{ "status": "completed", "applicable_count": 1, "completed_count": 1, "failed_count": 0, "schema_version": 2, "config_hash": "b721e41033bb6bac", "data": { "floor_plans": { "fp_l02_dining_hall": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a compact, modest street-front neighborhood restaurant typical of southern Korea from the early 2000s through the mid-2010s. Show a simple rectangular dining hall at the street-facing south side and a shallow rear kitchen at the north side, reflecting the efficient geometry of a small family-run eatery: a central circulation aisle from the entrance to the kitchen, closely spaced rectangular four-seat table-and-chair sets, a broad kitchen connection, and compact service fixtures. Use clean CAD-like geometric construction with uniform single-weight black outlines on a white or off-white background. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, surface textures, or material rendering.\n\nApply single flat pastel solid fills with no blending: number 1, the Dining Hall shared zone, is pale yellow; number 2, the Kitchen service zone, is pale cyan; number 3, the Entrance threshold zone, is pale beige. Keep each color consistent and contained by black outlines. Larger generic area text may read only “Shared Zone,” “Service Zone,” and “Threshold Zone.” Include no other words, captions, legend, dimensions, or annotations. A small north arrow with “N” may appear in one corner.\n\nPlace the kitchen across the north rear edge and the street facade along the south edge. Draw number 4 as a centered sliding street entrance using parallel sliding-panel plan symbols. Draw number 5 and number 6 as narrow storefront windows using double parallel lines in the south wall, one on each side of the entrance. Draw number 7 as a broad open connection between the dining hall and kitchen. Draw four grouped table-and-chair symbols: number 8 centered toward the rear and aligned with the kitchen opening, number 9 at the southwest front, number 10 at the southeast front, and number 11 along the northwest rear side. Keep a clear aisle from number 4 through number 8 toward number 7. Draw number 12 as a simple top-down rectangular television on a fixed low stand against the east wall. Draw number 13 as a standard top-down sink symbol along the north kitchen wall. Draw number 14 as a narrow built-in service counter beside the kitchen opening.\n\nEvery visible base element must have one small white circle with a black number. Draw markers 1 through 14 exactly once each. Do not draw marker 15 or marker 16 and do not depict their simmering pot, bottle, or glasses, because they are transient state-overlay objects. Use only simple top-down plan glyphs: rectangular tables, small chair rectangles, sliding-panel lines, double-line windows, sink basins, counter rectangles, and a flat television symbol. Do not add people, food, dishes, money, cleaning activity, motion cues, camera icons, field-of-view cones, arrows other than the north arrow, or decorative imagery.", "key_elements": [ "Compact rectangular street-front dining hall", "Rear kitchen service zone connected by a broad opening", "Shallow entrance threshold with a sliding street door", "Two narrow storefront windows flanking the entrance", "Four persistent rectangular table-and-chair sets with clear circulation aisles", "Television on a fixed low stand along the side wall", "Kitchen sink and built-in service counter", "Transient simmering stew pot reserved for the later-night overlay", "Transient bottle and small drinking-glass set reserved for the later-night overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Dining hall shared zone", "number": 1, "position_hint": "main central and street-facing portion of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Kitchen service zone", "number": 2, "position_hint": "rear north side behind the dining hall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Entrance threshold zone", "number": 3, "position_hint": "shallow recess at the center of the south street wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Sliding street entrance", "number": 4, "position_hint": "center of south wall at the entrance threshold" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "West storefront window", "number": 5, "position_hint": "south wall, west of the sliding entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "East storefront window", "number": 6, "position_hint": "south wall, east of the sliding entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Kitchen opening", "number": 7, "position_hint": "north boundary of dining hall, connecting toward the kitchen" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Central table set", "number": 8, "position_hint": "center-rear of dining hall, aligned with the kitchen opening" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "West front table set", "number": 9, "position_hint": "southwest portion of dining hall beside the entrance aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "East front table set", "number": 10, "position_hint": "southeast portion of dining hall beside the entrance aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Rear side table set", "number": 11, "position_hint": "northwest side of dining hall near the kitchen boundary" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Television and fixed stand", "number": 12, "position_hint": "against the east wall, visible from the central table" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Kitchen sink", "number": 13, "position_hint": "along the north wall inside the kitchen service zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "Built-in service counter", "number": 14, "position_hint": "along the dining-hall side of the kitchen boundary, beside number 7" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Simmering stew pot", "number": 15, "position_hint": "on number 8 during the quiet later-night meal only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Bottle and drinking glasses", "number": 16, "position_hint": "on number 8 during the intimate later-night conversation only" } ], "camera_recommendations": [ { "bg_id": "L02B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 7 (kitchen opening), facing diagonally across number 1 (dining hall) toward number 4 (sliding entrance), with number 8 (central table set) beside the crossing path", "framing_notes": "Keep the route between the kitchen and street entrance unobstructed; include the table rows and entrance threshold so simultaneous exiting and entering actions remain readable.", "ignore_numbered_elements": [ 15, 16 ], "lens_hint": "35mm moderate wide angle", "sub_location": "dining_hall", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] }, { "bg_id": "L02B03", "camera_height": "eye-level seated-to-standing compromise, approximately 1.4 m", "camera_position": "near number 4 (sliding entrance), facing diagonally toward number 8 (central table set), number 12 (television), and number 7 (kitchen opening)", "framing_notes": "Emphasize the empty surrounding table sets while keeping the central conversation table, simmering pot, drink set, television, and distant kitchen connection legible.", "ignore_numbered_elements": [], "lens_hint": "35mm natural wide angle", "sub_location": "dining_hall", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ] } ], "scale_guideline": "The restaurant occupies one ground-floor level; the host building's total storey count is not specified. A compact footprint of roughly 50–90 square metres and a 2.7–3.2 m interior storey height are typical for this kind of modest neighborhood eatery, but neither measurement is stated in the scenes. The street facade has one sliding entrance and two narrow flanking windows in this plan, while one broad internal opening connects the dining hall to the rear kitchen. No stairs, major level changes, tanks, or other multi-storey vertical elements are indicated within this floor-plan scope.", "applied_shots": [ "S2_Shot5", "S2_Shot6", "S71_Shot4", "S71_Shot8" ], "group_id": "bg_neighborhood_restaurant", "depends_on_fp": [] }, "fp_old_house_main": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a compact early-2000s southern regional dwelling interior. Show a modest shared sleeping room on the west, a raised central wooden-floored hall in the middle, a small service kitchen connected on the east or northeast, and a shallow exterior threshold along the south. Use layout geometry typical of an older compact dwelling: the shared sleeping room opens directly onto the central hall through sliding doors, the kitchen remains visibly connected through a simple doorway, and the main exterior entrance aligns with the hall. Fill the shared bedroom with one solid pale blue color and add the optional generic area label Private Zone; fill the central hall with one solid pale yellow color and label it Shared Zone; fill the kitchen with one solid pale cyan color and label it Service Zone; fill the exterior threshold with one solid pale beige color and label it Threshold Zone. Use the same solid color consistently for each area, with no blending. Draw single-weight black outlines on a white or off-white background using clean geometric CAD-plan conventions only. Include sliding-door lines between the bedroom and hall, a standard door swing at the exterior entrance, a simple doorway into the kitchen, double parallel-line window symbols on the bedroom exterior wall and the hall exterior wall, two adjacent top-down floor-bedding rectangles, a rectangular wardrobe, a low rectangular computer desk, a small landline telephone glyph, a boxy desktop computer and monitor glyph, and a kitchen counter with standard sink and cooking-surface plan symbols. Place small circular black-number markers exactly once for base elements 1 through 15: 1 shared bedroom, 2 central wooden hall, 3 kitchen, 4 exterior threshold, 5 bedroom sliding doors, 6 kitchen doorway, 7 main entrance door, 8 hall exterior glazing, 9 bedroom window, 10 paired floor bedding, 11 wardrobe, 12 low computer desk, 13 landline telephone, 14 desktop computer, and 15 kitchen counter and sink. Do not draw marker 16 or the hanging uniform because it is a transient overlay object. Apart from the optional generic zone labels and a small north arrow, include no words, captions, legends, dimensions, camera symbols, field-of-view cones, or annotations. Strictly flat diagram only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendered lighting, no textured surfaces, and no material rendering.", "key_elements": [ "Compact early-2000s domestic layout organized around a raised central wooden-floored hall", "Shared sleeping room directly connected to the central hall by sliding doors", "Service kitchen opening visibly onto the central hall", "Exterior threshold and entrance aligned with the central hall", "Paired floor-bedding positions in the shared bedroom", "Wardrobe with a morning-specific hanging uniform overlay cue", "Low computer desk with period-appropriate desktop computer and landline telephone", "Flat pastel zoning with unique numbered base markers" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared bedroom", "number": 1, "position_hint": "west side of plan, opening directly onto the central hall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central wooden hall", "number": 2, "position_hint": "center of plan between the bedroom, kitchen, and exterior threshold" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "kitchen", "number": 3, "position_hint": "east or northeast side of the central hall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior threshold", "number": 4, "position_hint": "south edge of the central hall at the main entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bedroom sliding doors", "number": 5, "position_hint": "shared wall between the bedroom and central hall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "kitchen doorway", "number": 6, "position_hint": "opening between the central hall and kitchen" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main entrance door", "number": 7, "position_hint": "south side of the exterior threshold" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "hall exterior glazing", "number": 8, "position_hint": "south-facing exterior wall of the central hall, admitting morning sunlight" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bedroom window", "number": 9, "position_hint": "outer west or north wall of the shared bedroom" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "paired floor bedding", "number": 10, "position_hint": "inner half of the shared bedroom with two adjacent sleeping positions" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "wardrobe", "number": 11, "position_hint": "bedroom wall opposite or beside the sliding doors" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low computer desk", "number": 12, "position_hint": "bedroom wall near the telephone connection" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "landline telephone", "number": 13, "position_hint": "on the low desk in the shared bedroom" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "desktop computer", "number": 14, "position_hint": "on the low desk beside the landline telephone" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "kitchen counter and sink", "number": 15, "position_hint": "along the outer wall of the kitchen, visible through the kitchen doorway" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "uniform hanging at wardrobe", "number": 16, "position_hint": "hanging prominently on the front or side of the bedroom wardrobe in the morning state" } ], "camera_recommendations": [ { "bg_id": "L03B03", "camera_height": "eye-level seated-to-standing height, approximately 1.4–1.6 m", "camera_position": "inside number 1 near number 10, facing diagonally toward number 12, number 13, and number 14, with number 5 visible as the route into number 2", "framing_notes": "Keep the shared sleeping area dominant; include the resting place, telephone, computer desk, wardrobe, and sliding exit while allowing only a narrow glimpse of the central hall.", "ignore_numbered_elements": [ 16 ], "lens_hint": "35mm moderate wide angle", "sub_location": "shared_bedroom_night", "use_numbered_elements": [ 1, 2, 5, 9, 10, 11, 12, 13, 14 ] }, { "bg_id": "L03B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "within number 2 near number 8, facing diagonally through number 5 toward number 11 and number 16, while keeping number 6 and number 15 visible to one side", "framing_notes": "Emphasize the sunlit central hall, the visibly unoccupied shared bedroom, the uniform at the wardrobe, and the clear connection to the kitchen.", "ignore_numbered_elements": [], "lens_hint": "28–35mm wide angle", "sub_location": "central_hall_morning", "use_numbered_elements": [ 1, 2, 3, 5, 6, 8, 9, 10, 11, 12, 13, 14, 15, 16 ] } ], "scale_guideline": "Treat the house as a modest single-storey dwelling, typical for this domestic layout; the storey count is not specified in the scene text. A conservative typical footprint is approximately 45–80 square metres, with an interior ceiling height around 2.3–2.7 metres. Use one principal exterior entrance and a limited number of exterior windows typical of a compact older house; no stair, upper level, or other full-height vertical circulation element is indicated.", "applied_shots": [ "S3_Shot2", "S3_Shot5", "S4_Shot3" ], "group_id": "bg_old_house", "depends_on_fp": [] }, "fp_suv_cabin": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a complete midsize SUV cabin, oriented with the vehicle front at the top. It must look like a clean architectural CAD plan or simple vehicle-layout sketch: single-weight black outlines on a white or off-white background, geometric plan symbols only. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic treatment, rendered appearance, lighting effects, textured surfaces, or material rendering. Use single flat pastel solid fills with no blending: pale yellow for the Driver Zone, pale blue for the Front Passenger Zone, pale cyan for the Rear Passenger Zone, pale gray for the Cargo Utility Zone, and pale beige for door threshold strips. Show a practical regional early-to-mid twenty-first-century five-seat SUV layout with left-hand steering: full-width dashboard at the front, steering wheel on the left, narrow center console, two individual front seats, a three-person rear bench, and a compact cargo area behind it. Draw four side doors as simple outward door-swing lines and arcs, a rear hatch opening, the windshield and four side windows as double parallel lines in the body boundary, and the rear hatch window. Show the interior rearview mirror centered behind the windshield and simple symbolic exterior mirrors at both front corners. Furniture and fixtures must remain simple top-down glyphs with no dimensional modeling. Place exactly one small white circle with a unique black number beside every base element numbered 1 through 24, matching the supplied element list. The only permitted larger text inside the drawing is the generic area text Driver Zone, Front Passenger Zone, Rear Passenger Zone, and Cargo Utility Zone. Do not place any other labels, legends, dimensions, annotations, camera icons, viewing arrows, or field-of-view cones inside the image. Do not draw numbers 25 or 26, and do not depict the wallet, printed photograph, candles, people, street gathering, tears, or any other transient event cue on this base floor plan.", "key_elements": [ "Front driver and passenger zones", "Rear three-person bench zone", "Rear cargo utility zone", "Dashboard, steering wheel, and center console", "Four outward-opening side doors", "Windshield, four side windows, and rear hatch window", "Interior rearview mirror and two exterior side mirrors", "Transient worn wallet with printed photograph excluded from base diagram", "Transient candlelit street gathering excluded from base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "driver control zone", "number": 1, "position_hint": "front left portion of cabin" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "front passenger zone", "number": 2, "position_hint": "front right portion of cabin" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear passenger zone", "number": 3, "position_hint": "central rear portion behind front seats" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "cargo utility zone", "number": 4, "position_hint": "rear portion behind rear bench" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "dashboard", "number": 5, "position_hint": "across the front edge below the windshield" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "steering wheel", "number": 6, "position_hint": "front left, attached to dashboard before driver seat" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "center console", "number": 7, "position_hint": "between the two front seats" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "driver seat", "number": 8, "position_hint": "front left, facing dashboard" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "front passenger seat", "number": 9, "position_hint": "front right, facing dashboard" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rear bench seat", "number": 10, "position_hint": "across cabin behind front seats" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front left door", "number": 11, "position_hint": "left side beside driver seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front right door", "number": 12, "position_hint": "right side beside front passenger seat" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear left door", "number": 13, "position_hint": "left side beside rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear right door", "number": 14, "position_hint": "right side beside rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "windshield", "number": 15, "position_hint": "full-width front boundary ahead of dashboard" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front left side window", "number": 16, "position_hint": "within front left door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front right side window", "number": 17, "position_hint": "within front right door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear left side window", "number": 18, "position_hint": "within rear left door beside rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear right side window", "number": 19, "position_hint": "within rear right door beside rear bench" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear hatch opening", "number": 20, "position_hint": "rear boundary behind cargo zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear hatch window", "number": 21, "position_hint": "centered within rear hatch opening" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "interior rearview mirror", "number": 22, "position_hint": "front center immediately behind windshield" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "left exterior side mirror", "number": 23, "position_hint": "outside front left door near windshield corner" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "right exterior side mirror", "number": 24, "position_hint": "outside front right door near windshield corner" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "worn wallet with black-and-white student photograph", "number": 25, "position_hint": "temporarily handled near driver seat and steering wheel" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "candlelit street gathering beyond side window", "number": 26, "position_hint": "outside rear side windows during the dusk journey" } ], "camera_recommendations": [ { "bg_id": "L06B02", "camera_height": "seated eye level, approximately 1.25m above the cabin floor", "camera_position": "near number 2 (front passenger zone), facing diagonally across number 8 (driver seat) toward number 10 (rear bench), with number 22 (interior rearview mirror) and number 18 (rear left window) in the sightline", "framing_notes": "Use a restrained interior-wide composition that can accommodate the driver inspecting number 25 near the steering wheel and rear passengers looking through the side window at number 26. Keep the dashboard, rearview mirror, rear bench, and rear left window prominent.", "ignore_numbered_elements": [], "lens_hint": "28mm moderate wide angle", "sub_location": "suv_cabin", "use_numbered_elements": [ 1, 2, 3, 5, 6, 7, 8, 9, 10, 15, 16, 18, 22, 25, 26 ] } ], "scale_guideline": "This is a single-level passenger-vehicle enclosure rather than a multistorey structure. Use the proportions typical of an early-to-mid twenty-first-century midsize SUV: roughly 4.4–4.9m exterior length, 1.8–2.0m width, and 1.6–1.9m overall height; exact dimensions are not specified in the text. The plan assumes the typical configuration of four side doors, one rear hatch, one windshield, four principal side windows, and one rear hatch window, with no internal level changes.", "applied_shots": [ "S7_Shot1", "S7_Shot3", "S90_Shot8" ], "group_id": "bg_suv_cabin", "depends_on_fp": [] }, "fp_l08_forecourt": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a modest regional police-station forecourt and approach from the mid-2010s. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric plan symbols only, and minimal interior text. North is at the top. Place the rectangular station building footprint at the north edge as number 1, filled pale blue and labeled only with the generic area text \"Administrative Zone\". Directly south, draw a broad paved forecourt as number 2, filled pale yellow and labeled \"Shared Zone\". Extend a straight central vehicle approach lane from the south edge toward the forecourt as number 3, filled pale gray and labeled \"Utility Zone\". At the transition into the forecourt, draw a clear gate opening as number 4, filled pale beige and labeled \"Threshold Zone\", with a simple paired set of gateposts marked number 13. Center a simple double-door plan symbol, number 5, on the station's south-facing facade. Add two representative window-bank symbols using double parallel wall lines: number 6 west of the entrance and number 7 east of the entrance. Draw a narrow west planted verge as number 8 and a matching east planted verge as number 9, each using the same flat pale green fill and the generic label \"Landscape Zone\". Within the verges, show long parallel rows of evenly spaced circular top-down tree symbols: west row number 10 and east row number 11, forming a strong tree-lined arrival corridor. Use small white circles with black numbers for base markers 1 through 11 and 13, with every number appearing exactly once. Do not draw number 12, any SUV, people, camera icons, field-of-view cones, movement arrows, event cues, or temporary objects; number 12 belongs only to a separate state overlay. A small north arrow with \"N\" may appear in one corner. No other text or annotations. Keep all zone colors as single flat pastel fills with no blending. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Modest civic station footprint facing a paved forecourt", "Straight vehicle approach aligned with the main entrance", "Paired gateposts defining the threshold", "Central main entrance with representative frontage windows", "Parallel planted verges with long rows of metasequoia trees", "Transient arriving SUV reserved for the state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "station building footprint", "number": 1, "position_hint": "north side of plan, centered behind the forecourt" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "paved forecourt", "number": 2, "position_hint": "immediately south of the station frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "vehicle approach lane", "number": 3, "position_hint": "central north-south route extending from the south edge to the gate" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main gate opening", "number": 4, "position_hint": "between the approach lane and forecourt" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main entrance doors", "number": 5, "position_hint": "center of the south-facing station facade" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west frontage window bank", "number": 6, "position_hint": "south facade, west of the main entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east frontage window bank", "number": 7, "position_hint": "south facade, east of the main entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "west planted verge", "number": 8, "position_hint": "west side of the vehicle approach lane" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "east planted verge", "number": 9, "position_hint": "east side of the vehicle approach lane" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "west metasequoia tree row", "number": 10, "position_hint": "within the west planted verge, parallel to the approach lane" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "east metasequoia tree row", "number": 11, "position_hint": "within the east planted verge, parallel to the approach lane" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "arriving black SUV", "number": 12, "position_hint": "on the vehicle approach lane, moving north toward the gate" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "paired gateposts", "number": 13, "position_hint": "flanking the main gate opening at the north end of the approach lane" } ], "camera_recommendations": [ { "bg_id": "L08B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 4 at the gate threshold, offset beside number 3, facing diagonally north toward number 2, number 5, and number 1 while looking back along the tree-lined route formed by numbers 10 and 11", "framing_notes": "Show the modest station frontage beyond the gate, preserve the long visual corridor between both tree rows, and include transient number 12 arriving along the approach lane without blocking the entrance.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "forecourt_and_approach", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ] } ], "scale_guideline": "The station is a low-rise civic building, typically two to four storeys for this regional building type; the exact storey count is not specified. Treat the footprint as small to medium, typically around 20–40 m of frontage and 15–30 m of depth, with the forecourt and tree-lined approach extending substantially farther south. The central entrance and two frontage window banks in the plan are representative schematic openings rather than a verified literal facade count. An accessible rooftop with a parapet and an internal stair reaching roof level is directly implied by the rooftop scene, while the mature tree rows should rise above or near the height of the low-rise building.", "applied_shots": [ "S8_Shot1", "S9_Shot2" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l09_corridor": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a modest mid-2010s regional civic police-building corridor. Use a pure orthographic plan view with single-weight black outlines on a white or off-white background, geometric CAD-like shapes, and minimal text. No 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, lighting effects, textured surfaces, or material depiction. Arrange number 1 as a long straight east-west main corridor. At its east end, place number 2 as a connecting stair landing, number 3 as a clearly drawn descending stair flight connection, and number 10 as a simple fixed handrail line. Place number 4, the violent crimes office, along the south side west of center, with number 5 as its inward-swinging hinged corridor door. Place number 6, the investigation chief office, at the south-east end beside the stair landing, with number 7 as its corridor-facing hinged door and threshold. Place number 8, the station chief office, on the north side west of center, with number 9 as its corridor-facing hinged door and threshold. Use practical compact office proportions, a narrow institutional corridor, flush office entrances, and a direct stair-to-corridor relationship typical of a modest South Korean administrative building of the period. Show doors only with standard plan lines and swing arcs, stairs with evenly spaced tread lines, and the handrail with a simple linear plan symbol. Apply flat solid pastel zoning with no blending: pale beige for number 1 and number 2 circulation and threshold areas, pale blue for numbers 4, 6, and 8 private office areas, and pale gray for number 3 stair and utility circulation. Generic larger area labels such as Circulation Zone, Private Zone, and Threshold Zone may appear inside the relevant colored areas. Draw one small white circle with a black integer for each base element numbered 1 through 10, with every number appearing exactly once. Do not include any other labels, annotations, people, vehicles, loose papers, temporarily open or locked door states, confrontation cues, camera icons, field-of-view cones, or event-specific objects.", "key_elements": [ "Long straight administrative corridor", "Violent crimes office and corridor door", "Investigation chief office at the stair end", "Station chief office threshold", "Connecting stair landing and descending flight", "Fixed stair handrail", "Modest mid-2010s civic-building circulation geometry" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main corridor", "number": 1, "position_hint": "long east-west circulation spine through the center of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "stair landing", "number": 2, "position_hint": "east end of the main corridor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "stair flight connection", "number": 3, "position_hint": "east edge of the stair landing, connecting to the upper level" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "violent crimes office", "number": 4, "position_hint": "south side of the corridor, west of center" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "violent crimes office door", "number": 5, "position_hint": "south corridor wall, opening into the violent crimes office" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "investigation chief office", "number": 6, "position_hint": "south-east end of the corridor beside the stair landing" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "investigation chief office door", "number": 7, "position_hint": "south side near the east end of the corridor, adjacent to the stair landing" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "station chief office", "number": 8, "position_hint": "north side of the corridor, west of center" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "station chief office door", "number": 9, "position_hint": "north corridor wall, opening into the station chief office" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "stair handrail", "number": 10, "position_hint": "along the open side of the stair flight at the east landing" } ], "camera_recommendations": [ { "bg_id": "L09B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 1 (main corridor) at the west side, facing east along the corridor toward number 7 (investigation chief office door), number 2 (stair landing), and number 3 (stair flight)", "framing_notes": "Keep number 5 prominent in the near right side, number 7 at the far end, and the stair landing visible beyond it to support the arrival and identification exchange.", "ignore_numbered_elements": [], "lens_hint": "28mm moderate wide angle", "sub_location": "main_corridor_early_arrival", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 10 ] }, { "bg_id": "L09B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 2 (stair landing), facing west along number 1 (main corridor) toward number 5 (violent crimes office door)", "framing_notes": "Provide an unobstructed central corridor area for three standing figures, with the stair connection near the foreground and the office door clearly visible down the corridor.", "ignore_numbered_elements": [], "lens_hint": "35mm wide angle", "sub_location": "main_corridor_press_confrontation", "use_numbered_elements": [ 1, 2, 3, 4, 5, 10 ] }, { "bg_id": "L09B03", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near the east half of number 1 (main corridor), facing west toward number 9 (station chief office door) and number 8 (station chief office)", "framing_notes": "Emphasize the office threshold and leave a long, quiet corridor path for the departing group; retain number 5 as a secondary depth landmark.", "ignore_numbered_elements": [], "lens_hint": "35mm natural wide angle", "sub_location": "station_chief_office_corridor", "use_numbered_elements": [ 1, 4, 5, 8, 9 ] } ], "scale_guideline": "The stair descent directly implies at least two connected levels, but the total storey count is not specified; two to four storeys with typical floor-to-floor heights of roughly 3 to 3.5 m would be conservative for this regional civic-building type. The represented corridor wing should read as a modest administrative footprint, typically about 15 to 25 m long and 2 to 3 m wide, with compact offices arranged along it. The stair flight and fixed handrail must extend continuously between adjacent floors rather than appearing as a short decorative step.", "applied_shots": [ "S10_Shot8", "S10_Shot10", "S10_Shot12", "S51_Shot7", "S51_Shot8", "S51_Shot11", "S94_Shot1", "S94_Shot13" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l10_rest_area": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan diagram of a small outdoor staff rest area directly in front of a modest mid-2010s regional public station building. Show the station frontage as a shallow building strip along the north edge, filled pale cyan and marked with one small circled black number 1. Show the central outdoor rest area as a compact rectangular paved shared zone filled pale yellow and marked 2. Show a pedestrian approach entering from the south and leading to the building entrance, filled pale beige and marked 3. In the north facade, draw a central outward-swinging public entrance door with a standard line-and-arc plan symbol and marker 4, plus two simple double-line window symbols flanking it, with marker 5 on the west window and marker 6 on the east window. Place a long simple top-down bench parallel to the facade on the northwest side of the rest area with marker 7. Place a short row of simple fixed top-down chairs on the east side, angled toward the bench, with marker 8. Add one small geometric fixed ash receptacle between the seating groups but outside the walking path, marked 9. Add a narrow planted verge along the southwest edge, filled pale green and marked 10. Use a compact Korean regional civic-building frontage convention appropriate to the 2010s: direct paved access, practical symmetrical entrance placement, restrained outdoor staff seating, and no decorative luxury features. Use single-weight black outlines on a white or off-white background, geometric plan symbols only, and one consistent flat pastel solid fill per zone. Area labels may read only Station Frontage, Rest Area, Approach, and Planted Verge in larger simple text. Every persistent element must use its assigned small circle with a black number exactly once; include no other labels, annotations, people, cigarettes, smoke, vehicles, camera icons, view cones, or event-state cues. A small north arrow may appear in one corner. This must be a clean flat CAD-like 2D plan, not a render. Absolutely no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, color blending, or drop shadows.", "key_elements": [ "Modest public station frontage along the north edge", "Small paved outdoor staff rest area directly in front of the building", "Central station entrance connected to a pedestrian approach", "Frontage windows flanking the entrance", "Bench and fixed chair row arranged for informal conversation", "Fixed ash receptacle beside the seating", "Narrow planted verge separating the rest bay from the broader frontage" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "station frontage zone", "number": 1, "position_hint": "north edge, building frontage extending beyond the plan crop" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "outdoor rest area", "number": 2, "position_hint": "center of plan, immediately south of the station frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "paved pedestrian approach", "number": 3, "position_hint": "south-center, connecting the frontage path to the main entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main entrance door", "number": 4, "position_hint": "center of the north station facade, facing the rest area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west frontage window", "number": 5, "position_hint": "north wall, west of the main entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east frontage window", "number": 6, "position_hint": "north wall, east of the main entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rest area bench", "number": 7, "position_hint": "northwest side of the rest area, parallel to the station facade" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "fixed chair row", "number": 8, "position_hint": "east side of the rest area, angled toward the bench" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "fixed ash receptacle", "number": 9, "position_hint": "between the bench and chair row, clear of the pedestrian approach" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "planted verge", "number": 10, "position_hint": "southwest edge of the rest area, bordering the broader station frontage" } ], "camera_recommendations": [ { "bg_id": "L10B01", "camera_height": "eye-level seated-to-standing range, approximately 1.4–1.6 m", "camera_position": "near number 3 (paved pedestrian approach), facing diagonally across number 2 (outdoor rest area) toward number 7 (bench), number 8 (chair row), and number 9 (ash receptacle), with number 1 (station frontage) behind them", "framing_notes": "Frame the seating prominently for a seated staff member and two standing colleagues, while retaining the modest station entrance and frontage windows as background context.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "outdoor_rest_area", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] } ], "scale_guideline": "The main public station is typically two to four storeys for this regional civic-building type, with storey count not specified in the text and a typical floor-to-floor height of roughly 3–4 m. Treat it as a moderate civic-building footprint extending well beyond the north edge of this scoped rest-area plan; the outdoor seating bay is a small frontage-side pocket rather than a separate structure. The full facade opening count is unspecified, so use a central public entrance and regularly spaced windows consistent with a modest mid-2010s public station building.", "applied_shots": [ "S11_Shot2" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l11_conference_hall": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a modest mid-2010s regional public-sector conference hall. Use a simple rectangular hall with the presentation end at the north and the main entrance at the south. Draw single-weight black CAD-style outlines on a white or off-white background, using geometric plan symbols only. Fill each zone with one consistent flat pastel solid color: the audience shared zone in pale yellow, the raised presentation zone in pale blue, both longitudinal circulation aisles in pale green, and the rear threshold zone in pale beige. Place a shallow rectangular presentation platform centered against the north wall. Arrange three persistent audience seating banks in straight forward-facing rows, represented by repeated simple top-down chair rectangles; separate them with two clear longitudinal central aisles running from the rear threshold toward the platform. Add a shallow rear threshold strip, a centered double entrance shown with standard door leaves and swing arcs, a secondary single side exit on the east wall near the front, and three evenly spaced east-wall windows shown as double parallel wall lines. Reflect the efficient rectangular layout, compact circulation, orderly seating, and practical opening placement typical of a modest Korean regional government meeting room in the mid-2010s, expressed through geometry only. Place one small circular marker containing a unique black number exactly once for each numbered base element: 1 audience area, 2 presentation platform, 3 left seating bank, 4 center seating bank, 5 right seating bank, 6 left central aisle, 7 right central aisle, 8 rear threshold zone, 9 rear double entrance, 10 side exit door, 11 front side window, 12 middle side window, 13 rear side window. Do not write furniture or opening labels inside the drawing. Optional large generic zone labels may read Shared Zone, Presentation Zone, Circulation Zone, and Threshold Zone. A small north arrow with N may appear in one corner. Do not draw people, occupancy, cameras, view cones, event cues, or temporary objects. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered appearance, lighting effects, textured surfaces, material rendering, color blending, or drop shadows.", "key_elements": [ "Rectangular public-sector conference hall", "Front presentation platform", "Three audience seating banks with repeated chair-row symbols", "Two longitudinal central aisles", "Rear threshold and double entrance doors", "Secondary side exit", "Three side-wall windows", "Flat pastel zoning with numbered base markers" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "audience area", "number": 1, "position_hint": "large shared floor area occupying the center and rear of the hall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "presentation platform", "number": 2, "position_hint": "centered along the north wall at the front of the hall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "left seating bank", "number": 3, "position_hint": "west side of the audience area, arranged in forward-facing rows" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "center seating bank", "number": 4, "position_hint": "middle of the audience area between the two aisles" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "right seating bank", "number": 5, "position_hint": "east side of the audience area, arranged in forward-facing rows" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "left central aisle", "number": 6, "position_hint": "longitudinal circulation strip between the left and center seating banks" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "right central aisle", "number": 7, "position_hint": "longitudinal circulation strip between the center and right seating banks" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear threshold zone", "number": 8, "position_hint": "shallow circulation zone across the south rear edge of the hall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear double entrance", "number": 9, "position_hint": "center of the south wall opening into the rear threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "side exit door", "number": 10, "position_hint": "east wall near the front of the audience area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front side window", "number": 11, "position_hint": "east wall beside the forward seating rows" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "middle side window", "number": 12, "position_hint": "east wall beside the middle seating rows" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear side window", "number": 13, "position_hint": "east wall beside the rear seating rows" } ], "camera_recommendations": [ { "bg_id": "L11B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near the southwest rear corner of number 1 (audience area), facing diagonally across numbers 3, 4, and 5 (seating banks) toward number 2 (presentation platform)", "framing_notes": "Show the full depth of the occupied seating rows, preserve clear sightlines along numbers 6 and 7, and keep the presentation platform prominent at the front. The rear portions of the seating banks should remain visible for reactions from the back row.", "ignore_numbered_elements": [], "lens_hint": "28mm moderate wide angle", "sub_location": "conference_hall", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13 ] } ], "scale_guideline": "The conference hall is a single-height room within a multi-storey public office building; the scene text confirms an interior stair and accessible roof but does not specify the building's total storey count. A modest regional public-sector building of this period would typically be two to four storeys, with roughly 3.0–3.6m floor-to-floor heights, while an assembly room of this type would typically occupy about 120–220 square metres. The schematic uses a typical opening arrangement of one rear double-door opening, one secondary side exit, and three side-wall windows; these counts are not specified in the text. No internal vertical circulation occurs within the hall itself.", "applied_shots": [ "S12_Shot3", "S12_Shot6" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l12_detective_office": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a mid-2010s regional police detective bullpen. This must be a clean CAD-like plan or simple room-layout sketch using geometric shapes, single-weight black outlines, and a white or off-white background. Use one consistent flat pastel fill for each zone: pale yellow for the Shared Zone, pale beige for the Threshold Zone, and pale cyan for the Service Zone evidence-storage corner. Use solid fills only. No gradients, blending, drop shadows, depth, shading, ambient occlusion, textured surfaces, material rendering, lighting effects, photorealism, perspective, isometric view, axonometric view, or 3D rendering.\n\nLay out a practical rectangular office typical of a modest regional police building: number 1 marks the large shared bullpen; number 2 marks a small entrance threshold at the northeast; number 3 marks an evidence-storage service corner at the northwest. Place number 4 on an inward-swinging corridor door in the north wall. Place number 5 on a bank of three conventional windows drawn as double parallel wall lines along the south exterior wall. Keep a broad circulation aisle from the entrance through the center.\n\nPlace number 6 on a central cluster of paired rectangular desks. Within that cluster, place number 7 on the primary detective desk and number 8 on the directly adjacent partner desk so seated coworkers can converse easily. Place number 9 on a simple top-down landline telephone glyph at the inner edge of number 7. Place number 10 on a simple monitor-and-keyboard glyph at the rear of number 7. Place number 11 on a monitor and laptop-docking glyph at the rear of number 8. Place number 12 on a separate team leader desk near the northeast side, positioned to overlook the entrance and shared workstations. Place number 13 on a row of shallow filing cabinets along the west wall. Place number 14 on fixed evidence shelving lining the north and west sides of the storage corner.\n\nUse only standard top-down symbols: desks and cabinets as rectangles, office chairs as simple plan glyphs, the door as a line and swing arc, windows as double parallel lines, the telephone as a small symbolic handset, and computers as flat monitor rectangles. Every base element numbered 1 through 14 must have one small circle containing its unique black number, appearing exactly once. Do not draw markers 15 through 20 because they are transient overlay objects or plot-state cues. Minimal text only: the larger generic area labels Shared Zone, Threshold Zone, and Service Zone may appear inside their corresponding pastel areas; no other words, labels, legends, measurements, annotations, camera icons, field-of-view cones, or arrows. A small north arrow with the letter N may appear in one corner.", "key_elements": [ "Rectangular shared detective bullpen arranged around a broad central circulation aisle", "Small beige entrance threshold connected to the building corridor", "Paired central workstations for the primary detective and newly assigned partner", "Additional shared desk cluster and a team leader desk", "Persistent landline telephone and mid-2010s computer workstations", "Perimeter filing cabinets and a dedicated evidence storage corner with shelving", "Exterior window bank providing daytime office light", "Transient case records, forensic images, diary, and exposed evidence boxes excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared bullpen zone", "number": 1, "position_hint": "main rectangular office area occupying the center and most of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 2, "position_hint": "northeast corner immediately inside the corridor entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "evidence storage zone", "number": 3, "position_hint": "northwest corner separated visually from the shared bullpen by furniture placement" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "corridor entrance door", "number": 4, "position_hint": "north wall at the northeast threshold, opening inward" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window bank", "number": 5, "position_hint": "south exterior wall opposite the corridor entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "shared desk cluster", "number": 6, "position_hint": "center of the bullpen, arranged as two paired rows with a broad aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "primary detective desk", "number": 7, "position_hint": "south-central side of the shared desk cluster" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "adjacent partner desk", "number": 8, "position_hint": "directly beside number 7 within the central workstation cluster" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "shared landline telephone", "number": 9, "position_hint": "on number 7 near the inner edge shared with number 8" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "primary desktop computer", "number": 10, "position_hint": "rear edge of number 7, oriented toward the seated detective" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "partner digital workstation", "number": 11, "position_hint": "rear edge of number 8, with a monitor and laptop docking position" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "team leader desk", "number": 12, "position_hint": "northeast side of the bullpen with a clear view of the entrance and shared desks" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "perimeter filing cabinets", "number": 13, "position_hint": "along the west wall between the shared bullpen and evidence storage corner" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "evidence storage shelving", "number": 14, "position_hint": "against the north and west walls inside the evidence storage zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "piled case records", "number": 15, "position_hint": "covering much of number 7 during the daytime records review" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "dark low-quality autopsy photocopies", "number": 16, "position_hint": "spread across the front of number 7 among the piled records" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "clear autopsy images on laptop", "number": 17, "position_hint": "displayed within the laptop screen at number 11 during the night investigation" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "victim diary", "number": 18, "position_hint": "opened between numbers 7 and 8 during the night investigation" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "open evidence boxes and spread records", "number": 19, "position_hint": "extending from number 3 toward the paired workstations at night" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "delivered parcel box", "number": 20, "position_hint": "on or beside number 8 at the beginning of the night investigation" } ], "camera_recommendations": [ { "bg_id": "L12B02", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 4 (corridor entrance door), facing diagonally across number 1 (shared bullpen) toward number 6 (shared desk cluster), number 7 (primary detective desk), and number 12 (team leader desk)", "framing_notes": "Show the routine office depth, occupied desk positions, the landline at number 9, and several period-appropriate workstations without emphasizing the evidence storage corner.", "ignore_numbered_elements": [ 15, 16, 17, 18, 19, 20 ], "lens_hint": "35mm moderate wide angle", "sub_location": "detective_squad_office", "use_numbered_elements": [ 1, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ] }, { "bg_id": "L12B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "just inside number 4 (corridor entrance door), facing number 7 (primary detective desk) and number 8 (adjacent partner desk), with number 12 (team leader desk) farther to one side", "framing_notes": "Preserve a clear sightline from the entrance to the paired desks for the arrival, introduction, handshake, and doorway interruption.", "ignore_numbered_elements": [ 15, 16, 17, 18, 19, 20 ], "lens_hint": "32mm moderate wide angle", "sub_location": "detective_squad_office", "use_numbered_elements": [ 1, 2, 4, 6, 7, 8, 9, 10, 11, 12 ] }, { "bg_id": "L12B03", "camera_height": "seated eye level, approximately 1.2m", "camera_position": "beside number 8 (adjacent partner desk), facing number 7 (primary detective desk), number 9 (landline telephone), and number 10 (desktop computer)", "framing_notes": "Use a desk-focused medium shot in which number 15 (piled case records) and number 16 (dark low-quality photocopies) dominate the foreground while the adjacent workstation remains legible.", "ignore_numbered_elements": [ 17, 18, 19, 20 ], "lens_hint": "45mm normal lens", "sub_location": "primary_detective_workstation", "use_numbered_elements": [ 1, 6, 7, 8, 9, 10, 11, 15, 16 ] }, { "bg_id": "L12B04", "camera_height": "eye-level seated to standing, approximately 1.4m", "camera_position": "near number 7 (primary detective desk), facing across number 8 (adjacent partner desk) toward number 3 (evidence storage corner) and number 14 (evidence shelving)", "framing_notes": "Keep the paired workstations and storage corner in one diagonal composition. Allow tighter crops to emphasize number 17 (clear images on the laptop), number 18 (victim diary), number 19 (open evidence boxes and spread records), and number 20 (delivered parcel box).", "ignore_numbered_elements": [ 15, 16 ], "lens_hint": "35mm moderate wide angle", "sub_location": "night_investigation_workstations", "use_numbered_elements": [ 1, 3, 6, 7, 8, 9, 10, 11, 14, 17, 18, 19, 20 ] } ], "scale_guideline": "The office occupies one storey within a multi-storey regional police station with an accessible rooftop; the exact storey count is not specified, while three to four storeys is typical for this building type and era. Treat the bullpen as a medium institutional office, typically about 10–15 m long and 7–10 m wide, with an ordinary storey height rather than a double-height interior. A typical exterior office facade would have two to four windows, while this schematic uses one three-window bank and one corridor entrance door. The building stairs continue between multiple levels and up to the rooftop, but they are outside this floor plan's scope.", "applied_shots": [ "S13_Shot2", "S13_Shot6", "S22_Shot1", "S22_Shot6", "S22_Shot10", "S24_Shot3", "S49_Shot10", "S49_Shot17", "S49_Shot19" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l13_investigation_chief_office": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a mid-2010s provincial Korean public-sector investigation chief's private office. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric shapes only, and clear practical circulation. The room is a simple rectangular office divided into four solid pastel floor areas: Private Zone in pale blue across the north and east desk area, Shared Zone in pale yellow across the west and center sofa meeting area, Threshold Zone in pale beige immediately inside the southwest entrance, and Service Zone in pale cyan along the southeast built-in storage strip. Use each color consistently, with hard edges, no blending. Place an inward-swinging corridor door in the west wall near the southwest corner, shown by a standard door leaf and swing arc. Place one exterior window bank in the north wall, shown as double parallel lines. Put a large rectangular executive desk in the northeast work zone, oriented so its chair is on the east side and faces west toward the room. Arrange a practical meeting area with one sofa against the south wall, one freestanding sofa facing it, and a simple rectangular low table between them. Add a built-in document cabinet against the southeast wall. Show all furniture with conventional top-down symbolic glyphs: sofa rectangles with cushion divisions, a plain desk rectangle, a simple chair symbol, a plain low table rectangle, and a built-in cabinet rectangle. Add small circular markers with black numbers 1 through 13, each number appearing exactly once, positioned on the corresponding persistent room, zone, opening, fixture, or furniture element. Do not draw markers 14, 15, 16, or 17 and do not depict reports, evidence photographs, laptop evidence, or a visitor handbag because these are transient overlay elements. Keep text inside the drawing minimal: only the larger generic area labels Private Zone, Shared Zone, Threshold Zone, and Service Zone may appear. No other labels, captions, legends, annotations, camera icons, field-of-view cones, or arrows; a small north arrow with N in one corner is allowed. No 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Single rectangular private office with a corridor entrance and an exterior window bank", "Private desk work zone occupying the north and east side", "Shared sofa meeting zone organized around a central low table", "Compact threshold zone immediately inside the corridor door", "Built-in document storage along the southeast wall", "Mid-2010s provincial public-sector office geometry with restrained, practical furniture spacing", "Overlay-only case reports, printed evidence photographs, laptop evidence, and visitor handbag" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private office room", "number": 1, "position_hint": "entire enclosed rectangular room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private work zone", "number": 2, "position_hint": "north and east portion of the office around the executive desk" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared meeting zone", "number": 3, "position_hint": "west and central portion of the office around the sofas and low table" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "threshold zone", "number": 4, "position_hint": "southwest corner immediately inside the corridor door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage service zone", "number": 5, "position_hint": "narrow southeast strip beside the built-in cabinet" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "corridor swing door", "number": 6, "position_hint": "west wall near the southwest corner, opening inward toward the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window bank", "number": 7, "position_hint": "north wall above the private work zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "executive desk", "number": 8, "position_hint": "northeast portion of the room, oriented toward the meeting zone and entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "desk chair", "number": 9, "position_hint": "east side of the executive desk, facing west into the room" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "wall sofa", "number": 10, "position_hint": "south wall within the shared meeting zone, west of the storage zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "freestanding sofa", "number": 11, "position_hint": "central-west meeting zone, facing the wall sofa across the low table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "central low table", "number": 12, "position_hint": "between the two sofas in the shared meeting zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in document cabinet", "number": 13, "position_hint": "southeast wall within the storage service zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "cold case reports", "number": 14, "position_hint": "temporarily arranged on the executive desk or central low table during case review" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "printed evidence photographs", "number": 15, "position_hint": "temporarily placed side by side among documents on the desk or low table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "evidence laptop", "number": 16, "position_hint": "temporarily open on the desk or central low table for digital evidence review" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "visitor handbag", "number": 17, "position_hint": "temporarily beside the visitor sofa during the family interview, potentially tipped and then set upright" } ], "camera_recommendations": [ { "bg_id": "L13B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 6 (corridor door), facing diagonally across number 3 (shared meeting zone) toward number 8 (executive desk), with number 12 (central low table) in the middle ground", "framing_notes": "Use a moderately wide composition that connects the desk and meeting area; the background overlay may place numbers 14, 15, and 16 on number 8 or number 12 as required by the evidence-review moment.", "ignore_numbered_elements": [ 17 ], "lens_hint": "35mm wide angle", "sub_location": "investigation_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ] }, { "bg_id": "L13B01", "camera_height": "eye-level seated-to-standing range, approximately 1.4 m", "camera_position": "near number 8 (executive desk), facing toward number 3 (shared meeting zone), number 10 (wall sofa), number 11 (freestanding sofa), and number 12 (central low table)", "framing_notes": "Prioritize the opposing sofa seats and central table for an emotional interview or intense group discussion; number 17 is a transient interview object and must remain separate from the base plan.", "ignore_numbered_elements": [ 14, 15, 16 ], "lens_hint": "40mm normal-wide lens", "sub_location": "investigation_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 17 ] }, { "bg_id": "L13B03", "camera_height": "eye-level seated, approximately 1.25 m", "camera_position": "near number 6 (corridor door), facing diagonally toward number 10 (wall sofa), number 11 (freestanding sofa), and number 12 (central low table), with number 8 (executive desk) behind them", "framing_notes": "Keep the sofa meeting area open and uncluttered for a private two-person conversation and playful physical interaction; depict the clean office state without case evidence or the interview handbag.", "ignore_numbered_elements": [ 14, 15, 16, 17 ], "lens_hint": "40mm normal-wide lens", "sub_location": "investigation_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ] } ], "scale_guideline": "This plan covers one office on a single floor within a civic building; the full building storey count is not specified in the text. A two-to-four-storey structure, roughly 7–15 m overall with typical 3.0–3.6 m floor-to-floor heights, is a conservative regional range for this building type. The office itself is typically about 20–35 square metres, with one explicit corridor door and one exterior window bank used here as a typical planning assumption rather than a stated facade count.", "applied_shots": [ "S14_Shot2", "S14_Shot4", "S17_Shot2", "S21_Shot2", "S21_Shot4", "S21_Shot5", "S50_Shot1", "S50_Shot8", "S27_Shot5", "S27_Shot10", "S39_Shot1", "S39_Shot3", "S46_Shot11", "S46_Shot15" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l14_records_room": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a compact, narrow records archive in a mid-2010s regional public-service building. Use a simple rectangular room with a single corridor-side entry door centered near the south wall, two long parallel tall archive shelf runs along the west and east sides, a box-storage rack across the north end, and a very narrow north-south working aisle between the shelf runs. Maintain a small clear threshold immediately inside the door. Place a simple top-down step-chair glyph in the aisle beside the west shelving. Depict old document-box storage only as orderly small rectangular box symbols integrated into the shelving and rear rack; do not show people, active handling, displaced boxes, loose reports, or other event action. Apply flat solid pastel area coding consistently: the main archive storage and service zone in pale cyan, the central shared working aisle in pale yellow, and the entrance threshold zone in pale beige. Shelf footprints may use pale gray while remaining within their underlying zones. Use single-weight black outlines on a white or off-white background, geometric CAD-like symbols, clean wall lines, a door leaf with a standard swing arc, and no window because none is established. Add small circular markers with black numbers exactly once for base elements 1 through 8. Do not draw marker 9 and do not depict dust, because number 9 is reserved for a separate state overlay. Minimal text only: optional large generic area labels 'Service Zone', 'Shared Zone', and 'Threshold Zone', plus an optional small north arrow. No other labels, legends, annotations, camera icons, view cones, arrows, or measurements inside the drawing. Strictly flat 2D plan view only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering.", "key_elements": [ "Compact rectangular records archive", "Single corridor-side entry door", "Two parallel tall archive shelf runs", "Rear box-storage rack", "Narrow central working aisle", "Small entrance threshold", "Persistent step chair", "Dusty archive condition reserved for the state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "records archive service zone", "number": 1, "position_hint": "entire compact rectangular room surrounding the shelving and aisle" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "single entry door", "number": 2, "position_hint": "south wall near the center, opening inward without blocking the main aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west tall archive shelf run", "number": 3, "position_hint": "along the west wall, extending from beyond the entrance clearance toward the north end" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "east tall archive shelf run", "number": 4, "position_hint": "parallel to number 3 along the east wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rear box-storage rack", "number": 5, "position_hint": "against the north wall at the far end of the working aisle" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central working aisle", "number": 6, "position_hint": "narrow north-south strip between numbers 3 and 4" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 7, "position_hint": "small circulation area immediately inside number 2" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "step chair", "number": 8, "position_hint": "inside the working aisle beside the upper portion of the west shelf run" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "settled dust on shelves and boxes", "number": 9, "position_hint": "across shelf tops and old document boxes throughout the archive; overlay only and not drawn on the floor plan" } ], "camera_recommendations": [ { "bg_id": "L14B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 2 (entry door) and number 7 (entrance threshold), facing straight down number 6 (working aisle) toward number 5 (rear box-storage rack), with numbers 3 and 4 enclosing both sides", "framing_notes": "Emphasize the cramped aisle between the two tall shelf runs, include number 8 near one shelf, and preserve visible clearance for a person handling archive boxes. Apply number 9 as a background-state overlay without adding its marker to the floor plan.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle with restrained distortion", "sub_location": "records_archive", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "This is a single compact archive room on one floor of a multi-storey institutional building; the building's exact storey count is unspecified, while three to four storeys is typical for a modest regional public-service building of this era. A typical room of this type has a footprint of roughly 10–20 square metres and a conventional institutional ceiling height around 2.4–3.0 metres; these dimensions are typical rather than text-specified. The room plan uses one corridor-side door and does not establish any exterior window. No vertical circulation occurs inside this room, although the wider building has stairs connecting occupied floors and rooftop access as implied by the scenes.", "applied_shots": [ "S15_Shot1", "S15_Shot5" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l27_station_chief_office": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a modest mid-2010s provincial public-service executive office. The drawing must resemble a clean CAD plan or simple room-layout sketch, using single-weight black outlines on a white or off-white background and geometric plan symbols only. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, or material rendering. Divide the rectangular office into four clearly bounded functional areas with consistent flat pastel solid fills: number 1 Private Work Zone in pale blue at the northeast, number 2 Shared Meeting Zone in pale yellow across the west and center, number 3 Threshold Zone in pale beige at the southeast entry, and number 4 Storage Zone in pale cyan along the east wall. Flat colors only, with no blending or drop shadows. The layout should follow a practical mid-2010s provincial police administration convention: direct access from an internal corridor, executive desk positioned to oversee the entrance, visitor seating in front of the desk, a separate compact sofa meeting group, exterior windows on two walls, and restrained built-in record storage. Draw number 5 as one inward-swinging corridor door in the south wall near the southeast corner, using a line and door-swing arc. Draw number 6 as a double-line window group in the north wall and number 7 as a double-line window group in the west wall. In the northeast work zone, draw number 8 as a broad rectangular executive desk facing the room, number 9 as a single executive chair behind it, and number 10 as two simple visitor-chair glyphs on its room-facing side. In the meeting zone, draw number 11 as a three-seat sofa against the northwest side, number 12 as a two-seat sofa along the west side, number 13 as a two-seat sofa along the southwest side while preserving a clear route from the entry, and number 14 as a low rectangular meeting table centered between the sofas. Use long rectangles with simple cushion divisions for all sofas. Draw number 15 as a shallow built-in record cabinet against the east wall in the storage zone. Place a small circle containing its unique black number once on every base element numbered 1 through 15. Do not draw number 16 or any laptop footage, newspaper, case-result headline, loose documents, people, camera icon, field-of-view cone, or event-state cue; number 16 belongs only to a separate transient overlay. Inside the plan, allow only the larger generic area labels Private Work Zone, Shared Meeting Zone, Threshold Zone, and Storage Zone, plus the numbered circles and a small north arrow marked N. Include no legend and no other text or annotations.", "key_elements": [ "Rectangular mid-2010s provincial public-service executive office", "Private executive work zone with desk and visitor chairs", "Shared meeting zone with three-sided sofa seating", "Central low meeting table", "Single corridor entry door near the southeast corner", "Two exterior window groups", "Built-in record storage along the east wall", "Shot-specific media footage display or case-result newspaper" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private work zone", "number": 1, "position_hint": "northeast portion of the office around the executive desk" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared meeting zone", "number": 2, "position_hint": "west and central portion of the office around the sofa group" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "threshold zone", "number": 3, "position_hint": "southeast corner immediately inside the corridor entry" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "storage zone", "number": 4, "position_hint": "east wall strip between the work zone and threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "corridor entry door", "number": 5, "position_hint": "south wall near the southeast corner, swinging inward toward the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "north double window", "number": 6, "position_hint": "north exterior wall above the executive work zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west double window", "number": 7, "position_hint": "west exterior wall beside the shared meeting zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "executive desk", "number": 8, "position_hint": "northeast work zone, oriented toward the room center and entry" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "executive chair", "number": 9, "position_hint": "behind the north side of the executive desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "desk visitor chairs", "number": 10, "position_hint": "room-facing side of the executive desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "head sofa", "number": 11, "position_hint": "northwest side of the meeting zone, facing south toward the meeting table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west side sofa", "number": 12, "position_hint": "west side of the meeting zone, facing east toward the meeting table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "south side sofa", "number": 13, "position_hint": "southwest side of the meeting zone, facing north toward the meeting table and clear of the entry path" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low meeting table", "number": 14, "position_hint": "center of the three-sided sofa arrangement" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in record cabinet", "number": 15, "position_hint": "against the east wall in the storage zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "shot-specific media evidence", "number": 16, "position_hint": "laptop displaying media footage on the executive desk during the media-review scene, or case-result newspaper on the meeting table during the later meeting scene" } ], "camera_recommendations": [ { "bg_id": "L27B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 3 (threshold zone), just inside number 5 (corridor entry door), facing diagonally across number 2 (meeting zone) toward number 11 (head sofa) and number 8 (executive desk)", "framing_notes": "Use a wide composition that keeps number 14 (meeting table), the surrounding sofa seating, and number 8 (executive desk) legible. Feature number 16 prominently as the shot-appropriate media display on the desk or case-result newspaper on the meeting table, without requiring both forms simultaneously.", "ignore_numbered_elements": [], "lens_hint": "28mm moderate wide angle", "sub_location": "station_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ] } ], "scale_guideline": "Treat the main station as a low-rise institutional building with at least two connected levels and an accessible rooftop, as supported by the staircase and rooftop scenes; the exact storey count is unspecified. A typical public-building floor-to-floor height for this setting is about 3–4 m, while total building height should follow the final storey count. The executive office should read as a modest single-room unit, typically about 25–40 square metres rather than a large corporate suite. Use one corridor door and a typical pair of exterior window groups for this office; the precise window count is not stated in the text.", "applied_shots": [ "S33_Shot3", "S33_Shot8", "S93_Shot3", "S93_Shot4", "S93_Shot10" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l44_rooftop": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of an open rooftop deck on a modest regional civic building. Use clean CAD-like geometry, uniform single-weight black outlines, and a white or off-white background. Use only orthographic plan symbols and flat solid pastel fills; include no dimensional projection, depth effects, shadows, shading, gradients, surface texture, lighting effects, or material rendering. Show number 1 as the large open walkable rooftop deck, filled pale yellow and optionally labeled only as Shared Zone. Place number 2 as a compact rectangular stair-access enclosure along the rear roof edge, filled pale cyan and optionally labeled only as Service Zone. Put number 3 on the single deck-facing access door, drawn with a standard door leaf and swing arc. Show number 6 as a small clear landing directly outside that door, filled pale beige and optionally labeled only as Threshold Zone. Along the opposite, field-facing edge, draw number 4 as a continuous parapet and guardrail using simple paired lines and regularly spaced post marks. Beyond that edge, show number 5 as a broad exterior rice-field zone filled pale green and optionally labeled only as Exterior Zone, divided into a few simple rectilinear field parcels with thin black lines. Keep the deck empty and uncluttered, with no loose furniture or event-state objects. Every persistent element must have one small circular marker containing its unique black number, and each number from 1 through 6 must appear exactly once. Do not place names, descriptive labels, camera symbols, view cones, arrows, measurements, legends, or annotations inside the drawing; only the optional generic zone labels and a small north arrow are permitted.", "key_elements": [ "Open walkable rooftop deck", "Compact rooftop stair-access enclosure", "Single swinging rooftop access door", "Small threshold landing outside the access door", "Field-facing parapet with guardrail posts", "Broad rice-field exterior zone beyond the parapet" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "open rooftop deck", "number": 1, "position_hint": "central and field-facing portion of the roof" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "stair access enclosure", "number": 2, "position_hint": "rear edge of the rooftop deck" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rooftop access door", "number": 3, "position_hint": "deck-facing wall of the stair access enclosure" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "field-facing parapet railing", "number": 4, "position_hint": "outer edge of the deck opposite the access enclosure" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rice-field exterior zone", "number": 5, "position_hint": "outside and beyond the field-facing parapet" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "access threshold landing", "number": 6, "position_hint": "immediately outside the rooftop access door" } ], "camera_recommendations": [ { "bg_id": "L44B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 3 (rooftop access door) and number 6 (threshold landing), facing diagonally across number 1 (rooftop deck) toward number 4 (field-facing parapet railing) and number 5 (rice-field exterior zone)", "framing_notes": "Keep the open deck broad and uncluttered, with the parapet spanning the middle distance and the rice fields clearly extending beyond it.", "ignore_numbered_elements": [], "lens_hint": "35mm wide angle", "sub_location": "rooftop_deck", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ] } ], "scale_guideline": "The station is a multi-storey civic building, typically two to four occupied storeys and roughly 8–16 m to roof level for this regional building type; the exact count is not specified in the text. Treat the rooftop as a compact-to-medium institutional footprint, typically several tens of metres across, with one rooftop access door shown in this plan. The field-facing parapet and guardrail extend along the exposed deck edge at a typical waist-to-chest guard height, while the stair-access enclosure rises only one small rooftop level above the deck.", "applied_shots": [ "S45_Shot5", "S45_Shot7" ], "group_id": "bg_police_station", "depends_on_fp": [] }, "fp_l23_research_lab": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2010s institutional forensic research office. Use a clean CAD-like plan with single-weight black outlines on a white or off-white background, geometric shapes only. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering. Divide the office into four clearly bounded flat solid pastel areas: Consultation Zone in pale yellow at the center, Record Storage Zone in pale cyan along the north wall, Window-Side Zone in pale blue along the east wall, and Entry Threshold Zone in pale beige at the southwest corner. Use each color consistently with no blending or gradient. Show a compact regional institutional-office layout: a single inward-swinging hinged entry door on the south wall near the southwest corner, a broad exterior window centered on the east wall, dense built-in bookshelves lining the north wall, two long opposing sofas arranged west and east, and a simple rectangular low table centered between them. Draw the sofas as top-down long rectangles with cushion divisions, the table as a plain rectangle, the door with a line and swing arc, the window as double parallel lines within the wall, the bookshelves as shallow segmented rectangles, and the sill as a narrow fixed ledge beneath the window. Place small circular black-number markers exactly once for base-layer elements 1 through 11: 1 consultation zone, 2 record storage zone, 3 window-side zone, 4 entry threshold zone, 5 entry door, 6 broad window, 7 built-in bookshelves, 8 west sofa, 9 east sofa, 10 low sofa table, and 11 window sill ledge. Do not draw markers 12 or 13 and do not depict the spread case records or snow globe, because they are transient state-overlay content. Allow only the four generic zone names as larger area text and an optional small north arrow; include no other labels, legends, annotations, camera icons, field-of-view cones, or arrows.", "key_elements": [ "Compact institutional research office organized around a face-to-face sofa consultation arrangement", "Two opposing sofas with a rectangular low table between them", "Dense built-in bookshelves forming a record-storage strip along one wall", "Broad exterior window with a narrow sill in the window-side zone", "Single inward-swinging entry door and a small threshold zone", "Daytime case records treated as a transient table overlay rather than permanent furniture", "Snow globe treated as a transient object associated with the window sill and later handling" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "consultation zone", "number": 1, "position_hint": "center of the research office, containing the opposing sofas and low table" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "record storage zone", "number": 2, "position_hint": "long strip along the north wall beside the consultation zone" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "window-side zone", "number": 3, "position_hint": "east side of the room directly in front of the exterior window" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry threshold zone", "number": 4, "position_hint": "southwest corner immediately inside the entry door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "entry door", "number": 5, "position_hint": "south wall near the southwest corner, swinging inward toward the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "broad window", "number": 6, "position_hint": "east exterior wall, centered on the window-side zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in bookshelves", "number": 7, "position_hint": "continuous shelving along the north wall in the record storage zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "west sofa", "number": 8, "position_hint": "west side of the consultation zone, facing east toward the table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "east sofa", "number": 9, "position_hint": "east side of the consultation zone, facing west toward the table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low sofa table", "number": 10, "position_hint": "center of the consultation zone between the two sofas" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "window sill ledge", "number": 11, "position_hint": "directly beneath the broad east-wall window" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "spread case records", "number": 12, "position_hint": "spread across the top of the low sofa table during the daytime consultation" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "castle snow globe", "number": 13, "position_hint": "normally beside the east window sill, then temporarily held or placed on the sofa table during the nighttime scene" } ], "camera_recommendations": [ { "bg_id": "L23B01", "camera_height": "eye-level seated-to-standing view, approximately 1.5m", "camera_position": "near number 4 (entry threshold), facing diagonally across number 1 (consultation zone) toward numbers 8 and 9 (opposing sofas), with number 10 (low table) centered between them", "framing_notes": "Show both sofas and the document-covered table prominently; retain part of number 7 (built-in bookshelves) as an institutional research-office anchor.", "ignore_numbered_elements": [ 13 ], "lens_hint": "35mm moderate wide angle", "sub_location": "research_lab_consultation_zone", "use_numbered_elements": [ 1, 2, 4, 5, 7, 8, 9, 10, 11, 12 ] }, { "bg_id": "L23B03", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 1 (consultation zone), facing number 6 (broad window) across number 3 (window-side zone), with number 7 (built-in bookshelves) continuing along the side wall", "framing_notes": "Make the dark reflective window and number 13 (snow globe by the sill) prominent while keeping one sofa and the book-filled shelving visible; the entry door may remain in the deeper background.", "ignore_numbered_elements": [ 12 ], "lens_hint": "40mm normal-wide lens", "sub_location": "research_lab_window_side", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13 ] } ], "scale_guideline": "The office is a single-level room within a larger institutional research building whose storey count is not specified; three to six storeys is typical for this regional building type and era. Use a compact office footprint typical of roughly 25–45 square metres, with a typical clear ceiling height of about 2.6–3.0 metres rather than a double-height space. This room has one hinged entry door and one broad exterior window, with no stairs or other multi-level elements within the floor-plan scope.", "applied_shots": [ "S29_Shot2", "S29_Shot4", "S81_Shot1", "S81_Shot4", "S81_Shot18" ], "group_id": "bg_research_institute", "depends_on_fp": [] }, "fp_studio_apartment": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a compact mid-2010s urban studio apartment. Use a clean architectural CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only. The plan is a simple rectangle with the corridor-side entrance at the south, a small lowered threshold immediately inside, an enclosed shower bathroom beside the entrance, and a linear open kitchenette along the opposite side wall. The main shared living and sleeping room occupies the central and north portion, ending at one broad exterior window on the north wall. This compact layout follows a regional small-studio convention: wet services clustered near the entrance, a raised shoeless interior floor beyond the threshold, and the main habitable space oriented toward the exterior window.\n\nApply single flat pastel solid fills consistently: shared living and sleeping zone pale yellow, open kitchen service zone pale cyan, bathroom wet zone pale blue, entrance threshold zone pale beige, and any narrow exterior or wall margin pale gray. Add only the generic area labels Shared Zone, Service Zone, Wet Zone, and Threshold Zone in larger simple text. No other labels or annotations.\n\nShow simple top-down symbolic glyphs: entrance and bathroom doors as straight leaves with swing arcs; the exterior window as double parallel lines in the wall; kitchen counter as a narrow rectangle with a standard sink symbol and inset stovetop; refrigerator as a plain rectangle; bathroom shower and toilet as standard plan symbols; bed as a rectangle with one pillow shape; compact sofa as a long rectangle with cushion divisions; small two-person table as a simple rectangle; wardrobe as a shallow built-in rectangle; television as a thin rectangle on a low console. Keep the center circulation floor clear and show the living and kitchen areas as directly connected without a partition.\n\nPlace one small outlined circle containing a unique black number beside each persistent base element, each number appearing exactly once: 1 shared living and sleeping zone, 2 open kitchen service zone, 3 shower bathroom wet zone, 4 entrance threshold zone, 5 main exterior window, 6 apartment entrance door, 7 bathroom door, 8 kitchen counter and sink, 9 built-in stovetop, 10 refrigerator, 11 shower fixture, 12 toilet, 13 single bed, 14 compact sofa, 15 television and low console, 16 small two-person table, 17 wardrobe, 18 electronic entrance lock. Do not draw markers 19 or 20 and do not depict television program imagery, captions, coffee items, people, towels, event cues, or any temporary objects on this base diagram. Do not add camera icons, view cones, arrows, dimensions, legends, or decorative text.\n\nStrictly flat plan view only. No 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, material rendering, blending, or drop shadows.", "key_elements": [ "Compact rectangular single-level studio with an open shared living and sleeping zone", "Linear open kitchenette beside the entrance-side service area", "Enclosed shower bathroom adjacent to the threshold", "Main exterior window opposite the entrance", "Bed, compact sofa, low television console, small table, and wardrobe as persistent anchor furniture", "Raised interior floor transition at the entrance threshold", "Mid-2010s electronic entrance lock", "Television crime-news imagery and coffee-making items reserved for per-background overlays" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared living and sleeping zone", "number": 1, "position_hint": "main central and window-side portion of the apartment" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "open kitchen service zone", "number": 2, "position_hint": "along one side wall near the entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shower bathroom wet zone", "number": 3, "position_hint": "entrance-side enclosed corner opposite the kitchenette" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 4, "position_hint": "inside the corridor-side entrance, below the raised main floor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main exterior window", "number": 5, "position_hint": "centered on the exterior wall at the far end of the main room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "apartment entrance door", "number": 6, "position_hint": "corridor-side wall opening into the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bathroom door", "number": 7, "position_hint": "between the threshold zone and enclosed bathroom" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "kitchen counter and sink", "number": 8, "position_hint": "linear counter against the kitchen side wall" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "built-in stovetop", "number": 9, "position_hint": "set into the kitchen counter beside the sink" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "refrigerator", "number": 10, "position_hint": "at the outer end of the kitchenette near the main room" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "shower fixture", "number": 11, "position_hint": "far corner of the bathroom wet zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "toilet", "number": 12, "position_hint": "inside the bathroom beside the plumbing wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "single bed", "number": 13, "position_hint": "along one long wall near the exterior window" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "compact sofa", "number": 14, "position_hint": "central living portion of the main room facing the television" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "television and low console", "number": 15, "position_hint": "against the wall opposite the sofa" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "small two-person table", "number": 16, "position_hint": "between the open kitchen and living seating area" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "wardrobe", "number": 17, "position_hint": "against the entrance-side wall of the main room" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "electronic entrance lock", "number": 18, "position_hint": "mounted at the apartment entrance door" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "television crime-news screen imagery", "number": 19, "position_hint": "contained entirely within the television display at number 15" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "coffee-making items", "number": 20, "position_hint": "temporarily arranged on the kitchen counter near number 8" } ], "camera_recommendations": [ { "bg_id": "L25B03", "camera_height": "eye-level seated-to-standing transition, approximately 1.3m", "camera_position": "near number 7 (bathroom door), facing diagonally across number 1 (shared living and sleeping zone) toward number 15 (television and console)", "framing_notes": "Keep number 15 prominent, retain open floor space in the center, and include number 14 at the frame edge to support the solitary post-shower reaction. Apply number 19 only as imagery contained inside the television screen.", "ignore_numbered_elements": [ 20 ], "lens_hint": "35mm moderate wide angle", "sub_location": "living_tv_zone", "use_numbered_elements": [ 1, 3, 7, 13, 14, 15, 16, 17, 19 ] }, { "bg_id": "L25B01", "camera_height": "eye-level seated, approximately 1.2m", "camera_position": "near number 14 (compact sofa), facing directly toward number 15 (television and console) along the main-room axis", "framing_notes": "Use a television-focused composition with number 15 dominant and number 14 or number 16 as restrained foreground context. Number 19 must remain entirely within the television screen.", "ignore_numbered_elements": [ 20 ], "lens_hint": "50mm normal lens", "sub_location": "television_viewing_area", "use_numbered_elements": [ 1, 5, 14, 15, 16, 19 ] }, { "bg_id": "L25B02", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 5 (main exterior window), facing diagonally across number 1 (shared zone) toward number 2 (open kitchen), with number 15 (television) remaining visible to one side", "framing_notes": "Show the uninterrupted connection between the living and kitchen areas. Include numbers 8, 9, 10, and 20 around the kitchen counter while retaining number 15 and seating in the same composition; number 19 stays inside the television screen.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "connected_living_kitchen", "use_numbered_elements": [ 1, 2, 4, 5, 6, 8, 9, 10, 14, 15, 16, 18, 19, 20 ] } ], "scale_guideline": "Treat the apartment as a single-level studio unit; the containing building's total storey count is not specified. A compact footprint of roughly 20–35 square metres and an interior height around 2.3–2.5 metres are typical for this regional mid-2010s housing type, but neither measurement is stated in the text. Use one main exterior window, one entrance door, and one internal bathroom door as the conservative opening arrangement shown by this plan, with a small raised-floor transition at the entrance.", "applied_shots": [ "S31_Shot3", "S52_Shot4", "S52_Shot5", "S52_Shot8" ], "group_id": "bg_studio_apartment", "depends_on_fp": [] }, "fp_l26_deputy_chief_office": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic 2D architectural floor plan diagram of a mid-2010s executive office in a regional government institution. Show a simple rectangular office with the exterior facade along the north side and an internal corridor along the south side. Use a formal hierarchical layout typical of the period and region: a large executive desk near the north windows facing south, a high-backed executive chair behind it, two visitor chairs facing the desk, a compact side meeting group with a sofa and low rectangular table, a wall-mounted flat-panel television on the east wall, and a low storage credenza beneath or beside the television. Keep a direct unobstructed circulation path from the south corridor door to the desk and visitor seating. Divide the office into four clearly readable areas using single flat pastel solid fills: number 1 executive work zone in pale blue, number 2 visitor meeting zone in pale yellow, number 3 entrance threshold zone in pale beige, and number 4 media and storage zone in pale cyan. Use each color consistently with no blending. Draw number 5 as a south-wall door with a standard door leaf and swing arc. Draw numbers 6 and 7 as two double-parallel-line window symbols in the north wall. Draw number 8 as a large simple rectangular desk, number 9 as the executive chair, number 10 as a symmetrical pair of visitor chairs, number 11 as a low rectangular credenza, number 12 as a sofa glyph with cushion divisions, number 13 as a low rectangular meeting table, and number 14 as a thin wall-mounted television rectangle. Place one small white circle containing its unique black number beside each numbered area, opening, fixture, and furniture unit; every number from 1 through 14 must appear exactly once. Area names may appear only as the generic labels Private Zone, Shared Zone, Threshold Zone, and Service Zone. Include no legend and no other text or annotations. A small north arrow with the letter N is allowed in one corner. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols, generous spacing, and high legibility. This must be a flat diagram only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered lighting, no lighting effects, no textured surfaces, and no material rendering. Do not draw people, event actions, television content, screen glow, camera icons, view cones, movement arrows, or transient plot-state cues.", "key_elements": [ "Rectangular executive office with a formal hierarchical layout", "Private executive work zone at the window end", "Visitor meeting zone in front of and beside the desk", "Direct corridor doorway with an unobstructed exit path", "Two exterior windows providing daytime illumination", "Large executive desk and high-backed chair", "Two desk-facing visitor chairs", "Side sofa and low meeting table", "Wall-mounted television visible from the desk and visitor seating", "Low storage credenza beneath the media wall" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "executive work zone", "number": 1, "position_hint": "north end of the office around the executive desk" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "visitor meeting zone", "number": 2, "position_hint": "center and southwest portion of the office" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 3, "position_hint": "south end immediately inside the corridor door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "media and storage zone", "number": 4, "position_hint": "east wall beside the visitor meeting zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "corridor door", "number": 5, "position_hint": "south wall near the southeast corner" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west exterior window", "number": 6, "position_hint": "north wall, left half of the exterior facade" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east exterior window", "number": 7, "position_hint": "north wall, right half of the exterior facade" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "executive desk", "number": 8, "position_hint": "north-central office, facing south toward visitors and entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "executive chair", "number": 9, "position_hint": "north side of the executive desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "pair of visitor chairs", "number": 10, "position_hint": "south side of the executive desk, facing the executive chair" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "storage credenza", "number": 11, "position_hint": "east wall below and beside the television" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "visitor sofa", "number": 12, "position_hint": "west wall within the visitor meeting zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low meeting table", "number": 13, "position_hint": "directly east of the visitor sofa" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "wall-mounted television", "number": 14, "position_hint": "east wall, oriented toward the desk and visitor seating" } ], "camera_recommendations": [ { "bg_id": "L26B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 5 (corridor door), facing diagonally across number 2 (visitor meeting zone) toward number 8 (executive desk) and number 14 (television)", "framing_notes": "Frame the executive desk and visitor seating as a tense hierarchical arrangement while keeping the television clearly visible on the side wall; the exterior windows may remain peripheral.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "deputy_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 8, 9, 10, 12, 13, 14 ] }, { "bg_id": "L26B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "from the visitor side of number 8 (executive desk), facing diagonally toward number 9 (executive chair), with number 5 (corridor door) retained along the side of the composition", "framing_notes": "Preserve a clear path between the desk and doorway for the abrupt exit; include the bright window side and enough visitor seating for seated and standing confrontations.", "ignore_numbered_elements": [], "lens_hint": "32mm moderate wide angle", "sub_location": "deputy_chief_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] } ], "scale_guideline": "The office occupies one level within a multi-storey government building; the building's storey count is not specified, while a typical institutional floor-to-floor height for this period and region is about 3 to 4 metres. A private executive office of this hierarchy is typically about 25 to 40 square metres, large enough for a formal desk area and a separate compact visitor seating group. The plan uses one corridor door and two exterior windows, a typical conservative opening arrangement rather than a count stated explicitly in the scenes, and it contains no internal stairs or other multi-storey vertical elements.", "applied_shots": [ "S32_Shot4", "S32_Shot5", "S59_Shot1", "S59_Shot6", "S61_Shot4", "S61_Shot6", "S61_Shot7" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l28_prosecution_front": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan diagram of a mid-2010s urban public legal-office frontage in South Korea. Show only clean geometric plan symbols with uniform single-weight black outlines on a white or off-white background. The building occupies a shallow strip along the north edge; a recessed public entrance aligns with a straight internal vehicle drive running south to a controlled main gate. Place regular ground-floor window openings along the facade, a compact rectangular security booth just inside the gate, a separate narrow pedestrian gate, a continuous perimeter fence, a broad public pedestrian apron outside the fence, and a street approach lane along the south edge. Use standard top-down opening symbols: door leaves with simple swing arcs where applicable, gate leaves as plain hinged lines with arcs, and windows as double parallel lines in the wall. Reflect the orderly geometry of a contemporary regional government compound: formal central vehicle access, separated pedestrian access, repetitive facade bays, and an open paved frontage suitable for public gathering.\n\nApply one consistent flat pastel solid fill per area: Private Zone building frontage strip in pale blue, Service Zone internal entry drive in pale cyan, Shared Zone public pedestrian apron in pale yellow, Utility Zone street approach lane in pale gray, and Threshold Zone fence and gate band in pale beige. Larger generic area labels may read only: Private Zone, Service Zone, Shared Zone, Utility Zone, and Threshold Zone. Add small circular markers with black numbers exactly once for base elements 1 through 10 only: 1 building frontage strip, 2 internal entry drive, 3 public pedestrian apron, 4 street approach lane, 5 perimeter fence line, 6 main vehicle gate, 7 pedestrian gate, 8 recessed entrance doors, 9 ground-floor window bank, 10 security booth. Do not draw markers 11, 12, or 13 and do not depict the approaching car, protest gathering, or protest placards because they are transient overlay content. No other labels, captions, legends, annotations, camera icons, field-of-view cones, or arrows; a small north arrow marked N is allowed in one corner.\n\nStrictly flat 2D plan view only. No 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, blending, drop shadow, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering. Use flat pastel solid fills only, with no decorative illustration and no people or vehicles.", "key_elements": [ "Shallow government-building facade strip along the north edge", "Straight internal vehicle drive aligned with the main gate", "Wide public pedestrian apron suitable for a small gathering", "Street-side vehicle approach lane", "Controlled perimeter fence with separate vehicle and pedestrian openings", "Recessed public entrance and regular ground-floor window bays", "Compact security booth beside the main vehicle gate", "Transient approaching car assigned to the vehicle-entry background only", "Transient protest gathering and placards assigned to the noon frontage background only" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "building frontage strip", "number": 1, "position_hint": "north edge of plan, spanning the government-building facade" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "internal entry drive", "number": 2, "position_hint": "central north-south lane between the main gate and building entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "public pedestrian apron", "number": 3, "position_hint": "south frontage, beside the vehicle gate and outside the controlled boundary" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "street approach lane", "number": 4, "position_hint": "along the south edge, parallel to the public frontage" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "perimeter fence line", "number": 5, "position_hint": "east-west boundary between the public apron and controlled compound" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main vehicle gate", "number": 6, "position_hint": "center of the perimeter fence, aligned with the internal entry drive" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "pedestrian gate", "number": 7, "position_hint": "in the perimeter fence immediately east of the main vehicle gate" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "recessed entrance doors", "number": 8, "position_hint": "north facade, centered on the internal entry drive" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "ground-floor window bank", "number": 9, "position_hint": "north facade, arranged in regular bays on both sides of the entrance" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "security booth", "number": 10, "position_hint": "inside the fence beside the east side of the main vehicle gate" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "approaching sedan", "number": 11, "position_hint": "on the street approach lane, aligned to turn through the main vehicle gate" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "area", "label": "small protest gathering footprint", "number": 12, "position_hint": "spread across the public pedestrian apron in front of the gate" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "protest placards", "number": 13, "position_hint": "carried within the protest gathering on the public pedestrian apron" } ], "camera_recommendations": [ { "bg_id": "L28B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 4 (street approach lane), facing diagonally through number 6 (main vehicle gate) toward number 2 (internal entry drive) and number 8 (recessed entrance doors)", "framing_notes": "Keep the gate and driveway axis prominent, with number 11 approaching from the street and passing through the main gate; retain enough facade context to establish the institutional entrance.", "ignore_numbered_elements": [ 12, 13 ], "lens_hint": "35mm moderate wide angle", "sub_location": "prosecution_front_gate", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ] }, { "bg_id": "L28B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 4 (street approach lane), facing across number 3 (public pedestrian apron) toward number 6 (main vehicle gate), number 8 (recessed entrance doors), and number 1 (building frontage strip)", "framing_notes": "Give number 12 and number 13 clear foreground and midground space on the pedestrian apron while preserving the gate and government-building frontage behind them.", "ignore_numbered_elements": [ 11 ], "lens_hint": "32mm wide angle", "sub_location": "prosecution_front_gate", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13 ] } ], "scale_guideline": "The institutional building's storey count is not specified; a mid-sized urban public office of this regional and period type is typically about five to ten storeys, with typical office storeys around 3 to 4 m high. Its frontage should read as a broad civic block rather than a small detached office, while the plan scope shows only the shallow facade edge, gate, and forecourt. The street-facing elevation should have one principal ground-level public entrance and repetitive window bays on the office floors; exact bay counts are not given. The fence, vehicle gate, pedestrian gate, and security booth are single-level elements, with no major vertical circulation element visible in this exterior plan scope.", "applied_shots": [ "S34_Shot2", "S65_Shot2", "S65_Shot3" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l29_wonseop_office": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic 2D architectural floor plan diagram of a bright mid-2010s Korean regional public-sector legal office. Show one simple rectangular office subdivided into four clearly bounded functional areas: a pale blue Work Zone in the east half, a pale yellow Visitor Zone in the west-central half, a pale cyan Records Zone along the northeast edge, and a pale beige Threshold Zone at the southwest entrance. Use each zone color as a single solid pastel fill, consistent across the diagram. Surrounding corridor or exterior margins may use flat pale gray. Draw all walls, furniture, fixtures, and openings with clean single-weight black outlines on a white or off-white background, using geometric CAD-style plan symbols only. Place an inward-swinging corridor entrance door on the south wall near the southwest corner, represented by a line and door-swing arc. Place a broad exterior window band on the north wall, represented by double parallel lines within the wall. In the Work Zone, place a large rectangular prosecutor work desk on the east side, oriented toward the entrance and visitor area, with one task chair behind it and two simple guest-chair glyphs opposite it. Add built-in records shelving along the northeast wall beside and behind the desk. In the Visitor Zone, place two long rectangular sofas directly facing one another across a low rectangular visitor table; show simple cushion divisions in both sofa symbols. Keep circulation clear between the entrance, visitor seating, desk, and records shelving, reflecting a practical mid-2010s regional government office layout centered on paper casework and formal seated meetings. Add small circular markers with unique black numbers exactly once for base elements 1 through 13: 1 Work Zone, 2 Visitor Zone, 3 Records Zone, 4 Threshold Zone, 5 corridor entrance door, 6 exterior window band, 7 prosecutor work desk, 8 task chair, 9 built-in records shelving, 10 visitor table, 11 north visitor sofa, 12 south visitor sofa, and 13 desk guest chairs. Do not draw marker 14 or the temporary stacks of active case files because they belong to a separate state overlay. Minimal text only: the generic area labels Work Zone, Visitor Zone, Records Zone, and Threshold Zone may appear in larger plain lettering inside their respective colored areas; no other labels, legends, annotations, dimensions, camera icons, view cones, arrows, people, loose documents, or plot-state marks. A small north arrow with the letter N may appear in one corner. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadows, no shading, no gradients, no blending, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering.", "key_elements": [ "Rectangular mid-2010s regional public-sector legal office divided into work, visitor, records, and entrance-threshold zones", "Private work desk placed beside the records area with a task chair and two guest chairs", "Shared visitor arrangement with two facing sofas and a low rectangular table", "Built-in records shelving along the wall near the prosecutor's desk", "Corridor entrance and broad exterior window band supporting a bright daytime office", "Temporary stacks of active case files treated only as a separate state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "work zone", "number": 1, "position_hint": "east half of the office beside the exterior wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "visitor zone", "number": 2, "position_hint": "west-central half of the office between the entrance and work zone" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "records zone", "number": 3, "position_hint": "northeast edge of the office behind the work desk" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "threshold zone", "number": 4, "position_hint": "southwest corner immediately inside the corridor entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "corridor entrance door", "number": 5, "position_hint": "south wall near the southwest corner, swinging inward into the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window band", "number": 6, "position_hint": "north wall spanning the work and visitor sides" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "prosecutor work desk", "number": 7, "position_hint": "east side of the work zone, oriented toward the visitor zone and entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "task chair", "number": 8, "position_hint": "east side of the work desk, facing west toward visitors" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in records shelving", "number": 9, "position_hint": "northeast wall behind and beside the work desk" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "visitor table", "number": 10, "position_hint": "center of the visitor zone between the facing sofas" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "north visitor sofa", "number": 11, "position_hint": "north side of the visitor table, facing south" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "south visitor sofa", "number": 12, "position_hint": "south side of the visitor table, facing north" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "desk guest chairs", "number": 13, "position_hint": "paired on the west side of the work desk, facing the task chair" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "stacks of active case files", "number": 14, "position_hint": "temporarily spread across the top of the work desk during document review" } ], "camera_recommendations": [ { "bg_id": "L29B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 5 (corridor entrance), facing diagonally across number 2 (visitor zone) toward number 7 (work desk), with number 9 (built-in records shelving) and number 6 (exterior window band) beyond", "framing_notes": "Keep numbers 10, 11, and 12 prominent for seated conversations; retain number 7 and number 9 in the deeper background, and allow number 14 to appear on the desk for the document-review state.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "prosecutor_office", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ] } ], "scale_guideline": "The office occupies one level within a multi-storey regional government building; a host building of roughly five to ten storeys is typical for this use, but the text does not specify its actual storey count. A typical public-sector office of this arrangement has a footprint of about 35–55 square metres and a floor-to-floor height around 3.3–4.0 metres; these are conservative regional norms rather than stated measurements. The text does not specify opening counts, so use a conventional single corridor entrance and a modest exterior window band as diagrammed. No internal stair, major level change, tank, or other vertical element belongs within this office scope.", "applied_shots": [ "S35_Shot1", "S35_Shot7", "S35_Shot12", "S54_Shot5", "S54_Shot9", "S54_Shot14" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l47_interview_room": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan of a compact, narrow mid-2010s public-sector interview room. Use a simple rectangular room with its long axis north-south and a central plain rectangular questioning table oriented east-west. Place one simple top-down chair glyph on the north side of the table facing south and one matching chair glyph on the south side facing north, creating a controlled face-to-face questioning arrangement. Add one inward-swinging access door in the south wall near the southeast corner, shown with a standard line-and-arc door symbol. Divide the room into flat color-coded areas: Staff Zone at the north end in solid pale blue, Shared Zone around the central table in solid pale yellow, Interviewee Zone south of the table in solid pale cyan, and Threshold Zone immediately inside the door in solid pale beige. Use these colors consistently with hard boundaries, no blending. Draw single-weight black CAD-style outlines on a white or off-white background, using geometric plan symbols only. Place small circular markers with black numbers exactly once for numbers 1 through 9 according to the numbered element list. Area names may appear as the only larger internal text; add no legend, dimensions, object labels, notes, camera symbols, arrows, people, food, cups, envelopes, documents, or other transient objects. A small north arrow with the letter N may appear in one corner. Strict exclusions: no 3D, no isometric, no perspective, no axonometric view, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendered lighting, no textures, and no material rendering.", "key_elements": [ "Narrow rectangular interview room", "Central plain questioning table", "Two chairs directly opposite each other", "Clearly separated staff and interviewee sides", "Compact entrance threshold with a single inward-swinging door", "Mid-2010s public-sector institutional room layout" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "compact interview room", "number": 1, "position_hint": "marker near the northwest inside corner, identifying the complete rectangular room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "staff zone", "number": 2, "position_hint": "north end of the room behind the staff chair" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared questioning zone", "number": 3, "position_hint": "center of the room surrounding the questioning table" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "interviewee zone", "number": 4, "position_hint": "south-central side of the table, opposite the staff zone" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 5, "position_hint": "southeast corner immediately inside the door" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "plain questioning table", "number": 6, "position_hint": "center of the room, long axis east-west" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "staff chair", "number": 7, "position_hint": "north side of the central table, facing south" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "interviewee chair", "number": 8, "position_hint": "south side of the central table, facing north" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "single access door", "number": 9, "position_hint": "south wall near the southeast corner, swinging inward into the threshold zone" } ], "camera_recommendations": [ { "bg_id": "L47B01", "camera_height": "seated eye level, approximately 1.2m", "camera_position": "near the west wall of number 3 (Shared Zone), facing east across number 6 (plain questioning table) so number 7 (staff chair) and number 8 (interviewee chair) appear opposite each other", "framing_notes": "Emphasize the narrow room width and the controlled face-to-face arrangement around number 6; retain a partial view toward number 5 and number 9 to establish the single exit.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "interview_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "Treat this as one compact room on a single floor within a larger public building; the total building storey count and height are not specified. A footprint of roughly 8–14 square metres and a floor-to-ceiling height around 2.7–3.2 metres are typical for this mid-2010s institutional room type, not measurements stated by the text. One controlled access door is typical and is shown, while no exterior window is required by the scene evidence.", "applied_shots": [ "S53_Shot1", "S53_Shot3", "S53_Shot10", "S57_Shot1", "S57_Shot7" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l52_elevator": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic floor plan diagram of a compact mid-2010s public-office elevator landing. Show a rectangular elevator car with a centered two-panel sliding doorway on its south wall, a narrow threshold directly outside it, and a short visible section of institutional office corridor beyond. Use layout conventions appropriate to a mid-2010s public administrative building: compact passenger elevator proportions, a side-wall button panel close to the doorway, a fixed handrail along the rear wall, and a small floor-indicator fixture aligned with the doorway wall. Represent the sliding doorway as two simple paired panels within the wall opening, the control panel as a narrow wall-mounted rectangle, and the handrail as a thin fixed linear glyph. Use single-weight black architectural CAD outlines on a white or off-white background and geometric plan symbols only. Apply one consistent flat pastel solid fill per area: elevator car interior pale blue, doorway threshold pale beige, office corridor pale yellow, and the narrow control-fixture wall strip pale cyan. Place exactly one small white circle with a black number at each persistent element: 1 elevator car area, 2 sliding doorway, 3 control panel, 4 doorway threshold area, 5 office corridor area, 6 rear-wall handrail, and 7 floor indicator. The numbers must be unique and each must appear exactly once. Optional larger generic area labels may read Elevator Car, Threshold Zone, and Corridor Zone; include no other text or annotations. Do not draw people, event actions, camera icons, view cones, or movement arrows. Strictly flat 2D plan view only: no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered lighting, no textured surfaces, and no material rendering.", "key_elements": [ "Compact rectangular institutional elevator car", "Center-opening sliding elevator doorway", "Side-wall elevator control panel", "Narrow doorway threshold", "Visible public-office corridor beyond the doors", "Fixed rear-wall handrail", "Door-frame floor indicator" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "elevator car", "number": 1, "position_hint": "central rectangular enclosed area" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "sliding elevator doorway", "number": 2, "position_hint": "center of south wall, opening toward corridor" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "elevator control panel", "number": 3, "position_hint": "east side wall near sliding doorway" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "doorway threshold", "number": 4, "position_hint": "narrow band immediately south of sliding doorway" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "office corridor", "number": 5, "position_hint": "visible strip beyond doorway threshold" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "fixed handrail", "number": 6, "position_hint": "along north rear wall of elevator car" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "floor indicator", "number": 7, "position_hint": "centered at the doorway wall line above the opening, represented by a simple plan marker" } ], "camera_recommendations": [ { "bg_id": "L52B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "inside number 1 near the rear wall and number 6, facing number 2 across number 4 toward number 5, with number 3 along the side wall", "framing_notes": "Frame the elevator interior and both occupants while the sliding doorway is open; include the corridor beyond number 4, keep the control panel visible at the side, and allow a centered composition for the later door-closing beat.", "ignore_numbered_elements": [], "lens_hint": "28–35 mm moderate wide angle", "sub_location": "elevator_car", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7 ] } ], "scale_guideline": "This elevator belongs to a multi-storey public office building, but the storey count and total building height are not specified; a typical institutional storey height for the period is approximately 3–4 m. The elevator car should use a typical compact passenger-car footprint of roughly 1.6–2.2 m per side, with a doorway approximately 0.9–1.2 m wide; these are typical ranges rather than text-specified measurements. The elevator serves multiple levels through the same vertical shaft, while this plan depicts only one car and one corridor landing level.", "applied_shots": [ "S62_Shot2", "S62_Shot6" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l54_seminar_room": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic 2D architectural floor plan diagram of a mid-2010s government-office seminar room. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only, and crisp orthogonal room geometry. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered appearance, lighting effects, textured surfaces, or material rendering. Show a rectangular seminar room arranged according to a restrained mid-2010s institutional layout: a front presentation zone along the north wall, four orderly rows of five audience chairs facing north for twenty participants, a clear rear and side circulation aisle, and one rear-side entrance door. Apply single flat pastel solid fills with no blending: Audience Zone in pale yellow, Presentation Zone in pale beige, and Threshold Zone in pale gray. The short generic area labels Audience Zone, Presentation Zone, and Threshold Zone may appear as the only large text. Draw the audience chairs as simple top-down rectangular seat glyphs grouped into four rows; draw the podium as a simple rectangle at the front-left; draw the microphone as a tiny fixed top-down symbol on the podium; draw the projection screen as a thin centered rectangle against the north wall; draw the rear entrance with a standard door leaf and swing arc; and draw its small observation panel as a simple inset double-line opening. Place one small numbered circle with a black numeral exactly once for each base-layer element: 1 in the Audience Zone, 2 in the Presentation Zone, 3 in the Threshold Zone, 4 beside the grouped audience seating rows, 5 on the podium, 6 on the podium microphone, 7 on the projection screen, 8 at the entrance door, and 9 at the door observation panel. Do not draw markers 10, 11, or 12 and do not depict projected title content, a projected photograph, room-darkening effects, people, movable personal items, event cues, camera icons, field-of-view cones, dimensions, legends, or annotations. Apart from the three generic area labels, the numbered circles, and an optional small north arrow marked N in one corner, include no text inside the diagram. Use flat pastel solid color only, with no gradients, no drop shadows, and no decorative styling.", "key_elements": [ "Rectangular government-office seminar room", "Front presentation zone with podium and microphone", "Wall-mounted projection screen", "Four orderly audience seating rows for twenty participants", "Rear circulation and entrance threshold", "Entrance door with small observation panel", "Separate transient projection states for the hearing title and black-and-white photograph" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Audience zone", "number": 1, "position_hint": "central and rear portion of the seminar room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Presentation zone", "number": 2, "position_hint": "north front of the seminar room beneath the projection screen" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Threshold and circulation zone", "number": 3, "position_hint": "south rear edge and side aisle connecting the entrance to the seating" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Audience seating rows", "number": 4, "position_hint": "four aligned rows in the audience zone, oriented toward the north screen" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Podium", "number": 5, "position_hint": "front-left side of the presentation zone, facing the audience" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Podium microphone", "number": 6, "position_hint": "fixed on top of the podium at the front-left presentation position" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Projection screen", "number": 7, "position_hint": "centered on the north wall behind the presentation zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Rear entrance door", "number": 8, "position_hint": "south wall near the rear side aisle, swinging inward toward the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Door observation panel", "number": 9, "position_hint": "small glazed opening within the rear entrance door" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Hearing title projection", "number": 10, "position_hint": "projected onto the front screen during the lit committee session" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "Black-and-white photograph projection", "number": 11, "position_hint": "projected onto the front screen during the later presentation" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "area", "label": "Darkened room state", "number": 12, "position_hint": "applies across the seminar room during the photograph presentation" } ], "camera_recommendations": [ { "bg_id": "L54B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 8 (rear entrance door), facing diagonally across number 1 (audience zone) toward number 5 (podium), number 6 (microphone), and number 7 (projection screen)", "framing_notes": "Show the occupied seating rows at number 4 in the foreground and middle ground, with the speaker position and hearing-title projection clearly visible at the front.", "ignore_numbered_elements": [ 11, 12 ], "lens_hint": "35mm moderate wide angle", "sub_location": "seminar_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] }, { "bg_id": "L54B02", "camera_height": "eye-level seated-to-standing perspective, approximately 1.5 m", "camera_position": "near the front-side edge of number 2 (presentation zone), looking diagonally across number 4 (audience seating rows) while retaining number 5 (podium) and number 7 (projection screen) in frame", "framing_notes": "Emphasize committee members' faces under dim projection light while keeping the projected black-and-white photograph confined to the screen surface.", "ignore_numbered_elements": [ 10 ], "lens_hint": "40mm natural perspective", "sub_location": "seminar_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12 ] } ], "scale_guideline": "This is one seminar room within a multi-storey government office building; the building's total storey count is not specified, while a typical institutional floor-to-floor height is approximately 3.3–4.0 m. A room accommodating twenty seated committee members plus a presentation zone is typically about 70–120 square metres, with a moderately high clear ceiling suitable for projection. The plan uses one rear access door with one small observation panel, as supported by the scene, while exterior window counts are not established.", "applied_shots": [ "S66_Shot2", "S66_Shot3", "S68_Shot1", "S68_Shot2" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l55_seminar_corridor": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a mid-2010s public legal-office corridor segment. Show a straight shared corridor along one side of a continuous wall, a partial seminar-room interior on the opposite side, and an uncluttered waiting-clearance area directly outside the seminar-room entrance. Use layout conventions appropriate to a contemporary South Korean institutional office: a practical corridor width, a solid inward-swinging seminar-room door, and a narrow vertical viewing pane inset into the door. Draw the door with a standard plan-view leaf and swing arc; represent the inset viewing pane as a small outlined opening within the door glyph. Use single-weight black outlines on a white or off-white background and simple geometric CAD-style symbols only. Fill number 1, the shared corridor zone, with solid pale yellow; fill number 2, the seminar-room zone, with solid pale blue; fill number 3, the threshold and waiting-clearance zone, with solid pale beige. Keep each fill completely flat and consistent, with no blending. Place exactly one small white circle with a black number at each persistent element: 1 in the corridor segment, 2 in the partial seminar room, 3 in the waiting clearance, 4 beside the seminar-room door, and 5 beside the narrow viewing pane inset into that door. Generic area labels such as Shared Zone, Private Zone, and Threshold Zone may appear in larger text, but include no other words or annotations. Do not include people, movable event objects, plot-state cues, camera symbols, field-of-view cones, or directional camera arrows. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, material rendering, drop shadows, decorative illustration, or furniture viewed in perspective.", "key_elements": [ "Straight institutional corridor segment", "Partial seminar-room interior beyond the corridor wall", "Clear waiting area outside the seminar room", "Closed inward-swinging seminar-room door", "Narrow vertical viewing window inset into the door" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "corridor segment", "number": 1, "position_hint": "shared circulation zone extending across the corridor side of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "seminar room", "number": 2, "position_hint": "partial room area beyond the corridor-side wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "waiting clearance", "number": 3, "position_hint": "threshold zone directly outside the seminar-room door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "seminar-room door", "number": 4, "position_hint": "corridor wall between the waiting clearance and seminar room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "narrow viewing window", "number": 5, "position_hint": "narrow vertical pane inset into the seminar-room door" } ], "camera_recommendations": [ { "bg_id": "L55B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "within number 1 (corridor), near number 3 (waiting clearance), facing number 4 (closed seminar-room door) and concentrating on number 5 (narrow viewing window), with a limited glimpse toward number 2 (seminar room) through the pane", "framing_notes": "Frame the closed door nearly front-on and make the narrow viewing window prominent; retain enough surrounding corridor wall and waiting clearance to establish the institutional location.", "ignore_numbered_elements": [], "lens_hint": "50mm normal lens", "sub_location": "seminar_room_corridor", "use_numbered_elements": [ 1, 2, 3, 4, 5 ] } ], "scale_guideline": "This plan represents one interior segment of a multi-storey public office building; the exact storey count is not specified, while roughly four to ten storeys and floor-to-floor heights around 3 to 4 m are typical for this regional building type. The corridor is typically about 2 to 3 m wide, and the adjoining seminar room should be large enough for approximately twenty seated participants, although its complete footprint is outside this plan's scope. The depicted corridor-facing boundary has one seminar-room door containing one narrow viewing pane. No stair, lift, atrium, or other multi-storey vertical element is included within this cropped segment.", "applied_shots": [ "S67_Shot1" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l56_briefing_room": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a mid-2010s institutional press briefing room. Use a clean rectangular room shell with single-weight black outlines on a white or off-white background, geometric plan symbols only, and clear circulation spacing. This must be a strictly flat 2D plan view, not 3D, not isometric, not perspective, not axonometric, with no depth, shadows, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering. Orient the front presentation end to the north and add only a small north arrow in one corner. Divide the room into solid flat pastel zones with no blending: the north presentation platform is pale yellow and may carry the generic area label 'Presentation Zone'; the central reporter seating zone is pale blue and may carry 'Seating Zone'; the two long side camera lanes are pale cyan and may carry 'Camera Lanes'; the rear standing zone is pale gray and may carry 'Rear Standing Zone'; the south-center entrance threshold is pale beige and may carry 'Threshold Zone'. Show a low rectangular presentation platform across most of the north end, a centered top-down podium symbol facing south, and a thin fixed rectangular backdrop panel against the north wall. In the central zone, show orderly transverse rows of simple rectangular reporter desks with matching top-down chair glyphs facing north, leaving uncluttered side camera lanes. Keep an open standing band behind the final chair row. Place a double-leaf entrance at the center of the south wall using straight door leaves and standard swing arcs. Use small white circles with black numbers as the only object annotations, and place every number exactly once: 1 at the room shell, 2 on the presentation platform, 3 on the podium, 4 on the backdrop panel, 5 in the reporter seating zone, 6 on the desk-row group, 7 on the chair-row group, 8 in the left camera lane, 9 in the right camera lane, 10 in the rear standing zone, 11 in the entrance threshold zone, and 12 at the rear double-leaf door. Apart from the permitted generic zone labels, north arrow, and numbered circles, include no text or annotations. Exclude all transient event content from this base diagram: no people, laptops, portable cameras, flash bursts, camera icons, field-of-view cones, or camera-position arrows, and do not draw numbered circles beyond 1 through 12.", "key_elements": [ "Rectangular institutional press room shell", "Low presentation platform at the north front", "Centered podium and fixed backdrop panel", "Central reporter seating zone with aligned desks and chairs", "Clear camera lanes along both sides", "Rear standing zone behind the seated reporters", "Rear threshold and double-leaf entrance", "Transient portable press cameras confined to the camera lanes", "Transient laptops on reporter desks", "Transient repeated camera-flash effects" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "press room shell", "number": 1, "position_hint": "rectangular perimeter enclosing the full plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "presentation platform", "number": 2, "position_hint": "north end of the room, spanning most of the front wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "podium", "number": 3, "position_hint": "center of the presentation platform, facing south toward reporters" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "backdrop panel", "number": 4, "position_hint": "north wall directly behind the podium" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "reporter seating zone", "number": 5, "position_hint": "central portion of the room between the platform and rear standing zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "reporter desk rows", "number": 6, "position_hint": "aligned transverse rows within the central seating zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "reporter chair rows", "number": 7, "position_hint": "south side of each reporter desk row, facing the podium" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "left camera lane", "number": 8, "position_hint": "west side of the reporter seating zone, running toward the platform" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "right camera lane", "number": 9, "position_hint": "east side of the reporter seating zone, running toward the platform" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear standing zone", "number": 10, "position_hint": "south side of the room behind the reporter chair rows" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 11, "position_hint": "south-center edge of the rear standing zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear double-leaf door", "number": 12, "position_hint": "center of the south wall opening into the threshold zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "portable press cameras", "number": 13, "position_hint": "temporarily positioned in the left and right camera lanes during the active briefing" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "open reporter laptops", "number": 14, "position_hint": "temporarily placed across the reporter desk rows during the active briefing" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "repeated camera flashes", "number": 15, "position_hint": "momentary flash bursts directed from the reporter and camera lanes toward the podium" } ], "camera_recommendations": [ { "bg_id": "L56B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 10 (rear standing zone), facing toward number 3 (podium) and number 4 (backdrop panel) across number 5 (reporter seating zone)", "framing_notes": "Frame number 3 prominently at the front, with numbers 6 and 7 forming converging foreground rows. Include portions of numbers 8 and 9 for press cameras, number 14 on the reporter desks, and number 15 around the podium sightline.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "briefing_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 13, 14, 15 ] } ], "scale_guideline": "This plan covers one large briefing room within a larger public-office building; the building storey count is not specified, though several storeys and roughly 3–4 m floor-to-floor are typical for this institutional type. A room footprint around 10–15 m long by 7–10 m wide is a typical conservative range for podium space, several reporter rows, two camera lanes, and a rear standing zone; exact dimensions are not stated. The schematic uses one rear double-leaf entrance as a typical circulation assumption, while exterior window count is unspecified and may be limited or zero in an enclosed press room. The front platform is a low single-level rise contained entirely within the room, with no stair run or other full-height vertical element indicated.", "applied_shots": [ "S69_Shot4", "S69_Shot6" ], "group_id": "bg_prosecution_office", "depends_on_fp": [] }, "fp_l32_investigation_suite": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2010s correctional investigation and interview suite in a South Korean institutional layout convention. Use clean single-weight black CAD-like outlines on a white or off-white background, geometric plan symbols only, and minimal text. The suite is a simple rectangle divided into a large investigation room across the west and north, a narrow private interview room on the east, and a shared secure circulation vestibule along the south. Fill the investigation room with one solid pale yellow area color and place the generic area text Shared Zone inside it. Fill the interview room with one solid pale blue area color and place the generic area text Private Zone inside it. Fill the circulation vestibule with one solid pale beige area color and place the generic area text Threshold Zone inside it. Use each area color consistently with hard edges and no blending. Show one controlled entrance door in the south exterior wall of the vestibule, one door from the vestibule into the investigation room, and one door from the vestibule into the interview room; represent every door with a simple wall opening, leaf line, and swing arc. In the large investigation room, place one plain rectangular interrogation table near the center with generous empty circulation around it, one suspect chair on its north side, two investigator chairs on its south side, one observer chair set back behind the investigators to the southwest, and one guard chair set back near the room door to the southeast. In the narrow interview room, place one small rectangular table with two chairs directly facing each other across it. Represent all furniture as simple top-down symbolic glyphs without decorative detail. Draw small white circles with black numbers 1 through 13, each number unique and appearing exactly once, positioned on the corresponding structural area, opening, or furniture item. Do not draw number 14, the cigarette pack and lighter, or any other transient object or plot-state cue on this base diagram. Apart from the three generic zone labels, the numbered circles, and an optional small north arrow marked N in one corner, include no text or annotations. Do not include camera symbols, view cones, people, documents, event cues, or loose props. Strictly exclude 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered effects, lighting effects, textured surfaces, and material rendering.", "key_elements": [ "Large investigation room with a lone central interrogation table", "Narrow adjoining interview room for two-person questioning", "Shared secure circulation vestibule", "Separate controlled doors for both questioning rooms", "Persistent seating arrangement for suspect, investigators, observer, and guard", "Transient cigarette pack and lighter reserved for the per-background overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "investigation room", "number": 1, "position_hint": "large western and northern portion of the suite" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "interview room", "number": 2, "position_hint": "narrow eastern room adjoining the investigation room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "circulation vestibule", "number": 3, "position_hint": "southern circulation strip serving both rooms" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "suite entrance door", "number": 4, "position_hint": "south wall of the circulation vestibule" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "investigation room door", "number": 5, "position_hint": "between the vestibule and southwest side of the investigation room" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "interview room door", "number": 6, "position_hint": "between the vestibule and south side of the interview room" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "interrogation table", "number": 7, "position_hint": "center of the investigation room with broad circulation around it" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "suspect chair", "number": 8, "position_hint": "north side of the interrogation table, facing south" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "investigator chair pair", "number": 9, "position_hint": "south side of the interrogation table, facing the suspect chair" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "observer chair", "number": 10, "position_hint": "southwest rear of the investigation room, behind the investigators" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "guard chair", "number": 11, "position_hint": "southeast rear of the investigation room, near the controlled door" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "interview table", "number": 12, "position_hint": "center of the narrow interview room" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "interview chair pair", "number": 13, "position_hint": "opposite long sides of the interview table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "cigarette pack and lighter", "number": 14, "position_hint": "on the interrogation table near the suspect side during active questioning" } ], "camera_recommendations": [ { "bg_id": "L32B02", "camera_height": "eye-level seated-to-standing transition, approximately 1.5m", "camera_position": "near number 5 (investigation room door), facing diagonally across number 7 (interrogation table) toward number 8 (suspect chair), with numbers 9, 10, and 11 arranged through the near and middle ground", "framing_notes": "Emphasize the direct confrontation across number 7, keep the rear observer seating readable, and include transient number 14 on the tabletop for the active questioning state.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "investigation_room", "use_numbered_elements": [ 1, 5, 7, 8, 9, 10, 11, 14 ] } ], "scale_guideline": "The suite occupies a single level within a larger correctional building; the overall building height is not specified, but two to four storeys with typical institutional storey heights of about 3 to 3.5 meters is conservative for this regional building type. A typical footprint for this compact two-room questioning suite is approximately 35 to 55 square meters, with the investigation room substantially larger than the interview room. Secure doors provide controlled access, while exterior windows are not established by the scene text. No internal stairs or other multi-level elements belong within the suite.", "applied_shots": [ "S37_Shot11", "S37_Shot21", "S55_Shot9" ], "group_id": "bg_correctional_facility", "depends_on_fp": [] }, "fp_l38_solitary_cell": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a narrow solitary cell using mid-2010s regional East Asian correctional-facility layout conventions. Show a simple elongated rectangular cell with thick enclosing walls, a small entrance threshold at the south end, a secure door centered in the south wall with a standard plan-view swing line opening outward, a fixed narrow sleeping platform running along the west wall, a tight clear circulation strip along the east side, and one high narrow secure window represented by double parallel lines in the north wall. Use single-weight black outlines on a white or off-white background and simple geometric CAD-style symbols only. Fill the main private cell area with one flat pale blue solid color and fill the entrance threshold with one flat pale beige solid color; use no other blended colors. The generic area labels 'Private Zone' and 'Threshold Zone' may appear in larger simple text. Place one small circular black-number marker exactly once for each base element: 1 in the main cell area, 2 in the entrance threshold, 3 at the secure door, 4 on the sleeping platform, and 5 at the high window. Only markers 1 through 5 may appear. Do not depict wall papers, written notes, a booklet, a concealed memo, people, guards, movable personal belongings, event cues, camera icons, field-of-view cones, dimensions, legends, or annotations. No text other than the two optional generic zone labels and an optional small north arrow. Strictly flat 2D plan view, not 3D, not isometric, not perspective, not axonometric. No depth, shadows, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, material rendering, decorative illustration, or drop shadows.", "key_elements": [ "Narrow rectangular solitary-cell footprint with very limited circulation", "Small entrance threshold at the south end", "Single secure outward-swinging entrance door", "Fixed narrow sleeping platform along the west wall", "One high narrow secure window on the north wall, following conservative period correctional-layout convention", "Wall-note cluster reserved for a transient per-background overlay", "Loose religious booklet and concealed review memo reserved for transient per-background overlays", "Flat pastel zoning with a pale blue private area and pale beige threshold area" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main cell area", "number": 1, "position_hint": "central and northern portion of the narrow rectangular cell" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 2, "position_hint": "small internal threshold zone centered against the south wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "secure entrance door", "number": 3, "position_hint": "south wall, opening outward from the entrance threshold" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "fixed sleeping platform", "number": 4, "position_hint": "long narrow platform against the west wall, extending through most of the cell" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "high secure window", "number": 5, "position_hint": "centered on the north wall opposite the entrance" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "wall-note cluster", "number": 6, "position_hint": "east wall opposite the sleeping platform, above the clear circulation strip" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "religious booklet", "number": 7, "position_hint": "held or placed above the southern half of the sleeping platform" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "concealed review memo", "number": 8, "position_hint": "inserted between the open pages of the religious booklet" } ], "camera_recommendations": [ { "bg_id": "L38B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "just outside number 3 (secure entrance door), facing through number 2 (entrance threshold) toward number 4 (sleeping platform), with the wall associated with number 6 (wall-note cluster) visible diagonally", "framing_notes": "Frame the narrow entrance and restricted circulation clearly; keep the sleeping platform and wall-note location visible beyond the doorway.", "ignore_numbered_elements": [ 7, 8 ], "lens_hint": "35mm wide angle", "sub_location": "solitary_cell_entrance", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ] }, { "bg_id": "L38B03", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "near number 2 (entrance threshold), facing diagonally across number 1 (main cell area) toward number 4 (sleeping platform), number 5 (high secure window), and number 6 (wall-note cluster)", "framing_notes": "Emphasize the quiet, confined room and provide a clear wall surface for the verse-note overlay; do not show the booklet or concealed memo.", "ignore_numbered_elements": [ 7, 8 ], "lens_hint": "32mm restrained wide angle", "sub_location": "solitary_cell_interior", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ] }, { "bg_id": "L38B02", "camera_height": "seated or bed-level, approximately 1.1m", "camera_position": "near the southeast side of number 1 (main cell area), facing number 4 (sleeping platform) with number 7 (booklet) and number 8 (concealed review memo) in the foreground and number 6 (wall-note cluster) behind", "framing_notes": "Use a close interior composition that makes the booklet and inserted memo readable as physical props while retaining enough of the sleeping platform and cell wall to establish location.", "ignore_numbered_elements": [], "lens_hint": "50mm normal lens", "sub_location": "solitary_cell_bedside", "use_numbered_elements": [ 1, 4, 5, 6, 7, 8 ] } ], "scale_guideline": "This plan covers one narrow cell on a single interior level; the overall correctional building storey count is not specified. A solitary cell of this regional and period type is typically about 2–2.5m wide and 3–4m deep, with a typical clear height of roughly 2.6–3m; these dimensions are conservative conventions rather than stated measurements. One secure entrance door is explicit, while the single high narrow window is a typical provision and is not directly specified in the scene text. No internal stair, mezzanine, or other multi-level element occurs within the cell.", "applied_shots": [ "S38_Shot2", "S38_Shot4", "S64_Shot1", "S64_Shot3" ], "group_id": "bg_correctional_facility", "depends_on_fp": [] }, "fp_l53_visitation_room": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a compact mid-2010s correctional visitation room in the specified regional context. Use a simple rectangular institutional room divided horizontally into a south Visitor Zone and a north Secure Zone by a continuous transparent plastic partition mounted on a narrow built-in counter. Place one simple top-down chair glyph on each side, directly facing across the partition. Add a controlled inward-swinging visitor door on the south wall near the southwest corner and a separate controlled inward-swinging secure door on the north wall near the northeast corner. Show thick but single-weight black wall outlines, simple geometric furniture symbols, door swing arcs, and clear circulation space. Fill the Visitor Zone with flat pale yellow, the Secure Zone with flat pale blue, and the narrow partition threshold strip with flat pale beige; use one consistent solid pastel fill per area with no blending. The only area text allowed is Visitor Zone, Secure Zone, and Threshold Zone. Add small white circles with unique black numbers exactly once: 1 in the visitor zone, 2 in the secure zone, 3 on the transparent partition, 4 on the visitor chair, 5 on the inmate chair, 6 on the built-in counter, 7 at the visitor door, and 8 at the secure door. Include no people, loose objects, event cues, plot-state marks, camera symbols, field-of-view graphics, dimensions, legends, or other annotations. Clean CAD-like plan on a white or off-white background, geometric shapes only. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered appearance, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Compact institutional visitation room divided into visitor and secure zones", "Continuous transparent plastic partition between opposing seats", "Built-in counter directly beneath the partition", "Separate controlled access doors for the visitor and secure sides", "Simple mid-2010s correctional-facility layout appropriate to the specified region", "Flat pastel zone coding with minimal internal text" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "visitor zone", "number": 1, "position_hint": "south half of the visitation room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "secure zone", "number": 2, "position_hint": "north half of the visitation room" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "transparent plastic partition", "number": 3, "position_hint": "centerline of the room, separating visitor and secure zones" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "visitor chair", "number": 4, "position_hint": "south side of the partition, centered on the counter" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "inmate chair", "number": 5, "position_hint": "north side of the partition, directly opposite the visitor chair" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "partition counter", "number": 6, "position_hint": "along the room centerline beneath the transparent partition" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "visitor access door", "number": 7, "position_hint": "south wall near the southwest corner" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "secure access door", "number": 8, "position_hint": "north wall near the northeast corner" } ], "camera_recommendations": [ { "bg_id": "L53B01", "camera_height": "seated eye level, approximately 1.2m", "camera_position": "near number 4 on the visitor side, facing number 3 and number 5 across number 6", "framing_notes": "Frame the transparent partition and both facing seats prominently; preserve a clear view through the divider while keeping the controlled doors outside the main composition.", "ignore_numbered_elements": [], "lens_hint": "50mm normal lens", "sub_location": "partitioned_visitation_room", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6 ] } ], "scale_guideline": "This is a single-level interior compartment within a larger correctional building; the building storey count is not specified. A compact footprint of roughly 10–18 square metres and a ceiling height around 2.4–3 metres are typical for this kind of controlled visitation room in the specified era and region. The transparent divider extends from the built-in counter to near ceiling height, preventing physical passage while preserving direct sightlines.", "applied_shots": [ "S63_Shot5", "S63_Shot9" ], "group_id": "bg_correctional_facility", "depends_on_fp": [] }, "fp_l41_apartment_corridor": { "status": "ok", "t2i_prompt": "Create a square 1024x1024 flat top-down schematic architectural floor plan diagram of a long exterior-access apartment corridor. The geometry should reflect a practical early-to-mid-2010s residential apartment block in southwestern South Korea: a long straight shared gallery corridor, apartment entrances repeated along the inner wall, a continuous open exterior edge with a safety railing on the opposite side, and an elevator lobby at one short end. Show only a shallow private residential band behind the entrance wall; do not draw apartment interior rooms. Use clean single-weight black CAD-style outlines on a white or off-white background and simple geometric plan symbols only. Fill each zone with one consistent flat pastel solid color: Shared Zone corridor in pale yellow, Service Zone elevator lobby and shaft in pale cyan, Threshold Zone at the target entrance in pale beige, Private Zone residential band in pale blue, and Exterior Zone beyond the railing in pale gray. No gradients, blending, or shadows. Place small circular markers with black numerals exactly once: 1 in the long shared corridor, 2 in the elevator lobby, 3 at the double sliding elevator doors, 4 along the open exterior railing edge, 5 at the first neighboring inward-swinging entrance door, 6 at the middle neighboring inward-swinging entrance door, 7 at the nearest neighboring inward-swinging entrance door, 8 in the slightly recessed target threshold, 9 at the target inward-swinging entrance door, 10 beside that door at the fixed doorbell button, 11 on that door at the fixed digital lock, 12 in the private residential band, 13 in the elevator shaft, and 14 in the exterior open strip. Draw doors with straight leaves and swing arcs, elevator doors as paired sliding lines, the railing as a simple continuous double-line boundary, and the doorbell and lock as tiny rectangular fixture glyphs. Generic zone labels such as Shared Zone, Service Zone, Threshold Zone, Private Zone, and Exterior Zone may appear as larger text inside their colored areas. Do not include apartment numbers, names, notes, dimensions, legends, characters, hand gestures, camera icons, field-of-view cones, or event-state cues. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered lighting, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Long straight exterior-access shared corridor", "Elevator lobby and elevator at one end", "Repeated inward-swinging apartment entrance doors along one wall", "Open exterior edge with continuous safety railing opposite the apartments", "Distinct target-door threshold with fixed doorbell button and period-appropriate digital lock", "Private residential band indicated without interior room detail" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared access corridor", "number": 1, "position_hint": "long central strip extending from the elevator lobby to the target entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "elevator lobby", "number": 2, "position_hint": "at one short end of the shared corridor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "elevator doors", "number": 3, "position_hint": "centered on the end wall of the elevator lobby" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "open exterior railing edge", "number": 4, "position_hint": "continuous outer side of the corridor opposite the apartment entrances" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "first neighboring entrance", "number": 5, "position_hint": "unit-side wall near the elevator end" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "middle neighboring entrance", "number": 6, "position_hint": "unit-side wall near the middle of the long corridor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "nearest neighboring entrance", "number": 7, "position_hint": "unit-side wall shortly before the target threshold" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "target entrance threshold", "number": 8, "position_hint": "small recessed threshold zone at the far portion of the unit-side wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "target entrance door", "number": 9, "position_hint": "inward-swinging door directly beside the target threshold" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "doorbell button", "number": 10, "position_hint": "wall-mounted beside the latch side of the target entrance door" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "digital door lock", "number": 11, "position_hint": "fixed to the latch side of the target entrance door" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private residential band", "number": 12, "position_hint": "continuous band behind the apartment-side corridor wall, with no interior subdivisions shown" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "elevator shaft", "number": 13, "position_hint": "rectangular service core immediately behind the elevator doors" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "exterior open strip", "number": 14, "position_hint": "narrow schematic exterior zone beyond the corridor safety railing" } ], "camera_recommendations": [ { "bg_id": "L41B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 8 (target threshold), looking toward number 9 (target entrance door), number 10 (doorbell button), and number 11 (digital door lock), with the long corridor receding past numbers 7 and 6", "framing_notes": "Frame the target entrance and doorbell prominently; retain part of number 1 (shared corridor) and number 4 (open exterior railing edge) to establish the exterior-access apartment layout. The elevator end may remain outside the frame.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "apartment_corridor", "use_numbered_elements": [ 1, 4, 6, 7, 8, 9, 10, 11, 12, 14 ] } ], "scale_guideline": "Treat this as one gallery-corridor level of a multi-storey residential slab; the text does not specify its height, so five to fifteen storeys and roughly 15–45 m overall are typical conservative ranges for this regional building type. Use a typical residential floor-to-floor height of about 2.6–3.0 m and a corridor clear width of roughly 1.2–1.8 m; exact dimensions are not specified. The elevator shaft continues through the building's occupied levels, while the open corridor edge has a full-length safety railing or parapet of typical waist-to-chest height. The level has one directly evidenced elevator opening, one target apartment entrance, and several repeated neighboring entrances along the same wall.", "applied_shots": [ "S42_Shot4", "S42_Shot5" ], "group_id": "bg_apartment_unit", "depends_on_fp": [] }, "fp_l42_living_dining_area": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a compact living and dining area in a mid-2010s corridor-access apartment. Use clean single-weight black outlines on a white or off-white background, geometric plan symbols only, and a restrained CAD-like layout. Absolutely no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, or material rendering. Show a compact shared living and dining zone filled with solid pale yellow, a small entrance threshold zone filled with solid pale beige, and a short private-access passage filled with solid pale blue; use one consistent flat pastel color per zone with no blending. The corridor-facing apartment entry should open into the threshold zone, while the shared zone extends toward an exterior facade with one broad window symbol made from double parallel wall lines. Place a short private-access passage at the rear with a standard inward-swinging bedroom door. Arrange a simple rectangular dining and interview table near the center of the shared zone, slightly toward the exterior window, with four top-down chair glyphs around it. Use compact room proportions and practical circulation typical of a modest corridor-access apartment from the specified era and region, without decorative architectural styling. Draw small circular black-number markers exactly once for base elements 1 through 8 only: 1 in the living and dining zone, 2 in the entrance threshold zone, 3 in the private-access passage, 4 at the apartment entry door, 5 at the bedroom door, 6 at the exterior window, 7 on the rectangular table, and 8 beside the grouped dining chairs. Do not draw markers 9 through 13 and do not depict protest materials, coffee, steam, laptop, keepsake box, papers, or photographs because those are transient overlay content. Optional large generic area labels may read Shared Zone, Threshold Zone, and Private Zone. No other text, annotations, camera symbols, view cones, arrows, people, or transient event cues.", "key_elements": [ "Compact shared living and dining zone in a corridor-access apartment", "Small threshold zone connected to the exterior apartment corridor", "Short private-access passage and bedroom doorway", "Exterior living-room window on the facade opposite the corridor entry", "Rectangular interview and dining table with four simple chairs", "Protest placards and folded banners treated as transient overlay objects", "Coffee cups with visible steam and an open laptop treated as interview-state overlays", "Keepsake box, papers, notebooks, letters, photographs, and a selected instant photograph treated as examination-state overlays" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "living and dining zone", "number": 1, "position_hint": "center and exterior-facing side of the plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 2, "position_hint": "corridor-facing edge beside the apartment entry" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private access passage", "number": 3, "position_hint": "rear side of the shared zone leading toward the bedroom" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "apartment entry door", "number": 4, "position_hint": "corridor-facing wall of the entrance threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "bedroom door", "number": 5, "position_hint": "rear wall at the end of the private access passage" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "living room window", "number": 6, "position_hint": "exterior wall opposite the apartment entry" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "rectangular dining table", "number": 7, "position_hint": "center of the living and dining zone, slightly closer to the window" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "four dining chairs", "number": 8, "position_hint": "arranged around the rectangular dining table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "protest placards and banners", "number": 9, "position_hint": "leaning against a peripheral wall of the living and dining zone" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "steaming coffee cups", "number": 10, "position_hint": "on the dining table during the interview" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "open laptop", "number": 11, "position_hint": "on one side of the dining table during the interview" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "keepsake box and paper contents", "number": 12, "position_hint": "opened on the dining table during the later examination" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "selected instant photograph", "number": 13, "position_hint": "held above or placed beside the open keepsake box during examination" } ], "camera_recommendations": [ { "bg_id": "L42B02", "camera_height": "eye-level seated-to-standing transition, approximately 1.5m", "camera_position": "near number 4 (apartment entry door), facing diagonally across number 1 (living and dining zone) toward number 7 (interview table), number 8 (dining chairs), and number 6 (exterior window)", "framing_notes": "Keep the interview group around number 7 central; include number 9 along a peripheral wall, number 10 on the tabletop, and number 11 open at one seat. Preserve a view toward number 5 without making the private room dominant.", "ignore_numbered_elements": [ 12, 13 ], "lens_hint": "35mm moderate wide angle", "sub_location": "living_dining_area", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ] }, { "bg_id": "L42B01", "camera_height": "seated eye level, approximately 1.2m", "camera_position": "beside number 8 (dining chairs), looking across number 7 (interview table) with number 5 (bedroom door) and part of number 1 (living and dining zone) in the background", "framing_notes": "Use a tighter tabletop composition emphasizing number 12 and number 13 while retaining enough of number 7 and number 8 to establish the same apartment location. Number 9 may remain visible at the edge of the background.", "ignore_numbered_elements": [ 10, 11 ], "lens_hint": "50mm normal lens", "sub_location": "living_dining_area", "use_numbered_elements": [ 1, 3, 5, 6, 7, 8, 9, 12, 13 ] } ], "scale_guideline": "This is one apartment within a multi-storey corridor-access residential block; the exact storey count is not specified, while roughly five to fifteen storeys is typical for this regional building type and period. Treat the apartment as a compact to medium household unit, typically about 50–85 square metres overall, with the depicted living and dining portion occupying only part of that footprint. Use a typical residential floor-to-floor height of roughly 2.7–3.0 metres; the depicted shared room has one exterior window bank, one corridor entry door, and one internal bedroom-access door, with no major vertical element inside this plan scope.", "applied_shots": [ "S43_Shot1", "S43_Shot8" ], "group_id": "bg_apartment_unit", "depends_on_fp": [] }, "fp_l43_classroom": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a single kindergarten classroom, using a clean CAD-like plan style. Show one simple rectangular classroom with a corridor-side north wall and a long sun-facing exterior window wall to the south, reflecting an early-to-mid 2010s classroom layout typical of the specified region. Use single-weight black outlines on a white or off-white background and geometric plan symbols only. Divide the room into consistent solid pastel zones: the central shared child seating and activity zone in pale blue, the east-side story-reading zone in pale yellow, the northwest entrance threshold and circulation strip in pale beige, and the north-wall storage zone in pale cyan. Generic area labels such as Shared Zone, Story Zone, Threshold Zone, and Storage Zone may appear in larger plain text; include no other words. Place a long bank of three equal window segments in the south wall using double parallel-line window symbols. Place one inward-swinging corridor entrance door near the northwest corner using a line and door-swing arc. In the east story zone, show a low front-facing bookcase as a narrow rectangle and a simple teacher reading chair facing west. In the central activity zone, show small child chairs or flat floor cushions arranged in a broad semicircle facing the reading chair, leaving a clear circulation path from the entrance. Add low built-in storage cubbies along the north wall. Draw exactly one small white circle with a black number for each base element: 1 main classroom, 2 story area, 3 child seating area, 4 entrance threshold, 5 exterior window bank, 6 entrance door, 7 low bookcase, 8 teacher reading chair, 9 semicircular child seating, 10 built-in storage cubbies. Each number must be unique and appear exactly once. Keep all furniture as simple top-down symbolic glyphs. A small north arrow with N may appear in one corner. Do not add people, books in use, sunlight rays, event cues, camera icons, view cones, dimensions, decorative illustrations, or transient objects. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, blending, or drop shadows.", "key_elements": [ "Single rectangular kindergarten classroom", "Dedicated story-reading area", "Central child seating and activity area", "Semicircular arrangement of child seats or floor cushions", "Teacher reading chair facing the children", "Low front-facing bookcase", "Long exterior window bank", "Single corridor-side entrance door", "Entrance threshold and circulation strip", "Built-in low storage cubbies" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "main classroom", "number": 1, "position_hint": "entire rectangular room within the exterior and corridor walls" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "story area", "number": 2, "position_hint": "east end of the classroom beside the exterior windows" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "child seating area", "number": 3, "position_hint": "center and south-central portion of the classroom facing the story area" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold", "number": 4, "position_hint": "northwest corner immediately inside the corridor entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window bank", "number": 5, "position_hint": "south wall, extending across most of the classroom" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "entrance door", "number": 6, "position_hint": "north wall near the northwest corner, opening inward from the corridor" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "low bookcase", "number": 7, "position_hint": "east wall within the story area" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "teacher reading chair", "number": 8, "position_hint": "east side of the story area, facing west toward the children" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "semicircular child seating", "number": 9, "position_hint": "central child seating area, arranged in a broad arc facing the reading chair" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "built-in storage cubbies", "number": 10, "position_hint": "north wall between the entrance threshold and the story area" } ], "camera_recommendations": [ { "bg_id": "L43B01", "camera_height": "eye-level seated-adult height, approximately 1.3m", "camera_position": "near number 6 (entrance door), facing diagonally across number 3 (child seating area) toward number 2 (story area), number 8 (teacher reading chair), and number 5 (window bank)", "framing_notes": "Show the semicircular child seating layout in the foreground and middle ground, with the reading chair and low bookcase clearly visible against the sunlit window side.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "kindergarten_classroom", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ] } ], "scale_guideline": "The plan covers one classroom within a kindergarten building; the building storey count is not specified, while one to three storeys and floor-to-floor heights of roughly 2.8–3.3 m are typical for this regional building type and era. A classroom footprint of approximately 45–70 square metres is typical, with child-scale furniture and low storage. Two to four exterior window bays and one corridor entrance are typical; the schematic consolidates the windows into one numbered bank. No internal stair, major level change, or other multi-storey vertical element is indicated within this classroom scope.", "applied_shots": [ "S44_Shot1" ], "group_id": "bg_kindergarten", "depends_on_fp": [] }, "fp_l45_main_living_dining": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic 2D architectural floor plan diagram of a compact mid-2010s southern Korean family apartment living and dining area. Use a practical regional apartment layout: a central open shared living-dining zone, a compact wall-aligned kitchen nook beside the dining table, a broad glazed sliding opening to a shallow exterior balcony, and a short unobstructed circulation route to the apartment entry threshold on the opposite side. Fill each zone with one consistent flat pastel solid color: Shared Zone pale yellow, Service Zone pale cyan, Balcony Utility Zone pale gray, and Threshold Zone pale beige. Draw single-weight black outlines on a white or off-white background using geometric CAD-style plan symbols only. Show number 1 in the shared living and dining area, number 2 in the kitchen nook, number 3 on the balcony, number 4 in the entry threshold, number 5 at the glazed balcony sliding opening, number 6 at the entry door with a standard door-swing arc, number 7 on a simple rectangular dining table, number 8 on the surrounding top-down chair group, number 9 on the built-in counter and standard sink symbol, number 10 on the inset gas stovetop symbol, and number 11 on the balcony parapet or railing. Each visible number must appear exactly once as a small white circle with a black integer. Do not draw numbers 12, 13, 14, or 15 because they are transient overlay elements. Generic area labels Shared Zone, Service Zone, Balcony Utility Zone, and Threshold Zone may appear as the only larger text. Include no other labels, captions, dimensions, legends, camera symbols, field-of-view cones, movement arrows, people, food, dishes, smartphone, laundry, notebook, or event-state cues. Strictly no 3D, isometric, perspective, axonometric, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendering, lighting effects, textured surfaces, material rendering, blending, or drop shadows.", "key_elements": [ "Compact open-plan living and dining area", "Dining table positioned beside the kitchen nook", "Built-in kitchen counter, sink, and gas stovetop", "Broad glazed sliding opening toward the balcony", "Balcony with an exterior parapet or railing", "Direct circulation route from the dining area to the apartment entrance", "Temporary smartphone pickup point near the kitchen-facing side of the table", "Temporary breakfast dishes and neatly arranged balcony laundry" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "living and dining area", "number": 1, "position_hint": "central shared zone between the entrance, kitchen, and balcony" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "kitchen nook", "number": 2, "position_hint": "along one side of the dining area, adjacent to the table" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "balcony", "number": 3, "position_hint": "exterior side of the living area beyond the glazed opening" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entry threshold", "number": 4, "position_hint": "opposite the balcony, connected to the shared zone by a clear exit route" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "balcony sliding opening", "number": 5, "position_hint": "exterior wall between the living area and balcony" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "apartment entry door", "number": 6, "position_hint": "outer edge of the entry threshold, opening toward the exit route" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "dining table", "number": 7, "position_hint": "between the kitchen nook and living side, aligned for a balcony sightline" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "dining chairs", "number": 8, "position_hint": "arranged around the dining table without blocking the exit route" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "built-in counter and sink", "number": 9, "position_hint": "against the kitchen nook wall nearest the dining table" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "gas stovetop", "number": 10, "position_hint": "set into the kitchen counter beside the sink work area" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "balcony parapet or railing", "number": 11, "position_hint": "along the outer edge of the balcony" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "smartphone at pickup point", "number": 12, "position_hint": "near the kitchen-facing edge of the dining table or adjacent counter end" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "balcony laundry", "number": 13, "position_hint": "neatly arranged across the balcony drying area" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "breakfast dishes", "number": 14, "position_hint": "on the dining table around the seated place" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "reporting notebook", "number": 15, "position_hint": "temporarily carried or picked up along the route from the living area to the entry" } ], "camera_recommendations": [ { "bg_id": "L45B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 4 (entry threshold), facing diagonally across number 1 (living and dining area) toward number 7 (dining table), number 2 (kitchen nook), and number 5 (balcony opening)", "framing_notes": "Keep the dining table and kitchen fixtures prominent, preserve a clear sightline to the sunlit balcony and laundry, and retain the entry door at the frame edge for the hurried departure. The phone pickup point should remain reachable between the kitchen and dining table.", "ignore_numbered_elements": [], "lens_hint": "28–35 mm moderate wide angle", "sub_location": "living_dining_area", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 ] } ], "scale_guideline": "This plan represents one residential level within a multi-storey apartment building; the total storey count is not specified, while a floor-to-floor height of roughly 2.7–3.0 m is typical for this era and building type. The mapped living-dining, kitchen, threshold, and balcony portion should read as a compact family apartment zone, typically about 25–40 square metres, with the exact footprint unspecified. At this plan scope, use one apartment entry door and one broad glazed balcony access opening; no stairs or other multi-level elements occur inside the mapped area.", "applied_shots": [ "S47_Shot5", "S47_Shot8", "S47_Shot11" ], "group_id": "bg_sunlit_home", "depends_on_fp": [] }, "fp_cafe_interior": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of an entire mid-2010s suburban cafe interior. Use a compact rectangular commercial footprint and a practical regional cafe layout: a glazed customer entrance on the south facade, open customer seating with direct visibility from the entrance, a clear central circulation aisle, a quieter interview table along the east side, a service counter on the west side, a rear preparation area, and a compact rear restroom. Draw single-weight black outlines on a white or off-white background using geometric CAD-like plan symbols only. Use one consistent solid pastel fill per zone: pale beige for the entrance threshold, pale yellow for the shared seating zone, pale green for the circulation aisle, pale cyan for the service zone, pale gray for the utility preparation area, and pale blue for the private restroom. The fills must be flat and solid with no blending. Show the glass entrance door with a standard door leaf and swing arc, storefront glazing as double parallel lines in the south wall, the restroom door with a swing arc, tables as simple rectangles or squares, chairs as small top-down seat glyphs, the service counter as a long rectangle, the sink as a standard plan symbol, the coffee preparation appliance as a simple fixed rectangular appliance glyph, built-in shelving as narrow parallel rectangles, and restroom fixtures as standard top-down plan symbols. Place one small circular marker with a black number exactly once for every base element: 1 entrance threshold zone, 2 shared seating zone, 3 service zone, 4 main circulation aisle, 5 private restroom, 6 utility preparation area, 7 glass entrance door, 8 storefront glazing, 9 restroom door, 10 interview table, 11 general seating cluster, 12 service counter, 13 preparation sink, 14 coffee preparation appliance, 15 built-in service shelving, and 16 restroom fixtures. Do not draw markers 17 or 18 and do not draw the transient coffee cups or notebook; they belong to a separate state overlay. Minimal text only: optional generic area labels such as Threshold Zone, Shared Zone, Service Zone, Utility Zone, and Private Zone, plus an optional small north arrow. No other labels, legends, dimensions, annotations, camera icons, view cones, people, or event cues. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic treatment, rendering, lighting effects, textured surfaces, or material rendering.", "key_elements": [ "Glazed customer entrance with a compact threshold zone", "Open shared seating area with clear sightlines from the entrance", "Central circulation aisle connecting entrance, seating, service counter, and restroom", "Persistent interview table positioned within the quieter side of the seating area", "Service counter with fixed preparation fixtures and built-in shelving", "Compact private restroom and rear utility preparation area", "Flat pastel zoning with numbered base-layer markers only", "Interview coffee cups and notebook reserved for the separate state overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Entrance threshold zone", "number": 1, "position_hint": "south facade, directly inside the customer entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Shared seating zone", "number": 2, "position_hint": "central and east portion of the cafe" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Service zone", "number": 3, "position_hint": "northwest side behind the service counter" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Main circulation aisle", "number": 4, "position_hint": "running from the south entrance through the center toward the rear rooms" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Private restroom", "number": 5, "position_hint": "north rear corner beside the utility area" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "Utility preparation area", "number": 6, "position_hint": "north rear, connected to the service zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Glass entrance door", "number": 7, "position_hint": "south facade at the entrance threshold" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Storefront glazing", "number": 8, "position_hint": "south facade beside the glass entrance door" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "Restroom door", "number": 9, "position_hint": "north end of the circulation aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Interview table", "number": 10, "position_hint": "east side of the shared seating zone, away from the service queue" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "General seating cluster", "number": 11, "position_hint": "central and southeast portions of the shared seating zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "Service counter", "number": 12, "position_hint": "west side, separating customers from the service zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Preparation sink", "number": 13, "position_hint": "rear wall of the utility preparation area" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Coffee preparation appliance", "number": 14, "position_hint": "service side of the main counter" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "Built-in service shelving", "number": 15, "position_hint": "north wall behind the service counter" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "Restroom fixtures", "number": 16, "position_hint": "inside the private restroom along the north and west walls" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Interview coffee cups", "number": 17, "position_hint": "on the interview table during the seated conversation" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "Open investigation notebook", "number": 18, "position_hint": "on the interview table in front of an interviewer" } ], "camera_recommendations": [ { "bg_id": "L46B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "just outside and near number 7 (glass entrance door), facing through number 8 (storefront glazing) toward number 2 (shared seating area), with number 4 (circulation aisle) leading toward number 10 (interview table)", "framing_notes": "Emphasize the transparent entrance and clear sightline into the cafe; keep the interview table deeper in the frame and do not depict the interview-specific loose objects.", "ignore_numbered_elements": [ 17, 18 ], "lens_hint": "35mm moderate wide angle", "sub_location": "cafe_entrance", "use_numbered_elements": [ 1, 2, 4, 7, 8, 10, 11 ] }, { "bg_id": "L46B02", "camera_height": "seated eye level, approximately 1.2 m", "camera_position": "near number 10 (interview table), facing diagonally across number 2 (shared seating area) toward number 12 (service counter), with number 7 (glass entrance door) visible beyond the circulation aisle", "framing_notes": "Keep the interview table dominant, include nearby seating and the entrance in the wider context, and depict the coffee cups and open notebook as moment-specific loose objects.", "ignore_numbered_elements": [], "lens_hint": "40mm natural interior lens", "sub_location": "cafe_seating_area", "use_numbered_elements": [ 2, 3, 4, 7, 8, 10, 11, 12, 14, 15, 17, 18 ] } ], "scale_guideline": "Treat the cafe as a single-storey commercial unit, typical for this suburban building type; the text does not specify the building's storey count. A typical footprint for this layout is roughly 80–150 square meters, with a typical clear interior height of about 2.7–3.3 meters. One glazed customer entrance is explicit, while several adjacent storefront glazing bays are typical rather than textually specified. No stairs or other multi-storey vertical elements are required within this floor plan scope.", "applied_shots": [ "S48_Shot4", "S48_Shot11", "S48_Shot14" ], "group_id": "bg_suburban_cafe", "depends_on_fp": [] }, "fp_l50_main_room": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of one compact, clutter-prone, single-space interior appropriate to an early-to-mid-2010s urban residential setting in the specified region. Use a clean CAD-plan appearance with single-weight black outlines on a white or off-white background, geometric shapes only, and no internal partition walls. Divide the room functionally with solid flat pastel fills: Private Zone in pale blue along the west and northwest sleeping side, Shared Zone in pale yellow across the center and east work area, Service Zone in pale cyan along the north storage wall, and Threshold Zone in pale beige immediately inside the south entrance. Use each color consistently with sharp boundaries and no blending. Draw one inward-swinging entrance door in the south wall using a line and swing arc, and one exterior window in the north wall using double parallel lines. Show simple top-down symbolic glyphs: a single bed with a pillow against the west wall, a wardrobe near its head, a storage cabinet along the north wall, a rectangular work table in the east-central area, a wall-mounted whiteboard on the east wall, and stacked storage boxes in the southwest corner. Place one small circular marker with a black number exactly once for each base element numbered 1 through 13. Do not draw markers 14 through 18 and do not depict disturbed furnishings, evidence containers, an opened album, seized-item piles, writing, photographs, records, people, or any other transient event cue. Minimal text only: the generic area labels Private Zone, Shared Zone, Service Zone, and Threshold Zone may appear inside their colored areas; no other labels, captions, legends, dimensions, annotations, camera icons, view cones, or arrows. A small north arrow with the letter N is allowed in one corner. Absolutely no 3D, isometric, perspective, axonometric projection, depth, shadows, shading, gradients, ambient occlusion, photorealism, rendered lighting, textured surfaces, material rendering, decorative illustration, or furniture perspective.", "key_elements": [ "Compact single-space interior with no internal partition walls", "Private sleeping zone along one side of the room", "Shared work and evidence-review zone facing a fixed whiteboard", "Service and storage zone with wardrobe and cabinet", "Small threshold zone at the inward-swinging entrance", "One exterior window opposite or beside the entrance for a typical compact urban room layout", "Simple symbolic bed, wardrobe, cabinet, work table, whiteboard, and storage-box glyphs", "Flat pastel zone fills with numbered base markers only", "Transient search disturbance, evidence containers, album, seized-item piles, and written records excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "single-room interior", "number": 1, "position_hint": "center of the complete rectangular interior footprint" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "private sleeping zone", "number": 2, "position_hint": "northwest side surrounding the bed" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared work zone", "number": 3, "position_hint": "central and eastern portion of the room" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "service storage zone", "number": 4, "position_hint": "along the north and northeast walls" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "threshold zone", "number": 5, "position_hint": "small area immediately inside the south entrance" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "entrance door", "number": 6, "position_hint": "south wall near the southeast corner, swinging inward" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "exterior window", "number": 7, "position_hint": "north wall above the work and storage side" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "single bed", "number": 8, "position_hint": "against the west wall in the private sleeping zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "wardrobe", "number": 9, "position_hint": "northwest corner beside the head of the bed" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "storage cabinet", "number": 10, "position_hint": "north wall between the wardrobe and work area" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "work table", "number": 11, "position_hint": "east-central side facing the whiteboard" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "wall-mounted whiteboard", "number": 12, "position_hint": "east wall opposite the work table" }, { "base_layer_decision": "base_persistent_furniture", "category": "prop", "label": "stacked storage boxes", "number": 13, "position_hint": "southwest corner near the foot of the bed" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "disturbed furnishings from active search", "number": 14, "position_hint": "across the sleeping and storage zones around the bed, wardrobe, and cabinet" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "evidence containers with papers and photographs", "number": 15, "position_hint": "temporary placement in the central shared zone during the search" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "opened photo album", "number": 16, "position_hint": "temporarily opened on or immediately above the work table" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "piles of seized items", "number": 17, "position_hint": "temporarily stacked around the work table during nighttime review" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "dense investigation records on whiteboard", "number": 18, "position_hint": "temporary writing, diagrams, and pinned records covering the whiteboard surface" } ], "camera_recommendations": [ { "bg_id": "L50B01", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 6 (entrance door), facing diagonally across number 1 (single-room interior) toward number 8 (bed), number 9 (wardrobe), and number 10 (storage cabinet)", "framing_notes": "Show the cramped relationship between the bed, wardrobe, cabinet, and search route. Depict number 14 and number 15 as transient search-state overlays without altering the base plan.", "ignore_numbered_elements": [ 16, 17, 18 ], "lens_hint": "28mm moderate wide angle", "sub_location": "cluttered_bedroom_search_area", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 13, 14, 15 ] }, { "bg_id": "L50B02", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "within number 3 (shared work zone), facing number 10 (storage cabinet) and number 11 (work table), with number 7 (exterior window) providing spatial orientation", "framing_notes": "Center number 16 on or immediately above the work table while retaining the storage cabinet in the background. Keep the other search and office evidence states absent.", "ignore_numbered_elements": [ 14, 15, 17, 18 ], "lens_hint": "40mm normal lens", "sub_location": "album_inspection_corner", "use_numbered_elements": [ 1, 3, 4, 7, 10, 11, 16 ] }, { "bg_id": "L50B03", "camera_height": "eye-level standing, approximately 1.6 m", "camera_position": "near number 11 (work table), facing number 12 (wall-mounted whiteboard) across number 3 (shared work zone)", "framing_notes": "Make the whiteboard the dominant background plane, include seized-item piles at the edge of the work zone, and depict numbers 17 and 18 only as nighttime investigative overlays.", "ignore_numbered_elements": [ 14, 15, 16 ], "lens_hint": "35mm wide-normal lens", "sub_location": "night_evidence_review_area", "use_numbered_elements": [ 1, 3, 5, 6, 11, 12, 17, 18 ] } ], "scale_guideline": "The documented scope is one compact interior room rather than an entire building, so the building storey count is unspecified. Treat the room as a typical small urban bedroom or multipurpose room of roughly 12–20 square metres, with a typical ceiling height around 2.3–2.6 metres; these ranges are regional building-type conventions rather than stated measurements. The plan uses one entrance door and one exterior window, with no stairs, mezzanines, or other vertical circulation shown.", "applied_shots": [ "S58_Shot1", "S58_Shot6", "S58_Shot10" ], "group_id": "bg_cluttered_bedroom", "depends_on_fp": [] }, "fp_cocktail_bar_main": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic floor plan diagram of a compact narrow rectangular cocktail bar interior. Use the layout conventions of a modest early-to-mid-2010s urban bar in the specified region: a street-facing entrance at the south end, a narrow customer aisle, a long bar counter running north-south, adjacent customer stools, and an efficient bartender work strip with backbar storage along the east wall. This must look like a clean architectural CAD plan or simple room-layout sketch made only from geometric shapes and single-weight black outlines on a white or off-white background. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadow, no shading, no gradient, no ambient occlusion, no photorealism, no rendered appearance, no lighting effects, no textured surfaces, and no material rendering. Apply single flat pastel solid fills with no blending: pale yellow for number 1, the shared customer seating zone; pale cyan for number 2, the bartender work zone; pale beige for number 3, the entrance threshold zone; and pale gray for number 4, the rear service and storage zone. Short generic area labels such as Shared Zone, Service Zone, Threshold Zone, and Utility Zone may appear inside the colored areas. Draw number 5 as a long simple rectangular bar counter dividing numbers 1 and 2. Draw number 6 as a row of simple circular top-down bar-stool glyphs along the customer side, including adjacent positions suitable for two patrons seated side by side. Draw number 7 as shallow built-in backbar shelving against the east wall. Draw number 8 as a standard top-down sink symbol, number 9 as a rectangular built-in cocktail prep station with an ice-well compartment, and number 10 as a simple undercounter refrigerator rectangle. Draw number 11 as a south-wall entrance with a clear door-swing arc and number 12 as a double parallel-line window in the south wall. Draw number 13 as a long rectangular wall banquette on the west side and number 14 as compact simple two-person table rectangles between the banquette and the central aisle. Place one small circle containing a unique black number exactly once on every base element numbered 1 through 14. Do not write object names or annotations inside the drawing. Do not draw numbers 15 or 16, and do not draw their glasses or bottle, because they are transient scene-overlay objects. Furniture must use conventional top-down symbolic glyphs only. No people, no bartender figure, no camera icon, no field-of-view cone, and no event arrows. A small north arrow with the letter N may appear in one corner.", "key_elements": [ "Narrow rectangular urban cocktail bar tenancy", "Pale yellow shared customer seating zone", "Pale cyan bartender work zone", "Pale beige entrance threshold zone", "Pale gray rear service and storage zone", "Long bar counter with adjacent row of stools", "Backbar shelving, sink, cocktail prep station, and undercounter refrigerator", "Street entrance and limited street-facing glazing", "Wall banquette with compact two-person tables", "Transient pair of straight glasses and liquor bottle reserved for the scene overlay" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "customer seating zone", "number": 1, "position_hint": "central and west side of the narrow interior" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "bartender work zone", "number": 2, "position_hint": "long strip along the east side behind the bar counter" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance threshold zone", "number": 3, "position_hint": "south end immediately inside the public entrance" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "rear service and storage zone", "number": 4, "position_hint": "north end behind the bartender work zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "bar counter", "number": 5, "position_hint": "long north-south counter dividing customer and bartender zones" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "bar stool row", "number": 6, "position_hint": "customer side of the bar counter with adjacent seating positions" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "backbar shelving", "number": 7, "position_hint": "east wall behind the bartender work zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "bar sink", "number": 8, "position_hint": "rear portion of the bartender work zone near the service area" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "cocktail prep station and ice well", "number": 9, "position_hint": "center of the bartender work zone opposite the principal stools" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "undercounter refrigerator", "number": 10, "position_hint": "beneath the rear half of the bar counter" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "public entrance door", "number": 11, "position_hint": "south street-facing wall opening into the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "street-facing window", "number": 12, "position_hint": "south wall beside the public entrance" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "wall banquette", "number": 13, "position_hint": "west wall of the customer seating zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "compact customer tables", "number": 14, "position_hint": "between the west wall banquette and the bar-stool aisle" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "pair of straight liquor glasses", "number": 15, "position_hint": "on the bar counter before two adjacent customer stools" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "liquor bottle used for refilling", "number": 16, "position_hint": "temporarily carried from the backbar to the customer side of the counter" } ], "camera_recommendations": [ { "bg_id": "L51B01", "camera_height": "eye-level seated-to-standing transition, approximately 1.4–1.6 m", "camera_position": "from the customer aisle near number 13 (wall banquette), facing diagonally across number 1 (customer seating zone) toward number 5 (bar counter), number 6 (bar stools), and number 7 (backbar shelving)", "framing_notes": "Frame two adjacent positions at number 6 opposite the bartender work zone, with numbers 5 and 7 forming the principal background. Keep number 9 visible as the bartender's cocktail-making station and allow number 16 to be carried between the backbar and the two glasses at number 15.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "cocktail_bar_interior", "use_numbered_elements": [ 1, 2, 4, 5, 6, 7, 8, 9, 10, 13, 14, 15, 16 ] } ], "scale_guideline": "Treat the depicted scope as one customer floor within a larger commercial building; the host building's total storey count is not specified. A compact narrow tenancy of roughly 40–80 square metres and a clear interior height around 2.4–3.0 metres are typical for this type of urban bar in the specified era and region, but exact dimensions are not stated. Opening counts are unspecified; a single public entrance with limited street-facing glazing is a conservative typical arrangement. No stair, mezzanine, or other multi-level vertical element is established for this interior.", "applied_shots": [ "S60_Shot1", "S60_Shot10", "S60_Shot11" ], "group_id": "bg_cocktail_bar", "depends_on_fp": [] }, "fp_courthouse_forecourt": { "status": "ok", "t2i_prompt": "Create a square 1024×1024 flat top-down schematic architectural floor plan diagram of a mid-2010s civic courthouse frontage and pedestrian forecourt. Show a broad rectangular institutional building mass along the north side, a recessed central public entrance in its south-facing wall, a shallow entrance landing, a wide formal stair flight drawn as parallel plan lines, and an adjacent accessible ramp drawn with simple parallel outlines and a landing. Extend a large open pedestrian forecourt southward from the steps, with a straight central approach providing a long unobstructed circulation axis to a street-edge sidewalk. Show repeated front-wall window openings on both sides of the entrance using double parallel line symbols. Use clean single-weight black outlines on a white or off-white background and geometric top-down CAD symbols only. Apply single flat pastel solid fills consistently by area: courthouse building zone pale blue, entrance threshold and landing pale beige, steps and ramp pale beige, shared pedestrian forecourt pale yellow, central circulation approach pale green, and street-edge exterior sidewalk pale gray. Place exactly one small white circular marker with a black number for each persistent element: 1 on the courthouse frontage, 2 on the main sliding entrance, 3 on the entrance landing, 4 on the entrance steps, 5 on the accessible ramp, 6 in the pedestrian forecourt, 7 on the central pedestrian approach, 8 on the street-edge sidewalk, and 9 on the front facade window bank. No people, vehicles, temporary objects, emotional-event cues, camera icons, field-of-view cones, or directional annotations. No text inside the diagram except the numbered circles; a small north arrow with N is allowed. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered lighting, lighting effects, textured surfaces, material rendering, blending, or drop shadows.", "key_elements": [ "Broad civic courthouse frontage set behind an open pedestrian forecourt", "Recessed central public entrance with a clear threshold landing", "Formal entrance steps paired with an accessible side ramp", "Long central pedestrian sightline across the plaza", "Street-edge sidewalk defining the outer forecourt boundary", "Repeated front-wall glazing appropriate to a mid-2010s public building" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "courthouse frontage", "number": 1, "position_hint": "north side of plan, broad rectangular institutional building mass" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "main sliding entrance", "number": 2, "position_hint": "center of the south-facing courthouse wall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "entrance landing", "number": 3, "position_hint": "directly outside the main entrance, centered on the frontage" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "entrance steps", "number": 4, "position_hint": "between the entrance landing and the northern edge of the forecourt" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "accessible ramp", "number": 5, "position_hint": "along one side of the entrance steps, linking forecourt and landing" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "pedestrian forecourt", "number": 6, "position_hint": "broad open area south of the entrance steps" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central pedestrian approach", "number": 7, "position_hint": "centerline through the forecourt from the entrance toward the street edge" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "street-edge sidewalk", "number": 8, "position_hint": "south edge of plan, spanning the width of the plaza frontage" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "front facade window bank", "number": 9, "position_hint": "repeated glazed openings along the south-facing wall on both sides of the entrance" } ], "camera_recommendations": [ { "bg_id": "L58B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 8 (street-edge sidewalk), facing across number 7 (central pedestrian approach) and number 6 (forecourt) toward number 2 (main entrance) and number 1 (courthouse frontage)", "framing_notes": "Use a centered, broad establishing composition that clearly presents the entrance, steps, ramp, forecourt, and repeated front glazing under clear daytime conditions.", "ignore_numbered_elements": [], "lens_hint": "28mm wide angle", "sub_location": "courthouse_forecourt", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] }, { "bg_id": "L58B02", "camera_height": "eye-level standing ~1.6m", "camera_position": "near the side edge of number 6 (forecourt), facing diagonally past number 3 (entrance landing) and number 4 (entrance steps) along number 7 (central pedestrian approach) toward number 8 (street-edge sidewalk)", "framing_notes": "Preserve a long, unobstructed sightline from the entrance to the far side of the plaza, with enough open space to stage one figure near the building and another moving away in the distance.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "courthouse_forecourt", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] } ], "scale_guideline": "The courthouse is a multi-storey civic building, typically about four to eight storeys for this regional building type; the exact storey count is not specified in the text. Treat the frontage as a broad institutional footprint typically several tens of metres across, with the pedestrian forecourt providing substantial separation from the street edge. The main public entrance is a single central entrance assembly, while the facade should have repeated window bays on each upper storey; exact window counts are unspecified. The entrance landing is raised only by a modest level change, bridged by the full stair flight and adjacent accessible ramp shown in the plan.", "applied_shots": [ "S72_Shot1", "S84_Shot1", "S86_Shot4", "S86_Shot6" ], "group_id": "bg_courthouse", "depends_on_fp": [] }, "fp_courtroom": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan of a unified mid-2010s regional courtroom. The diagram must look like a clean CAD plan or simple room-layout sketch using single-weight black outlines on a white or off-white background and geometric plan symbols only. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealism, rendered lighting, textured surfaces, or material rendering. Use solid flat pastel fills with no blending: adjudication zone pale blue, central litigation floor pale yellow, witness and evidence zone pale cyan, secured dock zone pale lavender, public gallery zone pale green, and entrance threshold zone pale beige. Place the raised adjudication zone along the north wall with a long judge bench and judge seating centered behind it, plus a clerk desk in front. Place the witness stand at the northeast front, angled toward the judge bench, and a large fixed projection screen on the northeast wall. Arrange separate prosecution and defense tables on the east and west sides of the central litigation floor, both facing the bench; place a document camera beside the prosecution table. Place an enclosed defendant dock behind the defense position on the northwest side, with a low fixed barrier and a controlled side door near the northwestern wall. Fill the southern half with two orderly blocks of fixed gallery benches divided by a broad central aisle leading to public double doors in the south wall. Add conventional side window banks on the east and west walls. Use simple top-down symbolic glyphs: tables as rectangles, chairs as small rectangles, the dock as a low outlined enclosure, doors as wall gaps with swing arcs, windows as double parallel lines, and the projection screen as a thin wall-mounted rectangle. Draw small circular markers with black numbers 1 through 21 exactly once each at their corresponding persistent areas, openings, fixtures, and anchor furniture. Do not draw markers 22 through 30 because they are transient overlay cues. Minimal text only: generic area labels such as Adjudication Zone, Litigation Floor, Witness Zone, Dock Zone, Public Gallery, and Threshold Zone may appear inside their color fields, plus a small north arrow marked N in one corner. No other labels, captions, evidence imagery, people, camera icons, view cones, arrows, case text, dates, or annotations.", "key_elements": [ "Raised adjudication zone at the north end", "Central litigation floor with separate prosecution and defense tables", "Witness stand positioned near the judge bench and presentation screen", "Secured defendant dock with controlled side access", "Rear public gallery divided by a central aisle", "Large fixed projection screen and document camera for evidence presentation", "Rear public double doors and separate controlled service door", "Flat pastel zoning with numbered base markers only" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "adjudication zone", "number": 1, "position_hint": "north end of courtroom, raised behind the litigation floor" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "litigation floor", "number": 2, "position_hint": "central courtroom between adjudication zone and gallery" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "witness and evidence zone", "number": 3, "position_hint": "northeast front corner beside the adjudication zone" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "secured dock zone", "number": 4, "position_hint": "northwest side of litigation floor near controlled access" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "public gallery zone", "number": 5, "position_hint": "southern half of courtroom behind the counsel floor" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "public threshold zone", "number": 6, "position_hint": "south end around the courtroom entrance and central aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "judge bench", "number": 7, "position_hint": "center of north wall on the raised adjudication zone" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "judge seating", "number": 8, "position_hint": "immediately behind number 7 on the north side" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "clerk desk", "number": 9, "position_hint": "in front of and slightly east of number 7" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "witness stand", "number": 10, "position_hint": "northeast front of litigation floor, angled toward number 7" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "prosecution table", "number": 11, "position_hint": "east side of central litigation floor facing north" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "defense table", "number": 12, "position_hint": "west side of central litigation floor facing north" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "defendant dock", "number": 13, "position_hint": "northwest side behind number 12, enclosed by a low barrier" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "gallery benches", "number": 14, "position_hint": "southern public gallery in two blocks divided by a central aisle" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "projection screen", "number": 15, "position_hint": "northeast wall, visible from bench, witness stand, counsel tables, and gallery" }, { "base_layer_decision": "base_persistent_fixture", "category": "prop", "label": "document camera", "number": 16, "position_hint": "east side of litigation floor adjacent to number 11 and linked to number 15" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "public double doors", "number": 17, "position_hint": "center of south wall opening into the threshold zone" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "east window bank", "number": 18, "position_hint": "east exterior wall beside the gallery and litigation floor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "west window bank", "number": 19, "position_hint": "west exterior wall beside the gallery and litigation floor" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "controlled service door", "number": 20, "position_hint": "northwest wall beside the secured dock and adjudication zone" }, { "base_layer_decision": "base_persistent_fixture", "category": "furniture", "label": "dock barrier", "number": 21, "position_hint": "low fixed enclosure surrounding number 13 on the litigation-floor side" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "autopsy image display", "number": 22, "position_hint": "scene-specific content confined to number 15 projection screen" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "alibi photograph display", "number": 23, "position_hint": "scene-specific photograph confined to number 15 projection screen" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "route map display", "number": 24, "position_hint": "scene-specific satellite route image confined to number 15 projection screen" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "riverside comparison display", "number": 25, "position_hint": "scene-specific comparison photographs confined to number 15 projection screen" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "submitted diary", "number": 26, "position_hint": "temporarily placed at number 7 or number 9 during evidence submission" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "forensic demonstration objects", "number": 27, "position_hint": "temporarily held at number 10 during expert testimony" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "forensic experiment display", "number": 28, "position_hint": "scene-specific experiment photographs confined to number 15 projection screen" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "area", "label": "spectator disturbance cue", "number": 29, "position_hint": "temporary shouting and standing activity around number 14 in the gallery" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "area", "label": "standing gallery arrangement", "number": 30, "position_hint": "temporary orderly standing state across number 14 during judicial entrance" } ], "camera_recommendations": [ { "bg_id": "L59B02", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 17 (public double doors), facing diagonally across number 5 (gallery zone) toward number 7 (judge bench), number 10 (witness stand), and number 15 (projection screen)", "framing_notes": "Use a broad procedural courtroom view that preserves the spatial relationship among the bench, witness stand, counsel tables, dock, gallery, screen, and evidence presentation equipment. Depict the applicable evidence cues from numbers 22 through 28 only as scene-specific overlays, never as permanent architecture.", "ignore_numbered_elements": [ 29, 30 ], "lens_hint": "28mm wide angle", "sub_location": "courtroom", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 ] }, { "bg_id": "L59B03", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 12 (defense table), facing diagonally toward number 10 (witness stand) while keeping number 13 (defendant dock) visible across the examination floor", "framing_notes": "Emphasize the sightline between the witness stand and defendant dock, with the judge bench and counsel positions establishing courtroom authority in the background.", "ignore_numbered_elements": [ 22, 23, 24, 25, 26, 27, 28, 29, 30 ], "lens_hint": "35mm moderate wide angle", "sub_location": "witness_examination_floor", "use_numbered_elements": [ 1, 2, 3, 4, 7, 8, 9, 10, 11, 12, 13, 15, 16, 18, 19, 20 ] }, { "bg_id": "L59B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 11 (prosecution table), facing back across number 2 (litigation floor) toward number 14 (gallery benches) and number 17 (public double doors)", "framing_notes": "Keep part of the counsel floor and dock in the foreground while showing the disturbed spectator area clearly. Number 29 is a transient crowd-state overlay and must not become a permanent plan feature.", "ignore_numbered_elements": [ 22, 23, 24, 25, 26, 27, 28, 30 ], "lens_hint": "32mm wide angle", "sub_location": "gallery_facing_courtroom", "use_numbered_elements": [ 1, 2, 4, 5, 6, 7, 9, 11, 12, 13, 14, 17, 18, 19, 29 ] }, { "bg_id": "L59B04", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 17 (public double doors), centered on the main aisle through number 5 (gallery zone) and facing number 7 (judge bench)", "framing_notes": "Use balanced, solemn axial framing with the judge bench dominant, gallery benches on both sides, and counsel tables and dock clearly ordered between them. Apply number 30 only for the moment when the gallery stands.", "ignore_numbered_elements": [ 22, 23, 24, 25, 26, 27, 28, 29 ], "lens_hint": "35mm wide angle", "sub_location": "central_gallery_aisle", "use_numbered_elements": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19, 20, 21, 30 ] } ], "scale_guideline": "This plan covers one large courtroom on a single occupied level within a multi-storey courthouse; the courthouse storey count is not specified in the text. A footprint around 18–25 m long by 10–16 m wide and a clear courtroom height around 3.5–5 m are typical conservative ranges for this building type, not text-specified measurements. The plan uses one rear public double-door opening, one controlled side door, and two side window banks as a typical modern regional-court arrangement; the source scenes do not state exact facade opening counts. The adjudication platform should read as a modest raised level rather than a separate storey.", "applied_shots": [ "S73_Shot5", "S73_Shot6", "S73_Shot7", "S75_Shot1", "S75_Shot7", "S80_Shot1", "S80_Shot3", "S85_Shot5", "S85_Shot19", "S85_Shot23", "S87_Shot1", "S87_Shot3", "S87_Shot5", "S88_Shot4", "S88_Shot7", "S88_Shot8", "S74_Shot2", "S74_Shot8", "S74_Shot11", "S89_Shot9", "S89_Shot13", "S89_Shot15" ], "group_id": "bg_courthouse", "depends_on_fp": [] }, "fp_l61_conference_hall": { "status": "ok", "t2i_prompt": "Create a square 1024 x 1024 flat top-down schematic architectural floor plan of a rectangular institutional conference hall. Use a clean CAD-like diagram with single-weight black outlines on a white or off-white background, geometric plan symbols only, and ample uncluttered spacing. Strictly no 3D, no isometric, no perspective, no axonometric, no depth, no shadows, no shading, no gradients, no ambient occlusion, no photorealism, no rendered lighting, no textured surfaces, and no material rendering. Fill each zone with one consistent flat pastel solid color: the main shared hall zone in pale yellow, the raised formal stage zone in pale blue, the central and side circulation aisles in pale gray, and the stage-step and entrance threshold zones in pale beige. Place a broad shallow raised stage across most of the north end. On the stage, show a long rectangular stage table parallel to the north wall, one centered presiding chair, and a symmetrical set of simple top-down officer chair glyphs flanking it. Add a short centered stage-step run leading to a straight central aisle. Add narrow left and right side aisles. Place a double-leaf principal entrance with conventional door-swing arcs at the center of the south wall, aligned with the central aisle, and a secondary single door with a swing arc near the south end of the east wall. Reflect a restrained mid-2010s regional government conference-room layout through orderly symmetry, broad circulation, practical institutional proportions, and period-appropriate fixed furniture geometry only. Draw small white circles with black outlines and black numbers exactly once for base-layer elements 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, and 11. Do not draw markers 12 or 13, and do not draw the meeting banner, phone, people, uniforms, event action, camera icons, view cones, or arrows. Use no text labels or annotations inside the drawing other than the numbered circles.", "key_elements": [ "Rectangular institutional conference hall with a broad stage at the north end", "Long central stage table with a presiding chair and symmetrical flanking officer chairs", "Short stage steps aligned with the central aisle", "Central and side circulation aisles leading toward the stage", "Rear double-leaf principal entrance and secondary side entrance", "Stage-wall meeting banner reserved for the transient overlay layer", "Ringing handheld phone reserved for the transient overlay layer" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "conference hall", "number": 1, "position_hint": "large rectangular shared zone occupying the main plan" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "raised stage", "number": 2, "position_hint": "north end of conference hall, spanning most of the front wall" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "rear double entrance", "number": 3, "position_hint": "center of south wall, aligned with central aisle" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "side entrance", "number": 4, "position_hint": "south end of east wall, beside the right aisle" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "stage table", "number": 5, "position_hint": "center of raised stage, long axis parallel to north wall" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "presiding chair", "number": 6, "position_hint": "centered behind stage table" }, { "base_layer_decision": "base_persistent_furniture", "category": "furniture", "label": "flanking officer chairs", "number": 7, "position_hint": "symmetrical row behind and beside the central presiding chair" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "stage steps", "number": 8, "position_hint": "center front edge of raised stage, aligned with central aisle" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "central aisle", "number": 9, "position_hint": "runs north-south from rear double entrance to stage steps" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "left side aisle", "number": 10, "position_hint": "along west side of main hall" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "right side aisle", "number": 11, "position_hint": "along east side of main hall and connected to side entrance" }, { "base_layer_decision": "state_overlay_plot_cue", "category": "prop", "label": "formal meeting banner", "number": 12, "position_hint": "north wall above the center of the raised stage; overlay only" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "ringing handheld phone", "number": 13, "position_hint": "with one seated officer among the flanking stage chairs; overlay only" } ], "camera_recommendations": [ { "bg_id": "L61B01", "camera_height": "eye-level standing ~1.6m", "camera_position": "near number 9 (central aisle) at the rear of number 1 (conference hall), facing number 2 (raised stage), number 5 (stage table), and the officer seating at numbers 6 and 7", "framing_notes": "Use a centered, formal stage-facing composition. Keep number 12 visible above the stage and preserve enough of the seated group around numbers 6 and 7 for the transient phone action at number 13.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "conference_hall", "use_numbered_elements": [ 1, 2, 5, 6, 7, 8, 9, 10, 11, 12, 13 ] } ], "scale_guideline": "The scoped conference hall is a single-level interior within a larger institutional building; the parent building's storey count is not specified. A clear height of roughly 3.5–5 m is typical for a regional government conference hall of this era, and the footprint should read as a medium hall sized around a broad dais and roughly a dozen seated officials. Facade opening counts are not stated; the rear double entry, secondary side entry, and low stage with a short step run are conservative typical layout assumptions.", "applied_shots": [ "S76_Shot1", "S76_Shot5" ], "group_id": "bg_police_headquarters_hall", "depends_on_fp": [] }, "fp_l62_conference_hall_corridor": { "status": "ok", "t2i_prompt": "Create a square 1024 by 1024 flat top-down schematic architectural floor plan diagram of a quiet institutional corridor outside a large conference hall in a South Korean regional government office building of the early-to-mid 2010s. Show a simple elongated corridor with solid perimeter walls, a broad double-leaf conference hall door opening from one long wall with standard door leaves and swing arcs, a clear central walking path, and a modest widened stopping area immediately beside the doorway where a person can pause without blocking circulation. Use period-appropriate public-office layout geometry: practical proportions, broad meeting-room access, straight circulation, and uncluttered wall edges. Use single-weight black outlines on a white or off-white background and geometric plan symbols only. Apply one consistent flat pastel solid fill per distinct area: pale yellow for the shared corridor zone, pale cyan for the central walking path, and pale beige for the doorway threshold and stopping area. Optional large generic area text may read Shared Zone, Circulation Zone, and Threshold Zone only. Place a small circle containing black number 1 exactly once in the shared corridor zone, number 2 exactly once at the double doorway, number 3 exactly once in the clear walking path, and number 4 exactly once in the stopping area. Do not draw number 5 or the handheld phone because it is a transient overlay object. Include no people, phone-call action, event cues, camera icons, view cones, dimensions, legends, or text other than the optional generic zone names and a small north arrow. Strictly no 3D, isometric, perspective, axonometric, depth, shadow, shading, gradient, ambient occlusion, photorealistic imagery, rendered imagery, lighting effects, textured surfaces, or material rendering. Use no gradients, blending, or drop shadows.", "key_elements": [ "Straight institutional corridor outside a large meeting hall", "Wide double-leaf conference hall doorway", "Unobstructed walking path through the corridor", "Small stopping area beside the hall entrance", "Period-appropriate public-office circulation geometry", "Transient handheld phone excluded from the base diagram" ], "numbered_elements": [ { "base_layer_decision": "base_structural_unit", "category": "area", "label": "shared corridor zone", "number": 1, "position_hint": "main elongated circulation area spanning the plan" }, { "base_layer_decision": "base_opening", "category": "opening", "label": "conference hall double doorway", "number": 2, "position_hint": "long wall of the corridor beside the stopping area" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "clear walking path", "number": 3, "position_hint": "central linear strip running along the corridor" }, { "base_layer_decision": "base_structural_unit", "category": "area", "label": "stopping area", "number": 4, "position_hint": "widened corridor space immediately beside the conference hall doorway" }, { "base_layer_decision": "state_overlay_transient_object", "category": "prop", "label": "handheld phone", "number": 5, "position_hint": "carried by the caller in the stopping area; overlay only and not drawn on the floor plan" } ], "camera_recommendations": [ { "bg_id": "L62B01", "camera_height": "eye-level standing, approximately 1.6m", "camera_position": "within number 3 (walking path), facing diagonally toward number 2 (conference hall doorway) and number 4 (stopping area)", "framing_notes": "Keep the hall doorway and adjacent stopping area prominent; allow a clear view of the quiet institutional corridor and depict number 5 only as the handheld phone used during the call.", "ignore_numbered_elements": [], "lens_hint": "35mm moderate wide angle", "sub_location": "conference_hall_corridor", "use_numbered_elements": [ 1, 2, 3, 4, 5 ] } ], "scale_guideline": "The corridor belongs to a multi-storey institutional government building, typical for the region and period; the exact storey count is not specified, and a typical floor-to-floor height is approximately 3.3–4.2 meters. Use a typical public-building corridor width of roughly 1.8–2.4 meters, with a modest widening beside the meeting-hall entrance. The scoped corridor has one explicitly established hall doorway, shown as a broad double-leaf opening; other facade openings and vertical circulation elements are not established.", "applied_shots": [ "S77_Shot2" ], "group_id": "bg_police_headquarters_hall", "depends_on_fp": [] } }, "consumed_bg_catalog_hash": "5a616909d058e78a", "consumed_shot_binding_hash": "0e6409db6be3cc20" }, "step_id": "floor_plan_prompt", "run_id": "28921dcb-def9-4d2b-a250-66a57f282448", "resolved_model": "gpt", "updated_at": "2026-08-14T20:55:27.024858+00:00", "project_config_snapshot": {} }