Draw a single CAMERA-VIEW storyboard frame (16:9) of the scene staged
on the attached MARKER-ANNOTATED TOP-DOWN SITE PLAN, seen from the
camera position marked on it.

The attached plan carries STAGING MARKERS drawn over it: a
camera-position marker with a straight sight line (where the camera
stands and which way it looks) and one labelled circle per subject
(where each subject stands). Jurisdiction of sources — follow all three, they do not
conflict:
- The SITE PLAN under the markers is the SOT for what exists on the
  site and how its zones and landmarks are arranged relative to each
  other. The markers themselves are staging aids, NOT site content.
- The markers on the plan are the SOT for XY POSITIONS and
  horizontal heading ONLY: where each subject stands on that plan,
  where the camera stands, and which way it looks. Distances,
  directions and relative depths between subjects come from the
  marked positions. The STAGING GEOMETRY text below restates the
  same staging with coarse normalized estimates — it never overrides
  the marked plan. Subjects outside the camera's horizontal field of
  view are out of frame.
- The CAMERA DIRECTION text below (when present) is the SOT for the
  VERTICAL angle, elevation, tilt and framing (eye-level, high angle,
  overhead crane, low angle, ...). If it asks for a high or overhead
  angle, draw that angle — the site plan being top-down does NOT mean
  the frame must be eye-level.