Clear floor", "category": "area", "position_hint": "continuous central-to-east strip between sofa and east bulkhead", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Impact-side bulkhead", "category": "area", "position_hint": "uninterrupted east boundary of cabin", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Severe vessel heel", "category": "area", "position_hint": "whole cabin attitude; clear floor falls toward east bulkhead number 6 during storm impact", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L263B02", "sub_location": "crew_cabin", "camera_position": "near number 2 (entrance threshold), just inside number 3 (sliding entrance), facing north with a slight westward bias toward number 4 (sofa), while retaining number 5 (clear floor) and number 6 (impact-side bulkhead)", "camera_height": "eye-level seated, approximately 1.2m", "lens_hint": "28mm wide angle", "framing_notes": "Keep the sofa prominent and the opposite bulkhead readable across the clear floor. Use the same level composition for conversation and waking; initial vibration causes no visible damage. The entrance may remain behind the camera.", "use_numbered_elements": [ 1, 4, 5, 6 ], "ignore_numbered_elements": [ 7 ] }, { "bg_id": "L263B01", "sub_location": "crew_cabin", "camera_position": "near number 2 (entrance threshold), just inside number 3 (sliding entrance), facing north across number 5 (clear floor), with number 4 (sofa) on the left and number 6 (impact-side bulkhead) on the right", "camera_height": "eye-level seated, approximately 1.2m relative to the cabin floor", "lens_hint": "28mm wide angle", "framing_notes": "Apply number 7 only in the background state: roll the cabin relative to the image frame so the floor falls toward number 6 on screen right. Keep sofa, entrance, floor, and bulkheads in their established relative positions. Preserve a clear route toward the impact-side wall; add no damage, looting traces, or displaced furnishings. The entrance may remain behind the camera.", "use_numbered_elements": [ 1, 4, 5, 6, 7 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The plan covers one enclosed cabin on a vessel, not the entire ship; the text does not specify the vessel's total deck count or overall height. A footprint roughly 2.5–3.5m across by 3–4m long, with approximately 2–2.4m clear headroom, is a typical compact working-vessel cabin range rather than a stated measurement. The scene supports a small space suitable for two occupants, a sofa, and one described entrance; additional openings are unspecified and are not introduced here. The later ascent to the exposed deck establishes upward access elsewhere, but its height and stair arrangement are unspecified and outside this plan.", "applied_shots": [ "S79_Shot10", "S79_Shot12", "S79_Shot14" ], "group_id": "bg_storm_boat", "depends_on_fp": [] }, "fp_l266_shelter_room": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a compact institutional shelter bedroom with an adjacent changing alcove, shower compartment, and entry threshold. Use simple contemporary institutional layout conventions appropriate to a maintained future coastal research facility: a raised single bed, practical circulation, a conventional physical call monitor, and a compact separated wet area. This is a clean CAD-like reference diagram, not artwork. Use single-weight black outlines, geometric symbols, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nOrient the sea-facing exterior wall toward the top of the page; this is a diagram orientation, not an asserted geographic bearing. Use a simple rectangular overall footprint. The bedroom occupies the upper portion and most of the western side, filled solid pale blue. Place the entry threshold in the southwest corner, filled solid pale beige. Place a compact changing alcove along the south side immediately east of the threshold, filled solid pale lavender. Place the enclosed shower compartment in the southeast corner, filled solid pale cyan. Keep each zone fill uniform, without blending. Leave a generous clear central route from the entry to the bedside, call station, changing alcove, and shower. Do not add a kitchen, dining area, laboratory, remote caller's room, or surrounding research complex.\n\nDraw the entrance in the lower part of the west wall as a hinged door with a swing arc. Draw a broad sea-facing window in the north wall as double parallel lines within the wall opening. The sea is beyond this window, not an additional room or illustrated landscape. Position a single bed in the northwest part of the bedroom, its long axis north-south and pillow at the north end, using a plain rectangle and smaller pillow rectangle. Keep the window and bedside circulation unobstructed. Mount the call monitor against the east wall in the northern half of the bedroom, facing west toward the bed and clear standing space. Draw it as a narrow rectangular plan symbol; place a small fixed call-switch symbol and a docked telephone symbol immediately beside it. Leave its screen blank: video-call content is a separate screen insert and must never become additional physical space. Represent the fluorescent ceiling fixture by a simple unfilled rectangular footprint above the central bedroom circulation, with no glow or illumination effects. Separate the changing alcove from the bedroom with a short partition and an open access gap. Give the shower its own hinged door opening directly from the bedroom on the shower's north partition. Draw a minimal wall-mounted shower assembly symbol inside the compartment. Do not add unsupported wardrobes, toilets, sinks, chairs, or decorative furniture.\n\nPlace exactly one small circle with a black number for each of these persistent elements: 1 bedroom area, 2 entry threshold, 3 changing alcove, 4 shower compartment, 5 entrance door, 6 sea-facing window, 7 changing access opening, 8 shower door, 9 single bed, 10 fixed call monitor, 11 call switch, 12 docked telephone, 13 shower assembly, 14 fluorescent ceiling fixture footprint. Place area numbers in clear floor space and object numbers beside their respective symbols without overlap. Each number must appear exactly once. No text labels, dimensions, legends, camera symbols, field-of-view cones, camera arrows, people, screen portraits, event cues, or loose clothing. All numbering is part of the base reference layer only.", "key_elements": [ "Compact maintained institutional bedroom with a raised single bed and unobstructed bedside circulation", "Broad sea-facing window on the north diagram wall", "Persistent wall-mounted call station with monitor, switch, and docked telephone", "Video-call imagery confined to the monitor insert, never expanded into another room", "Separate changing alcove and enclosed shower compartment along the south side", "Southwest entry threshold connected to the central circulation route", "Fluorescent fixture position recorded symbolically without lighting effects", "Distinct solid pastel zone fills and unique numbered base markers" ], "numbered_elements": [ { "number": 1, "label": "Bedroom", "category": "area", "position_hint": "Upper and western portions of the unit, with open central circulation", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Entry threshold", "category": "area", "position_hint": "Southwest corner immediately inside the entrance", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Changing alcove", "category": "area", "position_hint": "South side between the entry threshold and shower compartment", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Shower compartment", "category": "area", "position_hint": "Enclosed southeast corner", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Entrance door", "category": "opening", "position_hint": "West wall near the southwest corner, opening into the threshold", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Sea-facing window", "category": "opening", "position_hint": "North exterior wall, centered with clearance from the bed", "base_layer_decision": "base_opening" }, { "number": 7, "label": "Changing access", "category": "opening", "position_hint": "Gap in the north partition of the south-side changing alcove", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Shower door", "category": "opening", "position_hint": "North partition of the southeast shower compartment", "base_layer_decision": "base_opening" }, { "number": 9, "label": "Single bed", "category": "furniture", "position_hint": "Northwest bedroom, head toward the north wall, clear aisle on the east side", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Call monitor", "category": "prop", "position_hint": "East bedroom wall north of the shower compartment, screen facing west", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Call switch", "category": "prop", "position_hint": "East wall immediately beside the call monitor at accessible operating height", "base_layer_decision": "base_persistent_fixture" }, { "number": 12, "label": "Docked telephone", "category": "prop", "position_hint": "Fixed dock beside the call monitor and switch on the east wall", "base_layer_decision": "base_persistent_fixture" }, { "number": 13, "label": "Shower assembly", "category": "prop", "position_hint": "East interior wall of the shower compartment", "base_layer_decision": "base_persistent_fixture" }, { "number": 14, "label": "Fluorescent fixture", "category": "prop", "position_hint": "Ceiling above the central bedroom circulation east of the bed", "base_layer_decision": "base_persistent_fixture" } ], "camera_recommendations": [ { "bg_id": "L266B02", "sub_location": "shelter_room", "camera_position": "Just inside number 2 (entry threshold), near number 5 (entrance door), facing diagonally northeast across number 9 (single bed) toward number 6 (sea-facing window) and number 10 (call monitor).", "camera_height": "Eye-level standing, approximately 1.6 m", "lens_hint": "28mm wide angle with restrained perspective distortion", "framing_notes": "Use one consistent room view across all assigned shots. Keep the white bed at left, the sea window beyond it, and the physical call monitor readable at right. Retain the changing access and shower door near the lower-right edge where possible; their interiors need not be visible. Preserve the quiet white institutional room and fluorescent illumination in downstream backgrounds, with an emerald sea visible only through the window. Video-call faces belong exclusively inside the monitor insert; screen activation and shutdown do not alter the room layout.", "use_numbered_elements": [ 1, 2, 5, 6, 7, 8, 9, 10, 11, 12, 14 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This plan describes one occupied level within a larger research-and-shelter facility; the bedroom's floor level, the building's total storey count, and its overall height are not specified. A roughly 4–6 m by 5–7 m room suite with a 2.6–3.2 m clear ceiling is a typical conservative planning range for a compact contemporary institutional bedroom with changing and shower facilities, not a measured fact from the scenes. The text establishes a sea-view window and bedroom entry but not complete facade opening counts; do not extrapolate the schematic openings into a repeated multi-storey facade. Keep the bed conventionally raised, the monitor and call controls within standing reach, and the fluorescent fixture at ceiling level; no internal stairs or level changes are established.", "applied_shots": [ "S81_Shot5", "S83_Shot5", "S83_Shot6", "S83_Shot7" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] }, "fp_l268_main_center": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan, resembling a simple architectural CAD room-layout drawing. Use single-weight black outlines, geometric shapes only, and a white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering.\n\nShow one mapped interior level of a large advanced research facility in a future post-disaster island setting. Convey its institutional layout through controlled access, generous circulation, conventional computer workstations, integrated indoor planting, and a connected enclosed testing laboratory. Keep the maintained research environment intact. Do not introduce traditional decorative architecture, an actual power reactor, or speculative holographic equipment. The relative placement is a schematic continuity arrangement, not a surveyed plan.\n\nArrange a broad rectangular footprint with the main research hall occupying the western half and the connected laboratory occupying the eastern half. A short entrance threshold projects from the southwest edge. Separate hall and laboratory with a straight partition containing a wide automatic sliding doorway at its southern end. Keep an unobstructed route from the entrance through the hall and laboratory doorway to the testing enclosure. In the eastern laboratory, place a large circular glazed testing enclosure centrally, leaving a generous surrounding control and observation aisle. Its access opening faces southwest toward the connecting doorway. Use paired black curved lines for the glazed enclosure, with a clear break and sliding leaves at its entrance; do not imply opaque walls or actual transparency effects.\n\nApply one uniform solid pastel fill per distinct area: entrance threshold pale beige, main hall pale yellow, laboratory control area pale cyan, circular testing enclosure pale blue, and two inset planting beds pale green. Do not blend colors. The circular enclosure's blue fill replaces the surrounding laboratory fill within its boundary. Furniture glyphs may remain white for clarity. Indicate tropical planting and flowers only through a few simple geometric plant symbols confined to the planter footprints.\n\nPlace the following small numbered circles, with black numerals, exactly once each: 1 in the southwest entrance threshold; 2 beside the controlled sliding entrance between threshold and hall; 3 beside a small wall-mounted access reader next to that entrance; 4 in clear floor space of the main hall; 5 in a long northwestern planting bed; 6 in a shorter southwestern planting bed, clear of circulation; 7 on a continuous computer console bank against the hall's north wall, east of planting bed 5; 8 on a rectangular fixed research equipment island in the hall's west-central portion; 9 beside the wide automatic doorway connecting hall and laboratory; 10 in the laboratory's southern control aisle; 11 just inside the northern edge of the circular glazed enclosure, identifying the entire enclosure and its boundary; 12 beside the enclosure's southwest sliding access; 13 beside its wall-mounted door switch; 14 on the central north-south testing bed, drawn as a rectangle with a small head-pad rectangle at its north end; 15 on a fixed scanning arm pedestal west of the bed; 16 on a second fixed scanning arm pedestal east of the bed; 17 on a continuous console bank outside the enclosure along the laboratory's north wall; 18 on a continuous console bank along the east wall; 19 on a continuous console bank along the south wall; 20 on a small fixed intercom microphone fixture at the western end of console bank 19; 21 beside a fixed intercom speaker on the enclosure's southeast boundary. Console banks are single continuous built-in units with small integrated blank monitor rectangles, not collections of separately numbered desks. Scanning arms are simple circles and articulated line segments in a neutral parked configuration, without motion marks.\n\nDraw only base-layer markers 1 through 21. Do not draw markers 22 or 23, smoke, warning messages, active graphs, temporary cables, restraints, occupants, robots, loose event objects, damage, or action cues. Do not add the separate shelter, dining room, director's office, rooftop, or later memorial setting to this footprint. No exterior windows are established for this particular mapped interior, so do not invent a facade window rhythm. All openings use simple top-down sliding-door glyphs; any glazed straight partition uses paired parallel lines. Optional large area text is limited to 'Threshold Zone', 'Shared Zone', 'Control Zone', and 'Testing Zone'. Apart from those optional zone names and numbered circles, include no text, legends, dimensions, annotations, camera symbols, field-of-view cones, or arrows.", "key_elements": [ "Controlled southwest entrance leading into a large planted research hall.", "Separate eastern laboratory connected directly to the main hall by an automatic doorway.", "Circular glazed testing enclosure with an accessible southwest sliding entrance.", "Central testing bed with fixed scanning equipment on both sides.", "Peripheral computer console banks with clear observation and circulation space.", "Persistent tropical planting beds integrated into the maintained research environment.", "Smoke and failure-screen content belong only to conditional shot overlays, never to the base plan.", "Dining dialogue close-ups do not establish a dining room within this research-center footprint." ], "numbered_elements": [ { "number": 1, "label": "Entrance threshold", "category": "area", "position_hint": "southwest projection of the main hall", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Controlled entrance", "category": "opening", "position_hint": "between the southwest threshold and main hall", "base_layer_decision": "base_opening" }, { "number": 3, "label": "Access card reader", "category": "prop", "position_hint": "wall immediately beside entrance 2", "base_layer_decision": "base_persistent_fixture" }, { "number": 4, "label": "Main research hall", "category": "area", "position_hint": "western half of the mapped interior", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "North planting bed", "category": "furniture", "position_hint": "northwestern perimeter of the main hall", "base_layer_decision": "base_persistent_fixture" }, { "number": 6, "label": "South planting bed", "category": "furniture", "position_hint": "southwestern main hall, clear of entrance circulation", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Hall console bank", "category": "furniture", "position_hint": "north wall of the main hall, east of planting bed 5", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "Research equipment island", "category": "furniture", "position_hint": "west-central main hall, outside the through-route", "base_layer_decision": "base_persistent_fixture" }, { "number": 9, "label": "Laboratory connecting door", "category": "opening", "position_hint": "southern end of the partition between hall and laboratory", "base_layer_decision": "base_opening" }, { "number": 10, "label": "Laboratory control area", "category": "area", "position_hint": "eastern room surrounding the circular testing enclosure", "base_layer_decision": "base_structural_unit" }, { "number": 11, "label": "Circular glazed testing enclosure", "category": "area", "position_hint": "center of the eastern laboratory, including its glazed boundary", "base_layer_decision": "base_structural_unit" }, { "number": 12, "label": "Glazed enclosure entrance", "category": "opening", "position_hint": "southwest arc of enclosure 11, facing connecting door 9", "base_layer_decision": "base_opening" }, { "number": 13, "label": "Enclosure door switch", "category": "prop", "position_hint": "fixed jamb beside enclosure entrance 12", "base_layer_decision": "base_persistent_fixture" }, { "number": 14, "label": "Stainless testing bed", "category": "furniture", "position_hint": "center of enclosure 11, long axis north-south", "base_layer_decision": "base_persistent_furniture" }, { "number": 15, "label": "West scanning arm", "category": "prop", "position_hint": "fixed pedestal west of testing bed 14", "base_layer_decision": "base_persistent_fixture" }, { "number": 16, "label": "East scanning arm", "category": "prop", "position_hint": "fixed pedestal east of testing bed 14", "base_layer_decision": "base_persistent_fixture" }, { "number": 17, "label": "North laboratory console bank", "category": "furniture", "position_hint": "laboratory north wall outside enclosure 11", "base_layer_decision": "base_persistent_fixture" }, { "number": 18, "label": "East laboratory console bank", "category": "furniture", "position_hint": "laboratory east wall outside enclosure 11", "base_layer_decision": "base_persistent_fixture" }, { "number": 19, "label": "South laboratory console bank", "category": "furniture", "position_hint": "laboratory south wall outside enclosure 11", "base_layer_decision": "base_persistent_fixture" }, { "number": 20, "label": "Control intercom microphone", "category": "prop", "position_hint": "western end of south console bank 19", "base_layer_decision": "base_persistent_fixture" }, { "number": 21, "label": "Testing intercom speaker", "category": "prop", "position_hint": "southeast boundary of enclosure 11", "base_layer_decision": "base_persistent_fixture" }, { "number": 22, "label": "Failed test ring smoke", "category": "prop", "position_hint": "at the temporary test subject's chest ring above bed 14; failure moment only", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 23, "label": "Failure screen message", "category": "prop", "position_hint": "on an integrated monitor of south console bank 19; ERROR content during failure only", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L268B01", "sub_location": "main_research_center", "camera_position": "Near number 9 on the main-hall side of the open connecting doorway, facing northeast through number 12 toward number 14 inside number 11; keep the planted hall edge to the left.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "28–35mm wide-angle equivalent; retain the same camera axis for tighter crops", "framing_notes": "Prioritize enclosure 11, bed 14, scanning fixtures 15 and 16, and surrounding consoles. Include planting bed 5 and hall console 7 at the left edge where the doorway permits. The applicability list includes conditional overlays 22 and 23 because this background serves the failed experiment; activate them only in explicitly identified failure shots, never throughout the shared background. Shot numbers alone do not establish the exact failure interval. For assigned dining-dialogue close-ups, restrict the background to a tight, non-identifying crop; do not show the testing enclosure behind a dining conversation or invent a dining room inside this plan. No camera metadata appears on the diagram.", "use_numbered_elements": [ 4, 5, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The text establishes a monumental research interior and an accessible rooftop elsewhere in the facility, but does not establish the building's total storey count; this plan maps one interior level, not a verified single-storey building. A clear hall height of roughly 6–10 m is a typical conceptual range for a large advanced research hall, not a stated measurement. A combined hall-and-laboratory footprint roughly 25–45 m long by 18–30 m wide is a typical planning range for this interpretation; preserve generous circulation and workspace for approximately ten researchers rather than treating the laboratory as a domestic room. The controlled entrance, connecting automatic laboratory door, and operable glazed enclosure entrance are text-supported opening types, but facade window counts and their distribution across storeys are unspecified. The circular glazing must rise above standing occupants and the bed must accommodate a bulky robot with scanning clearance; the two scanning pedestals are a schematic allocation rather than a source-specified equipment count, and rooftop access geometry lies outside this plan.", "applied_shots": [ "S82_Shot14", "S82_Shot17", "S82_Shot26", "S85_Shot11", "S85_Shot22", "S85_Shot23" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] }, "fp_l269_observation_lab": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of an advanced institutional laboratory and its observation-side circulation. Use single-weight black outlines, geometric shapes, and solid pastel area fills on an off-white background, like a clean architectural CAD plan. Strictly forbid 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. This is a persistent layout reference, not an illustrated scene.\n\nUse a roughly square outer room. Center a large circular glass enclosure, leaving generous circulation around it and equipment access on both sides of its central examination bed. The spatial organization should suit a maintained future research institution: automated access, conventional computer workstations, centralized robotic examination, and a separate observer route. Do not add ornamental cultural motifs, holographic interfaces, or generalized ruin.\n\nFill the circular examination area pale cyan, the surrounding observation and circulation area pale yellow, a continuous U-shaped perimeter service zone along the west, north, and east sides pale blue, and a short south entrance threshold pale beige. Each area has exactly one flat solid color; no blending or color changes for nighttime or alarm conditions. Area divisions without walls are indicated by fill boundaries, not invented partitions. Optional area text is limited to Service Zone, Shared Zone, and Threshold Zone.\n\nDraw these persistent features and place each associated black number inside one small white circle, exactly once: 1, the circular examination enclosure and its glass boundary, represented by two closely spaced circular outlines interrupted at its south access opening; 2, the surrounding observation circulation, with its marker in the broad southern viewing aisle; 3, the continuous U-shaped perimeter service zone, with its marker in the northwest corner; 4, the south entrance threshold; 5, an automatic sliding glass access door at the enclosure's south point, shown as parallel offset panel lines; 6, a small wall switch immediately inside and east of that glass access door; 7, an automatic sliding laboratory entrance centered in the outer south wall, aligned with the enclosure access; 8, the central steel examination bed, oriented north-south with its head north, drawn as a plain rectangle with a small head-pad rectangle; 9 and 10, separate fixed robotic arm assemblies west and east of the bed, each drawn as a circular mounting base and simple jointed line segments, contained within the enclosure; 11 and 12, integrated computer workstation banks along the outer west and east walls, each drawn as one long rectangle with approximately five console subdivisions and simple monitor-footprint rectangles; 13, a researcher workbench with integrated drawers centered against the north wall; 14, a compact observation intercom and speaker fixture just outside the enclosure's southeast edge, facing the viewing aisle; 15, a persistent bedside chair southwest of the bed inside the enclosure, outside the access route; 16, a fixed cable connection terminal immediately north of the bed; 17, the bed's integrated restraint mounting and locking hardware, represented by small rail-mounted rectangles with one marker for the complete assembly; 18, a fixed alarm sounder and beacon footprint on the outer east wall near its southeast corner.\n\nKeep the path from the outer entrance through the observation aisle to the glass access door unobstructed. Preserve working space between the bed, robotic arm bases, and glass boundary. Workstations face inward toward the enclosure. Treat console subdivisions and drawer lines as details of their numbered integrated furniture units, not separate freestanding objects. These relative positions are a coherent planning arrangement where the source does not specify exact orientation.\n\nDraw only markers 1 through 18. Do not draw markers 19 through 21 or their transient contents: attached loose leads, deployed restraint straps, or active alarm illumination. Do not draw people, robots undergoing examination, loose stands, weapons, detached parts, damage, smoke, screen messages, or event cues. Do not bring an adjacent office's piano or columns into this laboratory. Do not add exterior windows, a roof plan, stairs, or other rooms. No text except the optional generic area names and the numbered circles. No dimensions, legend, camera icons, view cones, camera arrows, elevations, or height annotations.", "key_elements": [ "Central circular glass examination enclosure with south automatic access and an interior wall switch", "North-south steel examination bed with persistent restraint hardware and a fixed cable terminal", "Two fixed robotic arm assemblies flanking the bed with clear service access", "Inward-facing computer workstation banks and a north researcher workbench with drawers", "Continuous observation circulation connecting the main entrance, glass access, and intercom", "Flat pastel zoning independent of night, morning, and alarm states", "Transient leads, deployed restraints, and alarm activation reserved for background overlays", "Adjacent office furnishings and later combat destruction excluded" ], "numbered_elements": [ { "number": 1, "label": "Glass examination enclosure", "category": "area", "position_hint": "central circular area, including its enclosing glass boundary", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Observation circulation", "category": "area", "position_hint": "continuous aisle around the enclosure, broadest on the south side", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Perimeter service zone", "category": "area", "position_hint": "continuous U-shaped zone along the west, north, and east outer walls", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Entrance threshold", "category": "area", "position_hint": "south center, immediately inside the outer laboratory entrance", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Glass access door", "category": "opening", "position_hint": "south point of the circular enclosure, aligned with the bed foot", "base_layer_decision": "base_opening" }, { "number": 6, "label": "Glass door switch", "category": "prop", "position_hint": "inside the enclosure, immediately east of number 5", "base_layer_decision": "base_persistent_fixture" }, { "number": 7, "label": "Laboratory entrance", "category": "opening", "position_hint": "center of outer south wall, opening toward the adjoining research center", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Steel examination bed", "category": "furniture", "position_hint": "center of the circular enclosure, long axis north-south and head north", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "West robotic arm", "category": "prop", "position_hint": "inside the enclosure, west of the bed's middle section", "base_layer_decision": "base_persistent_fixture" }, { "number": 10, "label": "East robotic arm", "category": "prop", "position_hint": "inside the enclosure, east of the bed's middle section", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "West console bank", "category": "furniture", "position_hint": "west perimeter service zone, facing east toward the enclosure", "base_layer_decision": "base_persistent_furniture" }, { "number": 12, "label": "East console bank", "category": "furniture", "position_hint": "east perimeter service zone, facing west toward the enclosure", "base_layer_decision": "base_persistent_furniture" }, { "number": 13, "label": "Research workbench", "category": "furniture", "position_hint": "north wall between the console banks, with integrated drawer storage", "base_layer_decision": "base_persistent_furniture" }, { "number": 14, "label": "Observation intercom", "category": "prop", "position_hint": "outside the southeast glass boundary, beside the observation aisle", "base_layer_decision": "base_persistent_fixture" }, { "number": 15, "label": "Bedside chair", "category": "furniture", "position_hint": "inside the enclosure southwest of the bed, clear of the south access path", "base_layer_decision": "base_persistent_furniture" }, { "number": 16, "label": "Cable connection terminal", "category": "prop", "position_hint": "inside the enclosure immediately north of the bed head", "base_layer_decision": "base_persistent_fixture" }, { "number": 17, "label": "Restraint locking hardware", "category": "prop", "position_hint": "integrated into the examination bed's side rails", "base_layer_decision": "base_persistent_fixture" }, { "number": 18, "label": "Alarm fixture", "category": "prop", "position_hint": "outer east wall near the southeast observation aisle", "base_layer_decision": "base_persistent_fixture" }, { "number": 19, "label": "Attached examination leads", "category": "prop", "position_hint": "temporary connections between number 16 and the examination subject at number 8", "base_layer_decision": "state_overlay_transient_object" }, { "number": 20, "label": "Deployed restraint straps", "category": "prop", "position_hint": "across the examination position on number 8, attached to number 17; hand release varies by shot", "base_layer_decision": "state_overlay_transient_object" }, { "number": 21, "label": "Active red alarm", "category": "prop", "position_hint": "activation at number 18 with intermittent red illumination across the laboratory", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L269B03", "sub_location": "laboratory_observation_area", "camera_position": "In number 2 just southeast of number 5, looking north-northwest through number 1 toward number 8 and number 16, with number 14 near the right foreground edge.", "camera_height": "eye-level standing approximately 1.5 m", "lens_hint": "40mm moderate wide angle", "framing_notes": "Use a quiet nighttime laboratory plate with restrained blue working illumination. Emphasize numbers 1, 8, 16, and attached leads 19; preserve the fixed robotic equipment and perimeter workstations. The reunion close-ups take place in a separately connected office: keep their background tightly limited and non-identifying rather than treating this laboratory plate as proof of office geography. Do not import a piano or office columns, and do not relocate the reunion into the enclosure.", "use_numbered_elements": [ 1, 2, 3, 5, 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19 ], "ignore_numbered_elements": [ 20, 21 ] }, { "bg_id": "L269B01", "sub_location": "laboratory_observation_area", "camera_position": "In number 2 southwest of number 5, looking diagonally northeast through number 1 toward number 8, number 10, and number 12, with number 14 and number 18 toward the right background.", "camera_height": "eye-level standing approximately 1.6 m", "lens_hint": "35mm wide angle", "framing_notes": "Morning preparation state under blue task lights. Keep the examination bed, substantial deployed restraints, locking hardware, observation glass, researcher workbench, and intercom legible. Number 20 describes the restraint setup, not permanently locked hands: hand release during the farewell is shot-specific continuity, with no layout change. Keep equipment intact and exclude active red warning illumination.", "use_numbered_elements": [ 1, 2, 3, 5, 6, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20 ], "ignore_numbered_elements": [ 21 ] }, { "bg_id": "L269B02", "sub_location": "laboratory_observation_area", "camera_position": "In number 2 southwest of number 5, looking diagonally northeast through number 1 toward number 8, number 10, and number 12, matching the morning preparation view with number 18 at the right background.", "camera_height": "eye-level standing approximately 1.6 m", "lens_hint": "35mm wide angle", "framing_notes": "Match the preceding morning geometry and equipment arrangement. Activate number 21 as intermittent red alarm illumination over the existing blue task lighting and glass reflections in the downstream background only. Preserve the farewell's hand-release continuity; do not reset all restraints to a fully locked state. No combat damage, broken glass, fallen equipment, or drone wreckage has entered this laboratory yet.", "use_numbered_elements": [ 1, 2, 3, 5, 6, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 ], "ignore_numbered_elements": [] } ], "scale_guideline": "This plan maps one laboratory level, not the whole research complex; the total building storey count is unspecified, while later scenes establish an accessible roof above the occupied interior without locating its access within this room. A clear laboratory height of roughly 3–5 m and an overall room footprint around 12–18 m across are conservative typical planning ranges for this equipment-intensive institutional space, not source measurements. An enclosure roughly 6–8 m across is a typical planning allowance for a bed supporting a bulky adult-scale robot, articulated equipment, and standing attendants; its glass boundary should rise above standing eye level rather than read as a low railing. The text establishes an automatic laboratory entrance and a separate automatic enclosure access, but supplies no exterior facade window count, exact glass height, or basis for adding stairs, tanks, or further storeys to this diagram.", "applied_shots": [ "S84_Shot1", "S84_Shot11", "S84_Shot14", "S88_Shot7", "S88_Shot24", "S88_Shot29" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] }, "fp_l270_director_suite": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a maintained modern research director suite. Use single-weight black outlines, simple geometric symbols, and a white background. This is a clean CAD-like layout reference, not artwork. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Use only flat solid pastel area fills, without blending or drop shadows.\n\nDraw one rectangular suite connected through its south wall to the main research center, which remains outside the drawing scope. Organize the interior into three adjoining zones without internal dividing walls: a large pale-yellow central shared hall, a pale-blue private work zone across the northern portion, and a shallow pale-beige threshold zone along the south edge. This is a contemporary institutional office layout retained in a future research facility: conventional desk furniture, generous circulation, structural columns, and an older acoustic piano coexist without invented futuristic equipment or traditional decorative motifs.\n\nPlace marker 1 in clear floor space in the central shared hall, marker 2 in clear floor space in the northern work zone, and marker 3 in the southern threshold zone. Place a hinged entry door at the center of the south wall, opening inward with its swing clear of the circulation route; marker 4 identifies this door. Show the door as a straight leaf and swing arc. Place a rectangular director desk in the northeast portion, its long edge running east-west and its visitor side facing south; marker 5 identifies it. Place a simple office-chair glyph immediately north of the desk, facing south, with marker 6. On the northwest corner of the desktop, place a small narrow rectangular family-photo frame footprint with marker 7; do not draw portraits or any text within it.\n\nPlace the acoustic piano within the central hall, slightly west of the room center, leaving a clear, direct diagonal route from the entry to the visitor side of the desk. Use a simple rectangular piano footprint with a narrow keyboard strip on its south side and marker 8. Place a small rectangular piano bench south of the keyboard with marker 9. Indicate the piano's identity through its plan symbol only, without wear textures. Place a substantial square column west-southwest of the piano with marker 10, offset from the doorway so a person could stand behind it relative to the piano. Place a second square column east of the central hall with marker 11, keeping it outside the direct entry-to-desk route. Leave comfortable passage around the piano, bench, and columns.\n\nEvery marker is a small white circle containing its unique black number. Draw numbers 1 through 11 exactly once each, at their corresponding areas or objects. The only optional words inside the diagram are Shared Zone, Private Zone, and Threshold Zone. Do not add furniture labels, a legend, dimensions, coordinate labels, camera symbols, viewing cones, movement arrows, or other annotations. Do not add windows or other doors unsupported by this suite's description. Do not depict people, robots, confrontation cues, displaced furniture, damage, trails, nighttime darkness, laboratory equipment, or events from neighboring rooms. Keep the entire suite orderly and unchanged.", "key_elements": [ "Single open-plan director suite with shared hall, private work zone, and entry threshold", "South-wall entry connected to the research center", "Unobstructed diagonal approach from the entry to the desk", "North-east director desk with chair and persistent tabletop family-photo frame", "Central acoustic piano and bench, offset west to preserve circulation", "Two fixed columns, including a concealment-capable column near the piano", "Maintained, undamaged layout with no transient event overlays" ], "numbered_elements": [ { "number": 1, "label": "Central hall", "category": "area", "position_hint": "central shared zone, between the threshold and northern work zone", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Director work zone", "category": "area", "position_hint": "northern portion of the suite, open to the central hall", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Entry threshold", "category": "area", "position_hint": "shallow southern interior strip beside the entry", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Research center entry", "category": "opening", "position_hint": "center of south wall, opening inward toward the central hall", "base_layer_decision": "base_opening" }, { "number": 5, "label": "Director desk", "category": "furniture", "position_hint": "northeast work zone, long edge east-west, visitor side facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 6, "label": "Director chair", "category": "furniture", "position_hint": "immediately north of the desk, facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Family photo frame", "category": "prop", "position_hint": "northwest corner of the desktop, retained as a persistent tabletop display", "base_layer_decision": "base_persistent_furniture" }, { "number": 8, "label": "Acoustic piano", "category": "furniture", "position_hint": "central hall, slightly west of center, keyboard facing south", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Piano bench", "category": "furniture", "position_hint": "immediately south of the piano keyboard", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "West column", "category": "area", "position_hint": "west-southwest of the piano, clear of the entry route", "base_layer_decision": "base_structural_unit" }, { "number": 11, "label": "East column", "category": "area", "position_hint": "eastern side of the central hall, outside the direct entry-to-desk route", "base_layer_decision": "base_structural_unit" } ], "camera_recommendations": [ { "bg_id": "L270B01", "sub_location": "director_suite", "camera_position": "At the southwest edge of number 3 (entry threshold), west of number 4 (entry), facing northeast across number 1 (central hall) toward number 5 (desk); remain south of number 10 (west column).", "camera_height": "Standing eye-level, approximately 1.6 m", "lens_hint": "24mm wide angle", "framing_notes": "Use one stable wide composition for both shots. Keep number 4 at the near right edge, numbers 8 and 9 in the left middle ground, and numbers 5, 6, and 7 in the rear right. Retain numbers 10 and 11 as spatial anchors without blocking the entry-to-desk approach. Nighttime belongs to the downstream background treatment, not the plan. Keep the room orderly and undamaged; the photo remains confined to its frame.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ], "ignore_numbered_elements": [] } ], "scale_guideline": "The plan covers a single occupied suite level within a larger research facility; the building's total storey count and overall height are unspecified, and its separately described accessible roof is outside this plan. A footprint roughly 8–12 m across by 7–10 m deep and a ceiling height around 3–4 m are typical planning ranges for a generous modern institutional director suite, not stated measurements. The columns extend from the suite floor to the ceiling, and circulation should comfortably accommodate a bulky adult-scale robot rather than a child-sized body. An entry connecting the suite to the research center is supported, but total door counts, window counts, and facade opening patterns are unspecified.", "applied_shots": [ "S86_Shot2", "S86_Shot5" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] }, "fp_l278_roof_antenna_deck": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a research-facility rooftop garden and antenna deck. Use a clean architectural CAD-plan appearance: single-weight black outlines, simple geometric shapes, white background, and solid flat pastel area fills. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. Derive the layout from a future coastal research institution with an accessible landscaped flat roof, utilitarian roof access, communications equipment, and a broad clear surface capable of helicopter touchdown. Do not add ornamental architecture or speculative futuristic decorations. North is at the top. Draw a broad rectangular roof boundary with a narrow continuous parapet band. Fill the general circulation deck pale gray. Place a large pale-green lawn across the western and central roof, leaving circulation around it. Place a pale-cyan rectangular equipment pad at the north-center edge of the lawn. On this pad, show the large antenna's foundation and plan footprint as concentric geometric outlines, with a separate compact omnidirectional speaker assembly immediately east of it, represented by a central square and outward-facing trapezoidal speaker symbols. These symbols represent an all-direction array, not a specified speaker count. Keep the antenna and speaker footprints distinct. Place a compact pale-blue roof-access enclosure at the southwest corner. Its east wall contains a hinged door shown with a leaf and swing arc, opening onto a pale-beige access path that runs eastward along the lawn's southern edge and connects to the general deck. Reserve a large pale-yellow rectangular open touchdown surface on the eastern side, clearly separated from the antenna and speakers, with generous unobstructed clearance. This is an available roof surface, not evidence of a dedicated marked helipad: draw no H, landing lettering, or aircraft. Fill the parapet band pale lavender. Use each area's color consistently, with no blending. Draw small circles containing black numbers exactly once each: 1 in the general deck circulation area; 2 inside the lawn; 3 inside the equipment pad away from its fixtures; 4 on the antenna footprint; 5 beside the speaker assembly; 6 inside the roof-access enclosure; 7 beside its door; 8 on the access path; 9 inside the touchdown surface; and 10 on the north parapet band. Draw only markers 1 through 10. Do not draw markers 11 through 16 or any associated event content. No people, robots, helicopters, battle damage, bullet impacts, scorch marks, debris, energy beams, or whiteout effects belong in this base diagram. No furniture is required. No elevations, storey depictions, dimensions, legends, camera symbols, view cones, or camera arrows. Optional short generic area labels and a small N with north arrow are the only text allowed besides the numbered circles.", "key_elements": [ "Continuous rectangular roof deck with a perimeter parapet", "Broad lawn adjoining fixed antenna and omnidirectional speaker equipment", "Southwest roof-access enclosure and east-facing exit", "Clear southern access route linking the enclosure, lawn, and touchdown surface", "Eastern touchdown surface separated from tall communications equipment", "Identical structural layout for the daytime attack and nighttime aftermath", "Aircraft, damage, energy emission, debris, and robot remnants reserved for state overlays" ], "numbered_elements": [ { "number": 1, "label": "Roof circulation deck", "category": "area", "position_hint": "continuous open circulation around the lawn and equipment pad, inside the roof perimeter", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Roof lawn", "category": "area", "position_hint": "western and central roof, north of the access path", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Equipment pad", "category": "area", "position_hint": "north-center roof, adjoining the lawn", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Large antenna", "category": "prop", "position_hint": "western part of the north-center equipment pad", "base_layer_decision": "base_persistent_fixture" }, { "number": 5, "label": "Omnidirectional speaker assembly", "category": "prop", "position_hint": "equipment pad immediately east of the antenna, facing outward around the roof", "base_layer_decision": "base_persistent_fixture" }, { "number": 6, "label": "Roof-access enclosure", "category": "area", "position_hint": "southwest corner of the roof", "base_layer_decision": "base_structural_unit" }, { "number": 7, "label": "Roof-access door", "category": "opening", "position_hint": "east wall of the roof-access enclosure, connecting directly to the access path", "base_layer_decision": "base_opening" }, { "number": 8, "label": "Access path", "category": "area", "position_hint": "along the southern lawn edge, extending east from the roof-access door", "base_layer_decision": "base_structural_unit" }, { "number": 9, "label": "Touchdown surface", "category": "area", "position_hint": "eastern roof, clear of the north-center antenna and speaker equipment", "base_layer_decision": "base_structural_unit" }, { "number": 10, "label": "Perimeter parapet", "category": "area", "position_hint": "continuous narrow band around the outer roof edge; marker on the north segment", "base_layer_decision": "base_structural_unit" }, { "number": 11, "label": "Bullet-impact damage", "category": "prop", "position_hint": "central lawn margin and adjoining circulation deck between the equipment pad and touchdown surface", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 12, "label": "Landed armed helicopter", "category": "prop", "position_hint": "center of the eastern touchdown surface, with rotor clearance from the fixed equipment", "base_layer_decision": "state_overlay_transient_object" }, { "number": 13, "label": "Vertical white energy column", "category": "prop", "position_hint": "east-central lawn margin, south of the speaker assembly and west of the touchdown surface", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 14, "label": "Scorched roof surfaces", "category": "prop", "position_hint": "east-central lawn margin and adjacent deck around the former energy-column origin", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 15, "label": "Scattered battle debris", "category": "prop", "position_hint": "central and eastern deck around the scorched surface, below the antenna and speaker sightline", "base_layer_decision": "state_overlay_transient_object" }, { "number": 16, "label": "Oxidized robot torso remnant", "category": "prop", "position_hint": "east-central lawn margin at the former energy-column origin, south of the speaker assembly", "base_layer_decision": "state_overlay_transient_object" } ], "camera_recommendations": [ { "bg_id": "L278B01", "sub_location": "roof_antenna_deck", "camera_position": "On number 8 east of number 7, facing northeast across number 2 toward numbers 4 and 5, with number 9 on the right and number 13's origin in the central foreground.", "camera_height": "eye-level standing approximately 1.6 m", "lens_hint": "28mm wide angle", "framing_notes": "Keep the antenna and speakers readable behind the central action area and the landed helicopter on the right. Use the same camera for S89_Shot42 and S89_Shot53. Number 13 is applicable only to the energy-emission moment in S89_Shot53, not a permanent feature of the daytime background. Its overwhelming white exposure occurs on this same physical rooftop, never in a replacement fantasy space. Preserve the underlying layout even when temporarily obscured.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 ], "ignore_numbered_elements": [ 14, 15, 16 ] }, { "bg_id": "L278B02", "sub_location": "roof_antenna_deck", "camera_position": "Near the eastern end of number 8, south of number 16, facing north across numbers 14 and 15 toward numbers 4 and 5.", "camera_height": "low standing approximately 1.2 m", "lens_hint": "35mm moderately wide angle", "framing_notes": "Frame number 16 and the surrounding scorched surfaces and debris prominently, retaining the established antenna-to-speaker relationship behind them. Nighttime aftermath with no residual energy column or whiteout. Keep the touchdown surface and helicopter outside this tighter frame; this exclusion does not establish the aircraft's fate. Damage must not arbitrarily relocate the persistent equipment.", "use_numbered_elements": [ 1, 2, 3, 4, 5, 10, 11, 14, 15, 16 ], "ignore_numbered_elements": [ 12, 13 ] } ], "scale_guideline": "The deck is the roof of a large institutional research building; its storey count and total height are unspecified, while approximately 3–5 m per occupied storey is a typical conservative institutional range rather than a confirmed measurement. A footprint on the order of 30–50 m across is a typical planning allowance for a roof accommodating a lawn, substantial communications equipment, circulation, and helicopter touchdown clearance; exact dimensions are not established. The large antenna rises substantially above the access enclosure and parapet, but its full height and the speaker mounting height are unspecified. The access enclosure connects to circulation below the roof, whose stair extent and facade opening counts are unknown; the depicted roof door is a schematic access provision, not an exhaustive opening count.", "applied_shots": [ "S89_Shot42", "S89_Shot53", "S89_Shot66" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] }, "fp_l282_restoration_lab": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic floor plan of a spacious robot-restoration laboratory in a future Korean research facility. This is a simple architectural CAD-style reference map, not artwork or a scene illustration. Use single-weight black outlines, geometric shapes, and a white or off-white background. Strictly prohibit 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, and material rendering. The laboratory's nighttime darkness must not affect the readability or background color of this diagram.\n\nArrange one broad rectangular room with north at the top. Use a restrained institutional layout with a central worktable, rear seating, a large physical wall monitor, generous circulation, and an unobstructed presentation area. Do not add traditional decorative architecture or unmentioned futuristic equipment. The southwest entrance position is a schematic layout assumption. Do not import the circular glass enclosure, hospital room, rooftop, office, or equipment arrays from other laboratories.\n\nDraw the enclosing laboratory footprint with circled marker 1 in its clear eastern circulation margin. Divide the interior into adjoining colored functional areas without internal partition walls: a pale cyan Service Zone across the northern work area, marked 2; a pale yellow Shared Zone across the middle presentation area, marked 3; a pale blue Seating Zone across the southern rear area, marked 4; and a small pale beige Threshold Zone at the southwest entrance, marked 5. Fill remaining circulation space pale gray. Every area fill must be one solid flat pastel color, with no blending, gradients, or drop shadows. Zone boundaries are functional color boundaries, not walls or raised platforms.\n\nPlace a broad rectangular restoration table, marker 6, centrally in the Service Zone, with its long axis east-west and working clearance on every side. This single table serves both component display and later assembly; its altar-like description must not become a literal altar, dais, or steps. Place a large physical monitor, marker 7, as a narrow rectangular fixture centered against the north wall, aligned behind the table. Keep its screen blank in the plan. Place two separate simple chair glyphs, markers 8 and 9, side by side in the southern Seating Zone, both facing north toward the table and monitor. Leave the central Shared Zone between the chairs and table open for presentation and approach. Add a tiny rectangular integrated control-button glyph, marker 10, at the table's southwest edge. Draw one schematic hinged entrance in the west wall near the southwest corner, marker 11, using a door leaf and swing arc. Leave the remaining perimeter uninterrupted; no windows are established for this room.\n\nUse simple top-down symbolic furniture and fixture glyphs only. Draw exactly one small circle containing each black integer from 1 through 11 beside its corresponding area, item, or opening. Do not repeat numbers. Do not draw markers 12 through 16 or their contents: loose robot components, an assembled body, a memory chip, screen programming, and holographic imagery are separate state overlays. Do not draw people, robots, landscapes, projection beams, projector hardware, camera icons, camera arrows, field-of-view cones, dimensions, legends, or state annotations. The only permitted text is the short generic zone names; all item identification must use numbered circles.", "key_elements": [ "One spacious laboratory with open circulation and no imported glass enclosure or adjacent-room furnishings.", "North-wall physical monitor aligned behind one central component-restoration table.", "Two rear seats face the table and monitor across a clear presentation area.", "Solid pastel functional zones do not imply partitions, platforms, or changes in floor level.", "Southwest entrance and precise fixture positions are schematic staging assumptions, not text-established coordinates.", "The physical room remains nighttime during the projected daytime landscape.", "Disassembled components, reconstructed body, chip, monitor programming, and holographic imagery are overlays, never permanent plan furniture.", "Tabletop states in S90_Shot4 and S90_Shot13 are mutually exclusive despite sharing the same background ID." ], "numbered_elements": [ { "number": 1, "label": "Laboratory enclosure", "category": "area", "position_hint": "Entire rectangular room; marker in eastern circulation margin", "base_layer_decision": "base_structural_unit" }, { "number": 2, "label": "Restoration work zone", "category": "area", "position_hint": "Northern interior, surrounding the table and physical monitor", "base_layer_decision": "base_structural_unit" }, { "number": 3, "label": "Presentation zone", "category": "area", "position_hint": "Open central floor between rear seats and restoration table", "base_layer_decision": "base_structural_unit" }, { "number": 4, "label": "Rear seating zone", "category": "area", "position_hint": "Southern interior, facing north", "base_layer_decision": "base_structural_unit" }, { "number": 5, "label": "Entrance threshold", "category": "area", "position_hint": "Southwest corner inside the proposed entrance", "base_layer_decision": "base_structural_unit" }, { "number": 6, "label": "Restoration table", "category": "furniture", "position_hint": "North-central room, long axis east-west, below the monitor", "base_layer_decision": "base_persistent_furniture" }, { "number": 7, "label": "Large physical monitor", "category": "prop", "position_hint": "Centered against the north wall behind the restoration table", "base_layer_decision": "base_persistent_fixture" }, { "number": 8, "label": "Rear left seat", "category": "furniture", "position_hint": "Southern seating zone, west of center, facing north", "base_layer_decision": "base_persistent_furniture" }, { "number": 9, "label": "Rear right seat", "category": "furniture", "position_hint": "Southern seating zone, east of number 8, facing north", "base_layer_decision": "base_persistent_furniture" }, { "number": 10, "label": "Presentation control button", "category": "prop", "position_hint": "Integrated into the southwest edge of number 6; placement is schematic", "base_layer_decision": "base_persistent_fixture" }, { "number": 11, "label": "Laboratory entrance", "category": "opening", "position_hint": "West wall near southwest corner; proposed circulation opening", "base_layer_decision": "base_opening" }, { "number": 12, "label": "Disassembled robot components", "category": "prop", "position_hint": "On number 6 during S90_Shot4 and the projection moment of S90_Shot9; replaced by number 13 for S90_Shot13", "base_layer_decision": "state_overlay_transient_object" }, { "number": 13, "label": "Reassembled robot body", "category": "prop", "position_hint": "On the same number 6 in S90_Shot13 only; mutually exclusive with number 12", "base_layer_decision": "state_overlay_transient_object" }, { "number": 14, "label": "Memory chip handoff", "category": "prop", "position_hint": "At the rear seating near numbers 8 and 9 during S90_Shot4 only", "base_layer_decision": "state_overlay_transient_object" }, { "number": 15, "label": "Worldwide energy supply display", "category": "prop", "position_hint": "Confined to the physical screen surface of number 7 in the non-projection background", "base_layer_decision": "state_overlay_plot_cue" }, { "number": 16, "label": "Island landscape and robot projection", "category": "prop", "position_hint": "Landscape programming on number 7 with blue-toned landscape and giant robot imagery projected into number 3 during S90_Shot9 only", "base_layer_decision": "state_overlay_plot_cue" } ], "camera_recommendations": [ { "bg_id": "L282B02", "sub_location": "parts_restoration_lab", "camera_position": "Near the southeast edge of number 4, just behind and to the right of number 9, facing diagonally northwest across numbers 8 and 9 toward number 6 and number 7.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "32–35 mm wide angle", "framing_notes": "Use one stable room view for both shots: rear seats in the lower foreground, the full restoration table in the middle distance, and the physical monitor behind it. Preserve the quiet nighttime interior. The applicability set covers two shot-dependent alternatives, not simultaneous contents: S90_Shot4 uses number 12 on the table and number 14 at the seats, with number 13 absent; S90_Shot13 uses number 13 on the identical table, with numbers 12 and 14 absent. Number 15 stays confined to the monitor. Never show both tabletop states together or add an active hologram.", "use_numbered_elements": [ 1, 2, 3, 4, 6, 7, 8, 9, 10, 12, 13, 14, 15 ], "ignore_numbered_elements": [ 16 ] }, { "bg_id": "L282B01", "sub_location": "parts_restoration_lab", "camera_position": "Near the southwest edge of number 4, beside and slightly behind number 8, facing diagonally northeast through number 3 toward number 6 and number 7.", "camera_height": "Standing eye level, approximately 1.6 m", "lens_hint": "28–32 mm wide angle", "framing_notes": "Frame the open presentation zone prominently while retaining both rear seats, the real table, and the physical monitor as spatial anchors. Apply number 16 as mediated imagery inside the dark laboratory, not as an exterior replacement or a change to daytime. The giant projected robot is separate from the physical components at number 12. Keep the table position unchanged and do not imply that the projection establishes a restored physical body.", "use_numbered_elements": [ 1, 2, 3, 4, 6, 7, 8, 9, 10, 12, 16 ], "ignore_numbered_elements": [ 13, 14, 15 ] } ], "scale_guideline": "Only the laboratory level is mapped; the enclosing building's storey count and overall height are unspecified, and the rooftop of the earlier research complex should not be assigned to this room automatically. A footprint roughly 10–16 m long by 8–12 m wide and clear ceiling height around 3.5–5 m are conservative typical staging ranges for a spacious advanced research room, not measurements established by the text. The table should accommodate the bulky robot body with working clearance around it, while the presentation zone retains room for standing viewers and an enlarged projected figure. The depicted entrance is a schematic circulation assumption, no window count is established, and neither a raised altar platform nor a physical giant robot is implied.", "applied_shots": [ "S90_Shot4", "S90_Shot13", "S90_Shot9" ], "group_id": "bg_island_research_complex", "depends_on_fp": [] } }, "consumed_bg_catalog_hash": "c2c23f887261bc5b", "consumed_shot_binding_hash": "4957851da6e5119b" }, "step_id": "floor_plan_prompt", "run_id": "4aacc37e-c3c7-4dd7-a117-d83ba7e19845", "resolved_model": "gpt", "updated_at": "2026-09-18T17:37:51.096350+00:00", "project_config_snapshot": {} }